Database Users

Stock Recovery 4.4.4 XT1052

I have been looking for the stock recovery for my XT1052. I was not able to find it anywhere. With the help of @AGISCI , I was able to download the stock ROM for my moto x ( 1st gen. ) XT1052 ( actually Asia Retail ). The stock ROM was of European XT1052 but it has worked like a charm for my Asia Retail XT1052 . For fellow XDA Users, who want to return to stock so that they can receive the lollipop OTA, here's the stock recovery of 4.4.4.
p.s. : I would recommend getting completely back to stock ( so that there would be no problems while taking ota ) i.e., flashing boot, system and recovery. here's the link to stock ROM 4.4.4 XT1052. : http://www.filefactory.com/file/292..._4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF.xml.zip
I did not upload the Stock ROM. Credits go to the guy who has uploaded it. Thanks to @AGISCI for giving me the link to the stock firmware. Since the file is more than 8mb, it exceeds the limit. here's the link to it on my drive : https://drive.google.com/file/d/0BxPz5ZLKnceheExRNEZCaVd0ZGM/view?usp=sharing
I am not responsible if you flash this and brick your device.
THIS IS THE STOCK RECOVERY IMAGE FOR THE XT1052 ( 4.4.4 )
Cheers

flasherruts said:
...p.s. : I would recommend getting completely back to stock ( so that there would be no problems while taking ota ) i.e., flashing boot, system and recovery. here's the link to stock ROM 4.4.4 XT1052...
Click to expand...
Click to collapse
Just a clarification... flashing the ENTIRE ROM/SBF would get you "completely back to stock" Flashing boot, system and recovery only returns those 3 parts. Usually that is minimum which is enough to undo any changes and allow the OTA to install.
You mention you have an Asia Retail XT1052, but are suggesting flashing with EU XT1052 rom parts..
Keep in mind, the OTA's include a pre-validation check. It checks files and parts that are installed on the phone. Not just for do they exist, but are they the right version and checksum/SHA Hash. If even one thing doesn't match, the OTA will fail and not install.
So as long as these parts from the EU XT1052 rom 100% match the Asia XT1052 rom, you will be OK and the OTA will be successful. If anything is different, future OTA's could fail.
That being said, I'll admit I have not taken the EU and Asian roms apart to see if they match or not. I'm just giving the caution message because we have seen XT1058 ROMS vary around the world.

UPDATE: xt1052 asia 4.4.4 is available
you can find asia retail 4.4.4 which was recently uploaded(1-2 weeks back)
unfortunately i cant post links

TheTechDudex1999 said:
you can find asia retail 4.4.4 which was recently uploaded(1-2 weeks back)
unfortunately i cant post links
Click to expand...
Click to collapse
Yes, was posted to filefactory just over a week ago....
http://www.filefactory.com/file/3qr..._4.4.4_KXA21.12-L1.26_18_cid7_CFC_1FF.xml.zip

KidJoe said:
Just a clarification... flashing the ENTIRE ROM/SBF would get you "completely back to stock" Flashing boot, system and recovery only returns those 3 parts. Usually that is minimum which is enough to undo any changes and allow the OTA to install.
You mention you have an Asia Retail XT1052, but are suggesting flashing with EU XT1052 rom parts..
Keep in mind, the OTA's include a pre-validation check. It checks files and parts that are installed on the phone. Not just for do they exist, but are they the right version and checksum/SHA Hash. If even one thing doesn't match, the OTA will fail and not install.
So as long as these parts from the EU XT1052 rom 100% match the Asia XT1052 rom, you will be OK and the OTA will be successful. If anything is different, future OTA's could fail.
That being said, I'll admit I have not taken the EU and Asian roms apart to see if they match or not. I'm just giving the caution message because we have seen XT1058 ROMS vary around the world.
Click to expand...
Click to collapse
Hi buddy. Looks like you know your stuff, so I have a question regarding this.
I do have xt1052 (eu en retail). And due to being curious I've flashed the whole official package for US Developer Edition, taken from Motorola's site.
Looks like it was so freaking new that now when going back to 4.4.4 eu-en-retail I can't flash the very first image which is gpt.bin.
However all the other flashing steps went alright, and I'm back with my original rom.
My question is, what is that gpt.bin thing, and how important it is regarding the upcoming lolipop ota?
Thanks in advance.

Ciebiada said:
Hi buddy. Looks like you know your stuff, so I have a question regarding this.
I do have xt1052 (eu en retail). And due to being curious I've flashed the whole official package for US Developer Edition, taken from Motorola's site.
Looks like it was so freaking new that now when going back to 4.4.4 eu-en-retail I can't flash the very first image which is gpt.bin.
However all the other flashing steps went alright, and I'm back with my original rom.
My question is, what is that gpt.bin thing, and how important it is regarding the upcoming lolipop ota?
Thanks in advance.
Click to expand...
Click to collapse
GPT.BIN is the partition table. Its important. When GPT.BIN and MOTOBOOT.IMG are mismatched from the rom on your phone you could brick when taking an upgrade.
In most cases, the GPT.BIN has matched from model to model when on the same rom (i.e. GPT.BIN from XT1060 4.4.4 rom has matched GPT.BIN of XT1053 4.4.4 rom).
However, try Option 5 at -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html and see what happens.

KidJoe said:
GPT.BIN is the partition table. Its important. When GPT.BIN and MOTOBOOT.IMG are mismatched from the rom on your phone you could brick when taking an upgrade.
In most cases, the GPT.BIN has matched from model to model when on the same rom (i.e. GPT.BIN from XT1060 4.4.4 rom has matched GPT.BIN of XT1053 4.4.4 rom).
However, try Option 5 at -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html and see what happens.
Click to expand...
Click to collapse
Thanks for the reply!
The procedure you described at Option 5 is very similar to what I've been doing, but unfortunately invoking reboot-bootloader and trying to flash gpt.bin again, doesn't work. Although I'm on Mac and using the fastboot that comes with motorola stock files. I will try on windows later.

since the whole retail asia 4.4.4 xt1052 stock has been posted, I think there's no need of this thread. I'll request one of the mods to close this thread..

Thread closed @ the OPs request

V10C (V10d in build prop?) h815 EURO UNBRANDED Kdz download link

Checked everyday and today there is a new Kdz for my BAL euro h815.
It should be substantially the same update as in the other v10c thread but their could be a Brand version, mine is for sure for the euro UNBRANDED version.
I'm on root now so I can't flash it but anyone who flashes it pleas pull system.img to SD card and upload it (following the h815 backup system.img of the root thread).
Thank you all, HERE the link http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWEBK7M1324DAAA5C3C7U7F/H81510C_00.kdz

Yes, no brand. However it seems that version posted in the other v10c thread was for no brand too. If so, my mistake.
Changelog is the same as previous update and, as previously mentioned, it would become v10c but probably V10d in build prop

Can you back up your full partition and share it with me?
Can you back up your full partition and share it with me? I need it .please help me! mine is not the EUR's

What do you mean? There is a prerooted v10c(d) system.img on the root thread.
1. Flashed v10c(d) Kdz with normal flash
2. Rooted flashing prerooted v10c(d) system.img
3. Enjoy
Autoprime said that bootloader version is not incremented so you can always downgrade flashing previous Kdz

Mine is branded 815 USA. Used the prerooted 10D system file however in about it still says 10b..?

xxsashixx said:
Mine is branded 815 USA. Used the prerooted 10D system file however in about it still says 10b..?
Click to expand...
Click to collapse
Which model 815 do you have?

TonyStark said:
Which model 815 do you have?
Click to expand...
Click to collapse
USA variant. I'm on the 10D prerooted system image atm

xxsashixx said:
USA variant. I'm on the 10D prerooted system image atm
Click to expand...
Click to collapse
The title states
h815 EURO UNBRANDED Kdz

So if we aré rooted, and the ota arrives, can we just go asead and install it without brick issues? Just lose the root? I am in 10b SEA variant

xxsashixx said:
Mine is branded 815 USA. Used the prerooted 10D system file however in about it still says 10b..?
Click to expand...
Click to collapse
Some people noticed this when they flashed the rooted 10c image. It still showed 10b. It's not an issue, just ignore it
Or you could try flashing again over the top of itself to see if that fixes it.

the_scotsman said:
Some people noticed this when they flashed the rooted 10c image. It still showed 10b. It's not an issue, just ignore it
Or you could try flashing again over the top of itself to see if that fixes it.
Click to expand...
Click to collapse
Seems to work now.. I flashed the kdz in OP on my H815 (USA variant). Shows 10C now

I am using a branded Vodafone Euro H815, can i unbrand the phone with this version?

Full partition backup file for EUR's
oile said:
What do you mean? There is a prerooted v10c(d) system.img on the root thread.
1. Flashed v10c(d) Kdz with normal flash
2. Rooted flashing prerooted v10c(d) system.img
3. Enjoy
Autoprime said that bootloader version is not incremented so you can always downgrade flashing previous Kdz
Click to expand...
Click to collapse
Full partition backup file for EUR's G4.Mine is the US G4. I need it .Your mobile is EU's

I flashed this to my O2UK Branded G4 in the hope to become unbranded. Everything seems to work fine and the update feels really smooth. The only issue I have is that I get this error on boot:
WARNING!
Current version is not available for user. Can't find matched cust for NT-code mmc/mnc[23410], subset[02]
maybe someone knows what this means? Like I say everything seems to work like data and calls so I'm happy to just ignore it for now.

There is a flashable zip?I need it bc i have twrp and i dont want to lost my data:laugh:

Solidier09 said:
There is a flashable zip?I need it bc i have twrp and i dont want to lost my data[emoji23]
Click to expand...
Click to collapse
Nope ...but you wont regret flashing it...for me it is a much better build than the last one ?
Verstuurd vanaf mijn LG-H815 met Tapatalk

I have a 10/b with unlocked bootloader, after flashing 10c with lg flash tools, can I root it with low effot method?

You can flash Kdz choosing "normal" this will not erase your data partition.
Yes failax you can root using a prerooted v10d image

This is the Best version even charging is a bit faster now with the screen on. Before it would just stay there not moving up when screen is on.
Sent from my LG-H815 using Tapatalk

Mayorse said:
Hello maybe you can help me, I'm on the the 10b/c build for the H815 G4 and Im rooted unlocked bootloader using this method:
http://forum.xda-developers.com/g4/general/howto-unlock-twrp-root-1-thread-t3130538
Now a new method for root has poped up over here but it says if your firmware doesn't match i will need to OTA to the proper version or wait.
http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765
Can you please clarify for me your steps either here or by private message as i want to upgrade to the latest 10c/d patch. i'm coming form samusing based phone and im little confused by flashing pre-rooted images and the root method went waaaaaaay over my head.
If anyone else can help point me in the right direction I'd appreciate it.
Click to expand...
Click to collapse
With an unlocked bootloader you won't need the "low effort root" - just update with KDZ and install root through twrp again...
Greetings
Medzinmann

No wifi, imei working for Moto G4 Plus XT1643(indian version)?

I was stuck on boot loop while rooting my Moto G4 Plus(Indian Version) so I downloaded the stock rom from File Factory where the file name was "G4_XT1641-XT1643_ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml_2" for XT1643 version. While flashing through cmd there were some errors like "image not signed or corrupt " and I ignored them as I was half way through. After completing the process, my phone booted successfully. Now, I'm not able to Turn on my wifi, there is no imei so no cellular network, rest all everything is working fine. I googled a lot for Moto G4 Plus stock rom and everywhere I was redirected to only on link which was from File Factory. I even formatted the phone but there was not change, even re flashed the same rom but still no success. Please help, it was the first day of my phone and this happened

try this file factory link from this thread
and do check the post replies too which might help you & i see lot of users are facing this issuse
edit:
and quick search through all the post replies found a reply that a user is able to fix wifi & sim in this link
if this works do post a reply so it might be useful for other members

joshfire2007 said:
try this file factory link from this thread
and do check the post replies too which might help you & i see lot of users are facing this issuse
edit:
and quick search through all the post replies found a reply that a user is able to fix wifi & sim in this link
if this works do post a reply so it might be useful for other members
Click to expand...
Click to collapse
Yeah it's working.. I found this before you quoted.. Thanks though

i am also facing the same problem i have moto g4 plus XT1643 32gb /3 gb ram(india) i have flashed XT1626-XT1640-XT1641_ATHENE_6.0.1_MPJ24.139-23.1_cid50_subsidy-DEFAULT_CFC.xml.zip this rom and also this one XT1641-XT1643_ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml.zip but i am getting a problem of no cellue network and its not showing me finger print lock and file factory website is blocked in india

harsh9987 said:
i am also facing the same problem i have moto g4 plus XT1643 32gb /3 gb ram(india) i have flashed XT1626-XT1640-XT1641_ATHENE_6.0.1_MPJ24.139-23.1_cid50_subsidy-DEFAULT_CFC.xml.zip this rom and also this one XT1641-XT1643_ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml.zip but i am getting a problem of no cellue network and its not showing me finger print lock and file factory website is blocked in india
Click to expand...
Click to collapse
Same here brother

same problem no network no finger print...any solution?
harsh9987 said:
i am also facing the same problem i have moto g4 plus XT1643 32gb /3 gb ram(india) i have flashed XT1626-XT1640-XT1641_ATHENE_6.0.1_MPJ24.139-23.1_cid50_subsidy-DEFAULT_CFC.xml.zip this rom and also this one XT1641-XT1643_ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml.zip but i am getting a problem of no cellue network and its not showing me finger print lock and file factory website is blocked in india
Click to expand...
Click to collapse
same problem no network no finger print...any solution?
---------- Post added at 12:49 PM ---------- Previous post was at 12:48 PM ----------
sabithmk said:
Same here brother
Click to expand...
Click to collapse
same problem no network no finger print...any solution?:crying:

any help? ? ? ?please
jayeshaupe90 said:
same problem no network no finger print...any solution?
---------- Post added at 12:49 PM ---------- Previous post was at 12:48 PM ----------
same problem no network no finger print...any solution?:crying:
Click to expand...
Click to collapse
can anyone help?

jayeshaupe90 said:
can anyone help?
Click to expand...
Click to collapse
Looks like you flashed the wrong firmware at some point, your baseband is reporting the wrong version for example. Also, losing Wi-Fi and IMEI could be caused by the wrong firmware. What's also not good is that your device is reporting itself as a G4 rather than a G4 Plus... What firmware did you flash?
You could try flashing either this firmware (a signed stock firmware for XT 1643 devices) https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695 which is build number 139-63 or reflash the MPJ24.139-23.1 firmware (which I think is the Marshmallow firmware for Indian devices, I recommend that you verify this yourself before flashing). You may find the 23.1 firmware here in the XT1640 folder https://firmware.center/firmware/Motorola/Moto G4 (Plus)/Stock/XT1640/ or check the links in this thread. https://forum.xda-developers.com/moto-g4-plus/help/skus-build-t3427601
I'm hoping that when you re-flash your Wi-Fi and IMEI are restored though no guarantees unfortunately, good luck either way.

echo92 said:
Looks like you flashed the wrong firmware at some point, your baseband is reporting the wrong version for example. Also, losing Wi-Fi and IMEI could be caused by the wrong firmware. What's also not good is that your device is reporting itself as a G4 rather than a G4 Plus... What firmware did you flash?
You could try flashing either this firmware (a signed stock firmware for XT 1643 devices) https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695 which is build number 139-63 or reflash the MPJ24.139-23.1 firmware (which I think is the Marshmallow firmware for Indian devices, I recommend that you verify this yourself before flashing). You may find the 23.1 firmware here in the XT1640 folder https://firmware.center/firmware/Motorola/Moto G4 (Plus)/Stock/XT1640/ or check the links in this thread. https://forum.xda-developers.com/moto-g4-plus/help/skus-build-t3427601
I'm hoping that when you re-flash your Wi-Fi and IMEI are restored though no guarantees unfortunately, good luck either way.
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695
i flashed this firmware.

jayeshaupe90 said:
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695
i flashed this firmware.
Click to expand...
Click to collapse
Did flashing that firmware fix your imei? Also, what stock firmware did you flash before you lost WiFi and imei?

echo92 said:
Did flashing that firmware fix your imei? Also, what stock firmware did you flash before you lost WiFi and imei?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mot...igned-t3460695
This is what the firmware i flashed before also..now my midel number has changed from moto g4 plus to moto g4 and my network and fingerprint sensor is not working.

jayeshaupe90 said:
https://forum.xda-developers.com/mot...igned-t3460695
This is what the firmware i flashed before also..now my midel number has changed from moto g4 plus to moto g4 and my network and fingerprint sensor is not working.
Click to expand...
Click to collapse
Hmm, that's odd, as I've used that same signed ROM without losing imei. You've repeated the flash with a fresh copy of the stock ROM and you're on a XT1643? Can you describe what flashing you've performed? Did you also try rolling back to the earlier marshmallow build? (Again, please verify it's suitable for your device)
Lastly, can you reboot to your bootloader, plug your device into your computer and, in adb, execute 'fastboot getvar all' and post the output here? You may wish to remove your serial and imei from the output.
I hope others will be able to suggest steps, else it may require a service centre repair.

Is this helpful?
echo92 said:
Hmm, that's odd, as I've used that same signed ROM without losing imei. You've repeated the flash with a fresh copy of the stock ROM and you're on a XT1643? Can you describe what flashing you've performed? Did you also try rolling back to the earlier marshmallow build? (Again, please verify it's suitable for your device)
Lastly, can you reboot to your bootloader, plug your device into your computer and, in adb, execute 'fastboot getvar all' and post the output here? You may wish to remove your serial and imei from the output.
I hope others will be able to suggest steps, else it may require a service centre repair.
Click to expand...
Click to collapse
I got this

jayeshaupe90 said:
I got this
Click to expand...
Click to collapse
Thanks, looks like at some point your device was flashed with US firmware, the fingerprint reports as MPJ24.139-64, which is the latest US MM based firmware. The Indian stock ROM should be reporting 139-63/64.
You can try to re-flash using the Asia/Indian specific firmware, which given from your recent posting, I see you've been hunting, to try to revert back to your proper firmware. Again, as I've previously stated, should be the 139-23.1 build but again confirm this before flashing, and be aware this may not work still.

This is it
jayeshaupe90 said:
I got this
Click to expand...
Click to collapse
Sorry this is the file not before one

Should i flash this?
echo92 said:
Thanks, looks like at some point your device was flashed with US firmware, the fingerprint reports as MPJ24.139-64, which is the latest US MM based firmware. The Indian stock ROM should be reporting 139-63/64.
You can try to re-flash using the Asia/Indian specific firmware, which given from your recent posting, I see you've been hunting, to try to revert back to your proper firmware. Again, as I've previously stated, should be the 139-23.1 build but again confirm this before flashing, and be aware this may not work still.
Click to expand...
Click to collapse
I am using the xt1643 indian variant. Should i flash this XT1640-XT1641_ATHENE_6.0.1_MPJ24.139-23.1_cid50_subsidy-DEFAULT_CFC.xml . ?

jayeshaupe90 said:
Sorry this is the file not before one
Click to expand...
Click to collapse
Doesn't really change matters - the installer still detects your device as athene, a G4 (rather than athene_f, a G4 Plus) and as such has flashed the G4 specific firmware onto your device.
I can't think of anything else to try except submitting your device for a service centre repair - this thread details a similar situation as yours: https://forum.xda-developers.com/moto-g4-plus/help/moto-g4-pluss-model-changed-to-g4-lost-t3496912 and looks like the outcome was to either have your device repaired or buy a new one.
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
jayeshaupe90 said:
I am using the xt1643 indian variant. Should i flash this XT1640-XT1641_ATHENE_6.0.1_MPJ24.139-23.1_cid50_subsidy-DEFAULT_CFC.xml . ?
Click to expand...
Click to collapse
Appears to be the same firmware that Indian XT1643 devices came with initially (and that's what I mentioned to you in a previous post too), but double check by searching on XDA and other platforms.

echo92 said:
Doesn't really change matters - the installer still detects your device as athene, a G4 (rather than athene_f, a G4 Plus) and as such has flashed the G4 specific firmware onto your device.
I can't think of anything else to try except submitting your device for a service centre repair - this thread details a similar situation as yours: https://forum.xda-developers.com/moto-g4-plus/help/moto-g4-pluss-model-changed-to-g4-lost-t3496912 and looks like the outcome was to either have your device repaired or buy a new one.
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
Appears to be the same firmware that Indian XT1643 devices came with initially (and that's what I found), but double check by searching on XDA and other platforms.
Click to expand...
Click to collapse
But still can i try flashing the 139.23.1 build?
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
jayeshaupe90 said:
But still can i try flashing the 139.23.1 build?
Click to expand...
Click to collapse
Let me give a try...will let you know

jayeshaupe90 said:
But still can i try flashing the 139.23.1 build?
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
Let me give a try...will let you know
Click to expand...
Click to collapse
not working..my life is miserable...please do help someone

Xt1644 us firmware

Can some provide firmware or links to US XT1644 FIRMWARE? Thanks

Try here : http://forum.xda-developers.com/moto-g4-plus/how-to/guide-newbie-resource-thread-t3386584
*Edit*
https://www.androidfilehost.com/?a=show&w=files&flid=72578

DJTeeJay said:
Try here : http://forum.xda-developers.com/moto-g4-plus/how-to/guide-newbie-resource-thread-t3386584
*Edit*
https://www.androidfilehost.com/?a=show&w=files&flid=72578
Click to expand...
Click to collapse
Any idea for what device the image ATHENE_AMZ_MPJ24.139-64_65_cid50_amz.tgz on https://www.androidfilehost.com/?a=s...les&flid=72578 is meant ?
(AMZ = ?)
I am currently running ATHENE_MPJ24.139-49_cid50_subsidy-DEFAULT_CFC.xml.zip from this source, on my XT1642 (channel reteu)

Maybe Amazon?

I appreciate everybody's help. However I can't tell if the the correct firmware listed is for US XT1644 FIRMWARE. I see I have the correct build. I have as of yet not unlocked my device. However I want to load my own backup all my images using dd command except data. Upload and post links for the United States build, as I just don't see nothing. Any help to the stock build United States build XT1644 would be great? Thanks
Also when unlocking the my device is there any issues I will run into, off the top of your heads?

Search here:
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=100
There are three images with xt1644 RETUS.

Bender1987 said:
Search here:
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=100
There are three images with xt1644 RETUS.
Click to expand...
Click to collapse
Thanks guy. Looks like someone took down the files. Not sure why, any other link to XT1644_ATHENE_RETUS_MPJ24.139-48_cid50_subsidy-DEFAULT_regulatory-XT1644_CFC.xml.zip

I've start downloading the file this morning without any problems. The FileFactory folder link is not down neither the files in it.

https://mirrors.lolinet.com/firmware/moto/athene/official/RETUS/
https://mirrors.lolinet.com/firmwar...subsidy-DEFAULT_regulatory-XT1644_CFC.xml.zip

9 is the latest firmware for the US model. im not sure what the very bottom one "harpia" is for?

I have bought mine unlocked and it is "retus". It has the MPJ 24.139-48 fw. Radio is M8952_70009.08.03.45R ATHENE_RETUSA_CUST.
If I check the update it says it's up-to-date.

pv979 said:
Any idea for what device the image ATHENE_AMZ_MPJ24.139-64_65_cid50_amz.tgz on https://www.androidfilehost.com/?a=s...les&flid=72578 is meant ?
(AMZ = ?)
I am currently running ATHENE_MPJ24.139-49_cid50_subsidy-DEFAULT_CFC.xml.zip from this source, on my XT1642 (channel reteu)
Click to expand...
Click to collapse
ATHENE_AMZ_MPJ24.139-64_65_cid50_amz.tgz is for the Indian variants, not the US nor European variants.
fix-this! said:
9 is the latest firmware for the US model. im not sure what the very bottom one "harpia" is for?
Click to expand...
Click to collapse
Harpia is the codename for the Moto G4 Play. Athene is the G4/G4+.

Thanks everybody for helping out. Please continue to write more info about the US XT1644 as there is not alot in on this model.

SoNic67 said:
I have bought mine unlocked and it is "retus". It has the MPJ 24.139-48 fw. Radio is M8952_70009.08.03.45R ATHENE_RETUSA_CUST.
If I check the update it says it's up-to-date.
Click to expand...
Click to collapse
yup but .9 is the latest. it has fixes for battery and the phone. i flashed it via fastboot on my XT6144 and it works great.

Well, the -49 (not 9) it's not to be found on Moto US website or OTA, it just appeared here like magic and the change log (supposedly) here. So I am not sure about it's provenience and that the fixes are not a placebo.
Anyway, I understand the "itch" to install it. Because I am so tempted myself
LE: Well, I did it. Flashed the MJP24.139-49 on my XT1644, I am restoring the apps now from backup.

Are these TWRP flashable or fastboot?

Yes, fastboot is avail after you unlock the bootloader on Motorola site (loosing the warranty).
I have booted into TWRP to root (SU systemless method), but didn't actually flash it (because I don't plan to switch to CM at this point).

SoNic67 said:
Yes, fastboot is avail after you unlock the bootloader on Motorola site (loosing the warranty).
I have booted into TWRP to root (SU systemless method), but didn't actually flash it (because I don't plan to switch to CM at this point).
Click to expand...
Click to collapse
I'm already on CM but there's the bug preventing me from receiving calls unless I turn off LTE. I'd prefer to not lose root and don't have access to a PC, so if I can wipe and flash this in TWRP, that would be perfect.

No, you can't, you need the standard recovery to get back to stock. Then you can root as I said.
As for CM13, I had used it (beta and after that nightlies) on one of my previous devices (Asus, based on Snapdragon 615, 64 bit, 3GB RAM)... but it was too unstable to use as a daily phone. Always something to be "fixed" and very often something else was breaking. Disappointed...

Security Patch Level
Can someone who has flashed the -49 build confirm what the security patch level is? Just wondering if it's the same update India and Europe received OTA.

N Firmware & modem without going back to stock firmware?

Hi guys,
I switched from Stock MM directy to CM 14.1.
Is there a way for me to get N Firmware & modem without going back to stock?
Thanks in advance

a little push

Das_OSi said:
Hi guys,
I switched from Stock MM directy to CM 14.1.
Is there a way for me to get N Firmware & modem without going back to stock?
Thanks in advance
Click to expand...
Click to collapse
If you read the threads for updating to N soak test you will see that it is not possible as you need to sideload the N soak test with official recovery. Only with soak test you receive all firmware files which isn't possible with flashing modem only. And please don't push.

The "official" that rolls out now in India is the same version that pas posted here on Dec 11:
http://forum.xda-developers.com/moto-g4-plus/how-to/captured-ota-nougat-ota-moto-g4-plus-t3517059

Hello again,
haven't been here for a while...
I'm still facing problems with 4G and the camera, because I'm still not on N Firmware & modem :angel:
Has something changed about this process?
Do I still need to go back to stock or is there an easier way now?
Huge thanks in advance

Das_OSi said:
Hello again,
haven't been here for a while...
I'm still facing problems with 4G and the camera, because I'm still not on N Firmware & modem :angel:
Has something changed about this process?
Do I still need to go back to stock or is there an easier way now?
Huge thanks in advance
Click to expand...
Click to collapse
Don't know about your device type but yes, there are fastboot images as well as detailed guides available at guides section like this one http://forum.xda-developers.com/moto-g4-plus/how-to/android-7-0-install-nougat-official-t3531612

strongst said:
Don't know about your device type but yes, there are fastboot images as well as detailed guides available at guides section like this one http://forum.xda-developers.com/moto-g4-plus/how-to/android-7-0-install-nougat-official-t3531612
Click to expand...
Click to collapse
Oh, totally forgot to mention it.
According to the sticker on the back of it:
Model: XT1622
Type: M1B89
bought on Amazon.de, they sold it as an "Lenovo Moto G4 Smartphone (14 cm (5,5 Zoll) 16GB, Android) schwarz"

Das_OSi said:
Oh, totally forgot to mention it.
According to the sticker on the back of it:
Model: XT1622
Type: M1B89
bought on Amazon.de, they sold it as an "Lenovo Moto G4 Smartphone (14 cm (5,5 Zoll) 16GB, Android) schwarz"
Click to expand...
Click to collapse
You don't have a g4 plus. So AFAIK there's no fastboot image out for xt1622 yet. And this forum is for g4 plus, not g4. You should read and ask in g4 forum, but I can't find images there.

Das_OSi said:
Oh, totally forgot to mention it.
According to the sticker on the back of it:
Model: XT1622
Type: M1B89
bought on Amazon.de, they sold it as an "Lenovo Moto G4 Smartphone (14 cm (5,5 Zoll) 16GB, Android) schwarz"
Click to expand...
Click to collapse
Provided your device isn't the one with Amazon adverts on, the fast boot ROM linked by strongst appears to flash onto XT1622 devices. Bear in mind this is a stock ROM and flashing it will revert you back to stock recovery and system. There was a TWRP image of the baseband modem and firmware, though that got taken down as it seemed not to work well for US devices. However, in my opinion, flashing the whole stock ROM should be more stable.

strongst said:
You don't have a g4 plus. So AFAIK there's no fastboot image out for xt1622 yet. And this forum is for g4 plus, not g4. You should read and ask in g4 forum, but I can't find images there.
Click to expand...
Click to collapse
It must be an Plus, because I can only flash "athene" builds via TWRP.
TWRP won't let me flash G4 builds.
echo92 said:
Provided your device isn't the one with Amazon adverts on, the fast boot ROM linked by strongst appears to flash onto XT1622 devices. Bear in mind this is a stock ROM and flashing it will revert you back to stock recovery and system. There was a TWRP image of the baseband modem and firmware, though that got taken down as it seemed not to work well for US devices. However, in my opinion, flashing the whole stock ROM should be more stable.
Click to expand...
Click to collapse
No, there were no Amazon adverts on mine.
This one here:
https://forum.xda-developers.com/moto-g4/development/fxz-athene-twrp-flashable-fastboots-t3562147
?

Das_OSi said:
It must be an Plus, because I can only flash "athene" builds via TWRP.
TWRP won't let me flash G4 builds.
No, there were no Amazon adverts on mine.
This one here:
https://forum.xda-developers.com/moto-g4/development/fxz-athene-twrp-flashable-fastboots-t3562147
?
Click to expand...
Click to collapse
Yeah, that was the thread I was referring to. The 93-14 fastboot ROM has been reported to flash on xt1622 devices okay https://forum.xda-developers.com/mo...1640-43-athene-npj25-93-t3549369/post70843323 this will also give you the same build as has been deployed over the EU and globally. Still though, have a read of the thread before flashing.

echo92 said:
Yeah, that was the thread I was referring to. The 93-14 fastboot ROM has been reported to flash on xt1622 devices okay https://forum.xda-developers.com/mo...1640-43-athene-npj25-93-t3549369/post70843323 this will also give you the same build as has been deployed over the EU and globally. Still though, have a read of the thread before flashing.
Click to expand...
Click to collapse
Thanks a lot, I would probably never have found this thread without you.
Just doing an "fastboot flash modem NON-HLOS.bin" won't be enough, right? :fingers-crossed:

I can confirm the method mentioned by echo92 above. Works perfect on my XT1622. If you have sucessfully installed the 93-14 Stock N build, you could upgrade to the latest update 93-14-4, provided in this thread:
https://forum.xda-developers.com/mo...ial-moto-g4-plus-ota-update-build-t3584982...
1.page....thanks to lexie90

Worked like a charm
Now I'm on
[ROM][OFFICIAL][7.1.1][XT16xx]LineageOS 14.1[athene][Moto G4/Moto G4 Plus]
and handover from WiFi to LTE finally works, also my camera is working again
Thanks a lot guys :victory:

TWRP doesn't flash stock. You need to do it in fastboot mode.
To find out what device you have, while in fastboot, type this in cmd window:
Code:
fastboot getvar all

SoNic67 said:
TWRP doesn't flash stock. You need to do it in fastboot mode.
To find out what device you have, while in fastboot, type this in cmd window:
Code:
fastboot getvar all
Click to expand...
Click to collapse
No,
with the help of you guys I managed to flash the latest stock (using fastboot), and now I'm back on CM again :highfive: