[Q] Unbrick Moto Defy - Defy Q&A, Help & Troubleshooting

I was using Moto Defy on Cyanogen Stable 4.1.2. However, I did some mistake of wiping off system, data & other stuff yesterday. Now the phone was stuck at the "Google" CM logo.
I flashed it using .sbf from http://forum.xda-developers.com/showthread.php?t=978792
However, now the phone boots but it says, connecting to server(which goes on & on). I cannot view the menu or anything. How can I revive the phone back?
If you need further details, let me know!

Related

[Q] Cyanogen Mod - Help - Zte Blade stuck at Green Andoid Image at startup-Won't Boot

Hi, first time modding and I've come up with a problem.
Baisically what's wrong now:
Phone is stuck at large green android logo when I turn on the phone.
Can't boot into Cyanogen
Can't get Clockworkmod to open
Phone only turns off with a battery pull
How I got the phone to this point:
Followed the instructions at wiki.cyanogen
(Backed up with titanium backup pro)
The first time I installed the mod I got stuck in a boot loop. But I fixed this by deleting data and cache in Clockworkmod and going through the steps again.
The phone and it's new mod seemed to work. I installed the google apps.zip, via CLockwork, still fine.
Then I tried to reinstall apps from Titainium Backup.
Some of these went well, but I started to get 'com.google.process.gapps' stopped working force close notifications.
I rebooted to see if that would make them stop.
But I got stuck in a boot loop of the Cyanogen animated logo, where it would boot, show me the unlock screen, I would unlock it, get another 'com.google.process.gapps' message and the phone would then freeze and reboot. The sequence then continued.
I tried battery pulling and tried to boot into Clockwork by holding down Menu Up and Power. But not after a while it just shows the green android logo. HELP.
I didn't read all!
So...
this problem is easy fix!
I spent 3 Hours with my blade to get my Blade II to work!
you have same problem which some other has posted somewhere here...
search on google or on Modaco: ZTE Blade TPT GEN1 or GEN2...
follow instructions!
now Blade II needs to work!
http://android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/

[Q] Droid R2D2 Stuck on Moto Logo

Currently having an issue with my Droid R2D2 (rooted), I was installing a new battery mod for my phone, restarted the status bar and all worked out fine. I went to do a reboot to make sure it all worked out and BOOM, phone became stuck at Moto Logo for the past 20 mins when I tried to restart it.
I can't seem to get Bootloader to load up even with the phone plugged into the computer itself, but it will go into recovery mode after holding the X button on keyboard, but search key wont bring up any luck either.
I can't seem to find my back-ups either before I installed the battery logo, ROM Manager would back-up my stock R2D2 ROM but it wouldn't appear on the list of possible recoveries before the phone went into deep sleep.
Only thing that I've found to fix this is to just SBF_Flash back to stock and start over.

[Q] Defy stuck at rolling logo, darkening and turn off

I'm new to android, my friend gave me this defy with android 2.3.6. When i was using it, it suddenly turned off. I removed and inserted battery to reset but it was still rolling the logo M, and after that the screen darken and turn off. I read many topics, I tried to go to stock recovery by holding volume - and power button but it stuck at M logo with no animation. I can still access the bootloader and connect to rsd.
Anybody helps me pls !
anybody helps my please
pavolusa said:
I'm new to android, my friend gave me this defy with android 2.3.6. When i was using it, it suddenly turned off. I removed and inserted battery to reset but it was still rolling the logo M, and after that the screen darken and turn off. I read many topics, I tried to go to stock recovery by holding volume - and power button but it stuck at M logo with no animation. I can still access the bootloader and connect to rsd.
Anybody helps me pls !
Click to expand...
Click to collapse
Then try doing a SBF flash if you can't access stock recovery too(seems strange) ! Now try again and do a data wipe from stock recovery(After SBF flash) next if it do not work go to service center!

[Q] ZTE Blade caught in boot loop - help?

Got a ZTE Blade here which is playing up. I can get into CWM so that's a good start, but no matter what ROM I install it just gets stuck on boot, constantly looping the green Android robot logo.
I'm trying to help out a friend with this so I'm not familiar with the Blade at all. It originally had an old version of Cyanogenmod but that was incredibly buggy so needed updating. After wiping it though I've not been able to get it back to working order.
Any ideas what is up with this thing?
When u boot into cwm, did u wipe data and cache before flashing the rom?

[Q] Brick Defy Red lens please help.

Hi Guys sorry for mi english.
I have this defy how was looping at de cyanogen mod logo then after reading some post I wipe data and re flash everythig ( cm10,kernel, gapps and battery fix) , after that I rebooted and its now stuck at the GOOGLE logo.
I don get the blue or green light to press up and go to customer recovery also can{t get that boot loader I have seen in some thread by presin volume up and power buutton.
My phone is just stuck at the GOOGLE logo. Any help will be thanked! =)
Hi
I managed to getto boatloder, tried to install the stock sbf but it fails at RSD lite, I have read tha a wipe is need by inserting battery and holding down vol down to get to motorola recovery.
I tried that but after the holding volume down and insterting the battery i get the same bootloader screen.
Is there another wipe to wipe the data or im doing something wrong?
please help me =(
AW: [Q] Brick Defy Red lens please help.
rsd detects your phone? what does it say when you try to load the sbf?
lateraluis said:
Hi Guys sorry for mi english.
I have this defy how was looping at de cyanogen mod logo then after reading some post I wipe data and re flash everythig ( cm10,kernel, gapps and battery fix) , after that I rebooted and its now stuck at the GOOGLE logo.
I don get the blue or green light to press up and go to customer recovery also can{t get that boot loader I have seen in some thread by presin volume up and power buutton.
My phone is just stuck at the GOOGLE logo. Any help will be thanked! =)
Click to expand...
Click to collapse
If RSD recognizes your phone, you are probably safe. Try flashing different SBFs.
Sometimes, though, your flash memory is gone, so your phone will be bricked.

Categories

Resources