I can't wipe data on my 9005, after i installed "DomPop URv1 TEKHD EDITION" , that just went in a bootloop, would love to wipe every thing,
so i could install another Rom, i have tryed Philz and TWRP, they will wipe every thing but data, so there is a lot of system failuer.
Sorry for my bad english.
I have solved the problem my self, never going to try that crappy Rom again.
Related
Hi,
i will start at the beginning. i got my S4 (i9505) with contract and branding Germany - Deutsche Telekom.
Today i rooted it with CF-autoroot and put twrp recovery in it - It was working.
Then i tried to flash Hox Hound Rom - bootloop. So i made a factory reset, wipe dalvik cache, cache. Put the battery out for about 3 min - many many times Still bootloop.
then i decided to go back to stock rom for a clean install - bootloop. (I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8_HOME.tar)
i can go to Download mode and recovery sometimes the recovery doesn't show up just the wallpaper.
Can someone PLEASE help.
Right now im downloading another stock rom ..
thanks
Metera said:
Hi,
i will start at the beginning. i got my S4 (i9505) with contract and branding Germany - Deutsche Telekom.
Today i rooted it with CF-autoroot and put twrp recovery in it - It was working.
Then i tried to flash Hox Hound Rom - bootloop. So i made a factory reset, wipe dalvik cache, cache. Put the battery out for about 3 min - many many times Still bootloop.
then i decided to go back to stock rom for a clean install - bootloop. (I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8_HOME.tar)
i can go to Download mode and recovery sometimes the recovery doesn't show up just the wallpaper.
Can someone PLEASE help.
Right now im downloading another stock rom ..
thanks
Click to expand...
Click to collapse
Flash Philz Touch recovery with Odin 3.04 in downloadmode, that should solve your problem.Link http://d-h.st/wSF. TWRP and CWM are buggy atm. After that you can flash Fox Hound Rom again.
Metera said:
Hi,
i will start at the beginning. i got my S4 (i9505) with contract and branding Germany - Deutsche Telekom.
Today i rooted it with CF-autoroot and put twrp recovery in it - It was working.
Then i tried to flash Hox Hound Rom - bootloop. So i made a factory reset, wipe dalvik cache, cache. Put the battery out for about 3 min - many many times Still bootloop.
then i decided to go back to stock rom for a clean install - bootloop. (I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8_HOME.tar)
i can go to Download mode and recovery sometimes the recovery doesn't show up just the wallpaper.
Can someone PLEASE help.
Right now im downloading another stock rom ..
thanks
Click to expand...
Click to collapse
did odin says "pass"?
bootloop fix:
-wipe cache and data from recovery, if not,
-restore nandroid backuo if present. if not,
-flash stock firmware with odin, make wipe after flashing, if not,
-flash pit file with the firmware in odin, make wipe after flashing.
samersh72 said:
did odin says "pass"?
bootloop fix:
-wipe cache and data from recovery, if not,
-restore nandroid backuo if present. if not,
-flash stock firmware with odin, make wipe after flashing, if not,
-flash pit file with the firmware in odin, make wipe after flashing.
Click to expand...
Click to collapse
Yes im always waiting for Odin "pass"
unfortunately i don't have a nandroid backup..
thanks i will try those tips
looks like it is working now. I don't know why. i left it on the desk for about an hour... and there it is... unfortunately only stock rom. i guess i will leave it that way never change a running system.
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Bhagwanie said:
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Click to expand...
Click to collapse
After flashing a rom Try wipe cache , dalvik reboot should work
if not wrkng then try flashing rom factory reset , wip cache , dalvik reboot
if u are using PHILZ recovery no plm but if u have other recovery have PHILZ that will be a solution
123hiten said:
After flashing a rom Try wipe cache , dalvik reboot should work
if not wrkng then try flashing rom factory reset , wip cache , dalvik reboot
if u are using PHILZ recovery no plm but if u have other recovery have PHILZ that will be a solution
Click to expand...
Click to collapse
Hi 123hiten,
Thank you for your reply.
- I flashed FoxHound ROM, wiped cache and dalvik cache. No success..
- I did a factory reset, wiped dflashed FoxHound ROM again, wiped cache and dalvik cache. No success.
- I flashed PhilZ recovery, did a wipe data/factory reset, flashed FoxHound ROM again, wiped cache and dalvic cache.. and again no succes..
I didn't understand what u meant in your last sentence with ''plm''?
I tried to flash the PACman ROM again, and it worked, but still I'm getting Force Close when someone calls me or if I'm trying to call someone.
I really dont know what to do now..
Bhagwanie said:
Hi 123hiten,
Thank you for your reply.
- I flashed FoxHound ROM, wiped cache and dalvik cache. No success..
- I did a factory reset, wiped dflashed FoxHound ROM again, wiped cache and dalvik cache. No success.
- I flashed PhilZ recovery, did a wipe data/factory reset, flashed FoxHound ROM again, wiped cache and dalvic cache.. and again no succes..
I didn't understand what u meant in your last sentence with ''plm''?
I tried to flash the PACman ROM again, and it worked, but still I'm getting Force Close when someone calls me or if I'm trying to call someone.
I really dont know what to do now..
Click to expand...
Click to collapse
Hi.
"plm" = problem
What firmware does your phone say it has got?
malybru said:
Hi.
"plm" = problem
What firmware does your phone say it has got?
Click to expand...
Click to collapse
I don't know where to see that, but I'm sure it's XXUBMF8.
That's the stock firmware I flashed.
Bhagwanie said:
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Click to expand...
Click to collapse
try this method...WIPE FACTORY RESET...WIPE CACHE PARTITION ...advanced > WIPE DAVILIK CACHE and BATTERY STATS...and then go to MOUNT AND STORAGE and FORMAT SYSTEM...and thn try to install the rom hope it will work
Hello, yesterday i want to flash PA 4.45, I have got twrp, so i wipe data and cache, instal pa, install gapps, and reboot, everything looks ok to the moment I open camera... and it says camera has stopped... so i decided to reboot my device, but after reboot its stuck in bootanimation of PA. please help
N
oppofind5 said:
Hello, yesterday i want to flash PA 4.45, I have got twrp, so i wipe data and cache, instal pa, install gapps, and reboot, everything looks ok to the moment I open camera... and it says camera has stopped... so i decided to reboot my device, but after reboot its stuck in bootanimation of PA. please help
Click to expand...
Click to collapse
MOD: can you move this to correct place?
This is probably the wrong forum for your question but you did not perform a full wipe before installing. You should try wiping data, cache, dalvik, factory data reset, and format /system and then install again. Also, please state what phone you are using.
Hello,
actually I'm using a SGS4 I9505 with cm-12-20150304-NIGHTLY-jfltexx and CWM 6.0.5.1.
I've tried to flash several TW Lollipop firmware wich i found in the I9505 forum:
1. Kushan+Touchwiz+Lollipop+Lite+Rom+v.1.2
2. S4_Echoev42_EchoePop2_020315
3. OA7-2.1F
4. XXUHA07-v2.01
Before flashing any oft this firmwares i made a factory reset, wiped both caches and installed the modem Firmware via Odin.
After flashing firmware # 1 and 2 my phone was stuc in a bootloop (only Samsung Galaxy S4 Logo appears).
Flashing firmware #3 and 4 fails and cwm reports error 7.
Flashing cm12 afterwards isn't a problem and runs fine.
I think the wipe fails or doesn't work properly. Is it enougth to select factory reset in cwm and wipe the dalvik cache manualy?
What can I do?
With besteht regard
Mirko (NemesisMF)
What if it is a recovery problem?
Thought about that too.
Should i try twrp or philz?
I switched to Philz Recovery and flashed S4 Echoe Rom v42 without any Problems.
CWM seems to have a problem to falsh TW Lollipop images ower an existing CM12 an the I9505.
You need to do full wipe not just cache.
ranger4740 said:
You need to do full wipe not just cache.
Click to expand...
Click to collapse
As I wrote above I did a factory reset before flashing and wiped the caches with cwm. If that is not enougth it would be nice to explain what else I have to wipe or post a link.
While using philz recovery the factory reset for clean system is enougth and the new System is working fine.
Factory wipe is not full wipe, you need to do a full wipe as in format to install new rom, phillz recovery has this feature can't remember exactly where, I think its under advanced.
Just have a look in the sub menus.
Just to explain it better when you do a full wipe it deletes every part of the existing
Rom including the system, data and cache and some other stuff completely removing the android operating system, so unless the rom you install does a wipe before install parts of the existing system will remain and can cause boot issues. For example as you've already discovered you are trying to install a tw rom over an existing cyanogenmod 12 installation which Will cause it to hang on boot.
NemesisMF said:
As I wrote above I did a factory reset before flashing and wiped the caches with cwm. If that is not enougth it would be nice to explain what else I have to wipe or post a link.
While using philz recovery the factory reset for clean system is enougth and the new System is working fine.
Click to expand...
Click to collapse
Do you mean a factory reset from within Android itself? If so, then that's a complete obsolete step. When before flashing a rom you should perform a factory reset, then they always mean a full wipe from the recovery. You need to do a full wipe from the recovery. That means the /system partition is being wiped. You will see it in the screen during the wipe if it wipes /system.
But it also could have been a problem of CWM. I don't think it is being updated anymore, so better use TWRP or Philz.
Hi,
I have G935F, installed TWRP 3.0.0.0 and rooted, WITHOUT wiping. System boots correctly, but I cannot do factory reset or wipe with TWRP, because I got some messages like "Cannot mount Data" and "Failed crypto loader". I understand that it has to do with encryption. Can someone please enlight me, and give me tips about the issue?
Thank you
Polemos82 said:
Hi,
I have G935F, installed TWRP 3.0.0.0 and rooted, WITHOUT wiping. System boots correctly, but I cannot do factory reset or wipe with TWRP, because I got some messages like "Cannot mount Data" and "Failed crypto loader". I understand that it has to do with encryption. Can someone please enlight me, and give me tips about the issue?
Thank you
Click to expand...
Click to collapse
You have to download dm-verity and force encryption disabler from here , put it to SD card, reboot into TWRP, FORMAT DATA (not wipe) and flash that file (dm-verity and force encryption disabler). All your data will be erased.
No way to unencrypt without loosing you data for the moment(
"All your data will be erased" means that after boot I'll find a clean system installation (as factory reset)?
I hope not to be posing stupid questions, I'm completely new to this world
Thank you very much
Yes just as a factory reset
Sent from my SM-G935W8 using Tapatalk
Ok, thank you all!!! ???
s it very important to wipe data?
Can I first flash the twrp ,second back up the rom by TWRP recovery
and then after factory reset ,I restore thw rom by twrp??
IS IT possible?
AGU PENG said:
Can I first flash the twrp ,second back up the rom by TWRP recovery
and then after factory reset ,I restore thw rom by twrp??
IS IT possible?
Click to expand...
Click to collapse
No, you cannot perform a backup, because your data is encrypted by default and the only way to disable it is to format your data.
I have a unique problem. I have a HTC Desire 612 from Verizon and I decided to revive it to playe PoGo. But it was stuck in a boot loop and I couldn't get any custom ROM.
Finally a gentle soul here gave me the stock rom and I flashed it vide TWRP and played PoGo for weeks. Then yesterday the phone bro led and when it came up it was stuck in a boot loop.
So I decided to flash the stock ROM again. But before that I tried to factory reset. I could go to TWRP, select wipe data, enter yes and the wiping was successful, then clear dalvic and cache and system beforehand finally I flashed the stock ROM.
Surprise surprise is NOTHING happens. The phone boots without the apps telling me they are installing. Then I get back the exact same data in my phone including my selected wallpaper and apps. Before I can do anything the phone restarts.
Point is wiping and restoring the stock ROM does NOTHING to the phone yet the processes are successful. Can somebody help?
vooks said:
I have a unique problem. I have a HTC Desire 612 from Verizon and I decided to revive it to playe PoGo. But it was stuck in a boot loop and I couldn't get any custom ROM.
Finally a gentle soul here gave me the stock rom and I flashed it vide TWRP and played PoGo for weeks. Then yesterday the phone bro led and when it came up it was stuck in a boot loop.
So I decided to flash the stock ROM again. But before that I tried to factory reset. I could go to TWRP, select wipe data, enter yes and the wiping was successful, then clear dalvic and cache and system beforehand finally I flashed the stock ROM.
Surprise surprise is NOTHING happens. The phone boots without the apps telling me they are installing. Then I get back the exact same data in my phone including my selected wallpaper and apps. Before I can do anything the phone restarts.
Point is wiping and restoring the stock ROM does NOTHING to the phone yet the processes are successful. Can somebody help?
Click to expand...
Click to collapse
HTC?? Wrong thread.
B3311 said:
HTC?? Wrong thread.
Click to expand...
Click to collapse
It really is about TWRP failing to wipe