When I try to up the stock firmware for my E7 3gb for the second time I got the following problem:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I try to do everything, even re-install windows but no luck. I also can't install PdaNet. It's say "UpdateDriverForPlugAndPlayDevices err=2"
Someone got these problem? Please respond. Thanks
As "man007cgr" said try to downgrade to 4.2.2 via CWM he says 4.4 cant see COM ports.
you can find it here: needrom.com
Thanks. I give it a try right now
You are welcome
CWM posted on needrom is in chinese
but you can find english one here in forum.
Let me know if it works...
IT'S WORK. THANKS, YOU SAVED MY LIFE :crying:
Yeah and I just flashed the stock indian firmware via GNQC :good:
You are welcome!
Good you manage it! :good:
Write diag Interface Then click OK
Hi, what does it do?
Is it a fix for COM port error too?
Hi, can you please post the code You used to enter developrr options? Thank You!
Muresan01 said:
Hi, can you please post the code You used to enter developrr options? Thank You!
Click to expand...
Click to collapse
*#*#452789#*#*
Just a warning!
I just want to warn you about the 4.4.2 update of the india gionee e7 rom. It seems a little suspicious. I personally stay away from it as it charged 9 euros from my sim card without any reason. And not only that, but also it closes the COM ports to prevent you from flashing another firmware.
Thanks for letting us know!
You were charged for data traffic or instantly cashed you?
He is charged because this rom has 2 programe that sends automatic messages and need to Be deleted.
Salestatistic and
Salestrack
You need Root for that.
Also You can shut them down by modify build.prop lines:
ro.gn.oversea.salestrack.gi=yes
ro.gn.oversea.salestrack.gi=no
You should do both for safety.
The messages are sent to
00918527214747
00919880938662
Also,for fun,You can change those numbers with any so the messages will Be sent to that number.
The messages contains phone imei,operator code and other things about phone.
The messages are being sent every time You power on your phone and yes,IT charges your phone bill.
Sorry for my bad english.
Good to know, thanks!
So installing the 4.4.2 ROM without sim card will be safe.
You just remove that spyware and put the sim back...
muharremaksoy said:
Write diag Interface Then click OK
Click to expand...
Click to collapse
What about this?.. anybody knows something about that?
Could be this a fix for the COM port error on 4.4 kitkat?
I'm on contact with Gionee India.
I talked with them to communicate the problem of SMS and this is what they replied:
"Hi, in this software we have introduced new activation logic.
As per new logic phone will continuously send activation message until
phone will not receive reply message from server.
Note our Server never reply on ISD number that why its happing.
Pls ask user to send a message which contain below word from another phone
to his Gionee phone.
1. Gionee
2. Toll free number 18002081166"
Course is a toll free number, but from Spain, where I am, believe me not. Someone living in India, dare to try?
have you fixed your issue mate?
thada2607 said:
When I try to up the stock firmware for my E7 3gb for the second time I got the following problem:
I try to do everything, even re-install windows but no luck. I also can't install PdaNet. It's say "UpdateDriverForPlugAndPlayDevices err=2"
Someone got these problem? Please respond. Thanks
Click to expand...
Click to collapse
I'm having same problem..... Plz help me ....
Shakil Hossain said:
I'm having same problem..... Plz help me ....
Click to expand...
Click to collapse
Downgrade to 4.2.2 it's work for me
Hi.
Can anyone provide a working guide to downgrade the phone from kitkat to jelly bean? I'm afraid to brick my phone...
Related
Hello All, As we all were waiting for flashtool to be available along with the drivers. Elife website has got the flashtool,drivers called Brush Pack.
Here's the download Link : http://pan.baidu.com/share/link?shareid=1492684293&uk=4131191850
To download click the white button next to the blue button and then enter the captcha and ur download will begin..if u only want to flashtool and drivers just go to the E7 folder and select the file to download.
For downloading the "ROM" 1.8GB file u need to click on the download >> a box will open >> click on the button right to the blue button >> enter captcha >> press blue button >>Download Starts
PASSWORD : VT1A
Here's a step by step method for people having slow internet cuz google translate fails on slower internet
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Source :http://www.elife.com/thread-22957-1-7.html Please go through this link if u want to learn more
Thanks for the post bro, but what is the encryption password for the download link? I got this page when clicked on above download link -
EDIT : Nevermind, went through the source link at bottom and got the password
There is English version of flashtool available. here..
http://forum.xda-developers.com/showthread.php?p=51788389
all credit goes to original poster
dhirajranger said:
There is English version of flashtool available. here..
http://forum.xda-developers.com/showthread.php?p=51788389
all credit goes to original poster
Click to expand...
Click to collapse
Bro this is also the english version...he just downloaded from there and posted in that thread..when i was busy making the thread..all credits goes to elife.com and ppl there........we are just providing the link... at the bottom of my post
GTARaja said:
Bro this is also the english version...he just downloaded from there and posted in that thread..when i was busy making the thread..all credits goes to elife.com and ppl there........we are just providing the link... at the bottom of my post
Click to expand...
Click to collapse
sorry if i offended you in any way. i assumed it to be Chinese as when i downloaded about a month ago from elife website it was in Chinese. also WIRE BRUSH is crude translation of a Chinese word which means "firmware update". so I thought this is same Chinese version. anyways thanks !
dhirajranger said:
sorry if i offended you in any way. i assumed it to be Chinese as when i downloaded about a month ago from elife website it was in Chinese. also WIRE BRUSH is crude translation of a Chinese word which means "firmware update". so I thought this is same Chinese version. anyways thanks !
Click to expand...
Click to collapse
chill bro just wanted to tell u about the real thing...
Hey guys, first of all, thanks for your support and interest in investigating and improving the performance of our great phone!
And now the question:
Does anyone know how to use this tool?
Because I've had, but I do not recognize the phone, tells me I can not find the port to begin flashing.
* I suppose you have to start in fastboot mode or not like?
Any tutorial?
Greetings!
hackvier1 said:
Hey guys, first of all, thanks for your support and interest in investigating and improving the performance of our great phone!
And now the question:
Does anyone know how to use this tool?
Because I've had, but I do not recognize the phone, tells me I can not find the port to begin flashing.
* I suppose you have to start in fastboot mode or not like?
Any tutorial?
Greetings!
Click to expand...
Click to collapse
bro there is a video in the link which i provided at the end of the thread check it out
http://www.elife.com/thread-22957-1-7.html
The video is for another version of flashtools, he said in the same post, in fact the tools are not the same.
Desde mi Gionee E7, saludos!!!
hackvier1 said:
The video is for another version of flashtools, he said in the same post, in fact the tools are not the same.
Desde mi Gionee E7, saludos!!!
Click to expand...
Click to collapse
sorry bro..then i cant help cuz ive not yet downloaded and tried..once i ve tried ill post a guide
I find this ROM from here: http://bbs.neonado.com/viewtopic.php?f=13&t=273&p=501&sid=5e8ff46b7404937ec402237ef4c46360#p501 and just want to share it with more people.
Model: HONOR 6 (H60-L02)
Size: 714MB
Android version: Android 4.4.2
Release date: 9-15-2014
Flash way: SD-card
ROOT: have root
Download Link 1: http://pan.baidu.com/s/1kTuqRWj
Download Link 2: http://pan.baidu.com/s/1jGDpOxw
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is official or beta ?
layoon said:
I'm looking for it. Thanks for your sharing.
Click to expand...
Click to collapse
I'm downloading it now...
Thanks.
Simona Simmy said:
this is official or beta ?
Click to expand...
Click to collapse
It's beta.
hi, after update 3.0 i got mobile network, cannot connect lte or 3g, before update i can use lte very stable and fast, can help me ? Thanks
hydark said:
hi, after update 3.0 i got mobile network, cannot connect lte or 3g, before update i can use lte very stable and fast, can help me ? Thanks
Click to expand...
Click to collapse
The network can be chosen. May you choose only 2G. You just need change it in Settings》》》network>>>More>>>mobile netwoeks>>preferred network type>>>auto 4g/3g/2g
The download is impossible, it stops at 26%. Please, can anyone upload the rom somewhere?
mirror
What Is the procedure to update.
I've already download. Now What should I do?
I've already update to b118sp02, but the rom comes with the dload folder to put on microsd card...
this one doesn't come with the dload folder.
Follow this guide
VirusPlus said:
Follow this guide
Click to expand...
Click to collapse
not working AT ALL
It seems that this rom is flashable through CWM.
Is anyone flashed that ROM and works?
apofisao said:
The download is impossible, it stops at 26%. Please, can anyone upload the rom somewhere?
Click to expand...
Click to collapse
Try download link 2
ajulio said:
What Is the procedure to update.
I've already download. Now What should I do?
I've already update to b118sp02, but the rom comes with the dload folder to put on microsd card...
this one doesn't come with the dload folder.
Click to expand...
Click to collapse
This rom is flashable through CWM.
forgeting said:
Try download link 2
Click to expand...
Click to collapse
Thanks for the tip. I downloaded the rom from the link of @VirusPlus
forgeting said:
This rom is flashable through CWM.
Click to expand...
Click to collapse
I’ve tried to update with the custom cwm and it gave me as error, than the mobile doesn’t start anymore….
So I’ve copy the b117 rom dload folder to the sdcard and with the 3 buttons update I’ve manage to restart the phone.
Than I’ve try to do the same but for the b118 rom but the update hang at the end.
What can I do?
edit: I've manage a way to start the phone... what scare that I had...
Just to mention that you need stock CWM (don't use custom cwm) to flash this.
Managed to flash hwH60-L02_EmotionUI3.0_B60.zip over official 607 via cwm
but lost ota, local ,usb update
Downloading...
I am downloading this Version of EMUI at the moment.... And Thanks for the mirror! It´s much faster
Official EMUI 3.0 (B608).
mirror
mirror
mirror
Help
Hi @ all!
This update is already available via OTA update for H60-L02 (everything appears in chinese signs but after updating it you can establish your language, it is multilanguage)
My question is the following:
Allthough the OTA update is multilanguage, there is still one situation where chinese signs are displayed.
This is when I save a number with international prefix (for example +34).
If I save the number without international prefix, the location is displayed in a "normal" way.
Does somebody know why and how I can change it? Please take a look at the attached pictures.
Thanks in advance folks!
Hello:
I've posted a thread in my model of phone, to enable Miracast featura. As you probably know, Miracast feature is used in almost all phones since Android 4.2.x
Heres is the link to thread http://forum.xda-developers.com/zte-blade/general/miracast-zte-blade-l3-t3203223
I also quote the actiones I've been taking in Stock Rom rooted with KingRoot
Hi, this is my first post. I'm a self-experienced using Android. For year I had no problems with my devices. I had a Motorola G 1st generation who worked fine, but I waste it. Now, I bought ZTE Blade L3. Such as Moto G, Miracast feature is not enable (at least in my stock rom).
I want to know if this device is compatible with that technology (read that works in every phone since 4.2.x).
This phone has Android KK 4.4.4.
Tried to first connect trough WiFi Direct a Miracast Dongle (easycast), but the phone doesn't connect. Then, I tried whith screen cast option, and the same. Finally, I looked forums how to unlock modifying bootloader.ini, just as I had to do Moto G. I added the lines with BuildProp editor after rooting with Kingo Root:
persist.sys.wfd.virtual=0
persis.debug.wfd.enable=1
AAAAAND nothing happens
I need some help, first to know compatibility (wifi drect certification page is down, unfortunately), if there is a ROM that solve this problem (CM maybe?) and if there are other lines that I must add to buildprop.
Thank you very much for your asnwers, and sorry for the bad english (I'm from Chile).
If you need any further information, please ask!!! :laugh:
UPDATE: use #MirrorEnabeler and the message is "Your Rom is lacking the audio_submix file. You must contact your device mantainer and ask them NICELY no imlement it. Please refer to the red part of the original post on XDA-Developers" This going to take long time, so decided to install stock ROM from other country using SP Flash tool, to see if it has the same problem.
UPDATE 2: Stock ROM from other country, same problem. Rooted the phone to make changes using KingRoot. Followed instructions from this thread http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193 The thread was closed, and will create another thread for dongles (no chromecast)
It says, or those STILL having issues,
Check /system/lib/hw directory for the file "audio.r_submix.default.so".
If it doesn't exist, ask your device maintainer to add audio.r_submix.default to
the product_packages in the device.mk file. (You may not know what it means, but they will.)
So, Asked my mobile company to do the changes, they said "the manufacter must". Contacted ZTE to do what is being said, and ther is still no answer.
Will ask in thread posted after, to see if they can help me. Please let me know if somebody can run Miracasr in his Blade (also did't found another ROM that's not a Stock one)
Click to expand...
Click to collapse
I´ve trying to contact manufacter to enable the feature, but It is probable that the stock ROM (from my country) is blocking the feature, just for buying an more expensive phone.
There is NO custom Rom yet stable for my rom (MTK device)
PLEASE HELP ME!!!
Regards and SFMBE.
Got the answer from ZTE.
Said this: " am sorry to inform you that you cannot have miracast individually custom-made to use on this device hence there is no authority of Miracast.
Should there be further assistance, please do not hesitate to contact us. "
So, they cannot create the file that I asked. So, my mobile company and the manufacter said "no way dude".
CAN SOMEBODY TELL ME IF IN A CUSTOM ROM IS A WAY TO CREATE audio.r_submix.default FILE!"????
SOMEBODY CAN HELP ME PLEASE????
REGARDS
Hello
I have problems with Easycast ota and meizu mx3. After connection is just dlna option. I want to have mirror screen.
can anybody help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
perfect
perfect style good working
Hello Guys! It's Been More Than A Week Now, That I Am Unable To Solve This ; "No Mobile Network Available!" Issue On My 11-Month Old Rooted Lenovo A6000. What All Things I Tried To Resolve This Issue, But, DIN'T WORK:
1. Checked The Stock ROM
2. Flashed Mokee ROM.
3. Settings->Sim Cards->Data Connection(ON).
4. Settings->Sim Cards->Sim1/2->Network Operators->Choose Automatically
5. Settings->Sim Cards->Sim1/2->Network Operators->Choose Manually
6. Removed Google Account And Tried (As Posted As A Fix By Some Other Forum)
7. Used 3 SIM Cards (Which Are Working On Other Phones)
8. Dialed *#*#4636#*#* And Tried Changing The Phone Network Modes Too.
NOTHING IS HELPING!
Please! You Can Help Me. Can You?:crying:
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jekinv said:
Hello Guys! It's Been More Than A Week Now, That I Am Unable To Solve This ; "No Mobile Network Available!" Issue On My 11-Month Old Rooted Lenovo A6000. What All Things I Tried To Resolve This Issue, But, DIN'T WORK:
1. Checked The Stock ROM
2. Flashed Mokee ROM.
3. Settings->Sim Cards->Data Connection(ON).
4. Settings->Sim Cards->Sim1/2->Network Operators->Choose Automatically
5. Settings->Sim Cards->Sim1/2->Network Operators->Choose Manually
6. Removed Google Account And Tried (As Posted As A Fix By Some Other Forum)
7. Used 3 SIM Cards (Which Are Working On Other Phones)
NOTHING IS HELPING!
Please! You Can Help Me. Can You?:crying:
Screenshots :
Click to expand...
Click to collapse
Check your IMEI no. by dialling *#06#
If it null, then follow this thread
It Ain't Null! It Has Proper IMEIs
sasukay said:
Check your IMEI no. by dialling *#06#
If it null, then follow this thread
Click to expand...
Click to collapse
It Has 2 IMEIs. So, That's Not The Issue I Reckon. Thanks For The Reply Though! Any Other Remedy?
jekinv said:
It Has 2 IMEIs. So, That's Not The Issue I Reckon. Thanks For The Reply Though! Any Other Remedy?
Click to expand...
Click to collapse
How did this happen..?
I Don't Know
sasukay said:
How did this happen..?
Click to expand...
Click to collapse
I Don't Know! It Happened All Of A Sudden! I'm Worried. Coz, My Warranty Is Void Too.
Please Help!!
jekinv said:
I Don't Know! It Happened All Of A Sudden! I'm Worried. Coz, My Warranty Is Void Too.
Please Help!!
Click to expand...
Click to collapse
Nothing happens on its own. You must have flashed something wrong. Or you could've dropped your phone.
BTW, if you flash stock ROM with stock recovery, they are not gonna find it. And you can easily get your phone repaired.
STOCK ROM
sasukay said:
Nothing happens on its own. You must have flashed something wrong. Or you could've dropped your phone.
BTW, if you flash stock ROM with stock recovery, they are not gonna find it. And you can easily get your phone repaired.
Click to expand...
Click to collapse
How Do I Get Back To Stock ROM? Can You Link Me?
I Got The Display Changed!
sasukay said:
Nothing happens on its own. You must have flashed something wrong. Or you could've dropped your phone.
BTW, if you flash stock ROM with stock recovery, they are not gonna find it. And you can easily get your phone repaired.
Click to expand...
Click to collapse
The Phone's Display Was Broken! And So, I Got It Changed! Now, The Network Is Not Coming!
Can That Be The Reason?
Changed The Display
sasukay said:
How did this happen..?
Click to expand...
Click to collapse
The Phone's Display Was Broken! And So, I Got It Changed! Now, The Network Is Not Coming!
Can That Be The Reason?
jekinv said:
The Phone's Display Was Broken! And So, I Got It Changed! Now, The Network Is Not Coming!
Can That Be The Reason?
Click to expand...
Click to collapse
Definitely, the guy who changed it did something wrong. I don't see any other reason for this.
Here's the link for stock Lp
Stock Won't Favor Right?
sasukay said:
Definitely, the guy who changed it did something wrong. I don't see any other reason for this.
Here's the link for stock Lp
Click to expand...
Click to collapse
Since, The Phone Is Opened, i.e. Physically Opened. Will The Stock ROM Installation Help?
Will The Service Center Guys Accept?
jekinv said:
Since, The Phone Is Opened, i.e. Physically Opened. Will The Stock ROM Installation Help?
Will The Service Center Guys Accept?
Click to expand...
Click to collapse
Well, they would atleast give it a look. Maybe, find out that somebody has opened it earlier. But, give it a try. And btw, why don't you go to the guy who changed your display. Tell him, its his fault. Maybe its just a loose wire and he could fix it.
And download from here instead, if you haven't started yet.
Same issue faced
Hi,
Can you let me know if the issue is fixed and how? I am also facing same issue after screen change.
Guys i am creating this thread after searching everywhere but not getting solution about this issue which i am having with Note 4. By attaching pictures i may not be explain the problem so i uploaded it on youtube. Please devs help me as I have not been able to make it work after trying so many things.
Kindly check the video of issue which i am facing and guide me to resolve it please.
https://www.youtube.com/watch?v=fasDDzpffKs&feature=youtu.be
I check if IMEI is corrupt or something using PHONE INFO and there it showed the imei and i also check it on the back of phone and it matched.
Snapshots using phone info
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, i am from Indonesia..
I think i have same problem with you.. My Note 4 N910G does not registered by any network providers since i've installed Stock ROM from INU. Last time till now i can't using SIM CARD into it and i'm using WiFi Hotspot, cause if i attaching SIM CARD, my phone will suddenly dead when looking for signals.
I hopes someone can explains about my problem, before i have to brings my phone to service centre.
Thx
jim50361 said:
Hi, i am from Indonesia..
I think i have same problem with you.. My Note 4 N910G does not registered by any network providers since i've installed Stock ROM from INU. Last time till now i can't using SIM CARD into it and i'm using WiFi Hotspot, cause if i attaching SIM CARD, my phone will suddenly dead when looking for signals.
I hopes someone can explains about my problem, before i have to brings my phone to service centre.
Thx
Click to expand...
Click to collapse
Its same here bro. Since phone is not registering to any SIM i have been just using as Tablet by connecting to WIFI only..
Devs kindly help. Suggest something to try regarding this problem please.
Some help plz
omarrph said:
Some help plz
Click to expand...
Click to collapse
I think that i will try to fixing from software first, maybe with flashing its modem or baseband file before i decides to fixing hardware sections ( about PA Chip).
Cause its happened after i've upgrading my phone with new updates firmware fom Sam Mobile.
But i hopes someone in this forum can gives a solution to solves this problem.
And well.. For while, we just satisfying with a new model, Samsung GN 4 ( wifi only) edition :laugh:
jim50361 said:
I think that i will try to fixing from software first, maybe with flashing its modem or baseband file before i decides to fixing hardware sections ( about PA Chip).
Cause its happened after i've upgrading my phone with new updates firmware fom Sam Mobile.
But i hopes someone in this forum can gives a solution to solves this problem.
And well.. For while, we just satisfying with a new model, Samsung GN 4 ( wifi only) edition :laugh:
Click to expand...
Click to collapse
Yeah in tried to fix if it was due to software, i tried to install official firmware Lollipop but it didnt booted. then i tried Marshmallow using Odin, Odin passed but didnt booted.. it was having continuous bootloops so again i reverted back to N910GDTU1ANK3_ODD1ANK3_India_v4.4.4_Repair_Firmware .. Phone is ON but with same issue.. Wired thing is that i am only been able to Install Philz touch recovery but anyother custom recovery like n910g-cwm-recovery-6.0.5.1(1101) or twrp-3.1.1-0-trlte.img are not booting into recovery...
Now as i am back to official 4.4.4. i tried to check using dialer code *#0011# ie of service mode. i am posting the image kindly tell me Guys if anything is wrong or something is preventing it from getting registered to network
when i am going to setting of my phone-->more network-->Mobile networks-->Network operators--> ( i can clearly see the network of my sim card over there)
but when i am trying to select it after sometime of registering on Ncell it says Unable to Connect
Guys please help..