I have been running CM (currently CM11) on my SGS4 since I bought it from Sprint in summer 2013. However, Sprint changed their international partners pretty seriously in the past 2 years, so I *really* need a PRL update for international travel. Normally the easiest way to do this is to reboot to stock or TriForce, run the "update PRL" and "update Profile" options from in TriForce, and go on with my life.
But I encrypt my phone. So I had to boot into TWRP, wipe and format *everything* and make sure the phone came up unencrypted in CM. All is OK.
So I reboot, flash TriForce 5.4 custom with stock (not KK) kernel. Flash works fine, I reboot... and am prompted to decrypt the device before I can do anything. None of the decryption passwords I've used in the past (I checked my password safe) are working. When I flash back to CM, it boots fine, and the settings says that the device is not encrypted.
I downloaded and tried TriForce 5.2 and 4.0, both are giving the same problem. I have used TriForce in the past on this phone, so it SHOULD be fine....?
Someone in #twrp said that the location of the encryption key changed from Android 4.4 to 5.0. So my only remaining thought now is that there was also a change from 4.3 to 4.4, and the encryption key for 4.3 didn't get removed in the wipe, and since the partition is NOT encrypted, the decryption, even if I have the right key, fails, so I can't get into the phone. Hope that makes sense.
Anyone have any guess better, or, if I'm right, know what I need to move/edit to fix this?
Followup: IRC #sgs4 suggested a full install of stock via odin, so I'll be trying that on Saturday, after I can get a new stock rom downloaded overnight. if there are thoughts before then, I'd love 'em.
docsmooth said:
Followup: IRC #sgs4 suggested a full install of stock via odin, so I'll be trying that on Saturday, after I can get a new stock rom downloaded overnight. if there are thoughts before then, I'd love 'em.
Click to expand...
Click to collapse
Followup - this was never solved before I dropped the phone and shattered the screen (literally days after this post). So if someone runs into the same thing... good luck.
docsmooth said:
Followup - this was never solved before I dropped the phone and shattered the screen (literally days after this post). So if someone runs into the same thing... good luck.
Click to expand...
Click to collapse
Thanks for the update, I was actually going to suggest stock ODIN instead of TriForce, but you are saying it did not work ? It's good to know for the future. I was initially going to encrypt my phone a long time ago, but I had concerns about decryption when switching ROMs.
My question is why the encryption was not removed after the format ? I've used TWRP to pretty much hose out everything inside the phone, so it's possible the encryption location is located somewhere else. I came across this article:
http://money.cnn.com/2015/05/21/technology/resell-android-phone/
So I guess even after a complete wipe everything ISN'T removed. Maybe your encryption was also stuck as well.................................... What new phone are you getting ?...................................
mikeprius said:
Thanks for the update, I was actually going to suggest stock ODIN instead of TriForce, but you are saying it did not work ? It's good to know for the future. I was initially going to encrypt my phone a long time ago, but I had concerns about decryption when switching ROMs.
My question is why the encryption was not removed after the format ? I've used TWRP to pretty much hose out everything inside the phone, so it's possible the encryption location is located somewhere else. I came across this article:
So I guess even after a complete wipe everything ISN'T removed. Maybe your encryption was also stuck as well.................................... What new phone are you getting ?...................................
Click to expand...
Click to collapse
I was never able to get the stock odin download. The whole problem came up because I was going overseas... I got around it by just buying a local SIM rather than using the Sprint roaming (again, I was doing all this just to update the PRL. new GSM SIM = no PRL update needed). On the way home less than a week later, I cracked the screen so bad the LCD and backlight wouldn't even go on.
I replaced it with a Nexus 6. A bit big, but it doesn't suffer Samsung software awfulness, so I didn't have to flash it with CM to make it usable.
Related
Hello,
Please Help!! My stock (firmware but rooted) TMO Tab started locking up and then progressed into constant reboots, lockups and semi hard resets (I lose all screens and they are back to stock, email accounts are gone in stock client, but apps are still there and a lot of other information is still there like wifi, bluetooth setting/devices etc.) Also, sometimes, the device hangs on the Samsung logo on boot up and I have to power down holding the button for 10 seconds and then turn back on..
It is almost like I got a virus. I did a hard reset the other night, went to bed with about 80% battery and it was completely dead in the morning. Last night went to bed with 91% and it was dead in the AM. Something is wrong and draining my battery.
Tmo is not standing behind their product because I bought it without a contract and said Samsung would either refund me or send me a new one(which I knew it couldn't be right), and it wasn't. They said send it in for 10-14 days and they will send me a working model.
So given all the problems I am having which seem to be software related, which software should I install? Something I won't have problems with or will still allow me to accept future Tmo updates if needed or wanted.
Also I am upset over the email limit(one month unlike the VZ version etc) on the stock email client so a Euro version would be fine if it had that feature and I also am not using the Tmo network so a disabled 3G network for data is not a problem.
Thanks for your help and suggestions.
Best,
BC
Please help me...
Update: My Tab was stuck on the Samsung logo for the longest time this morning(like 3 hours). I did the volume up/power button and wiped but still was stuck. It finally booted up but I am sure it is going to lock up and I will have to go through the same thing hoping to get it to boot up.
What could've caused it? What should I do while i have it on? Should I update to the Euro software and if so, which one? There are so many choices and not sure which one to do. Also, would I be able to go back to the stock tmobile s/w if I can return it for a replacement?
One thing that i noticed in the apps is a folder called error 1.0.0 but I cannot uninstall it. Is this normal and does anyone else have it? The other thing is that I still have the same memory available as when I had all my apps, email etc in it. Like it didn't really erase everything.
Please help and point me in the right direction. I have been scouring the net for 4 hours now and I don't know which way to go.
Thank you,
BC
Perhaps you poked around in the files system and accidently removed something? I would go to the Roto Stock firmware package thread, and flash that to repair a corrupt file system. Only a guess on my part, but it won't do any harm.
Well I suppose but I don't recall messing around with anything. I was hoping that while I had to change or repair my software, I should put the best on that there is to offer.
What software do you use or recommend?
Thanks for the reply! This is driving me crazy! I have had to turn off and back on at least 15 times today trying to get it to work amd habe wiped like 5 times.
Do you think I should just try and get a replacement from tmobile?
Thanks,
Brian
Woah, slow down partner. Make a Titanium Backup to the external sd card then remove it. Flash Rotohammers stock T Mobile firmware. Reroot with SuperOneCLick. Reinsert the external SD and reinstate your apps with Titanium. If things are still wonky after that then it's probably a hardware problem.
EDIT: I'd flash using Odin 1.7. It's just easier than Heimdall to me. Personal preference I suppose.
halftonehero said:
Woah, slow down partner. Make a Titanium Backup to the external sd card then remove it. Flash Rotohammers stock T Mobile firmware. Reroot with SuperOneCLick. Reinsert the external SD and reinstate your apps with Titanium. If things are still wonky after that then it's probably a hardware problem.
EDIT: I'd flash using Odin 1.7. It's just easier than Heimdall to me. Personal preference I suppose.
Click to expand...
Click to collapse
I did the backup and reinstalled after one of the wipes but it keeps locking up and not booting up. I haven't had it on 1 time successfully yet today and it past 10PM...
The main reason I would like a different firmware is because I want the full functionality of the email client like in some of the other tabs and android devices.
Tmobile and i don't know who else (I read ATT) crippled the email and it doesn't have the option to have all email on the device which is great for short trips without the laptop.
What about some of Roto's other firmwares? Like i said previously, I am not using Tmobiles data or service so it doesn't matter. I also read that the browser and overall was really smooth.
Is it ok to root with z4root? I have the app on my sd card and that is how i've done it before.
Thanks for your suggestions and i appreciate all feedback. I have to do something because this device has become a paperweight.
Thank you,
BC
bconfer said:
I did the backup and reinstalled after one of the wipes but it keeps locking up and not booting up. I haven't had it on 1 time successfully yet today and it past 10PM...
The main reason I would like a different firmware is because I want the full functionality of the email client like in some of the other tabs and android devices.
Tmobile and i don't know who else (I read ATT) crippled the email and it doesn't have the option to have all email on the device which is great for short trips without the laptop.
What about some of Roto's other firmwares? Like i said previously, I am not using Tmobiles data or service so it doesn't matter. I also read that the browser and overall was really smooth.
Is it ok to root with z4root? I have the app on my sd card and that is how i've done it before.
Thanks for your suggestions and i appreciate all feedback. I have to do something because this device has become a paperweight.
Thank you,
BC
Click to expand...
Click to collapse
hey dude you sound nervous as hell man, relax. as long as you can get your phone in to download mode. you will be ok. flash rotos tmobile stock firmware. if it works hooray! if not flash rotos jme 4
Still out of commission
I am not nervous, just annoyed as hell.
I flashed the stock tmobile firmware, booted it up and it crashed after about 10 minutes and I am back stuck on the samsung logo. I haven't been able to get it to boot up for about 5-6 days. I have wiped many times and no dice.
Should I wipe cache partition? Try the JME software?
Thanks for your help!
BC
So, I have read a lot about TWRP sometimes bugging out and randomly encrypting phones and adding a password to which the user either never set it up or that TWRP doesn't accept it. This has recently happened to me and I cannot use my phone and I don't know what to do.
I have had the bootloader of my phone unlocked since day 1 when I bought my phone (release date last year) and have been running PA ever since. I have never had any problems with it, until about 5 days ago, when I grabbed my phone and everything started crashing and the camera was apparently not available. I didn't know what was the deal with it, so I rebooted the phone and it entered a bootloop (it hangs on the Google logo for about 5 minutes and then it hangs on the PA logo screen forever). I went on to the bootloader and started TWRP to see what was the deal. I originally wanted to grab certain files off the phone in case I had to do a system format, but when I got to TWRP, it asked me for a password which I have never set up and I tried every combination I could think of but it always failed. Everything was encrypted and without the password I couldn't get to it. I tried wiping everything including a factory reset before resorting to a system format (which I read about it and apparently is meant to be the solution). Everything failed because it couldn't access the /cache, /data, nothing. I went on to do a system format and although that is meant to wipe the phone and remove encryptions, it also failed to wipe the /cache and although TWRP says that the wipe is successful, the phone is still encrypted, the password is still around and it bootloops. I have tried the system format like 50 times and always the same.
Can anyone help me out with this? I am currently travelling around but am at a hostel where there is great internet and pcs, so I can install drivers, toolkits and such. I actually started looking around for new phones, since I cannot for the life of me get the phone to start again.
Note: The phone was working perfectly fine, I put it down to have dinner and once I finished, I tried to use it and it started to bug out. I also read around about this, and everyone's issue gets fixed after a system format.
Any help, would be greatly appreciated, that phone is the only net device I have on this trip and it sucks to not have any way to contact anyone.
Thanks.
Bump
Don't blame TWRP for something it doesn't do.
Looks like your device have an EMMC failure, sorry.
You can try installing factory image, or last resort restoring by download mode, but I think the flash memory in your phone is gone.
http://forum.xda-developers.com/showthread.php?t=2347060
sent from nexus 4
eksasol said:
Don't blame TWRP for something it doesn't do.
Looks like your device have an EMMC failure, sorry.
You can try installing factory image, or last resort restoring by download mode, but I think the flash memory in your phone is gone.
http://forum.xda-developers.com/showthread.php?t=2347060
sent from nexus 4
Click to expand...
Click to collapse
I didn't mean to blame TWRP. It is just that it was when I am on it that I get asked for the password and I was under the impression that it was TWRP that did the encrypting (I am in no way a developer or even very knowledgeable when it comes to the under the hood stuff, I usually only follow the tutorials). But thanks for the reply and the link, I will try that and hopefully get the phone back working.
Also, I did read in a thread that apparently this can occur due to hardware failure, I was just hoping this wasn't the case.
This happened to me on an old phone. Not sure why. Factory image fixed it. Could be a different issue but its worth a shot.
Sent from my Nexus 4 using XDA Premium 4 mobile app
It's happening to me now too
Sent using T-Mobile S4 4.3 MK2
LEGEND94 said:
It's happening to me now too
Sent using T-Mobile S4 4.3 MK2
Click to expand...
Click to collapse
Did it suddenly happen or did you change ROMs?
I tried a new rom for the first time and then went back to wicked 9.1, I'm thinking that triggered something.
I think I got a fix though, look here: http://forum.xda-developers.com/showthread.php?t=2588377
Sent using T-Mobile S4 4.3 MK2
Well for starters, high everyone!
I have an issue with my S4 and I've searched all over but none of what has been recommended helps.
The issue I have is that my phone will restart about every 10 minutes (give or take). I used Reboot Logger to determine this. The phone only restarts when it is idle. It WILL NOT restart if I am using it (screen is on). The weird part is that it doesn't even go through the whole reboot sequence. The screen will stay black the entire time. The notification button pulses and the home buttons will light up like it was restarting though.
I had a bad battery and had it replaced with a stock Samsung battery. I've tried pulling the SD card, pulling the battery for 10 minutes, pulling the battery while the phone is on, and I've performed two factory resets.
The one thing I have noticed is that, after performing the factory reset, I get an "error" under the little android dude. This also happens if I do a cache wipe.
My model is the SPH-L720 running on android v4.3. The phone has never been rooted and there are no software or firmware updates that are found.
I was beginning to think that this was a hardware issue but the consistency in reboot intervals makes me believe otherwise. At this point I'm at a loss. I rooted my old phone but my experience in that area is very limited. I have read that the cache partition is bad from the factory on some of these (hence the error message) so I was thinking about rooting the phone and trying to use a good cache partition, but that's the only other option I could think of.
sounds like a voltage prob....or mem prob... id redownload a new rom..wipe wipe wipe..reinstall and that should fix it
Sent from my SPH-L720 using xda app-developers app
Insufficient voltage at idle was my first thought too, but if you haven't undervolted (since you aren't even rooted), that seems less likely. If I were you, I'd root the phone so I could do more to figure things out. Maybe try bumping up the voltage a little on the lower clock speeds.
Ok, first of all, do not root your phone. As you admitted yourself, you have limited experience in this area, and there is nothing that rooting will do for you. Not to mention, if you think you have a bad cache partition, you don't need root to fix it. Your phone is stock, running the stock kernel, there is no reason to suspect voltage issues that are not hardware related. If you root the phone, you will likely trip KNOX, and void your warranty.
My personal opinion is that your phone has a hardware problem. If you want to truly start over, either recover your phone through KIES, or better yet, download and flash via ODIN a stock MK2 ROM from this forum. Since this is a stock, signed ROM, you will not trip KNOX, and it will rewrite every partition properly on it's own. This is all assuming you don't have a hardware problem. But do not go ahead and try to fix anything yourself besides what I mentioned. You will not succeed, and likely lose your warranty in the process.
Edit: did you buy this phone new or used? If you bought it used, more than likely somebody ruined it for you. And more than likely, you can fix it. If this was a new device, more than likely it will be a warranty issue. That's why you shouldn't do anything to void the warranty.
If you're going to use odin for anything, just make sure you follow someone's directions step by step. Otherwise very bad things can happen.
im also having a slightly similar problem
Problem : The screen after a sleight amount of time of being on, or sometimes instantly when opening the lockscreen it freezes for 10-15 sec then shoots black lines across it, then reboots.
Things ive tried :
1. Installing a new rom ( from AOKP 4.4 and Triforce 4.3)
2. Changing modem (from MJA, MK2, NAE)
3. Changing the type
of Gapps i was using. (4.3 gapps for triforce, aokp 4.4 gapps, and pa gapps)
Current Phone Info:
Rom: aokp_jfltespr_kitkat_nightly_2014-02-08
Modem/Firmware: NAE
Gapps: Pa.gapps 4.4.x
Let me know if you need anything more! plz!
I'll look into Odin before I root. The phone was also purchased new. I spent most of today monkeying around with different settings to see if I could trigger the issue as well. As it turns out, the phone will only restart at idle if it's plugged into the charger, or the wifi is on. If wifi is off and it's not plugged in it's fine. I am also using the stock Samsung charger that came with the phone. Again though, if I'm actively using the phone it doesn't happen (charging or connected to wifi). I did turn the phone off earlier to charge it but would keep freezing at the sprint logo upon boot up. I thought it was bricked for a second... I wiped the cache (didn't do a factory reset) and that fixed it, but now I have that stupid issue where videos won't play on wifi, only on 4G or 3G. It's an issue I thought I had solved.
Le sigh. This is frustrating. The Odin option is looking to be my best bet it seems.
Tizamarou said:
im also having a slightly similar problem
Problem : The screen after a sleight amount of time of being on, or sometimes instantly when opening the lockscreen it freezes for 10-15 sec then shoots black lines across it, then reboots.
Things ive tried :
1. Installing a new rom ( from AOKP 4.4 and Triforce 4.3)
2. Changing modem (from MJA, MK2, NAE)
3. Changing the type
of Gapps i was using. (4.3 gapps for triforce, aokp 4.4 gapps, and pa gapps)
Current Phone Info:
Rom: aokp_jfltespr_kitkat_nightly_2014-02-08
Modem/Firmware: NAE
Gapps: Pa.gapps 4.4.x
Let me know if you need anything more! plz!
Click to expand...
Click to collapse
Since you are running a custom source-built ROM, first thing to do would be to ODIN a stock ROM. If the problems go away, you have your answer. If not, this would likely be a warranty issue. Of course you tripped KNOX most likely already.
sputnik767 said:
Ok, first of all, do not root your phone. As you admitted yourself, you have limited experience in this area, and there is nothing that rooting will do for you. Not to mention, if you think you have a bad cache partition, you don't need root to fix it. Your phone is stock, running the stock kernel, there is no reason to suspect voltage issues that are not hardware related. If you root the phone, you will likely trip KNOX, and void your warranty.
My personal opinion is that your phone has a hardware problem. If you want to truly start over, either recover your phone through KIES, or better yet, download and flash via ODIN a stock MK2 ROM from this forum. Since this is a stock, signed ROM, you will not trip KNOX, and it will rewrite every partition properly on it's own. This is all assuming you don't have a hardware problem. But do not go ahead and try to fix anything yourself besides what I mentioned. You will not succeed, and likely lose your warranty in the process.
Click to expand...
Click to collapse
Alright I'm a little confused as to what exactly I should be using. I found this:
http://forum.xda-developers.com/showthread.php?t=2575470
which is a stock ROM. Although I also found this:
http://forum.xda-developers.com/showthread.php?t=2259513&highlight=odin
which is the stock firmware.
Which one do I use, or do I use both of them?
Dfeeds said:
Alright I'm a little confused as to what exactly I should be using. I found this:
http://forum.xda-developers.com/showthread.php?t=2575470
which is a stock ROM. Although I also found this:
http://forum.xda-developers.com/showthread.php?t=2259513&highlight=odin
which is the stock firmware.
Which one do I use, or do I use both of them?
Click to expand...
Click to collapse
Neither. Use this one : http://forum.xda-developers.com/showthread.php?t=2601443
Follow instructions in the thread. This is a completely stock rom with no root or mods and will not trip the Knox bootloader. If you flash anything other than this, including custom recovery, cf autoroot, etc, you will void your warranty.
rebooting
i had this problem once and it was related to a corrupt file on my sdcard believe it or not. there are Defraggers out there for your android file system and internal SD card but your Ext sc you would have to do on your PC. it worked for me. the one i used is called CLEAN i got it off amazon app store.
cyberweasal
Dfeeds said:
Well for starters, high everyone!
I have an issue with my S4 and I've searched all over but none of what has been recommended helps.
The issue I have is that my phone will restart about every 10 minutes (give or take). I used Reboot Logger to determine this. The phone only restarts when it is idle. It WILL NOT restart if I am using it (screen is on). The weird part is that it doesn't even go through the whole reboot sequence. The screen will stay black the entire time. The notification button pulses and the home buttons will light up like it was restarting though.
I had a bad battery and had it replaced with a stock Samsung battery. I've tried pulling the SD card, pulling the battery for 10 minutes, pulling the battery while the phone is on, and I've performed two factory resets.
The one thing I have noticed is that, after performing the factory reset, I get an "error" under the little android dude. This also happens if I do a cache wipe.
My model is the SPH-L720 running on android v4.3. The phone has never been rooted and there are no software or firmware updates that are found.
I was beginning to think that this was a hardware issue but the consistency in reboot intervals makes me believe otherwise. At this point I'm at a loss. I rooted my old phone but my experience in that area is very limited. I have read that the cache partition is bad from the factory on some of these (hence the error message) so I was thinking about rooting the phone and trying to use a good cache partition, but that's the only other option I could think of.
Click to expand...
Click to collapse
sputnik767 said:
Neither. Use this one : http://forum.xda-developers.com/showthread.php?t=2601443
Follow instructions in the thread. This is a completely stock rom with no root or mods and will not trip the Knox bootloader. If you flash anything other than this, including custom recovery, cf autoroot, etc, you will void your warranty.
Click to expand...
Click to collapse
That solved my problem, thank you! I spent the last couple days testing it just to be sure I wouldn't be crying wolf. The phone has yet to restart on me even while charging or using wifi. The error message I would receive after a cache wipe or factory reset went away as well. It makes me wonder if the bad partition was what caused my old battery to fail.
Dfeeds said:
That solved my problem, thank you! I spent the last couple days testing it just to be sure I wouldn't be crying wolf. The phone has yet to restart on me even while charging or using wifi. The error message I would receive after a cache wipe or factory reset went away as well. It makes me wonder if the bad partition was what caused my old battery to fail.
Click to expand...
Click to collapse
Great, I am glad it worked out, and hopefully your problem is resolved. I doubt that your old battery failed due to a bad partition, and I have to wonder how your partition got messed up in the first place, but that's just a curiosity and is irrelevant in the grand scheme of things. Just remember that if you decide to root, cf_autoroot works but will trip the KNOX bootloader and potentially void your warranty.
I made the mistake of encrypting my phone and am now paying the price. It is rooted and I had installed the Google Edition 4.4.2 ROM by Danvdh, Kryten2k35 & Ktoonsez. I'm using TWRP 2.7.0.1.
I first tried going into recovery and doing a factory reset and got the an "Unable to mount '/data'" error, followed by a big red FAIL. So I rebooted into the system and tried to do a factory reset from there. Went through all the steps, phone rebooted into recovery and I got the same error - unable to mount.
So I did a bit of searching on the forums here and someone had suggested using the format option in TWRP. So I did that and it seemed to work - did not get the dreaded unable to mount error. So I tried flashing the new rom (the updated version from a couple of weeks ago). Got a message indicating it was successful. Rebooted, and to my dismay, got the prompt for the encryption password. Saw the little line drawing Android, then... nothing - I found myself in brick land.
Managed to get back into TWRP and, based on another post I found, tried Advanced Wipe, selecting everything except Micro SDcard and USB-OTG. Tried installing the new ROM again, says successful, but nothing has changed - I still boot into blackness after inputting my encryption password.
Not sure what else to try. Any suggestions would be most appreciated.
not_su said:
I made the mistake of encrypting my phone and am now paying the price. It is rooted and I had installed the Google Edition 4.4.2 ROM by Danvdh, Kryten2k35 & Ktoonsez. I'm using TWRP 2.7.0.1.
I first tried going into recovery and doing a factory reset and got the an "Unable to mount '/data'" error, followed by a big red FAIL. So I rebooted into the system and tried to do a factory reset from there. Went through all the steps, phone rebooted into recovery and I got the same error - unable to mount.
So I did a bit of searching on the forums here and someone had suggested using the format option in TWRP. So I did that and it seemed to work - did not get the dreaded unable to mount error. So I tried flashing the new rom (the updated version from a couple of weeks ago). Got a message indicating it was successful. Rebooted, and to my dismay, got the prompt for the encryption password. Saw the little line drawing Android, then... nothing - I found myself in brick land.
Managed to get back into TWRP and, based on another post I found, tried Advanced Wipe, selecting everything except Micro SDcard and USB-OTG. Tried installing the new ROM again, says successful, but nothing has changed - I still boot into blackness after inputting my encryption password.
Not sure what else to try. Any suggestions would be most appreciated.
Click to expand...
Click to collapse
Can you go into download mode, revert back to a stock rom (or flash a stock one or something) and turn encryption off? edit: on further research it looks like the only way to completely unencrypt is to reset your device. dunno if that's something you'd want to try, but considering you already wiped multiple times.. i'd say try it?
Also what carrier do you have? That's pretty important. AT&Ts i337 and Verizon's variant cannot flash AOSP roms (more specifically, kernels) due to the bootloader being locked. That might be the issue you're experiencing? I looked up the ROM and it's using ktoonsez kernel, so I imagine that'd be why. Someone just made a version that does not include the kernel and has multiple issues the ROM you're trying to use fixed here.
Rhymey said:
Can you go into download mode, revert back to a stock rom (or flash a stock one or something) and turn encryption off? edit: on further research it looks like the only way to completely unencrypt is to reset your device. dunno if that's something you'd want to try, but considering you already wiped multiple times.. i'd say try it?
Thanks - that's exactly what I've been trying to do. I haven't tried reflashing back to stock with Odin though. Hmmm...
Also what carrier do you have? That's pretty important. AT&Ts i337 and Verizon's variant cannot flash AOSP roms (more specifically, kernels) due to the bootloader being locked. That might be the issue you're experiencing? I looked up the ROM and it's using ktoonsez kernel, so I imagine that'd be why. Someone just made a version that does not include the kernel and has multiple issues the ROM you're trying to use fixed here.
Click to expand...
Click to collapse
Bell, up here in the Great White North. I don't think locked bootloader is an issue - I was on the previous version of Danvdh's ROM, and everything was hunkydory. I just made the unfortunate decision to encrypt. Big mistake.
May try flashing back to stock. Nothing to lose, at this stage...
Thanks!
Hey just wanted to mention for the benefit of anyone else who got into this bind, flashing back to stock using Odin did the trick. Still wouldn't boot, but then I rebooted into stock recovery and did a factory reset, and finally was able to reboot back into stock. What a nightmare. Ugh. Thanks for the tip though - never occurred to me to try to go back to stock. Lesson learned though - no more encryption for me!
not_su said:
Hey just wanted to mention for the benefit of anyone else who got into this bind, flashing back to stock using Odin did the trick. Still wouldn't boot, but then I rebooted into stock recovery and did a factory reset, and finally was able to reboot back into stock. What a nightmare. Ugh. Thanks for the tip though - never occurred to me to try to go back to stock. Lesson learned though - no more encryption for me!
Click to expand...
Click to collapse
Good to hear. Should be able to flash to the rom once again no problem now that it's unencrypted!
Hello everyone,
So here's my story: I got a 6P short after release and it's been amazing. After switching from a S6 I couldn't be happier until 3 days ago.
I was playing around with my phone (checking for updates on the play store if I recall correctly) and I was going to switch from 4g to wifi. I went ahead and pulled down my notification shade and went to press WiFi but misclicked and hit Hotspot which was below it. My phone suddenly froze big time and this is for the first time ever since purchase.
At first I thought I'd wait it out since the device was completely unresponsive, home button didn't work and neither did anything on screen. Buttons didn't make a difference either. 10 minutes went by and I ended up force restarting by holding down power + volume up. First part of my bootup went fine but when it got to the android boot animation after I put in my pin to allow the device to start it dropped from the smooth usual framerate down to 1 frame every 10-15 seconds and it slowed down further until it came to a complete halt around the time the android letters appear.
My first thought was corrupt rom so I went ahead and wiped data from the stock recovery. I was running completely stock with no modifications whatsoever. That didn't do anything. Phone still froze in the same boot phase. Desperate I unlocked bootloader to flash a clean fresh image to try to fix it and to my surprise that didn't change a thing.
As I was getting pretty desperate already I had one more idea and that was to flash up to the Dev preview. To my huge surprise it booted and I jumped from excitement. So I started setting up my phone again. I got past the prompt to insert sim card and I was now at the screen to choose a wifi network. As soon as I clicked into that the phone froze up again and at that point I lost all hope.
I wiped data in stock recovery and shut the phone down for the night. On day 3, today I woke up and tried starting the phone and it worked as if nothing had happened. I went through the setup and set up my phone on the N preview. At a certain point I was planning to go back to the latest official build but for now I was happy my phone was back from the dead. Later today I tried to restart my phone to clear all running apps etc and it froze up on boot.
I'm losing all hope that I'll be resolving this myself so I'm reaching out to the community to see if anyone's had this happen to them before and hopefuly for a solution. It's still under warranty so I can eventually send it back to the retailer but I'd rather not have a phone for 3 weeks.
Any and all help is appreciated.
Thank you for reading through my long and probably pretty boring story!
Have you tried flashing the factory image? If yes, did you made sure to wipe/erase the system, boot, vendor, and cache partition before flash the corresponding img files?
To the OP, is there any reason you did not flash to release version 6 instead of Dev preview ?
Also, any reason you can not simply do the "unenroll" from https://www.google.com/android/beta ?
It will require you to setup certain settings again as you will be back to a "factory reset".
DJBhardwaj said:
Have you tried flashing the factory image? If yes, did you made sure to wipe/erase the system, boot, vendor, and cache partition before flash the corresponding img files?
Click to expand...
Click to collapse
DJBhardwaj, i haven't specifically erased those partitions. I was under the impression wipe userdata along with reflashing did that. I will try that tonight when I get home!
Xdafly, I only updated up to N as a last resort because at first I had a locked BL. I was planning to unenrol but that would've been too late as it self bricked after a restart.
DJBhardwaj said:
Have you tried flashing the factory image? If yes, did you made sure to wipe/erase the system, boot, vendor, and cache partition before flash the corresponding img files?
Click to expand...
Click to collapse
Well I just did the erase thingy and my phone booted but wifi won't turn on. Enabling hotspot doesn't brick anymore but I now suspect WiFi might've been the issue. Any tips on how to find out what it could be and possibly fix it?
Edit: 2 restarts and a factory reset later I'm back to bricked same way as before.
try safe mode
mr.dj26 said:
try safe mode
Click to expand...
Click to collapse
That was my first thought, that was the restart that bricked it again. Safe mode shouldn't have made a difference since I hadn't even logged into Google account for apps.
After reading the very first post; sounds like bad WiFi hardware.
All the hanging has been related to WiFi or Hotspot.
I think you should get a replacement
Sent from my Purified NexusixP
If Someone Helped You Then Dont Just say Thanks...Hit The Thanks Button!
Is your phone rooted and did you install Xposed?
Over the weekend I shutdown my 6p (stock rooted with April security patch, Xposed v80) and charged it. When it turned it back up I kept getting "Unfortunately, nfc service has stopped". Long story short: I ended up factory reset my phone and reinstalled EVERYTHING and I still got into bootloop. Then I came across
https://github.com/rovo89/Xposed/issues/113
https://github.com/rovo89/android_art/issues/28
At the end of the second post rovo89 (developer of Xposed) fixed the bug in V83. I wiped my 6p once more and installed everything with v83. Problem solved.
Good luck!