Dear all
I have to connect my nexus player to a 802.1x MSCHAPv2 wifi network
while I can easily do it with my nexus 5 where I can enter identity (username) and password, in the nexus player I can only insert a password
how to connect with an identity and a password?
thanks
Anyone? Can this be accomplished by installing a specific rom? Or is the player itself hardware incompatible?
Related
Hi All,
I have a JarJar WM 5 phone and I can't seem to get PEAP working on the phone with my work network.. My laptop is configured with PEAP and MSCHAPv2 authentication. The client in WM5 allowed you to select PEAP but if click on _Properties_ in the configuration it complains that the network requires a personal certificate to positively identify me although that is not the case with the laptop or any other wireless pc in the building. If I just leave it on PEAP I get a login and password prompt when it connects to the access point. I enter the correct username and password and it attemps to connect for a few minutes and fails. Anyone have it sucessfully working on this type of network?
Thanks!
Eric
Hey Guys,
I have a 8125 from Cingular and when, when i try to log in to my work wireless network, after typying in my username, password and domain, it gets connected and as soon as it does message pops out saying: "cannot log on to the wirells network. This network requires a personal certificate to positively identify you."
so pretty much i can't get connected, what should i do to resolve that?
Here are the network card settings for my work access:
Authentication: WPA
Data Encription: TKIP
802.1x
EAP type: PEAP
thanks
I have the exact same problem as you. I haven't been able to figure it out either. I believe my connection is LEAP though, not PEAP.
ive just set up my home network. I got everything working on the setup, main puter, 3 laptops, XDA mini s and XDA2i. I then added wpa psk with tkip. The laptops and the main puter all work fine but both the XDA's with the password entered just sit there either saying connecting or netwok available. They will not connect. Very very frustrating.
Pete
For some reason using PEAP on a Windows Mobile device requires you to have a Client Certificate installed on the device as well as the server certificate. Luckily the Wizard has a certificate enrollment utility built in (Settings, Connections, Wireless LAN). Make sure the certificate template 'ClientAuth' is enabled on the CA Server.
Obviously you need to enroll whilst the Wizard is connected to your PC and on the network.....
HTH
Andy
I've been struggling with this for a week now. Looking at my laptop as a guide, I've got the connection on my phone set up as follows:
Authentication: Open
Data Encryption: WEP
Key is automatically provided: yes
Uses IEEE 802.1x network access control: yes
EAP type: PEAP
I was given a certificate by the IT guys and it installs fine on my phone under root certificates.
When I attempt to connect to the network, it keeps coming back with an error saying the I need to have a personal certificate to positively identify me. Hmmm...
I do have a certificate! Is there a difference between the root and personal certificates? Do I need a personal certificate for some reason or should the root certificate that I was given suffice?
Any suggestions? This is driving me crazy!
Thanks!
Same here...
I am having the same exact problem!
Me too! Except with WPA2 AES (and WPA TKIP, our AP supports both).
Did you try disabling proxy ?
I have that problem too at my work. The problem is that you will need a username and certificate so that the server will accept you as a user. Now you can only connect but you can't do anything without the username, u see
get saved password
faziL achu said:
get saved password
Click to expand...
Click to collapse
your wifi password will be displayed either on your router or in your router settings
If the password is saved then you will be already connected to the wifi therefore you can access your router settings by opening up a web browser and typing in the default gateway for your router for example it could be 192.168.1.1 or 192.168.1.254 - If you don't know what it is then a simple google search of your router model number will tell you
If it asks you for a password it maybe admin or username admin and password admin - However it maybe different and again a google search will tell you what the default password is for your router - If you have changed it then a reset of your router by normally pressing the reset button will set everything back to default
From the router settings page you can access the wifi section where it will tell you what the current wifi password is
Note you can also do this if you hard wire a pc to your router via Ethernet cable if you don't have wifi access
Hi guy, i have a problem with my mac address.
When i change my mac address, for example in: 00:11:22:33:44:55, the phone doesn't connect in wifi with the key WPA/WPA2.
But the phone succeed connects in wifi with the key WEP and without password, Why?
What can i resolve it in wifi with the WPA?