Database Users

Numerous things crapped out on my GT540 [Bricked?]

Hi guys
There are numerous things wrong with my phone, but i'll just go though the series of events:
[ Video of attempted boot Search LG GT540 Bootlooping on ytube, first video ]
1: Tried to install a rom that requires bigger partition size [Enigma rom, mikegapinksi's ICS rom etc]
2: found out how to change partition size [Mur4ik's tool] does so.
3: Engima rom fails to install from clockwork mod, tries fastboot but gets the infamous Too Many Links error, still able to write the boot image and recovery image though...
4: Tries to boot device, White LG Logo normally appears, swiftdroid logo briefly appears and then the normal LG flashy bootanimation, but after that, nothing.
5: Trying to write a system image to the phone using the Fastboot commandline reports "flash_write_image: image undersized (128 < 2112) on the device itself, and remote write failure on the PC
KDZ seems to throw various errors, WParam: 100 and Lpara,:1002 etc., sees the device in "scan for phone" though
Fastboot mode and Recovery still work, but booting normally throws normal LG Logo, then swiftdroid briefly, then Flashy LG bootanimation but NO FURTHER
Any help [Reccomended ROMs, procedures etc.] would be VERY much appreciated thanks ^^

Trust me ur phone is not bricked!
Although it is a bit stuffed up, If u can flash fastboot
again using KDZ and everything will be solved!

Just to clarify, do you want to reflash a fastboot image on to my phone?
if so, how would I do that?

Yes just flash fastboot again using KDZ.
Its not an img its a rom..

I can't use bootloop nor download anymore after leaving the battery out, And Hard reset does nothing in either modes. ClockworkMod still boots fine and i've had KDZ pick up the phone form that before...
DAMN!
Upgrade Error
Wparam: 100
LParam: 1002
Log as Follows:
[R&D Test Tools Log File]
17:32:00 : Launching SW update
17:32:00 : Unpacking KDZ
17:32:05 : KDZ file extraced
17:32:09 : Files were extracted.
17:32:09 : LGMobileDL Load.
17:32:09 : Port = -1
17:32:09 : Connecting to phone
17:32:19 : Check Phone mode = 1
17:32:38 : Phone type check.......
17:32:38 : LGMobileDL.DLL Loading....
17:32:38 : _SetAuthMark Ok : wAuthMark(5856)
17:32:38 : _DetachDLL Call
17:32:38 : _DetachDLL Call End
17:32:38 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10e-IND-XX-MAR-28-2011+0-DZ.dz
17:32:38 : Param : moduleDir =
17:32:38 : Param : waitTime = 0
17:32:38 : Param : UsbHighSpeed = 1
17:32:38 : Param : PhoneMode = 1
17:32:38 : Param : BinVersion = V10E_00
17:32:38 : Param : AuthMark = 5856
17:32:38 : Call fn_StartUpgrade
17:33:02 : 3GQCT : wParam = 4, lParam = 0
17:33:02 : Step Complete : DLOAD Change
17:33:42 : 3GQCT : wParam = 100, lParam = 1002
17:33:42 : Step : Upgrade Error error code = 1002
17:33:42 : ResetStartInfo() Call
17:33:42 : _DetachDLL Call
17:33:42 : _DetachDLL Call End
17:33:42 : FreeLibrary Call
17:33:42 : FreeLibrary Call End
17:33:42 : ResetStartInfo() Call End
17:33:42 : ===FINISHED===
This is what i meant by KDZ being an A******

I think it died, the power button does ABSOLUTELY nothing, and KDZ doesn't recognize it when I plug it in any more

if u think u've briked ur phone,try this
if u think u've briked ur phone,try this
it may work !!
http://forum.xda-developers.com/showpost.php?p=13205397&postcount=26
or
http://mygt540.com/tuts/faq-my-phone-is-bricked-guide/

my phone cant flash
[R&D Test Tools Log File]
22:18:52 : Launching SW update
22:18:52 : Unpacking KDZ
22:19:01 : KDZ file extraced
22:19:16 : Files were extracted.
22:19:16 : LGMobileDL Load.
22:19:16 : Port = -1
22:19:16 : Connecting to phone
22:19:36 : Check Phone mode = 1
22:19:36 : Phone type check.......
22:19:36 : _DetachDLL Call
22:19:36 : _DetachDLL Call End
22:19:36 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\v20b.dz
22:19:36 : Param : moduleDir =
22:19:36 : Param : waitTime = 0
22:19:36 : Param : UsbHighSpeed = 1
22:19:36 : Param : PhoneMode = 1
22:19:36 : Param : BinVersion = out
22:19:36 : Param : AuthMark = 0
22:19:36 : Call fn_StartUpgrade
:crying:

failed

Hello, i failed to flash v10k_00, rooted, unlocked bootloader and CWM ror throght KDZ.
It shows:
18:46:47 : Launching SW update
18:46:47 : Unpacking KDZ
18:48:34 : KDZ file extraced
18:49:57 : Files were extracted.
18:49:57 : LGMobileDL Load.
18:49:57 : Port = -1
18:49:57 : Connecting to phone
18:50:06 : Check Phone mode = 2
18:50:23 : Phone type check.......
18:50:29 : _DetachDLL Call
18:50:29 : _DetachDLL Call End
18:50:29 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LGP700AT-ROOT-CWM-NewBoot-00-V10k-EUR-XX-FEB-22-2013+0.dz
18:50:29 : Param : moduleDir =
18:50:29 : Param : waitTime = 0
18:50:29 : Param : UsbHighSpeed = 1
18:50:29 : Param : PhoneMode = 2
18:50:29 : Param : BinVersion = V10K_00
18:50:29 : Param : AuthMark = 0
18:50:29 : Call fn_StartUpgrade
18:50:30 : CDMA: wParam = 206, lParam = 0
18:50:30 : Model Dll Msg Not Found(206, 0)
What should i do to flash this success ?
Sorry for bad english.

faters said:
18:50:30 : Model Dll Msg Not Found(206, 0)
Click to expand...
Click to collapse
Those errors are normal, let it finish, it will reboot the phone automatically.

Ok, ill try one more time

same problem and i wait about 10-15min and nothing happen with my phone

UNOSlv said:
same problem and i wait about 10-15min and nothing happen with my phone
Click to expand...
Click to collapse
What phone do you have? I have a L3.Did you try flashing without the battery in your phone. Also what mode are you using diag or emergency

FlowUK said:
What phone do you have? I have a L3.Did you try flashing without the battery in your phone. Also what mode are you using diag or emergency
Click to expand...
Click to collapse
I have L7 , i am using emergency mode and i try one time flash without battery

Downgrade not Work LG L7

Hello.
i will downgrade the LG L7 from 4.1.2 Official Jelly Bean to Ice Cream Sandwich 4.0.3
Ok, go, Start KDZ Flasher, bring the LG l7 in Emergency Mode (Yellow screen), Chose the KDZ file on PC
Klick Update,....
Error: Wparam 100
----------------------------
Error: Lparam 1002
LOG:
[R&D Test Tools Log File]
18:00:07 : Launching SW update
18:00:07 : Unpacking KDZ
18:00:28 : KDZ file extraced
18:00:33 : Files were extracted.
18:00:33 : LGMobileDL Load.
18:00:33 : Port = -1
18:00:33 : Connecting to phone
18:00:43 : Check Phone mode = 1
18:01:01 : Phone type check.......
18:01:01 : LGMobileDL.DLL Loading....
18:01:01 : _SetAuthMark Ok : wAuthMark(1224)
18:01:01 : _DetachDLL Call
18:01:01 : _DetachDLL Call End
18:01:01 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-ROOT-CWM-NewBoot-00-V10k-EUR-XX-FEB-22-2013+0.dz
18:01:01 : Param : moduleDir =
18:01:01 : Param : waitTime = 0
18:01:01 : Param : UsbHighSpeed = 1
18:01:01 : Param : PhoneMode = 1
18:01:01 : Param : BinVersion = V10K_00
18:01:01 : Param : AuthMark = 1224
18:01:01 : Call fn_StartUpgrade
18:01:01 : 3GQCT : wParam = 4, lParam = 0
18:01:01 : Step Complete : DLOAD Change
18:01:22 : 3GQCT : wParam = 206, lParam = 0
18:01:49 : 3GQCT : wParam = 100, lParam = 1002
18:01:49 : Step : Upgrade Error error code = 1002
18:01:49 : ResetStartInfo() Call
18:01:49 : _DetachDLL Call
18:01:49 : _DetachDLL Call End
18:01:49 : FreeLibrary Call
18:01:49 : FreeLibrary Call End
18:01:49 : ResetStartInfo() Call End
18:01:50 : ===FINISHED===

HEY
kevios12 said:
Hello.
i will downgrade the LG L7 from 4.1.2 Official Jelly Bean to Ice Cream Sandwich 4.0.3
Ok, go, Start KDZ Flasher, bring the LG l7 in Emergency Mode (Yellow screen), Chose the KDZ file on PC
Klick Update,....
Error: Wparam 100
----------------------------
Error: Lparam 1002
LOG:
[R&D Test Tools Log File]
18:00:07 : Launching SW update
18:00:07 : Unpacking KDZ
18:00:28 : KDZ file extraced
18:00:33 : Files were extracted.
18:00:33 : LGMobileDL Load.
18:00:33 : Port = -1
18:00:33 : Connecting to phone
18:00:43 : Check Phone mode = 1
18:01:01 : Phone type check.......
18:01:01 : LGMobileDL.DLL Loading....
18:01:01 : _SetAuthMark Ok : wAuthMark(1224)
18:01:01 : _DetachDLL Call
18:01:01 : _DetachDLL Call End
18:01:01 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-ROOT-CWM-NewBoot-00-V10k-EUR-XX-FEB-22-2013+0.dz
18:01:01 : Param : moduleDir =
18:01:01 : Param : waitTime = 0
18:01:01 : Param : UsbHighSpeed = 1
18:01:01 : Param : PhoneMode = 1
18:01:01 : Param : BinVersion = V10K_00
18:01:01 : Param : AuthMark = 1224
18:01:01 : Call fn_StartUpgrade
18:01:01 : 3GQCT : wParam = 4, lParam = 0
18:01:01 : Step Complete : DLOAD Change
18:01:22 : 3GQCT : wParam = 206, lParam = 0
18:01:49 : 3GQCT : wParam = 100, lParam = 1002
18:01:49 : Step : Upgrade Error error code = 1002
18:01:49 : ResetStartInfo() Call
18:01:49 : _DetachDLL Call
18:01:49 : _DetachDLL Call End
18:01:49 : FreeLibrary Call
18:01:49 : FreeLibrary Call End
18:01:49 : ResetStartInfo() Call End
18:01:50 : ===FINISHED===
Click to expand...
Click to collapse
Firmware Downgrade Is not possible to mobile devices

emilutzzu said:
Firmware Downgrade Is not possible to mobile devices
Click to expand...
Click to collapse
Yes it is.
@kevios12 Read here and you'll be fine.

Thanks.

emilutzzu said:
Firmware Downgrade Is not possible to mobile devices
Click to expand...
Click to collapse
LOL

I did this process and WORKS!

Solved
Nik2468 said:
Yes it is.
@kevios12 Read here and you'll be fine.
Click to expand...
Click to collapse
Thanks a lot! Worked for me as well! I've been struggling for two weeks.

Vrtikolo said:
Thanks a lot! Worked for me as well! I've been struggling for two weeks.
Click to expand...
Click to collapse
Please tutorial how to downgrade LG L7 P700

Can someone write/describe here a downgrade tutorial from 4.1.2 to 4.0.3 for LG L7

otemek said:
Can someone write/describe here a downgrade tutorial from 4.1.2 to 4.0.3 for LG L7
Click to expand...
Click to collapse
you don`t need a tutorial, just flash the ICS kdz over what you have.
I did this downgrade from JB to ICS and it works. Maybe your kdz wasn`t good, try to get the official one.

you should use V10K that homero shared before bro, it work like a charm

Don't work for me v10 zip.I've tried ,but i get bootloop.Now i'm on the last nightly.
Sent from my LG-P700 using xda premium

Try reflashing in emergency mode (volume up + volume down + power button).

factory
after the flash, we must do a factory reset.

cant understand
i lnow this is awkward but I didnt get it..can you please tell me in a simpler language...please

i have written a guide in android development to downgrade... just search downgrade in l7 android development u will find a thread for it
Inviato dal mio LG-P700 usando Tapatalk 4

THANX
Omg omg thank you it worked ^_^

Dead P705

hi i want to upgrade my phone via KDZ, and after that i got error wParam = 100, lParam = 1010, and updater not responding and i can only close that, after that my phone goes emergency mode, pls help
[R&D Test Tools Log File]
10:32:23 : Launching SW update
10:32:23 : Unpacking KDZ
10:32:31 : KDZ file extraced
10:32:41 : Files were extracted.
10:32:41 : LGMobileDL Load.
10:32:41 : Port = -1
10:32:41 : Connecting to phone
10:32:50 : Check Phone mode = 1
10:33:07 : Phone type check.......
10:33:12 : LGMobileDL.DLL Loading....
10:33:12 : _SetAuthMark Fail
10:33:12 : AuthMark°Ў Б¤И®Ич PhoneїЎ Write µЗБц ѕКѕТЅАґПґЩ!
10:33:12 : _SetAuthMark Fail
10:33:12 : LoadCDMAPhoneData() Error
10:33:12 : _DetachDLL Call
10:33:12 : _DetachDLL Call End
10:33:12 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-00-V20d-EUR-XX-MAY-02-2013+0.dz
10:33:12 : Param : moduleDir =
10:33:12 : Param : waitTime = 0
10:33:12 : Param : UsbHighSpeed = 1
10:33:12 : Param : PhoneMode = 1
10:33:12 : Param : BinVersion = V20D_00
10:33:12 : Param : AuthMark = 0
10:33:12 : Call fn_StartUpgrade
10:33:12 : Smart : wParam = 206, lParam = 0
i disabled LG modem, enabled windows enableer

vuvkar said:
hi i want to upgrade my phone via KDZ, and after that i got error wParam = 100, lParam = 1010, and updater not responding and i can only close that, after that my phone goes emergency mode, pls help
[R&D Test Tools Log File]
10:32:23 : Launching SW update
10:32:23 : Unpacking KDZ
10:32:31 : KDZ file extraced
10:32:41 : Files were extracted.
10:32:41 : LGMobileDL Load.
10:32:41 : Port = -1
10:32:41 : Connecting to phone
10:32:50 : Check Phone mode = 1
10:33:07 : Phone type check.......
10:33:12 : LGMobileDL.DLL Loading....
10:33:12 : _SetAuthMark Fail
10:33:12 : AuthMark°Ў Б¤И®Ич PhoneїЎ Write µЗБц ѕКѕТЅАґПґЩ!
10:33:12 : _SetAuthMark Fail
10:33:12 : LoadCDMAPhoneData() Error
10:33:12 : _DetachDLL Call
10:33:12 : _DetachDLL Call End
10:33:12 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-00-V20d-EUR-XX-MAY-02-2013+0.dz
10:33:12 : Param : moduleDir =
10:33:12 : Param : waitTime = 0
10:33:12 : Param : UsbHighSpeed = 1
10:33:12 : Param : PhoneMode = 1
10:33:12 : Param : BinVersion = V20D_00
10:33:12 : Param : AuthMark = 0
10:33:12 : Call fn_StartUpgrade
10:33:12 : Smart : wParam = 206, lParam = 0
i disabled LG modem, enabled windows enableer
Click to expand...
Click to collapse
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<​
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
​
Enjoy your NEW OLD phone

Please Help! how to fix thise upgrade error?

This is off topic. i'm sorry. but i can't find a thread for LG Optimus F3. so please help me to resolve this.
My LG F3 is softbricked now. i tried to flash stock firmware. but in LG KDZ flasher it gives some Wparam and Lparam error messages. i have attached some screenshots of those and the log. does anybody know how to fix this issue? i would really appreciate if you could fix this. THank you very much
View attachment 3043662
View attachment 3043663
LOG..........
[R&D Test Tools Log File]
06:31:23 : Launching SW update
06:31:23 : Unpacking KDZ
06:32:15 : KDZ file extraced
06:32:44 : Files were extracted.
06:32:44 : LGMobileDL Load.
06:32:44 : Port = -1
06:32:44 : Connecting to phone
06:32:59 : Check Phone mode = 2
06:32:59 : Phone type check.......
06:33:00 : LGMobileDL.DLL Loading....
06:33:01 : _SetAuthMark Fail
06:33:01 : _SetAuthMark Ok : wAuthMark(65535)
06:33:02 : _DetachDLL Call
06:33:07 : _DetachDLL Call End
06:33:07 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\MS65910c_Develop.wdb
06:33:07 : Param : moduleDir =
06:33:07 : Param : waitTime = 0
06:33:07 : Param : UsbHighSpeed = 1
06:33:07 : Param : PhoneMode = 2
06:33:07 : Param : BinVersion = MS65910c_00
06:33:07 : Param : AuthMark = 65535
06:33:07 : Call fn_StartUpgrade
06:34:16 : 3GQCT : wParam = 100, lParam = 0
06:34:16 : Step : Upgrade Error error code = 0
06:34:16 : ResetStartInfo() Call
06:34:16 : _DetachDLL Call
06:34:22 : _DetachDLL Call End
06:34:22 : FreeLibrary Call
06:34:22 : FreeLibrary Call End
06:34:22 : ResetStartInfo() Call End
06:34:22 : 3GQCT : wParam = 100, lParam = 64
06:34:22 : Step : Upgrade Error error code = 64
06:34:22 : ResetStartInfo() Call
06:34:22 : ResetStartInfo() Call End
06:34:22 : ===FINISHED===

No one knows what has gone wrong? please help if anybody know something about this error. :crying::crying: