Hi guys, if someone here suffered from this kind of flickering >>VIDEO LINK.
How do you managed to fix it? What part did you change, the screen or the motherboard? Thanks. Really need some help. My phone now is unusable.
]]]]]] UPDATE 1[[[[[[[
Hi guys, just got my G2 back from the dead.
I send my G2 to a phone care in the city and they said my lcd is the problem, they changed the lcd+digitizer (the whole half of my G2 )and now the problem is gone. But When I got home I noticed vertical lines on my G2 when it is turned off, not really noticeable but if you look closely you can see the vertical lines and thinking that they change it with a low quality LCD. Even in white backgrounds you can see the lines but only if you have a clear eyes . I compared it to the original LCD and I don't see any vertical lines at all, it's all black. But the frame of the new lcd is solid like the original. So, in the future, will this new LCD survive or should I go the phone care again? Thanks!
***********UPDATE 2************
[UPDATE]
I think my G2 is working now after playing games for hours in 5 days, no flickering/stuttering/jittering noticed.
But, my IMEI was change and it was rooted jellybean when they give it to me. I don't know if they change the motherboard or the whole phone except for the body case and the new screen i purchased. I asked them about the changes of the phone because it's my second time returning the phone and the women on the counter said their tech just adjust something. I don't believe that, and then I saw the IMEI changed. I didn't ask why my IMEI was change, i'll wait til something goes wrong on my G2 and sue them. LOL.
I have some questions regarding this.
1) I'm not really sure if how an IMEI was change, is it for changing the motherboard?
2) Is it legal that they don't tell me what they change on my phone?
For now my G2 is still alive and no problem after upgrading to lollipop + root + twrp. Hope it goes all well now.
coowkeee said:
Hi guys, if someone here suffered from this kind of flickering >>VIDEO LINK.
How do you managed to fix it? What part did you change, the screen or the motherboard? Thanks. Really need some help. My phone now is unusable.
Click to expand...
Click to collapse
i went to lg service and they changed some filters on motherboard in 2 hours filter,EMI/Power 2 quantity i read on the paper. i was on warranty..
That looks crazy, it definitely would be a motherboard issue, or, I had a simliar issue while repairing them (I've re-sold about 20 of them) the flex ribbon sometimes gets dirty, or out of place(the one on the bottom under the speaker). You have to remove the back, then remove the speaker(6 screws I believe on the bottom, it;s an L shape). Once you do that, make sure the square flex cable is connected well, and there is nothing touching the circuit right under it(It has a plastic tape to keep it from touching).
The connector I'm referring to is right next to the USB one on the flex. For obvious reasons I got the image from ETrade supply. You can clean the connectors with 91% or higher alcohol, DO NOT use anything less.
OverClockeD_GR said:
i went to lg service and they changed some filters on motherboard in 2 hours filter,EMI/Power 2 quantity i read on the paper. i was on warranty..
Click to expand...
Click to collapse
I think i'm out of warranty because i bought it when it was newly released. Do you think lg sc will fix it by paying them cash?
Silentwidow said:
That looks crazy, it definitely would be a motherboard issue, or, I had a simliar issue while repairing them (I've re-sold about 20 of them) the flex ribbon sometimes gets dirty, or out of place(the one on the bottom under the speaker). You have to remove the back, then remove the speaker(6 screws I believe on the bottom, it;s an L shape). Once you do that, make sure the square flex cable is connected well, and there is nothing touching the circuit right under it(It has a plastic tape to keep it from touching).
The connector I'm referring to is right next to the USB one on the flex. For obvious reasons I got the image from ETrade supply. You can clean the connectors with 91% or higher alcohol, DO NOT use anything less.
Click to expand...
Click to collapse
Ok, thanks for the tip. Will try to clean it tom and update here. Do you think smoking in front of the phone makes it dirty?
they told me that it may happen cause of heat..and its common issue
dunno really happened to me after i flashed some loli roms.... and ye im sure they will fix but they will ask 100euro+ for sure.....
imagine even the girl that works there told me her screen starts doing it ..
Silentwidow said:
That looks crazy, it definitely would be a motherboard issue, or, I had a simliar issue while repairing them (I've re-sold about 20 of them) the flex ribbon sometimes gets dirty, or out of place(the one on the bottom under the speaker). You have to remove the back, then remove the speaker(6 screws I believe on the bottom, it;s an L shape). Once you do that, make sure the square flex cable is connected well, and there is nothing touching the circuit right under it(It has a plastic tape to keep it from touching).
The connector I'm referring to is right next to the USB one on the flex. For obvious reasons I got the image from ETrade supply. You can clean the connectors with 91% or higher alcohol, DO NOT use anything less.
Click to expand...
Click to collapse
Boom!!!!!
What he said
tiguy99 said:
Boom!!!!!
What he said
Click to expand...
Click to collapse
Now, I'll definitely try it. Watching some disassemble videos now. Hope it works. :angel: :angel: :angel:
coowkeee said:
Now, I'll definitely try it. Watching some disassemble videos now. Hope it works. :angel: :angel: :angel:
Click to expand...
Click to collapse
When you replace your lcd they always tell you to make sure you have both connectors securely in place above the usb connector. One of them is the ground connection to your LCD!
Make sure both are fastened correctly and test before you seal your phone back together.
Keep us posted
Silentwidow said:
That looks crazy, it definitely would be a motherboard issue, or, I had a simliar issue while repairing them (I've re-sold about 20 of them) the flex ribbon sometimes gets dirty, or out of place(the one on the bottom under the speaker). You have to remove the back, then remove the speaker(6 screws I believe on the bottom, it;s an L shape). Once you do that, make sure the square flex cable is connected well, and there is nothing touching the circuit right under it(It has a plastic tape to keep it from touching).
The connector I'm referring to is right next to the USB one on the flex. For obvious reasons I got the image from ETrade supply. You can clean the connectors with 91% or higher alcohol, DO NOT use anything less.
Click to expand...
Click to collapse
tiguy99 said:
When you replace your lcd they always tell you to make sure you have both connectors securely in place above the usb connector. One of them is the ground connection to your LCD!
Make sure both are fastened correctly and test before you seal your phone back together.
Keep us posted
Click to expand...
Click to collapse
Cleaned all the connectors and securely placed it well, but nothing happens. I think it really needs a change parts.
Thank you anyway.
OverClockeD_GR said:
they told me that it may happen cause of heat..and its common issue
dunno really happened to me after i flashed some loli roms.... and ye im sure they will fix but they will ask 100euro+ for sure.....
imagine even the girl that works there told me her screen starts doing it ..
Click to expand...
Click to collapse
I think we have the same cause of the problem. :/ First I have the yellow spots then this happens. :/
Will go to service center after I worked for cash, lol.
coowkeee said:
I think we have the same cause of the problem. :/ First I have the yellow spots then this happens. :/
Will go to service center after I worked for cash, lol.
Click to expand...
Click to collapse
Please keep us posted on the results after you get the new screen.
Share your thoughts on this thread
http://forum.xda-developers.com/lg-g2/help/screen-flickering-change-screen-t3069110
tiguy99 said:
Please keep us posted on the results after you get the new screen.
Share your thoughts on this thread
http://forum.xda-developers.com/lg-g2/help/screen-flickering-change-screen-t3069110
Click to expand...
Click to collapse
Hi guys, just got my G2 back from the dead.
I send my G2 to a phone care in the city and they said my lcd is the problem, they changed the lcd+digitizer (the whole half of my G2 )and now the problem is gone. But When I got home I noticed vertical lines on my G2 when it is turned off, not really noticeable but if you look closely you can see the vertical lines and thinking that they change it with a low quality LCD. Even in white backgrounds you can see the lines but only if you have a clear eyes . I compared it to the original LCD and I don't see any vertical lines at all, it's all black. But the frame of the new lcd is solid like the original. So, in the future, will this new LCD survive or should I go the phone care again? Thanks!
I hope someone here share their experience on their 2nd LCD. Thanks!
:crying: :crying: :crying:
[UPDATE]
After few days of youtube and playing games, my phone started stuttering/flickering again like on my first post -_-
I paid for the new LCD that they change, should I pay another bucks for the motherboard problem? or they'll give me a refund for the new LCD I bought that didn't fix my problem? Please someone reply me asap. Thanks
This error is on mainboard. Fix it is very simple. I has lot about 10$ for this solution.sorry bbecause my english's bad.
[UPDATE]
I think my G2 is working now after playing games for hours in 5 days, no flickering/stuttering/jittering noticed.
But, my IMEI was change and it was rooted jellybean when they give it to me. I don't know if they change the motherboard or the whole phone except for the body case and the new screen i purchased. I asked them about the changes of the phone because it's my second time returning the phone and the women on the counter said their tech just adjust something. I don't believe that, and then I saw the IMEI changed. I didn't ask why my IMEI was change, i'll wait til something goes wrong on my G2 and sue them. LOL.
I have some questions regarding this.
1) I'm not really sure if how an IMEI was change, is it for changing the motherboard?
2) Is it legal that they don't tell me what they change on my phone?
For now my G2 is still alive and no problem after upgrading to lollipop + root + twrp. Hope it goes all well now.
Hi guys, i have a similar problem. I bought a new lcd on aliexpress.....that is the video of the problem....
http://www.mediafire.com/watch/glzqihgdzz12jsj/Lgg2_lcd.mp4
The strange thing is , not in every operation make the same problem. after days i see that problem usually on facebook and a lot on clash of clans .
I make also a screenshot on the clash of clans and when i open the picture the screen flickering .....
its like when the phone show some combination of color make this problem
My Lg PRO 2 Phablet did the same from first turn on, flickering on and off, very dissapointed as i had mine direct from Hong Kong and couldnt send it back. What i did was to tak all of the screws out and take the plastic back off, then re fitted the back only, no screws and turned on, no more flickering. Then i put a couple of screws in and tried again, still no flicker, then after a couple of more screws by the sim socket it started to flicker again! Now i just run the phone minus a few screws, it must be a pressure thing!
Hi, i have exactly the same problem, specially in combination of colors (green red and blue most of the time). how did you manage to fix your phone ? did you change the mainboard ? thanks for your help.
Benz83 said:
Hi guys, i have a similar problem. I bought a new lcd on aliexpress.....that is the video of the problem....
The strange thing is , not in every operation make the same problem. after days i see that problem usually on facebook and a lot on clash of clans .
I make also a screenshot on the clash of clans and when i open the picture the screen flickering .....
its like when the phone show some combination of color make this problem
Click to expand...
Click to collapse
Hi, i watched your video, and i have exactly the same problem, specially in combination of colors (green red and blue most of the time). how did you manage to fix your phone ? did you change the mainboard ? thanks for your help.
Related
My screen has gone completely white.... I bought the phone online from an "authorized dealer" who won't reply to me now. I live in the US and O2 does not appear to have any US contact info... Am i screwed on this expensive phone i bought 6 months ago?
Anyone had experience with this?
S
stuart.myers said:
My screen has gone completely white.... I bought the phone online from an "authorized dealer" who won't reply to me now. I live in the US and O2 does not appear to have any US contact info... Am i screwed on this expensive phone i bought 6 months ago?
Anyone had experience with this?
S
Click to expand...
Click to collapse
I guess you already tried hard reset?.
Can you get to bootloader mode?.
Tried hard resets, and getting to bootloader mode, i think this is a malfunction with the actual device, I just need to find out how to get in touch with o2 support internationally, i was wondering if someone on here may have had this problem too.
Thanks.
white screen - connector loose?
I too have this problem - but if I twist the screen away from the keyboard I get the display back. I suspect there's a connector loose inside but haven't looked inside.
Anyone on the forum any experience of getting inside and reseating connectors?
xda operation
tophamn said:
I too have this problem - but if I twist the screen away from the keyboard I get the display back. I suspect there's a connector loose inside but haven't looked inside.
Anyone on the forum any experience of getting inside and reseating connectors?
Click to expand...
Click to collapse
Hello there,
I had to get inside my xda to replace the screen that one of my dear rug rats broke. it is quite easy to do, and you only need to get into the screen side of it to get at the conectors. spin the screen half way round and look at the bottom and you will see 6 small screws. take out the two furthest out and two in the middle nearest the screen side. if you take them all out the whole thing becomes hard to handle. the front cover should GENTLY leaver off, and the cables to it exposed. even if they look in place lift the catch holding them in place and take them out and wipe the contacts with a cloth. just be very carefull with the cable strips as they tear very easy. . any problems then PM me
TTFN
Jay
White Screen
Try www.gpsmidlands.co.uk they replaced my ribbon assembly the same day.
Xda Lcd Repair
Try http://www.pda-repairs.co.uk
Brilliant
thanks for this posting - worked perfectly once i had worked out that atually you need to remove the screws further away from the screen in the middle. but otherwise I have successfully resurected a brick into a working universal! thanks!
Sark
Ok I need help from the gods of xda
I dropped my tilt the other day. When I picked it up everything seemed fine, yet the screen was completely white. No signs of cracks or a broken lcd. So I've tried the following: Soft reset, Hard reset, took out the battery, took apart the phone and disconnected the lcd and then re connected it. Still the same problem. WHITE SCREEN!
I can still receive/make calls, when i touch the screen in places where i remember the menus to be it still responds due to the noise, also the open and close noise still sounds.
The phone was bought new on Ebay, so i don't have a warranty through them or AT&T. After much research I hear people saying the same has happened to their phones as well and that there is a ribbon or flex cable problem. Something about still giving power to the LCD but not data, thus the white screen.
Now what I dont understand is do I need a new LCD because it has that ribbon/flex cable on it???? (link)
or
Do I need this product?(link)
Both contain a "flex cable" so im confused and frustrated, someone please help! any ideas would help
whew bought an LCD with digitizer on ebay for $45 and fixed it. Very easy process
vsicarbon said:
whew bought an LCD with digitizer on ebay for $45 and fixed it. Very easy process
Click to expand...
Click to collapse
hi there, would it be possible to post the link to ebay item? i also need a new touch-screen.tnanks
I am curious about this as well. I have a friend who has a hermes and he mentioned to me that that his screen was starting to go white like explained here. I look at his phone and I also noticed that the bottom hardware keys were not working at all.
I am wondering if this same ribbon cable for the LCD would also be the same one for the bottom keypad and if I fix the screen the keys will become active again.
Anyone have any experience with this?
Thanks,
I am wondering if this same ribbon cable for the LCD would also be the same one for the bottom keypad and if I fix the screen the keys will become active again.
Click to expand...
Click to collapse
That i dont know but here is the link to the LCD screen w/ digitizer
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=350099750789&Category=162&_trksid=p3907.m29
Same product and vendor I got mine from. Shipping took 3 business days. I advice to buy the insurence
Park City said:
I am curious about this as well. I have a friend who has a hermes and he mentioned to me that that his screen was starting to go white like explained here. I look at his phone and I also noticed that the bottom hardware keys were not working at all.
I am wondering if this same ribbon cable for the LCD would also be the same one for the bottom keypad and if I fix the screen the keys will become active again.
Anyone have any experience with this?
Thanks,
Click to expand...
Click to collapse
Tuck in for a long read and perhaps no single answer for all cases:
http://forum.xda-developers.com/showthread.php?t=303872
In short, yes the d/pad cable and LCD screen connections are linked which is why it is not uncommon for the white screen to show up when the d/pad is not working.
To the OP - I would just point out that if you get the white screen after a fall it may just be a loose connection at the d/pad and no need for new parts.
Dismantling instructions here:
www.mikechanon.net
But let's not start discussing the white screen here, please use the first link I gave above if you need to post.
Mike
a user i dont recall now his name,fixed is whitescreen by replacing the camera,open the device and remove the camera module, reassemble to test.
Hi, I come on here quite a lot for information as it's an amazing resource! This time however, I'm attempting to give something back!
I experienced the "black screen on slide out" on Monday. Phone completely screwed. I've also had a few droppages and had it apart once before so there's no way warranty is gonna help!
I stripped it down and soon discovered what it is that actually fails on the ribbon. The coating had worn through due to rubbing on something during the slide out / in process. it had been playing up for a while, probably due to shorting out on the metal case, but now the tracks (aluminium?) had worn right down.....
In pic 1 i've circled the worn area. The shiny section is where i'd tried taping over it to prevent shorting, before i realised the tracks were gone.
Got an almost new one off ebay for 15 quid and, realising it was going to happen again, came up with a solution that, so far, looks like it will work....
A while back I bought some "anti rattle felt" for my car's dashboard - really thin and strong self adhesive felt to prevent squeaking joins between dash sections. I cut a piece of this and stuck it to the new ribbon. Once this stuff is on it's well stuck, by the way!
See pic 2 for the modded ribbon cable.
On reassembly everything is working just fine so far! Here's hoping that it lasts longer than 6 months this time!
Just need a new casing now as mine is decidedly second hand!
Hope this turns out to be of use to someone!
cool story bro
when i took apart my xperia to replace the housing this seemed like a really weak point in the device. glad to see someone who has had the problem has been able to fix it
Why does the screen go black?
Hi,
When the coating wears off the ribbon cable it exposes the tracks in it. when you slide the keyboard out the exposed tracks short out on the metal casing and the screen loses it's input signal.
thats whats happened on mine at least and i presume quite a few others?
HTH!
Update:
That's interesting: My phone was also losing signal with the keyboard out, and occasionally while closed up as well. It would just randomly drop to "no signal" for a few seconds.
It hasn't done it since replacing the ribbon cable.....could be coincidental of course.
I'm having the same problem
It just started a week ago and I got the phone in January off of ebay. I'm new to opening up the phone so could anyone help me find the correct tools or have a link to a site with pictured instructions?
I noticed that the sliding mechanism started to go loose about 4-5 months ago but didn't expect the screen not respond in landscape mode. I have yet to see the other symptoms you all are referring to. I would like to fix this before it get worse.
In mine case it went totaly black after one week of this problem... You have all the instruction on youtube, there is where i looked. For tools you can be inovative, but the exactly right ones come with housings from ebay, it is only 15EUR, and i bet you have some cracks so it wouldn't hurt replacing. That is what i did, along with ordering new sliding mechanizm, and new ribbon cable.
I am open for ideas to prevent my ribbon cable from being cut at it weakest point again.
I'm assuming my flex ribbon went bad yesterday, since sliding the keypad out causes my screen to shut off.
Already ordered a cable off ebay and will attempt to replace it myself :O
Replaced my flex ribbon cable with one I bought on eBay. The screen doesn't turn on at all now, which leads me to believe the cable I was sent is defective. Put the old one back in and it works okay, less landscape mode. ughhh what a pain.
great tips! my input is I bought a case off of ebay that was ~60$ and everything actually fit fine for me...so I wouldn't discount every seller but you do get what you pay for, the 15$ cases are probablly the ones that will give you problems
I working in a mobilephone repair center if anyone need help drop me a priv... i able to get 2nd hand or even brand new components
Replaced the flex ribbon cable -
I got my flex ribbon cable a few weeks ago and took it to my local repair shop. They replaced it but the LCD screen/optical joystick receives no power. The touchscreen and everything else on the phone works just fine now. I thought it was a defective item so it was exchanged with a new one.
Got the repair shop to replace it again and the outcome still remains the same as the first.
Theres no light coming from the screen nor the side illumination.
I just told the repair shop to just place the original back in for the mean time.
Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power botton.
Could it be defective a batch that the seller was sending out? or the repair shop's mistake and is playing dumb so they do not have to admint fault?
Hopefully there's an easy fix to this problem.
-Also I did inspect the ribbon before and after the repair. looks new as the OEm
Can anybody help me out with this new problem after replacing the cable -
perhaps you should try a hard reset. Ive had problems in the past where the optical joystick and the illuminators did not work, and that worked for me.
On the other hand, the top illuminators are on the same piece of hardware as the flex cable that was replaced, so a faulty flex cable is possible. The bottom illuminators are on the circuit board that the optical joystick attaches to, separate but connected to the flex cable.
Ive recently replaced my flex cable and touchscreen. The experience i had with the faulty touch screen was that it appeared to receive no power, but was in fact displaying a dark backlit illumination that could only be seen in the dark. At the same time however, the screen did not display anything. I'm not sure if this is similar to your experience, but if so then your touchscreen would need to be replaced.
ive done all repairs on the xperia myself, and one thing ive discovered is if something doesnt work right after a repair, simply disassembling it and reassembling it to make sure all the connections are properly done has worked for me in the past.
"Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power button."
Now when you say the power button, do you mean that a red light appears under it?
I dont know if i can come to a conclusion or that i can help (or have helped) you come to a conclusion, but i can only assure you that the xperia acts out in strange and weird ways.
Good Luck!
Tags
Dismantle / Disassemble Sony Ericson Xperia X1
http://www.ifixit.com/Teardown/Sony-Ericsson-XPERIA-X1/788/1
http://www.formymobile.co.uk/xperiadisassembly.php
http://www.youtube.com/watch?v=AWDurQrRt-Y (REAR)
http://www.youtube.com/watch?v=iyGUbxFqvyc&feature=related (FRONT)
http://www.youtube.com/watch?v=elgC8hwHfYQ&feature=related
For info.
Mike
Thanks for the links. I've tried the hardreset and restoring the original rom but the issue is still there. It's really bugging me that everything works but the LCD screen. I'm currently using MyMobiler to use my phone. The touch screen works fine and so does the soft keys. Just no power for the lights. I might just give up and wait for another phone that catches my eye and then tinker with the xperia myself. but if anyone got a solution or want me to test something then I'll give it a try.
My warranty is no longer affective so I'll use my phone as a tester to help others with any problems.
TRIONDAVE, how's your Xperia running now with the cable mod that you did? Its been 6 months since you created the thread. I hope you're still around.
My Xperia X1 works nearly fine, except for the keyboard issues, so I'm thinking of opening it up. If your Ribbon mod helped I might just do it too once I've got it opened. Mine has a MOUNTain of cracks though, and the battery compartment itself is cracked on both side enough to make the compartment CURVED. Hence the Battery cover doesn't sit well.
I'm looking around for broken Xperias which I might be able to use to change the internal cracked casing. Lets see.
DatDereX1 said:
cool story bro
Click to expand...
Click to collapse
My thoughts exactly.
Hello guys, I am in need of real help over here!
Its just that Ive replaced my ribbon cable, the old one got screwd up.
However I got done for 10 minutes ago, tried to start up the phone.. without success :,(
The ribbon cable doesnt have anything to do with the start up, only the screen am I correct? Cause I cannot even start my phone..
Ive connected the charger, but when I remove the battery it shows a red light, meaning no battery, correct?
So what may the problem be exactly? Maybe the battery is all dead, or?
PLEASE HELP!
for the people with ribbon failures how long have you had the phone before it occurred ? im just interested on the cables lifespan.
mine is fine so far but i have noticed the slider is flimsy and rocks left and right.
My screen started turning white awhile back. I now have a screen and a ribbon cable.
I replaced the screen first, and the new screen shows only white. Probably the cable, right?
Then I replaced the ribbon (keeping the new screen in) and still got only white.
Hooked the old screen back up with the new ribbon cable, and now I have a working screen, but the colors are horribly washed out and it looks like it has lines of white every other line or so.
Is there anything else I can do? Should I give up? Suggestions?
Thanks guys, I don't know if I've ever posted here, but you've been a great help for many years!
RoastGecko said:
My screen started turning white awhile back. I now have a screen and a ribbon cable.
I replaced the screen first, and the new screen shows only white. Probably the cable, right?
Then I replaced the ribbon (keeping the new screen in) and still got only white.
Hooked the old screen back up with the new ribbon cable, and now I have a working screen, but the colors are horribly washed out and it looks like it has lines of white every other line or so.
Is there anything else I can do? Should I give up? Suggestions?
Thanks guys, I don't know if I've ever posted here, but you've been a great help for many years!
Click to expand...
Click to collapse
Assuming the cable connectors are good and clean, it is now generally accepted that white screen issues are caused by faulty chip connections on the d-pad daughter board. If you can replace that at a reasonable cost, it might be worth it.
Your new screen may have been white because either:
1
The d-pad board is indeed faulty
OR 2
The new screen although made for the Hermes is not an exact match. You MUST replace like with like. There were at least 3 different and NON-compatible screens made for the Hermes (by different manufacturers - Toppoly, Samsung etc). The only easy way to know if the new screen is the correct one is to compare the code numbers printed on the rear of the screens.
see here: http://forum.xda-developers.com/showthread.php?t=485961
Mike
I'll have to keep a eye on eBay for a d-pad... There are a few parts phones out there now, but I can't tell if they have the right parts inside or not,
Does the serial number tell me what screen components it uses (IE Serial number XXXX+ came with the black flex, XXXX and below came with the white flex, etc?)
RoastGecko said:
I'll have to keep a eye on eBay for a d-pad... There are a few parts phones out there now, but I can't tell if they have the right parts inside or not,
Does the serial number tell me what screen components it uses (IE Serial number XXXX+ came with the black flex, XXXX and below came with the white flex, etc?)
Click to expand...
Click to collapse
It may be that you can match screen to seriel number, but so far as I know, nobody has done that detailed matchiing task. So unfortunately at the moment, the only way to tell is to dismantle and see the number.
A thought crossed my mind about the d-pad board. Have you read the long thread about fixing the whitescreen problem. One reasonably successful solution is to place a little padding on a d-pad chip to press it against it's board. (simply put the issue arises from fractured chip solder joints - caused by finger presses on the d-pad). I don't suggest this as a permanent fix, but if such padding caused the whitescreen to disappear, then at least you could be sure it is a d-pad problem.
Mike
My boss is a parnter in a Electric car conversion company, and they build all sorts of small circuitry (including surface mount stuff) so I'll take the board into one of them and ask if they'll re-do the solder joints for me, thanks.
I never posted here, but I got all the information I used to try and fix it here, but in all my searches, I don't think I ever read anything about the Dpad untill the past few days... So thanks alot for that...
RoastGecko said:
My boss is a parnter in a Electric car conversion company, and they build all sorts of small circuitry (including surface mount stuff) so I'll take the board into one of them and ask if they'll re-do the solder joints for me, thanks.
I never posted here, but I got all the information I used to try and fix it here, but in all my searches, I don't think I ever read anything about the Dpad untill the past few days... So thanks alot for that...
Click to expand...
Click to collapse
One thing if you have the solder reflowed (obvious to some but not all!!) remember to peel off the sticky plastic layer on the opposite side or you'll end up with a sticky mess
Mike
Hello, I have had my Axon 7 for just over a year and two days ago the screen went suddenly half static despite the touch still working perfectly. I looked up the issue and saw that this is pretty common and that my display connector was probably loose, so I opened up the phone to make sure the connector was fully connected. Well, I booted the phone and the static was still there, so I unplugged and reattached the connector, but that didn't help either.
Given that ZTE is bankrupt and my phone is out of warranty, is there anything else I can try at home to fix this or is my phone screen just dead? I'm in California, is there anyone who could possibly fix it in the state?
Thanks for your time!
Try pushing the connector down while it's booting and see if that fixes it.
greencartim said:
Try pushing the connector down while it's booting and see if that fixes it.
Click to expand...
Click to collapse
Alright, I'll try that. If it needs constant pressure I'm probably going to need to glue it or something?
DJRX8000 said:
Alright, I'll try that. If it needs constant pressure I'm probably going to need to glue it or something?
Click to expand...
Click to collapse
Tape could also work. I added tape to my back up Axon so it doesn't happen again. You could also add something so the frame can push against the connector.
Hey, unfortunately, pressing on the connector doesn't change anything with the screen. I even tried disconnecting it and cleaning out the contacts with a can of compressed air. None of this helped.
What are my next steps? I'd really love to get this phone working again.
Thanks!
Probably playing with the wrong connector, the half static screen is common problem, ZTE repaired mine a month ago as they are still actually operating. They said it was a connector and that they put something in there to make sure it doesn't move again.
trevor68 said:
Probably playing with the wrong connector, the half static screen is common problem, ZTE repaired mine a month ago as they are still actually operating. They said it was a connector and that they put something in there to make sure it doesn't move again.
Click to expand...
Click to collapse
Hey, that's possible, though when I unplug this connector the screen goes completely dead. Here's an annotated image of the connector I've been messing with and the foam pad that was installed on the back of the phone, I believe to keep it in place (my phone was bought in March 2017).
https://imgur.com/0d7C2xc <- That's an Imgur link to the photo, I can't seem to get it to show up as a hyperlink or embed it into the post.
Is this the wrong connector?
Thanks!
Yep that's the connector. I'm sorry to say but it looks like the screen is toast. I seen some Samsung Galaxy S7's that have the same issue but couldn't be fixed without a new screen. And since the Axon uses a Samsung screen, that might be the issue.
greencartim said:
Yep that's the connector. I'm sorry to say but it looks like the screen is toast. I seen some Samsung Galaxy S7's that have the same issue but couldn't be fixed without a new screen. And since the Axon uses a Samsung screen, that might be the issue.
Click to expand...
Click to collapse
Is there a place to get Axon 7 parts? I am not planning on using it as my main phone again, but if I could get a working screen I think I'd use the phone for something else. Are there any other screens that use this connector?
DJRX8000 said:
Is there a place to get Axon 7 parts? I am not planning on using it as my main phone again, but if I could get a working screen I think I'd use the phone for something else. Are there any other screens that use this connector?
Click to expand...
Click to collapse
Aliexpress has screens for sale, they came down in price the last time I checked.