Got a ZTE Blade here which is playing up. I can get into CWM so that's a good start, but no matter what ROM I install it just gets stuck on boot, constantly looping the green Android robot logo.
I'm trying to help out a friend with this so I'm not familiar with the Blade at all. It originally had an old version of Cyanogenmod but that was incredibly buggy so needed updating. After wiping it though I've not been able to get it back to working order.
Any ideas what is up with this thing?
When u boot into cwm, did u wipe data and cache before flashing the rom?
Related
Hi, first time modding and I've come up with a problem.
Baisically what's wrong now:
Phone is stuck at large green android logo when I turn on the phone.
Can't boot into Cyanogen
Can't get Clockworkmod to open
Phone only turns off with a battery pull
How I got the phone to this point:
Followed the instructions at wiki.cyanogen
(Backed up with titanium backup pro)
The first time I installed the mod I got stuck in a boot loop. But I fixed this by deleting data and cache in Clockworkmod and going through the steps again.
The phone and it's new mod seemed to work. I installed the google apps.zip, via CLockwork, still fine.
Then I tried to reinstall apps from Titainium Backup.
Some of these went well, but I started to get 'com.google.process.gapps' stopped working force close notifications.
I rebooted to see if that would make them stop.
But I got stuck in a boot loop of the Cyanogen animated logo, where it would boot, show me the unlock screen, I would unlock it, get another 'com.google.process.gapps' message and the phone would then freeze and reboot. The sequence then continued.
I tried battery pulling and tried to boot into Clockwork by holding down Menu Up and Power. But not after a while it just shows the green android logo. HELP.
I didn't read all!
So...
this problem is easy fix!
I spent 3 Hours with my blade to get my Blade II to work!
you have same problem which some other has posted somewhere here...
search on google or on Modaco: ZTE Blade TPT GEN1 or GEN2...
follow instructions!
now Blade II needs to work!
http://android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
Hi,
Boot looping problem with my m2.
Was flashed
20111012-0056-Nightly-v1.0
(previously was on MIUI 1.10.8, before that was the MS2Ginger rc).
With that version of CM7, the phone will drop call while the battery low dialog pops up sometime. Maybe the cpu vel is too low.
Also when last time this happened, the phone shutdown itself and now it's boot looping.
Some time it can boot over the bootmenu (can see the blue/green led), but after that stuck at the boot logo or boot into black screen.
few time it can boot into Android.
Most of the time it can't even boot over bootmenu, just stuck at the boot logo.
Reflashed and wiped everything and it doesn't help.
Reflashed MIUI on to it and same problem.
Tried to get the logcat running but it only says waiting for device,
though I plugged the phone but got nothing on the command line.
//===update
using RSD Lite to flash the phone will fail because
"error getting subscriber unit"
or "error erasing subscriber unit"
Any suggestion?
Regards,
skygunner said:
Hi,
Boot looping problem with my m2.
Was flashed
20111012-0056-Nightly-v1.0
(previously was on MIUI 1.10.8, before that was the MS2Ginger rc).
With that version of CM7, the phone will drop call while the battery low dialog pops up sometime. Maybe the cpu vel is too low.
Also when last time this happened, the phone shutdown itself and now it's boot looping.
Some time it can boot over the bootmenu (can see the blue/green led), but after that stuck at the boot logo or boot into black screen.
few time it can boot into Android.
Most of the time it can't even boot over bootmenu, just stuck at the boot logo.
Reflashed and wiped everything and it doesn't help.
Reflashed MIUI on to it and same problem.
Tried to get the logcat running but it only says waiting for device,
though I plugged the phone but got nothing on the command line.
Any suggestion?
Regards,
Click to expand...
Click to collapse
Have you tried flashing the stock .sbf via RSD Lite?
Yes was trying that. But the falshing doesn't seem to be completed sucessful.
Stuck at sw update in progress...
RSDlite 4.9 shows error getting/erasing subscriber unit?
It seems like the phone has been disconnected before the flash completes
See this thread and particulary this :
EVEALEX62 said:
It's good for me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Yououououououououououou !!!!!!!!!!
I don't know if all this is nécessary but it's what I have doing .....
1rst, I have full charge my battery !
I have do this (all step 1 to 11 because "boot up the phone manually" ) with the sbf 2.2.2 officiel but modify whith this post :
The first time don't work but the second time it's good !!!!
So BIG thanks to all people have help (pat972, Atomos33,Emacore,dangpzanco,will5, motodoido) , but especially to r2beta0 et Mikevhl
Click to expand...
Click to collapse
I rooted my phone awhile back and everything has been good so far until i tried to install a google wallet apk that has left my phone unable to boot. I know my phone isn't bricked as it charges and still boots but only up to the att logo and then its frozen there. Im kinda a noob when it comes to android as this is my first one. Is there anything I can do?
I tried restoring it back to factory data and it still doesn't boot past the ATT Logo.
NVM: Just had to wipe cache partition and it booted right up.
[SOLVED] I managed to get into custom recovery and restore. Not sure why switching to ART gave me this problem in the first place. Thread can be closed/deleted.
___________________________________________________________________________________________________________
I need help with what to do...
I have a VS980 LG G2 (Verizon) running TWRP 2.8.1.1 and CloudyG3 2.0. I switched from Davlik to ART. I know first boot is supposed to take 10-20 minutes and depends on how many apps you have installed (I have a decent number, but I don't think it's overboard), but I'm well beyond 20 minutes now. It's sitting at the LG logo screen (not even the "Android is upgrading apps" screen or whatever I was expecting) and feels warm like it's doing something. I can't use the Volume - and Power button combo to get into recovery, only to hard reboot the phone. The blue/green LED is blinking slowly like a normal boot would.
How can I get into recovery? Once I do, I'll know how to restore, but is there a way to connect it to my Windows laptop and sideload a ROM so I can reboot into recovery and restore? Any help would be appreciated. I'm good at following tutorials to do stuff, but not well versed in adb/fastboot stuff where I would know what to type in.
I was using Moto Defy on Cyanogen Stable 4.1.2. However, I did some mistake of wiping off system, data & other stuff yesterday. Now the phone was stuck at the "Google" CM logo.
I flashed it using .sbf from http://forum.xda-developers.com/showthread.php?t=978792
However, now the phone boots but it says, connecting to server(which goes on & on). I cannot view the menu or anything. How can I revive the phone back?
If you need further details, let me know!