Hi guys
There are numerous things wrong with my phone, but i'll just go though the series of events:
[ Video of attempted boot Search LG GT540 Bootlooping on ytube, first video ]
1: Tried to install a rom that requires bigger partition size [Enigma rom, mikegapinksi's ICS rom etc]
2: found out how to change partition size [Mur4ik's tool] does so.
3: Engima rom fails to install from clockwork mod, tries fastboot but gets the infamous Too Many Links error, still able to write the boot image and recovery image though...
4: Tries to boot device, White LG Logo normally appears, swiftdroid logo briefly appears and then the normal LG flashy bootanimation, but after that, nothing.
5: Trying to write a system image to the phone using the Fastboot commandline reports "flash_write_image: image undersized (128 < 2112) on the device itself, and remote write failure on the PC
KDZ seems to throw various errors, WParam: 100 and Lpara,:1002 etc., sees the device in "scan for phone" though
Fastboot mode and Recovery still work, but booting normally throws normal LG Logo, then swiftdroid briefly, then Flashy LG bootanimation but NO FURTHER
Any help [Reccomended ROMs, procedures etc.] would be VERY much appreciated thanks ^^
Trust me ur phone is not bricked!
Although it is a bit stuffed up, If u can flash fastboot
again using KDZ and everything will be solved!
Just to clarify, do you want to reflash a fastboot image on to my phone?
if so, how would I do that?
Yes just flash fastboot again using KDZ.
Its not an img its a rom..
I can't use bootloop nor download anymore after leaving the battery out, And Hard reset does nothing in either modes. ClockworkMod still boots fine and i've had KDZ pick up the phone form that before...
DAMN!
Upgrade Error
Wparam: 100
LParam: 1002
Log as Follows:
[R&D Test Tools Log File]
17:32:00 : Launching SW update
17:32:00 : Unpacking KDZ
17:32:05 : KDZ file extraced
17:32:09 : Files were extracted.
17:32:09 : LGMobileDL Load.
17:32:09 : Port = -1
17:32:09 : Connecting to phone
17:32:19 : Check Phone mode = 1
17:32:38 : Phone type check.......
17:32:38 : LGMobileDL.DLL Loading....
17:32:38 : _SetAuthMark Ok : wAuthMark(5856)
17:32:38 : _DetachDLL Call
17:32:38 : _DetachDLL Call End
17:32:38 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP500AT-00-V10e-IND-XX-MAR-28-2011+0-DZ.dz
17:32:38 : Param : moduleDir =
17:32:38 : Param : waitTime = 0
17:32:38 : Param : UsbHighSpeed = 1
17:32:38 : Param : PhoneMode = 1
17:32:38 : Param : BinVersion = V10E_00
17:32:38 : Param : AuthMark = 5856
17:32:38 : Call fn_StartUpgrade
17:33:02 : 3GQCT : wParam = 4, lParam = 0
17:33:02 : Step Complete : DLOAD Change
17:33:42 : 3GQCT : wParam = 100, lParam = 1002
17:33:42 : Step : Upgrade Error error code = 1002
17:33:42 : ResetStartInfo() Call
17:33:42 : _DetachDLL Call
17:33:42 : _DetachDLL Call End
17:33:42 : FreeLibrary Call
17:33:42 : FreeLibrary Call End
17:33:42 : ResetStartInfo() Call End
17:33:42 : ===FINISHED===
This is what i meant by KDZ being an A******
I think it died, the power button does ABSOLUTELY nothing, and KDZ doesn't recognize it when I plug it in any more
if u think u've briked ur phone,try this
if u think u've briked ur phone,try this
it may work !!
http://forum.xda-developers.com/showpost.php?p=13205397&postcount=26
or
http://mygt540.com/tuts/faq-my-phone-is-bricked-guide/
my phone cant flash
[R&D Test Tools Log File]
22:18:52 : Launching SW update
22:18:52 : Unpacking KDZ
22:19:01 : KDZ file extraced
22:19:16 : Files were extracted.
22:19:16 : LGMobileDL Load.
22:19:16 : Port = -1
22:19:16 : Connecting to phone
22:19:36 : Check Phone mode = 1
22:19:36 : Phone type check.......
22:19:36 : _DetachDLL Call
22:19:36 : _DetachDLL Call End
22:19:36 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\v20b.dz
22:19:36 : Param : moduleDir =
22:19:36 : Param : waitTime = 0
22:19:36 : Param : UsbHighSpeed = 1
22:19:36 : Param : PhoneMode = 1
22:19:36 : Param : BinVersion = out
22:19:36 : Param : AuthMark = 0
22:19:36 : Call fn_StartUpgrade
:crying:
Related
Hello everyone. I just wanted to install SDSL3 for my Swift. I get into fastboot flashed MBN file for 170mb system partition and when i was flashing system i get "TOO MANY LINKS" error.
After that i was trying to do that again but fastboot said <WAITING FOR DEVICE>.
Now I'm trying to flash my Swift with KDZ (English Version)
All the time i get this:
Code:
[R&D Test Tools Log File]
19:35:58 : Launching SW update
19:35:58 : Unpacking KDZ
19:36:03 : KDZ file extraced
19:36:04 : Files were extracted.
19:36:04 : LGMobileDL Load.
19:36:04 : Port = -1
19:36:04 : Connecting to phone
19:36:19 : Check Phone mode = 1
19:36:37 : Phone type check.......
19:37:00 : _DetachDLL Call
19:37:00 : _DetachDLL Call End
19:37:00 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\poland.dz
19:37:00 : Param : moduleDir =
19:37:00 : Param : waitTime = 0
19:37:00 : Param : UsbHighSpeed = 1
19:37:00 : Param : PhoneMode = 1
19:37:00 : Param : BinVersion = openpl (1)
19:37:00 : Param : AuthMark = 0
19:37:00 : Call fn_StartUpgrade
19:37:08 : CDMA: wParam = 3, lParam = 0
19:37:08 : Step : C Drive Erase
19:37:53 : CDMA: wParam = 205, lParam = 0
19:37:53 : Model Dll Msg Not Found(205, 0)
Please HELP ME! :C
I suppose it is drivers problem. Reinstall and try again
Sent from my GT540 using Tapatalk
It doesn't help
Hows behave your phone, are you able to get into recovery or fastboot, or it normally starts
Sent from my GT540 using Tapatalk
Hello, i failed to flash v10k_00, rooted, unlocked bootloader and CWM ror throght KDZ.
It shows:
18:46:47 : Launching SW update
18:46:47 : Unpacking KDZ
18:48:34 : KDZ file extraced
18:49:57 : Files were extracted.
18:49:57 : LGMobileDL Load.
18:49:57 : Port = -1
18:49:57 : Connecting to phone
18:50:06 : Check Phone mode = 2
18:50:23 : Phone type check.......
18:50:29 : _DetachDLL Call
18:50:29 : _DetachDLL Call End
18:50:29 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LGP700AT-ROOT-CWM-NewBoot-00-V10k-EUR-XX-FEB-22-2013+0.dz
18:50:29 : Param : moduleDir =
18:50:29 : Param : waitTime = 0
18:50:29 : Param : UsbHighSpeed = 1
18:50:29 : Param : PhoneMode = 2
18:50:29 : Param : BinVersion = V10K_00
18:50:29 : Param : AuthMark = 0
18:50:29 : Call fn_StartUpgrade
18:50:30 : CDMA: wParam = 206, lParam = 0
18:50:30 : Model Dll Msg Not Found(206, 0)
What should i do to flash this success ?
Sorry for bad english.
faters said:
18:50:30 : Model Dll Msg Not Found(206, 0)
Click to expand...
Click to collapse
Those errors are normal, let it finish, it will reboot the phone automatically.
Ok, ill try one more time
same problem and i wait about 10-15min and nothing happen with my phone
UNOSlv said:
same problem and i wait about 10-15min and nothing happen with my phone
Click to expand...
Click to collapse
What phone do you have? I have a L3.Did you try flashing without the battery in your phone. Also what mode are you using diag or emergency
FlowUK said:
What phone do you have? I have a L3.Did you try flashing without the battery in your phone. Also what mode are you using diag or emergency
Click to expand...
Click to collapse
I have L7 , i am using emergency mode and i try one time flash without battery
Hello!
I've spent too many hours trying to figure this out, now I'm becoming hopeless! :crying:
No matter what settings I try on the KDZ update, I always end up on this error:
Code:
10:04:34 : Launching SW update
10:04:34 : Unpacking KDZ
10:04:55 : KDZ file extraced
10:05:30 : Files were extracted.
10:05:30 : LGMobileDL Load.
10:05:30 : Port = -1
10:05:30 : Connecting to phone
10:05:44 : Check Phone mode = 1
10:06:06 : Phone type check.......
10:06:34 : BinPath is a empty!!
10:06:34 : _DetachDLL Call
10:06:39 : _DetachDLL Call End
10:06:39 : Param : Path =
10:06:39 : Param : moduleDir =
10:06:39 : Param : waitTime = 0
10:06:39 : Param : UsbHighSpeed = 1
10:06:39 : Param : PhoneMode = 1
10:06:39 : Param : BinVersion = V10D_00
10:06:39 : Param : AuthMark = 0
10:06:39 : Call fn_StartUpgrade
10:07:11 : CDMA: wParam = 100, lParam = 0
10:07:11 : Step : Upgrade Error2 - Error Code : 0
10:07:11 : ResetStartInfo() Call
10:07:11 : _DetachDLL Call
10:07:16 : _DetachDLL Call End
10:07:16 : FreeLibrary Call
10:07:16 : FreeLibrary Call End
10:07:16 : ResetStartInfo() Call End
10:07:16 : ===FINISHED===
10:07:19 : OnModelDllMsg(OnMsgFromModelDll-CDMA) delete m_pLGCyonUpdate
It is interesting that it says "CDMA: wParam = 100, lParam = 0", although for other people it says "3GQCT: wParam = 100, lParam = 0", even though I set it to 3GQCT, my error includes the word CDMA instead.
Also, I'd like you to tell me if that's right: "Check Phone mode = 1", shouldn't it be "2"? I turn off the phone and connect it to the PC with the "- volume" pressed down. Then a black screen appears with the words "Download Mode".
Thank you!
And BTW, if I run it as administrator, it won't even decrypt the KDZ:
Code:
13:26:08 : Launching SW update
13:26:08 : Unpacking KDZ
13:26:21 : kdz decrypt error.
13:26:21 : Extract file error
13:26:23 : ===FINISHED===
Have you install Install MSXML 4.0 SP3 Parser (msxml.msi) or you can see here http://forum.xda-developers.com/showthread.php?t=1060121
george brown said:
Have you install Install MSXML 4.0 SP3 Parser (msxml.msi) or you can see here http://forum.xda-developers.com/showthread.php?t=1060121
Click to expand...
Click to collapse
Ah, yes, I have tried everything from a lot of tutorials.
teresaejunior said:
Ah, yes, I have tried everything from a lot of tutorials.
Click to expand...
Click to collapse
Try another rom which is compatible with your phone. Download KDZ updater from another source. You might also try flashing KDZ from another computer.
hi i want to upgrade my phone via KDZ, and after that i got error wParam = 100, lParam = 1010, and updater not responding and i can only close that, after that my phone goes emergency mode, pls help
[R&D Test Tools Log File]
10:32:23 : Launching SW update
10:32:23 : Unpacking KDZ
10:32:31 : KDZ file extraced
10:32:41 : Files were extracted.
10:32:41 : LGMobileDL Load.
10:32:41 : Port = -1
10:32:41 : Connecting to phone
10:32:50 : Check Phone mode = 1
10:33:07 : Phone type check.......
10:33:12 : LGMobileDL.DLL Loading....
10:33:12 : _SetAuthMark Fail
10:33:12 : AuthMark°Ў Б¤И®Ич PhoneїЎ Write µЗБц ѕКѕТЅАґПґЩ!
10:33:12 : _SetAuthMark Fail
10:33:12 : LoadCDMAPhoneData() Error
10:33:12 : _DetachDLL Call
10:33:12 : _DetachDLL Call End
10:33:12 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-00-V20d-EUR-XX-MAY-02-2013+0.dz
10:33:12 : Param : moduleDir =
10:33:12 : Param : waitTime = 0
10:33:12 : Param : UsbHighSpeed = 1
10:33:12 : Param : PhoneMode = 1
10:33:12 : Param : BinVersion = V20D_00
10:33:12 : Param : AuthMark = 0
10:33:12 : Call fn_StartUpgrade
10:33:12 : Smart : wParam = 206, lParam = 0
i disabled LG modem, enabled windows enableer
vuvkar said:
hi i want to upgrade my phone via KDZ, and after that i got error wParam = 100, lParam = 1010, and updater not responding and i can only close that, after that my phone goes emergency mode, pls help
[R&D Test Tools Log File]
10:32:23 : Launching SW update
10:32:23 : Unpacking KDZ
10:32:31 : KDZ file extraced
10:32:41 : Files were extracted.
10:32:41 : LGMobileDL Load.
10:32:41 : Port = -1
10:32:41 : Connecting to phone
10:32:50 : Check Phone mode = 1
10:33:07 : Phone type check.......
10:33:12 : LGMobileDL.DLL Loading....
10:33:12 : _SetAuthMark Fail
10:33:12 : AuthMark°Ў Б¤И®Ич PhoneїЎ Write µЗБц ѕКѕТЅАґПґЩ!
10:33:12 : _SetAuthMark Fail
10:33:12 : LoadCDMAPhoneData() Error
10:33:12 : _DetachDLL Call
10:33:12 : _DetachDLL Call End
10:33:12 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP700AT-00-V20d-EUR-XX-MAY-02-2013+0.dz
10:33:12 : Param : moduleDir =
10:33:12 : Param : waitTime = 0
10:33:12 : Param : UsbHighSpeed = 1
10:33:12 : Param : PhoneMode = 1
10:33:12 : Param : BinVersion = V20D_00
10:33:12 : Param : AuthMark = 0
10:33:12 : Call fn_StartUpgrade
10:33:12 : Smart : wParam = 206, lParam = 0
i disabled LG modem, enabled windows enableer
Click to expand...
Click to collapse
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
Enjoy your NEW OLD phone
P705
I have a P705 and I tried upgading it via LG Mobile SupportTool and it was stuck at 4% then it had an error and afterwards my phone was stuck at Emergency Mode. I tried various ways and even the KDZ Software Update but it kept giving errors when i tried to flash any kind of ROM.
04:41:30 : Connecting to phone
04:41:44 : Check Phone mode = 2
04:41:44 : Phone type check.......
04:41:45 : LGMobileDL.DLL Loading....
04:41:45 : _SetAuthMark Fail
04:41:46 : _SetAuthMark Ok : wAuthMark(65535)
04:41:46 : _DetachDLL Call
04:41:46 : _DetachDLL Call End
04:41:46 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP705AT-00-V20b-ESA-XX-MAY-03-2013+0.dz
04:41:46 : Param : moduleDir =
04:41:46 : Param : waitTime = 0
04:41:46 : Param : UsbHighSpeed = 1
04:41:46 : Param : PhoneMode = 2
04:41:46 : Param : BinVersion = V20B_00
04:41:46 : Param : AuthMark = 65535
04:41:46 : Call fn_StartUpgrade
04:41:46 : 3GQCT : wParam = 206, lParam = 0
Then it gives Error wParam=100 lParam=500
amcntabanao said:
P705
I have a P705 and I tried upgading it via LG Mobile SupportTool and it was stuck at 4% then it had an error and afterwards my phone was stuck at Emergency Mode. I tried various ways and even the KDZ Software Update but it kept giving errors when i tried to flash any kind of ROM.
04:41:30 : Connecting to phone
04:41:44 : Check Phone mode = 2
04:41:44 : Phone type check.......
04:41:45 : LGMobileDL.DLL Loading....
04:41:45 : _SetAuthMark Fail
04:41:46 : _SetAuthMark Ok : wAuthMark(65535)
04:41:46 : _DetachDLL Call
04:41:46 : _DetachDLL Call End
04:41:46 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP705AT-00-V20b-ESA-XX-MAY-03-2013+0.dz
04:41:46 : Param : moduleDir =
04:41:46 : Param : waitTime = 0
04:41:46 : Param : UsbHighSpeed = 1
04:41:46 : Param : PhoneMode = 2
04:41:46 : Param : BinVersion = V20B_00
04:41:46 : Param : AuthMark = 65535
04:41:46 : Call fn_StartUpgrade
04:41:46 : 3GQCT : wParam = 206, lParam = 0
Then it gives Error wParam=100 lParam=500
Click to expand...
Click to collapse
need more info, is your pc on windows or linux? Did you install the original and correct drivers for your device, did you install kdz correctly.
if on windows did you turn og lg mobile modem. under modems and reboot your pc. Did you run windows enabler on your pc if on windows.
Did you set kdz to emergency.
Did you download the correct frameware for your device.
did you remove your battery before conecting your device?
Sent from my LG-E610 using XDA Free mobile app