Hello, yesterday i want to flash PA 4.45, I have got twrp, so i wipe data and cache, instal pa, install gapps, and reboot, everything looks ok to the moment I open camera... and it says camera has stopped... so i decided to reboot my device, but after reboot its stuck in bootanimation of PA. please help
N
oppofind5 said:
Hello, yesterday i want to flash PA 4.45, I have got twrp, so i wipe data and cache, instal pa, install gapps, and reboot, everything looks ok to the moment I open camera... and it says camera has stopped... so i decided to reboot my device, but after reboot its stuck in bootanimation of PA. please help
Click to expand...
Click to collapse
MOD: can you move this to correct place?
This is probably the wrong forum for your question but you did not perform a full wipe before installing. You should try wiping data, cache, dalvik, factory data reset, and format /system and then install again. Also, please state what phone you are using.
Related
I Flashed JellyTime ROM available here. I updated the Gapps too. The whole installation went smooth. Tab started with JT logo and then went blank. I waited for like 10 minutes and nothing happened. I tried twice but same result. So I went back to ICS4.0.3 stock.
Can some tell me if there is a newer JT ROM or am i doing someting wrong? I wiped cache and dalvik before flash.
PLEASE HELP:crying:
PuruTiger said:
I Flashed JellyTime ROM available here. I updated the Gapps too. The whole installation went smooth. Tab started with JT logo and then went blank. I waited for like 10 minutes and nothing happened. I tried twice but same result. So I went back to ICS4.0.3 stock.
Can some tell me if there is a newer JT ROM or am i doing someting wrong? I wiped cache and dalvik before flash.
PLEASE HELP:crying:
Click to expand...
Click to collapse
You have the V8 unlocked bootloader installed, correct? If not, you'll need to have it installed first.
If so, and a recent CWM installed,
sequence should be;
a. Wipe data/factory reset
b. Wipe Cache
c. Wipe Dalvik
d. Format /system
e. Install JT
Moscow Desire said:
You have the V8 unlocked bootloader installed, correct? If not, you'll need to have it installed first.
If so, and a recent CWM installed,
sequence should be;
a. Wipe data/factory reset
b. Wipe Cache
c. Wipe Dalvik
d. Format /system
e. Install JT
Click to expand...
Click to collapse
Great!! Thanks a lot!
Only step I had missed was format /system. I thought factory reset did just that, apparently I was wrong!
Thanks again. Loving my JB on A-501.
Just one issue, Google now voice search doesn't work.
And I noticed there is a phone app. So can I make a call??
Hi there
I seem to have a problem flashing 4.3 roms, actually any rom that isn't stock in general.
Right now I am running syzmel's 20E with 1.3ghz overclock version 3.09.
Back to the problem: this is the steps I take to upgrade to any rom: 1. Download (slimbean, vanir asop) 2. flash v20D (unmodded) 3. Root it using Framaroot 4. Install CWM using L7CWM.zip (extracted, then clicked on flash bootloader, flash recovery, and then booted into recovery) 5. Boot into CWM 6. Click on factory reset and reset 7. Go into mounts and storage and format /system 8. Go to advanced and wipe dalvik cache. 9. Flash either 4.3 version slimbean or Vanir ASOP (tell me which is better) 9. Flash gapps (Slimbean: Slim AIO minimal Gapps, Vanir: 4.3 minimal Gapps which is found in the Vanir ASOP page) 10. Factory reset again 11. Wipe dalvik 12. Reboot
Now as soon as I reboot, either it stays rebooting, or boots once and when you reboot it stays at the boot loading page (slimbean logo, or android logo) (In other words, once you go black, you never go back. Not being racist, just saying once it blacks out it doesn't work no more). So i retry. And then I give up and stick on v20E.
So please suggestions?
Also ignore my signature
AsianFoodRules said:
Also ignore my signature
Click to expand...
Click to collapse
Are you sure it wipes made correctly?
Danm, yes I'm sure.
Why you dont format cache and data & data/media ?
Did you try boot without gapps... Sometimes bad gapps cause a lot of problems
Sent from my LG-E610 using Tapatalk
When you factory reset it clears cache automatically. I'll try without Gapps.
wipe data,wipe cache wipe dalvic cache
AsianFoodRules said:
When you factory reset it clears cache automatically. I'll try without Gapps.
Click to expand...
Click to collapse
How do you factory reset? Factory Reset is NOT only wipe data
raul338 said:
How do you factory reset? Factory Reset is NOT only wipe data
Click to expand...
Click to collapse
Factory reset in CWM clears cache automatically.
....Anyway, I finally fixed it. Turns out I had to wipe EVERYTHING. Including /data and /data media. Thanks anyway guys.
LG Optimus L5 E610 - CWM Bootlooping
Basically I inserted a pre-rooted firware into my lg phone using 20d+root + cwm.kdz, everything was fine including the flashing, I some how got the the CWM recovery and done everything such as wiping cache, etc, but the problem was before and after the wiping, etc, is that everytime i press power button it turn off and on and back on to the CWM recovery screen not home screen with apps, etc.
I am really fustrated, please Help!:crying:
I flashed this rom "cm-10.2-20131014-UNOFFICIAL-e610" on my friend's LG Optmus L5 E610, then wiped data and cache and dalvik cahe, then i flashed "gapps-jb-20130813-signed", also wiped data and cache and dalvik cache then v20 baseband, also wiped everything. I clicked on reboot, and screen gone from white slowly to grey, and some green line were on bottom of phone, I've removed battery and then rebooted again, but it's same. And then a lot of colors on screen. Images are in attachment.
Please help me...
nikola3244 said:
I flashed this rom "cm-10.2-20131014-UNOFFICIAL-e610" on my friend's LG Optmus L5 E610, then wiped data and cache and dalvik cahe, then i flashed "gapps-jb-20130813-signed", also wiped data and cache and dalvik cache then v20 baseband, also wiped everything. I clicked on reboot, and screen gone from white slowly to grey, and some green line were on bottom of phone, I've removed battery and then rebooted again, but it's same. And then a lot of colors on screen. Images are in attachment.
Please help me...
Click to expand...
Click to collapse
man, you need to wipe data and cache and dalvik BEFORE to flash the CM, after flash the gapps and baseband WITHOUT any more wipes
you just installed gapps on nothing, after baseband on nothing
go back in cwm and wipe everything, install cm, gapps, baseband
Sabyn said:
man, you need to wipe data and cache and dalvik BEFORE to flash the CM, after flash the gapps and baseband WITHOUT any more wipes
you just installed gapps on nothing, after baseband on nothing
go back in cwm and wipe everything, install cm, gapps, baseband
Click to expand...
Click to collapse
After waiting of few hours phone booted into android OK.
Every next time it shows same white screen going to gray, then colors and it boot normally after 2-3 minutes, and it's working perfectly .
I was on rooted stock rom and decided to change my rom for the first time, i downloaded RGUI by gh.rohit , booted to recovery then cleared cache, data, system, dalvik cache, and then flashed the zip file, everything was fine then after completion when i pressed to reboot system, a pop up message came asking me to install supersu,i swiped to instal, and then my phone is in bootloop, currently going back to stock, but i want to instal RGUI , can anyone tell me where i went wrong?
Hi, I'm from Nougat 4.5.14 and these are the steps I made:
1. Flash codeworx then reboot to twrp
2. Wipe cache and dalvik
3. Install OS 5.0.2
4. Install magisk
5. Wipe cache dalvik
6. Reboot to system
However after rebooting to system it started bootlooping so I decided to reflash OS and wipe data as recommended. So I power off the phone then hold volume down + power to boot to recovery. However when I boot to recovery, file folders started to become random names like its encrypted. Luckily I backed up my internal storage and data so I'm okay to flash everything but can someone help me how to fix the twrp random file names and the steps for reflashing the OS?
EDIT: I rebooted to recovery, wiped dalvik, cache, and data. flashed OS 5.0.2, wipe dalvik cache, flashed magisk, wipe dalvik, reboot to system and it does not proceed to circling dots. So what I did is just, wipe dalvik, cache, data, flashed OS, wipe again dalvik cache, boot to system and it proceeds to circling dots however it takes so long that I can consider this as bootloop. I'm very tempted to wipe everything (data, system, internal storage, cache, dalvik) then just flash again the OS but I don't know if it would work so I hope someone could give me some steps how to fix this
Edit 2: This is solved now: What I did is just after trying the flash OS with no magisk, I booted to system. However, i just dont boot at all so I decided to boot to recovery again, but this time the recovery is the stock one. I wipe everything I could including cache, system reset, and data (music pics etc) and it booted to the system in no time but everythings lost.
You have to format data... Not just wipe it. From TWRP go to format data, write yes, and let it format everything. Then transfer over to the phone all the fil a you need (ROM, kernel, no verity zip) and flash them as per the instructions of your rom thread. You should be fine.
panooos said:
You have to format data... Not just wipe it. From TWRP go to format data, write yes, and let it format everything. Then transfer over to the phone all the fil a you need (ROM, kernel, no verity zip) and flash them as per the instructions of your rom thread. You should be fine.
Click to expand...
Click to collapse
What I did is just after trying the flash OS with no magisk, I booted to system. However, i just dont boot at all so I decided to boot to recovery again, but this time the recovery is the stock one. I wipe everything I could including cache, system reset, and data (music pics etc) and it booted to the system in no time but everythings lost.
Edit: nvm you've solved it
Peshyy said:
Edit: nvm you've solved it
Click to expand...
Click to collapse
You can still show other solutions as others may need it sometime