Hi, I just got my nexus player in the mail and I was eager to try it out but when I turn it on it shows the google logo for 5 seconds and then I get no picture or sound. I tried on another TV and a computer monitor and those worked! I set it up and upgraded it to 5.1, tried the TV again but to no avail.
How can I fix this?
The TV In question is a Hisense hsl4229hdip.
Thanks, Marshall.
Related
It blocks the receiving of normal TV channels (via DVB-C), my Samsung TV is saying there is no signal coming in. As soon as I disconnect the player (remove HDMI or remove power from Nexus Player) my TV is instantly back to normal. As soon as i make the Nexus Player work again (with normal TV selected as a source) the error is comming back. I can repeat this as many times I want, the picture comes and disapears.
Android TV on Nexus Player is up to date, the software on the Samsung TV (UE40H6470) as well. I tested it on all the hdmi sockets on the TV.
With other HDMI Devices I connect to the TV this problem never appeared.
Any ideas how this could be solved? What could be the reason?
CortoMaltese87 said:
It blocks the receiving of normal TV channels (via DVB-C), my Samsung TV is saying there is no signal coming in. As soon as I disconnect the player (remove HDMI or remove power from Nexus Player) my TV is instantly back to normal. As soon as i make the Nexus Player work again (with normal TV selected as a source) the error is comming back. I can repeat this as many times I want, the picture comes and disapears.
Android TV on Nexus Player is up to date, the software on the Samsung TV (UE40H6470) as well. I tested it on all the hdmi sockets on the TV.
With other HDMI Devices I connect to the TV this problem never appeared.
Any ideas how this could be solved? What could be the reason?
Click to expand...
Click to collapse
1. I'm thinking a bad hdmi cable, so swap it if you can.
2. Hook the Nexus Player to another TV and see what happens.
3. Maybe a goofy setting in the TV, do a factory reset on the TV and see if that helps.
4. much less likely a power problem, but try a different outlet or different surge protector.
I'm using a NP 5.1.1 connected with a not recent Sony TV: KDL-40P550.
Time to time the screen goes black and return back in a few seconds.
During black screen the audio stream continues without any interruption.
The TV doesn't show any messages that could make me think about a connection loss: no messages on the display and, as told before, the audio stream continues.
The same TV with the same cable in the same hdmi port got correct signal from Chromecast, a PC with nVidia card, a MacMini 2010.
Any suggestion?
Anyone with same experience?
dariofinardi said:
I'm using a NP 5.1.1 connected with a not recent Sony TV: KDL-40P550.
Time to time the screen goes black and return back in a few seconds.
During black screen the audio stream continues without any interruption.
The TV doesn't show any messages that could make me think about a connection loss: no messages on the display and, as told before, the audio stream continues.
The same TV with the same cable in the same hdmi port got correct signal from Chromecast, a PC with nVidia card, a MacMini 2010.
Any suggestion?
Anyone with same experience?
Click to expand...
Click to collapse
I'm having the same issue now, we're you able to solve this?
Hi,
My NP runs under the original ROM, (6.0.1).
It works well when I cast Youtube or a video thru the cast option.
The screen mirroring only cast audio, the screen remains black.
I use a nexus 5 under CM13 to send the cast. It was working well with my previous TV that was supporting mirroring (a smart sony).
I have tried to connect the NP to my Nexus 5 access point. The problem is the same.
I really don't know in witch way I need to search...
Any ideas ?
Thanks
I've found the solution here : http://forums.androidcentral.com/google-nexus-player/595252-nexus-player-casting-broken-6-0-a.html
Just need to uninstall updates of Google Cast Receiver and update it again !
Running Android 8.0.
Solution : Delete cache of "Chromecast built-in" app.
I am no longer getting video as of today on my Nexus Player, on my Panasonic TV. Audio works fine still, and the Google logo shows up, so HDMI isn't dead.
Just finished doing a format and flash to the latest Marshmallow version out for Fugu, and the issue persists.
Any idea what's going on with this thing?
Thanks!
Solved! Had to do a hardware reset of my Yamaha AV Receiver - seems to be a known rare issue with my model.
Instructions how to do this on the Yamaha RX-V377: http://faq.yamaha.com/us/en/article/audio-visual/av-receivers-amps/rx/rx-v377_black_u/10790/8325
Crazy. I run full android M on nexus and it worked fine on my Samsung TV. But I took it to work and the sharp TV in the break room would say "received unsupported video output" and go blank after the google logo. My Panasonic TV will display but everything gets very distorted and artifacted. I also have a Yamaha receiver however I am using an HDMI port directly into the TV. I also noticed the Samsung TV in the office at work. Had mo issues either..
I can't get my LG V20 to connect to any of my Miracast enabled devices. I have a LG WebOS TV and a LG PH150G Projector and can't get either one to connect. On the Projector, the phone will find it just fine, but when it connects the projector will get stick at Signal Detection. On the LG WebOS TV it will just get stuck on connecting. Any solutions?
SOLVED for me at least! It is a conflict with the App 'AllCast' by clockworkMod. Once I uninstalled the app Miracast works!
I had the same problem trying to get the V20 to connect to a Microsoft Wireless Display Adapter. Suggestions would be appreciated!
That's odd. I have a 4k tv with chromecast integrated and also have an ezcast 4k dongle and both of them allow me to use DLNA and also screen mirroring. Currently using Weta Rom.
onree said:
I had the same problem trying to get the V20 to connect to a Microsoft Wireless Display Adapter. Suggestions would be appreciated!
Click to expand...
Click to collapse
I think I can solve this one for u. Go into wifi settings and forget your home network(s). Restart phone. Now try to connect to dongle by selecting screen sharing from settings. Let me know. It always works for me
recDNA said:
I think I can solve this one for u. Go into wifi settings and forget your home network(s). Restart phone. Now try to connect to dongle by selecting screen sharing from settings. Let me know. It always works for me
Click to expand...
Click to collapse
Tried your suggestions, but they didn't work. I am using the Tmobile variant of this device with the Dec. patch update.
docangle said:
Tried your suggestions, but they didn't work. I am using the Tmobile variant of this device with the Dec. patch update.
Click to expand...
Click to collapse
I had trouble with miracast too a few months back. Gave up and just used smart share to watch my movies on my phone. I could look into it again and see if I can figure it out.
Edit.. Just hooked up fine first try. Mines not a webos but it is an lg 3d smart tv.
Swizzle82 said:
I had trouble with miracast too a few months back. Gave up and just used smart share to watch my movies on my phone. I could look into it again and see if I can figure it out.
Edit.. Just hooked up fine first try. Mines not a webos but it is an lg 3d smart tv.
Click to expand...
Click to collapse
What version of the phone do you have (Carrier)? I have tried to connect to 4 different TV's and Miracast devices without success.
I just tried using Miracast in 'Safe Mode' and it almost works, The status bar changes to blue, and my projector now gets to starting stream, but eventually disconnects.
SOLVED! It is a conflict with the App 'AllCast' by clockworkMod. Once I uninstalled the app Miracast works!
docangle said:
What version of the phone do you have (Carrier)? I have tried to connect to 4 different TV's and Miracast devices without success.
I just tried using Miracast in 'Safe Mode' and it almost works, The status bar changes to blue, and my projector now gets to starting stream, but eventually disconnects.
Click to expand...
Click to collapse
T-Mobile. I'm on a custom rom but don't thik that is the issue. Have you factory reset your phone yet? I know no one likes doing that, but might solve your issue. It's definitely the phone though and not your other devices. I know the first time I connect it makes me enter in a code from the tv, but after that it remembers the connection. Try going into your tv menu and see if you can connect from the tv to phone side as opposed to phone to tv.. Should have a menu option for it on all your lg devices that are miracast equipped.
Ok never mind saw you fixed it.