So my phone downloaded the Lollipop OTA, which I didn't want to install. Thinking I'd gone into the cache partition and deleted it, I went ahead and let the phone reboot -- apparently I hadn't deleted it after all. So now every time I start up my phone, it boots into stock recovery and wants to automatically start updating to Lollipop.
Is there any way to boot to recovery while *skipping* the system upgrade process? I tried the regular VolUp/Home/Power thing, and that doesn't seem to do it.
Related
My G2 continues to boot to twrp. I have tried to flash a new rom and it says it is successful but reboots to twrp. I have also tried to restore from two back ups and again says successful but reboots twrp again. A software update came out today and accidentally hit to push and from that point all the phone wants to do is go to twrp. Any ideas on what I have to do to make the phone usable again?
Hello everyone and I apologize if there's been a solution to this before but I couldn't find it.
I was on Rooted stock V20F, and there was a new OTA update from LG (around 110 MBs). Before installing anything i made a backup from TWRP Recovery just in case anything went bad.
So after I download the official update, the phone reboots, and boots into TWRP recovery. From that moment, I can't get the phone to boot properly no matter what I do.
I tried restoring my backup, the phone will still boot into TWRP. Tried Factory Reset, Format Data, installing a new custom rom and nothing. It always brings me back to TWRP.
Also when i try to get into download mode so I can flash a KDZ file with flash tool, it boots into TWRP again.
Any ideas? Thanks a lot in advance.
edit: I actually found the solution here (it wasn't in the troubleshoot section and I didn't notice it..): http://forum.xda-developers.com/showthread.php?t=2451696
Is there any way to install official OTA updates without the phone freaking out?
Hi folks,
I recently rooted by N4. It was running Android 5.0.
I also have MultiROM installed, with CyanogenMod installed as a secondary ROM.
I didn't realise I couldn't apply the OTA updates to the stock Android system (my oversight), and I allowed the device to download and (attempt an) the recent 5.0.1 update from Google.
When the update attempted to reboot the device, I could see in the terminal data that popped up, that it failed.
After that device now gets stuck in the booting stage with the little coloured balls drifting around.
I continued to use my phone with the secondary ROM (Cyanogen) for some days until I had time to sort this out.
MY ATTEMPTED RECOVERY
I read that ordinarily on a rooted device one would manually apply the various image files from the full 5.0.1 package.
So, following instructions found here: http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Using method two (long method).
... In fastboot mode I flashed the system, boot, recovery, cache (after clearing cache), radio images from the 5.0.1 stock image.
At first I didn't flash the bootloader (as I wanted to maintain the multiboot loader I had installed) nor the user.img (I don't want to lose my user data). I read this should work. But it didn't.
When it came to booting into recovery mode to finish the process, an android icon with a ! warning on it would appear, and I could not do the recovery.
So, I have since flashed the bootloader also. That didn't change much, except that my dual-boot boot loader is now gone, and the device is still not recoverable.
Is there something I am not doing correctly? How can I recover this device so that it has 5.0.1, my existing user data, and my existing dual boot bootloader?
Cheers,...
May have solved it...
I'll post another update in a moment. Posting this just in case someone starts responding to my question in the interim.
After further fiddling around, I may have resolved this issue. I've managed to get it into recovery menu, rebooted from there, and device is now in "Android is updating" mode. Looking good.
Will post new message soon as to whether this was successful or not.
Issues continue
So, after the device booted a screen appeared for a fraction of a second, that appeared to be the screen for selecting system language (as per what happens when a device is first run after a clean install). But the screen almost instantly goes black except for the little network icon and battery icon and time in the top right of the screen.
If I use the power button to lock the screen and again to activate it, the screen very briefly flashed up the language selector, then goes blank again.
So... it seems something odd is happening after applying the 5.0.1 file.
Any suggestions?
Flash the 5.0.1 factory image with fastboot
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the 5.0.1 factory image with fastboot
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Well, this is what I resorted to doing. And it worked. Phone started and was as new. Of course, I lost my user data which is a ****. I did pull the SDCARD content over ADB, but am not sure how I'd go about pushing it all back on, into right locations, etc.
BUT—and it's a BIG BUT—when I re-rooted it and applied SuperSu, it couldn't be put into recovery mode any more. It would keep running through the SuperSu install process each time I'd attempt to go into Recovery.
I ended up ignoring this, and installing Busybox (with Play) and SuperSu.apk (via Play). But the SuperSU apk would keep saying its files needed to be installed/updated.
I forget the exact mess that unfolded, but eventually (after installing MultiROM) I could boot the phone as it would ALWAYS go into (custom) recovery.
So I starter the whole process again, with another clean install of 5.0.1, and yet now it is stuck at the bootloader (the little swirling balls screen).
AndroidWelcome said:
Well, this is what I resorted to doing. And it worked. Phone started and was as new. Of course, I lost my user data which is a ****. I did pull the SDCARD content over ADB, but am not sure how I'd go about pushing it all back on, into right locations, etc.
BUT—and it's a BIG BUT—when I re-rooted it and applied SuperSu, it couldn't be put into recovery mode any more. It would keep running through the SuperSu install process each time I'd attempt to go into Recovery.
I ended up ignoring this, and installing Busybox (with Play) and SuperSu.apk (via Play). But the SuperSU apk would keep saying its files needed to be installed/updated.
I forget the exact mess that unfolded, but eventually (after installing MultiROM) I could boot the phone as it would ALWAYS go into (custom) recovery.
So I starter the whole process again, with another clean install of 5.0.1, and yet now it is stuck at the bootloader (the little swirling balls screen).
Click to expand...
Click to collapse
Try a full wipe from Factory Recovery, and see if it will fix the bootloop.
Bootloop no more...
ariesgodofwar said:
Try a full wipe from Factory Recovery, and see if it will fix the bootloop.
Click to expand...
Click to collapse
(wiping the sweat from his brow...)
After many tedious hours of messing around with this beast... there is life beyond the bootloop.
Back to a stock install.
So, now I am wondering why the SuperSu/Root process didn't work on my last round on this.
The SuperSu installer would kick in EVERY time I went into Recovery mode, and would then reboot the phone. This made it impossible to do things with ADP because I essentially couldn't get into recovery mode. I wanted to push through some of the stuff I pulled using ADP before I wiped the phone previously.
I installed MultiROM (which includes TWRP [is that what it's called] recovery system. BUT then go stuck in a Recovery loop.
Not wishing to repeat that fiasco... does anyone more knowledgeable than I (not a difficult status to achieve) have any suggestions to what might have caused those issues?
Sprint LS980 in an odd state after trying to flash CyanogenMod 12.1
Ok... so I got two of these Sprint LG G2's. I was able to successfully flash the first one with a minimum amount of problems considering I was just learning how to do it.
This second one is a problem though. Here's what I did:
I tried to root but it could not due to the version of the Sprint firmware on the phone. I did the TOT stock flash to get it back to stock. That worked fine.
Then I was able to root it via ioroot. Once rooted, I installed FreeGee and tried to install TWRP, that didn't seem to work, so I installed CWM Recovery. I did option two on this thread to try to get the loki stuff installed using openrecovery-twrp-2.6.3.4-ls980. That "installed" and I was able to boot into it. I installed cm-12.1-20151125-NIGHTLY-ls980 (same one I used on the other phone). That would not install via CWM and gave an error about not being able to lokify (or something like that).
So I said, OK, I must have done something wrong, so I tried to redo stock flash again. That acts like everything works fine LGFlash does it's thing (using LS980ZVA_01.TOT), but the phone boots up and does not seem to finish the install process. The LG logo comes up and not the Sprint screen that I would expect. I can do this over and over again and the results are the same whether I let it sit for an hour or 10 minutes after flashing. So now, the phone boots, but I can't do anything with the touch screen, and will then go into a reboot loop (getting into the OS but rebooting shortly after). I CAN get into CWM where I can wipe data/factory reset and wipe cache partition. After I do that, the phone will boot and will let me interact with it, but after a short time (a few minutes I think), it will reboot again and be in the same state it was before I went into CWM. I tried to do a factory reset in settings. It would say that two reboots would occur, but then nothing happens.
I'm at a bit of a loss as to where to go from here. I don't think that it's an unrecoverable brick, but heck if I know how to fix it.
In between reboots, ADB does see the device in ADB Devices, but shows that it's offline, so I can push an APK to it.
Here are the options that I get in recovery mode:
Reboot System Now
Apply Update From External SD Card
Apply Update From Cache
Apply Update from ADB
Wipe data/factory reset
Wipe cache partition
Any assistance is greatly appreciated!
Ok.. well.. I downloaded and flashed ZVE and it seems to have greatly stabilized the phone. However, it seems that I have lost the ability to do download mode and recovery mode. I can still get into the device through ADB, but ioroot no longer is able to root the device, so I can't install any recovery. There is a system update available to install, but didn't want to do that unless I'm good an stuck in this mode.
I also don't seem to be able to enable the cellular service. I don't know if the update it wants to install would fix that or not.
Edit: I can still do ADB reboot recovery and get into recovery mode with these options:
Apply Update From External SD Card
Apply Update From Cache
Apply Update from ADB
Wipe data/factory reset
Wipe cache partition
Edit2: I was able to root with Stump. FreeGee won't run on ZVE, so not sure what to do from here. The phone does not work at all. None of the phone info is listed in About Phone. No IMEI or anything.
Edit3: I have been able to get TWRP installed and can boot into it. I have also verified that I can get into download mode now. I'm very concerned about my EFS info though. I did back it up, but not to the PC, so effectively I have no EFS backup and no way to recover the IMEI information. Not cool...
I was running xXx 4.5, and decided to "upgrade" to 5.0.
I did the usual, wiped data/system, then flashed.
I got stuck in a bootloop, and found I had to double back and wipe /data.
I did that, got stuck at the boot animation.
If I go back to recovery, all the data is jumbled, I assume encrypted? I flashed a different twrp for 8.0 compatibility, no change.
I can't push/sideload anything (roms, recovery zips sideload fine), it fails.
So I flashed the stock recovery in fastboot, rebooted there, and tried to sideload via adb the stock 8.0 flash files.
Now it works at it for a few minutes and just comes back as "Installation Failed".
Where do I go next? All i can get to is recovery, fastboot, bootloader.
I've already factory reset/wiped everything, so don't care if I lose anything anymore.
Help?
Thanks.
It appears I found a solution, just a few posts below my own! I hate it when that happens.
Anyways ,
https://forum.xda-developers.com/showpost.php?p=75364805&postcount=7
seems to have got the ball rolling, I was able to copy files to my phone while in twrp, which I couldn't do before, and currently have xXx installing. The first time it installed it didn't ask about encrypted/decrypted and didn't give me any warnings, this time it did.
xXx still won't boot after flashing, trying stock full flash file..
edit 2: Was able to flash full oneplus update file and boot. had to do a factory reset after rebooting as it was crashing a ton and wouldn't get through setup. It's been running fine since though. Now I'm a little skittish to try again, there are some root features I'd really like to still have.
I have a OnePlus 5 phone stuck in the Fastboot mode, been contacting them for days now but I still keep hearing the same excuses that the matter has been escalated to their tier 2 tech support team Nd would be contacted. Please is there a way to copy files off the phone in this state before it's flashed?