PHP:
I am not responsible from any brick or damage to your device. Make a Back-Up First. It will delete ALL of your data (music, video, photo etc.)
1-Download LG Flash Tool 2014
http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip
2-Download LG United Driver
http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425
3-Download LG Mobile Support Tool
http://tool.xcdn.gdms.lge.com/client/app/B2CAppSetup.exe
4-Download KDZ File
http://pkg02.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=FW26K91032AMA1JBC1F42ZP/V50030a_00.kdz
+ WARNING : Remember copy KDZ file into LG Flash Tool 2014 folder
+ If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library: https://googledrive.com/host/0B9l4QOCXUmxXV19jN1ZrTnBwdTQ/VC_RedistInstaller.exe
5-Turn off your device. Push Volume Up and Down buttons at the same time. Plug your device into your computer. It will enter Download Mode
Open LG Flash Tool 2014 and set like this, choose KDZ file> Click on Normal Flash> In the pop-up click on Start> In the next pop-up choose your preferred Language> Click OK> Procedure will began wait until it finishes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: If your device stuck in LG Logo Screen (Bootloop) HARD RESET
Turn off your device completely (Hold on to power button 10 sec)
1-Push power and Volume Down (First power, second Volume Down and do it quick)
2-When LG logo appears leave power button, hold Volume Up without releasing Volume Down Button and Hold Power Button at the same time. (Make it quick)
3-Proceed the Hard Reset
Don't forget to Back-Up FIRST
There is NO working Root method at the moment[
If you want to go back to JellyBean or Kitkat by using Flash Tool select CDMA mode. Thanks to @Die Bruine
Credits; Thanks to @quangnhut123 for LG Flash Tool 2014
Thanks to @sugaritos for letting us know about KDZ
Thanks to @ckret 'If you Select Type CDMA and select CSE Flash you don't have to perform HardReset'
Perfect - it all worked a treat! Many thanks!!!
However, in my haste, I didn't switch off the V500 and set it to "download mode" - but the flash updater does this for you. Also, there's no need to hard reset once flashed - just have patience and wait (and wait) for the tab to complete its background tasks while the static LG logo is displayed (with the occasional "light reflection" animation on the red sphere every now and again...) After a (long) while, the "optimising apps" box is displayed (changing all of the Dalvik runtimes to ART?) and finally gives you reassuring progress feedback as all of your installed apps are processed.
And eventually - voila, Android Lollipop 5.0.2 (English) on the LG G Pad 8.3 (V500) with all my original data and apps still intact!
Thanks again!
Great!!
This version have Brazilian Portuguese Language?
Thanks
Sent from my LG-V500 using XDA Free mobile app
T1G8 said:
Great!!
This version have Brazilian Portuguese Language?
Thanks
Sent from my LG-V500 using XDA Free mobile app
Click to expand...
Click to collapse
Yes my friend it does
Sent from my D802 Cloudy G2 2.2 & Dorimanx Kernel v10.1
iko11 said:
Yes my friend it does
Sent from my D802 Cloudy G2 2.2 & Dorimanx Kernel v10.1
Click to expand...
Click to collapse
Hello,
can you tell us all languages supported? For example I'm interested in italian.
Thanks in advance
FandangoL said:
Hello,
can you tell us all languages supported? For example I'm interested in italian.
Thanks in advance
Click to expand...
Click to collapse
All languages are there including Italian. Almost 50 languages
Sent from my D802 Cloudy G2 2.2 & Dorimanx Kernel v10.1
Wireless storage and plug and pop removed!
Im looking for a wireless storage app. Can someone help me?
Sorry for my bad english
Thanks for the tutorial! Gonna do this soon.
Also, how do I know where my pad came/manufactured from? I bought my pad "used" so I don't know where it was originally bought.
So I can know what would I download to go back to v20d Kitkat or Lollipop once it's released to what area my pad from.
mash hossein said:
Wireless storage and plug and pop removed!
Im looking for a wireless storage app. Can someone help me?
Sorry for my bad english
Click to expand...
Click to collapse
Use SambaDroid it's the Best !
Sent from my D802 Cloudy G2 2.2 & Dorimanx Kernel v10.1
gatgat23 said:
Thanks for the tutorial! Gonna do this soon.
Also, how do I know where my pad came/manufactured from? I bought my pad "used" so I don't know where it was originally bought.
So I can know what would I download to go back to v20d Kitkat or Lollipop once it's released to what area my pad from.
Click to expand...
Click to collapse
I don't have any idea about it :/
iko11 said:
I don't have any idea about it :/
Click to expand...
Click to collapse
Well, there's nothing to lose anyway after flashing KDZ. Since I have no warranty to worry about.
I was just making sure that I can somehow return to it's factory ROM.
Gonna flash this after I fully charge my pad and download.
WAU!!
@iko11
Thank you, it works beautifully!
I am glad to see you like this tutorial have fun
Sent from my D802 Cloudy G2 2.2 & Dorimanx Kernel v10.1
gatgat23 said:
Well, there's nothing to lose anyway after flashing KDZ. Since I have no warranty to worry about. [emoji14]
I was just making sure that I can somehow return to it's factory ROM.
Gonna flash this after I fully charge my pad and download.
Click to expand...
Click to collapse
I am sure that you are gonna like it
Sent from my D802 Cloudy G2 2.2 & Dorimanx Kernel v10.1
Rly thank u soo much bro, but root important for me any working method?
Adamsin
faithhh said:
Rly thank u soo much bro, but root important for me any working method?
Adamsin
Click to expand...
Click to collapse
Any working method yet. There are some developers working on a succesful method.
Sagolun hocam
Sent from my D802 Cloudy G2 2.2 & Dorimanx Kernel v10.1
The Brazilian G Pad 8.3 community in G+ has been flashing without hiccups. And they came to the conclusion.... A V500 is a V500. Double check your model. If it is V500, flash without fear. Works flawlessly.
BUT, if you are rooted, only CSE Flash and/or hard reset before/after flash will do the trick, which means you lose all your data, so backup first.
Personally, I will skip update 'till a method to upgrade and/or root which doesn't wipe my data is out, I'm not in the mood of backup/restore my stuff - past experiences have not been good and some data were lost forever.
Tnx for the KDZ, but i come in to problem.
I flashed the KDZ, it goes very smoth til the end, but when pad must start up it comes to boot loop where says securty error (Autentication Fail #9)
I doit the factory reset , again flash KDZ but every time ended on this securty error. Can enybody help me?
Woked for me as advised . only prob was when one screen said could not connect to server at start.
json30 said:
Woked for me as advised . only prob was when one screen said could not connect to server at start.
Click to expand...
Click to collapse
Could you explain a little bit clear ?
Sent from my D802 Cloudy G2 2.2 & Dorimanx Kernel v10.1
Related
Hi all,
http://forum.xda-developers.com/showthread.php?t=2722008&page=3
when use csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW774595432109876543213/D80220B_00.kdz flah and go back to another firmware it lost knock on function.anybody can help ?
iall5tar said:
DIdnt fix it.
i try the following steps just to try to fix it but everything failed:
Flash another .kdz via PC.
Flash via CWM another ROM.
Do a restore nandroid.
Downgrading to JB.
Flashed another kernel (SImple v4, savoca, Dorimanx)
Flased baseband.
dunno what el se to do! xD
btw everything works good but i lost the feature Knock on.
Click to expand...
Click to collapse
I try to flash TOT file ,doedn't work too. :crying:
Solution
* 3845#*802# > setting > update touch firmware
Same here, i dont find any solution...
somboons said:
Hi all,
http://forum.xda-developers.com/showthread.php?t=2722008&page=3
when use csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW774595432109876543213/D80220B_00.kdz flah and go back to another firmware it lost knock on function.anybody can help ?
I try to flash TOT file ,doedn't work too. :crying:
Click to expand...
Click to collapse
I get the impression that LG are trying to use some sly little tricks since introducing the kitkat rom to make modding or flashing the device in non-recommended ways more awkward.
bobsie41 said:
I get the impression that LG are trying to use some sly little tricks since introducing the kitkat rom to make modding or flashing the device in non-recommended ways more awkward.
Click to expand...
Click to collapse
however, kdz flashing is the "correct" LG way...
somboons said:
Hi all,
http://forum.xda-developers.com/showthread.php?t=2722008&page=3
when use csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW774595432109876543213/D80220B_00.kdz flah and go back to another firmware it lost knock on function.anybody can help ?
I try to flash TOT file ,doedn't work too. :crying:
Click to expand...
Click to collapse
Do you test dori kitkat kernel ?
http://www.dorimanx.com/LG/beta-test/
LenAsh said:
however, kdz flashing is the "correct" LG way...
Click to expand...
Click to collapse
Not for flashing firmware/software intended for a different d802 iteration. ie/ Vodafone on unbranded etc.
somboons said:
Hi all,
http://forum.xda-developers.com/showthread.php?t=2722008&page=3
when use csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW774595432109876543213/D80220B_00.kdz flah and go back to another firmware it lost knock on function.anybody can help ?
I try to flash TOT file ,doedn't work too. :crying:
Click to expand...
Click to collapse
But Knock code works well mate?
Go to the service menu (3845#*80x#) and look for "Update Touch Firmware", it will fix it the issue.
somboons said:
Hi all,
http://forum.xda-developers.com/showthread.php?t=2722008&page=3
when use csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW774595432109876543213/D80220B_00.kdz flah and go back to another firmware it lost knock on function.anybody can help ?
I try to flash TOT file ,doedn't work too. :crying:
Click to expand...
Click to collapse
Oke
Solution
* 3845#*802# > setting > update touch firmware
* The device will freeze ( Wait until the process )
Re Test
kennguy said:
But Knock code works well mate?
Click to expand...
Click to collapse
work on 20b but when go to other fw knock on lost
pendroz said:
Oke
Solution
* 3845#*802# > setting > update touch firmware
* The device will freeze ( Wait until the process )
Re Test
Click to expand...
Click to collapse
very thank
somboons said:
work on 20b but when go to other fw knock on lost
Click to expand...
Click to collapse
I heard someone said that LG has changed something in new FW so knock on will lost even you downgrade or flash another FW.
kennguy said:
I heard someone said that LG has changed something in new FW so knock on will lost even you downgrade or flash another FW.
Click to expand...
Click to collapse
Solution
* 3845#*802# > setting > update touch firmware
work very well
somboons said:
Solution
* 3845#*802# > setting > update touch firmware
work very well
Click to expand...
Click to collapse
A 1,000 thanks!, I updated to the most recent Kit Kat from Rogers on my D803 and Knock On was not working when I downgraded to an older release. Dialing 3845#*803# solved the problem .
Hid3rs said:
Go to the service menu (3845#*80x#) and look for "Update Touch Firmware", it will fix it the issue.
Click to expand...
Click to collapse
Hi, when I use knock code, can I use knock on too mate?
kennguy said:
Hi, when I use knock code, can I use knock on too mate?
Click to expand...
Click to collapse
Had you run the wizard for the Knock Code, you would've noticed that you can not use Knock On when Knock Code is enabled.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have also lost knock on/code but as you suggested I made this toch firmware update and after that knock on works but... all the time, even if I'm using knock code.. I tried wipe and differnet kernel's but nothing seems to help..
after the kit kat update my tmobile d801 unlocked isnt able to connec to telus network anymore, it just says no network. I have tried a rogers sim card in it and it works fine, I dont understand what could have changed, phone is still unlocked, my sim works in my other phones. I tried downgrading back to jellybean, even tried a custom rom, nothing worked.
Hi,
I have knock code working on both CloudyG3 and CloudyFlex, but Knock On is lost in VS980 stock 24A firmware.
My G2 variant is Verizon VS980, no hidden menu can be brought up by dialing "*3845#*980*", how can I fix my issue?
Thanks.
zeroxia said:
Hi,
I have knock code working on both CloudyG3 and CloudyFlex, but Knock On is lost in VS980 stock 24A firmware.
My G2 variant is Verizon VS980, no hidden menu can be brought up by dialing "*3845#*980*", how can I fix my issue?
Thanks.
Click to expand...
Click to collapse
its 3845#*980#
Here you find my new hosting space, where you'll find any Original Stuff needed to restore, for any variant...(wait if you still not find yours )
FOLLOW this guide and Steps http://forum.xda-developers.com/showthread.php?t=2475045 but using G3 files, sure
p.s. Disconnect usb cable only when you see TEST 3 image on G3 (it could be 4/5 minutes before you see it) - remove battery, and restart G3.
Flashtool (last Version)
Driver
if you rehost this job in other places (for viet guys) write real source
Donate a Beer if you want to support always updated repository FW
Awesome, hoping you find the UK images too!
Sent from my LG-D855 using Tapatalk
Lennyuk said:
Awesome, hoping you find the UK images too!
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW893006432109876543213/D85510A_00.kdz
This was taken from another thread which is the link to the factory UK images.
daleski75 said:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW893006432109876543213/D85510A_00.kdz
Click to expand...
Click to collapse
Thanks, but I have trouble with KDZ files on windows 8 - need the TOT.
I am sure they will turn up soon.
Lennyuk said:
Awesome, hoping you find the UK images too!
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Hello
Have u tried ? can you post a screen of the "TEST 3 image" pls
Anyone know why the d855 doesnt show the LTE bands in the service menu like the Korean variant?
Lostatsea23 said:
Anyone know why the d855 doesnt show the LTE bands in the service menu like the Korean variant?
Click to expand...
Click to collapse
What bands are you after?
The D855 will juts connect to any of the following - LTE 700 / 800 / 900 / 1800 / 2100 / 2300 / 2600, its not been built to allow you to switch between them.
May i ask if the tut posted is the same as this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-D855 using Tapatalk
i did it...
is normal to have apps from orange, like antivirus? and more... and other companys, and amazon.....
thx really nice
Can I follow this guide for using LG_Flash_Tool and UK 16GB .kdz to return my G3 to stock, or are there any settings that need changing for it to work?
http://forum.xda-developers.com/showthread.php?t=2432476
557953 said:
Can I follow this guide for using LG_Flash_Tool and UK 16GB .kdz to return my G3 to stock, or are there any settings that need changing for it to work?
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Im good got it sorted very easy just the .kdz & LG FT 2014
557953 said:
Im good got it sorted very easy just the .kdz & LG FT 2014
Click to expand...
Click to collapse
Did you use "LG FT 2014" from LG G2 thread, by quangnhut123 ?? And flashed your LG G3 ? Super ... :good:
Yes indeed
Dowloaded the .kdz file put G3 in DL mode, plugged into PC, used device manager to change port from whatever it was to 41, loaded the .kdz into LG Flash Tool 2014, used "CSE flash" left all other settings as they were and started it going..... took about 5mins and badabadabing brand new G3 again
557953 said:
Yes indeed
Dowloaded the .kdz file put G3 in DL mode, plugged into PC, used device manager to change port from whatever it was to 41, loaded the .kdz into LG Flash Tool 2014, used "CSE flash" left all other settings as they were and started it going..... took about 5mins and badabadabing brand new G3 again
Click to expand...
Click to collapse
Hiii, thats extreme GOOOOD News
Sent from my LG-D855 using XDA Premium 4 mobile app
Glad I could help you but yeah worked like a charm. Seems the dev on this phone is coming along steadily as the cwm style recovery from the Chinese forum worked fine on d855 also. Just wanting, twrp cyanogen/aosp and a oc kernel now
Hey guys,
I am new to LG devices.
Does this also work on branded devices (G3 16GB vodafone branding)?
Thanks in advance.
should do, you might loose Vodafone boot-screen or any Vodafone bloat.... neither of which are bad
as long as you have a D855 16GB UK G3 you should be fine
That's my goal
My G3 will be a DE version I think. Shipping mid July. Should be fine too?
tHoMaS-1 said:
That's my goal
My G3 will be a DE version I think. Shipping mid July. Should be fine too?
Click to expand...
Click to collapse
Sure just make sure you use the right firmware for you device, if its DE version i'm guessing will be 32GB Euro D855 FW
like me.
this is what i used to upgrade my D855 v10a to australia 10c.
since i'm going to update to v10e, was looking for this thread but found the two threads here in G3 might confuse those new to LG.
looking for something simple to follow, credits to OP of this thread:
http://forum.xda-developers.com/showthread.php?t=2797190
quangnhut123 said:
You can donate me a beer via paypal : [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Version:
+ Build 25/06/2014 : Initial Version
+ Build 27/06/2014 : Fix not working with windows XP
+ Build 03/07/2014 : Fix not working with some machine run windows 8/8.1 64bit
2. What's news:
+ This is a modified version of UpTestEX v1.2.3.1 and working with all LG Smartphone Models
+ Re-design GUI simpler.
+ Working without LG Mobile Support Tool installed !
+ Working with lastest version of LG Mobile Support Tool.
+ Dont need to use hosts file or run http server to bypass anymore !
+ Default language is set to English. Don't need to choose language any more !
3. Tutorial:
+ Download and setup LG Driver : http://www.mediafire.com/download/g...leDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe
+ Download LG Flash Tool 2014 tool and extract :
http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip
+ Enter to Download Mode and plug USB into your PC
+ WARNING : Remember copy KDZ file into LG Flash Tool 2014 folder
+ Run LGFlashTool2014.exe and do as following pictures :
+ If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library : https://googledrive.com/host/0B9l4QOCXUmxXV19jN1ZrTnBwdTQ/VC_RedistInstaller.exe[/SIZE]
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
No need to choose desired language, it automatically change to English as a default setting.
​+ Wait until 100% to complete !
Click to expand...
Click to collapse
how to enter download mode:
http://www.android.gs/enter-download-mode-lg-g2/
that is for LG G2 but also works for LG G3
radeonxt said:
how to enter download mode:
http://www.android.gs/enter-download-mode-lg-g2/
that is for LG G2 but also works for LG G3
Click to expand...
Click to collapse
I sent the original OP yesterday a message he should please post his thread also here. You were quicker. Good job.
I have an european phone model D855. Do I live mode on CDMA or choose something else?
Thanks!
J.
Joao Oliveira said:
I have an european phone model D855. Do I live mode on CDMA or choose something else?
Thanks!
J.
Click to expand...
Click to collapse
I left it always to CDMA and worked well with EUR firmware.
May i ask. What does this TOOL ?
saigon66 said:
May i ask. What does this TOOL ?
Click to expand...
Click to collapse
It is a flashtool, to flash KDZ files (New or other stock roms) , also when you have messing your phone up, and want to do a total cleanup .....
A must have tool.
Fauert said:
It is a flashtool, to flash KDZ files (New or other stock roms) , also when you have messing your phone up, and want to do a total cleanup .....
A must have tool.
Click to expand...
Click to collapse
It tells me that my phone is not connected
olafsand said:
It tells me that my phone is not connected
Click to expand...
Click to collapse
Have you installed G3 driver on PC? Go in download mode and try again ...
Sent from my LG-D855 using XDA Premium 4 mobile app
Fauert said:
Have you installed G3 driver on PC? Go in download mode and try again ...
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes i have. Now after pc restart it works. But it does`nt fix my screen rotation not working issue
Anything for us Mac users?
Moostafa29 said:
Anything for us Mac users?
Click to expand...
Click to collapse
http://windows.microsoft.com/en-gb/windows/buy
codified said:
http://windows.microsoft.com/en-gb/windows/buy
Click to expand...
Click to collapse
Lol, thx
Does it work with phones locked to a operator.
Can I flash any other ROM for unlocked phones?
I've flashed kdz files twice now but it strikes me that I'm relying on the files being the correct one. How can I tell if I have the 16gb or 32gb version ?
Maybe I didn't explained me the right way.
Is there any problem to flash, this way, a ROM for SIM unlocked G3 on a SIM locked G3?
[Q] D855 firmwares compatible with D855P?
Can I flash a stock firmware from a D855 to a D855P?
Mine LG G3 is D855P and come with the bloatware from the Carrier.
Moostafa29 said:
Anything for us Mac users?
Click to expand...
Click to collapse
I use a W7 VM with VMware Fusion on my Mac and it works.
Using Parallels instead of VMware Fusion should work too I read in another thread.
I've never owned an LG phone before. How can I know which firmware kdz files are right for me?
Sent from my LG-D855 using XDA Free mobile app
ariedam said:
Can I flash a stock firmware from a D855 to a D855P?
Mine LG G3 is D855P and come with the bloatware from the Carrier.
Click to expand...
Click to collapse
I'm on the same boat! Answers, please?
Hi evryone.
Recently I came across this guide, and it worked fine for me.
So I wrote a tool that basically does the same thing, just make things easier.
This method should work on any LG G3 official firmware (4.x.x / 5.x.x), and on other models too.
Please leave your feedback if it worked for you, and indicate whether you used the graphical user interface or the old script.
And if it's didn't worked, please attach here the log from the window.
Notes
I saw a lot of questions of G3 users about how to install Twrp after the root, so I will explain briefly:
For now, if you are on stock lollipop you can't just flash Twrp via flashify etc like the old days in KitKat, but you can follow this guide over here.
After the root, if you want for some reason (warranty etc) to unroot the phone, all you need to do is a full unroot from the SuperSU settings.
I don't know if this is enough to get OTA updates back, I'm still waiting for somebody else to answer this question. so please don't ask me about this any more because I really don't know the answer.
Devices confirmed working with this method (If your device isn't listed it's most likely still supported)
LG G3 (all variants)
LG G3 Beat
LG G2
LG G2 Mini
LG G Pro 2
LG G Pad
LG F60
LG L90
LG Tribute
LG Spirit
LG Volt
LG G Vista
A screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads
LG One Click Root 1.3 (Graphic UI)
LG_One_Click_Root_by_avicohh.exe
drive.google.com
LG One Click Root 1.2 (The old script method - try this if the Graphic UI version didn't work)
LG_Root_Script_by_avicohh.exe
drive.google.com
LG drivers
LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2.exe
drive.google.com
LG Verizon drivers
LG_VZW_United_WHQL_v2.20.0.exe
drive.google.com
Instructions
Install LG drivers if they are not installed yet.
Download the LG One Click Root file above and extract to some folder. (double click on the 7z exe file)
Enable Usb debugging on your phone. (Go to Settings > General > About phone > Software information, tap Build number seven times and then go to Settings > Developer options and turn on Usb debugging)
Connect your phone to pc.
If you are using the GUI version just run the LG One Click Root installer, or if you are using the script then double click on the LG Root Script.bat file, to run the script.
Follow the instructions.
If the phone not recognize, try to switch between MTP and PTP options.
If you got "MSVCR100.dll is missing" error, install Visual C++ Redistributable.
(64 bit users, also install this file and not the 64bit version)
Video tutorial
Big thanks to @qbking77
Enjoy!
If you like my work press Thanks, and feel free to Donate
Credit
@Unjustified Dev for the original guide
@Chainfire for SuperSU
@qbking77 for the video
---------------------------------------------------------------------------------------------------------------
Changelist:
LG One Click Root v1.3 - 13/04/15 (current)
A new version with a graphical user interface instead of a script.
Although the root process remains the same, it has been rewritten programmatically, so I hope it will solve problems on some devices.
LG One Click Root v1.2 - 23/03/15
Added instruction in the script to how enter download mode manually if needed.
LG One Click Root v1.1 - 22/03/15
Added support for Verizon users.
LG One Click Root v1.0 - 17/03/15
First version.
Finally one click root for lolipop. Thanks.
Works perfectly! Thank you!
It works. I have a f400s and v20g stock. I rooted with this method. Now can I install custom recovery like twrp to nandroid backup ?
Yes, you can.
Sent from my Nexus 5 using Tapatalk
Confirmed working on att D85020f
Work for G G2?
Thanks for simplified root method.:good:
If some one has tried on LG G2, please share with us.
Anyone tried to flash twrp to lolipop (D855) ??
Confirmed on
D855 / verizon / sprint
D802 / 0 / 1 / 3
Ls660
D620 / r
Sent from my LG-D855 using XDA Free mobile app
I've been waiting on this. Thanks so much.
You're welcome. Thank you for the guide and the link to here.
Sent from my Nexus 5 using Tapatalk
I followed all the steps but it was unsuccessful
I'm using Windows 8.1 x64 & LG G3 D855
agritux said:
Anyone tried to flash twrp to lolipop (D855) ??
Click to expand...
Click to collapse
Worked on my D855 32Gb V20f (Rom from Germany)
Just after a couple of reboots, supersu appears and the Lg G3 is fully rooted
LG G3 VS98512b
Will this work with LG G3 VS98512b?
I believe so.
But I don't know for sure.
Sent from my Nexus 5 using Tapatalk
good news . tonight I will try it.
So is this taken care of already in this root method. Will I have fast boot and laf after root?
What do I have worry about having an unsecured boot loader. What approach should I take for having root+fastboot+laf.
Do not work in D855 with 20A Lollipop version.
Anyone help?
D855 UK Stock Lollipop worked great.
najmulbappy said:
I followed all the steps but it was unsuccessful
I'm using Windows 8.1 x64 & LG G3 D855
Click to expand...
Click to collapse
Diguimir said:
Do not work in D855 with 20A Lollipop version.
Anyone help?
Click to expand...
Click to collapse
Please attach here the log from the CMD.
Just Copy & Paste.
Thanks.
Questions & Answers/Troubleshooting​[SIZE=+2]Specific to[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click link here>> to go to ROM thread <<Click link here
Please feel free to share issues, questions and offer help
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
Please keep discussion focused, on the topic described in the OP
Benxter said:
I don't know which Stock ROM you are using but mine has this. Drag down the status bar and tap the button next to the volume slider twice. No more notifications, vibration etc - just total silence.
Click to expand...
Click to collapse
That's the no interruptions mode, which is not silent mode. Alarms will not work.
sandys1 said:
did you try the new CloudyG2 3.1 with D803 ? if your patch works... it would be awesome!
Click to expand...
Click to collapse
I ran it on the D803. Works.
Guys! Come on! Why are there so many children around here. Keep the thread dev related so @Cloudyfa can keep track of what is important.
This is what happened during startup wizard for me. Navbar disappeared but locking and unlocking the phone brought them back.
About xposed installer, should i delete lg cover, and lg weather to make xposed works on this rom?
does it support xcam and its drivers?
Help
To Go from Cloudyg2 2.2 kit Kat to Cloudyg2 3.1 Lollipop do I need to flash a stock lollipop Rom or can i flash straight away.
Apologies if question is amateur.
Thank you Cloudy for your work.
tiagoSequeira said:
+1 please help
Click to expand...
Click to collapse
I have D802, also got bootlooped. I was using stock KitKat. I tryed clean flash multiple times, the same result.
I collected the details about installation:
Model: LG-D802
Name: cm_d802
Manufacturer: lge
CPU: armeabi-v7a
LCD Density: 480
Storage Size: 2728 MB
Free: 2677 MB
SDCard Size: -1 MB
Free: -1 MB
Google apps:
All
Miscellaneous:
None
Install log: pastebin[dot]com/AbShu8gB
If you have unlocked vs980 and having data issues with TMO network...
When i flashed the Rom for the first-time,
Setup wizard On the wifi network scaning page i entered my network details..and setup the phone..when turned the wifi off..there was no data.also the fast.tmobile.com apn was not installed . then i tried few things like flashing different radio,apn to get the data work but no luck.got bootloops(my fault)
Next time i flashed the rom again and did not enter wifi details on the setup screen and just let the phone force data settings ..data worked flawlessly.
I modified below build.prop entries as well..
ro.carrier=TMO
ro.build.target_operator=TMO
persist.service.crash.enable=1
Sent from my VS980 4G using XDA Free mobile app
Nussi29 said:
Read the OP !!
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
i read the op but should i go to stock lolipop 5.02 and then flash rom?
@lolo1313165
Yes And Install Autorec..
chandidas said:
i'm or resurrection remix, I installed this ROM after clean wipe.
Everything installed succesfully, Now the screen is going blank and if power button pressed LG logo is re-appearing.
Ne idea how to go to recovery mode? help please
Click to expand...
Click to collapse
Do the factory reset
1)Switch off the phone by holding power button for 10 to 15 seconds.
2) while holding the vol down button, press power button and release it when you see lg logo hold the power button..
3)follow the instructions to factory reset.
Sent from my VS980 4G using XDA Free mobile app
@g0xi
Are You Installing The Right One LP And The Correct device model from play store.
Then click on loliipop within the app and it will install,it will show the pop up that it is insatlled
I see some users got this working on d803 after installing the simple ROM patch. Which variant did you choose in Aroma when flashing the ROM?
Is ringtone id present? (google "ringtone id lg g4")
Thanks
I saw couple of posts with bootloop issue and yes you can fix it easily. Download package from this thread http://forum.xda-developers.com/lg-g2/general/d802-bootloader-changer-1-1-jb-kk-lp-t3104380 and install lollipop bootloader (This is offficial one and the partions scheme that Cloudyfa mentioned in point 1 of intruction set is addressed) and then try to install the rom post factory reset. You should be all set then.
How to solve slow charging?
Sent from my LG-D802 using Tapatalk
Jervisd said:
Did you get it to work on the D800 and if so, what did you do to get rid of the bootloop? I'm on Cloudyg2 3.0 with the patch which allows D800 to function.
Click to expand...
Click to collapse
No, I just restored my previous backup to get out of bootloop on my D800. Not sure what to do now... I don't want to go back to stock and take that painful route ;(
I tried KK bootloader, LP bootloader and nothing seems to work.
Azharkanorwala said:
@tung1984322
see this
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
my phone cant connect my pc
pc cant detect my use
Unfortunately mine was d802 Intl and didn't get hands on any other devices. The other workaround would be trying http://blastagator.ddns.net/bootloader.php the D80030F section.