Database Users

HELP!!!!!!!Flash ME2 fail lose wifi

Recently I flash ME2 with Odin 3.07 and it failed after modem.bin showed up. I have tried to re-flash for many times but still failed. Now I cant't turn my wifi on anymore. I have I9505 Virgin Mobile Version. Please need help!!!!!!

I have same problem on tmobile version

masonman153 said:
I have same problem on tmobile version
Click to expand...
Click to collapse
Is your phone a locked version or unlocked version. I don't know is this is a matter.

Common problem with ME2
All you have to do is follow these instructions:
1) Flash ME2 once
2) go into the phone > turn WIFI and LTE (data) on and off a few times each
3) Flash ME2 again
4) boot into phone - should be fixed
report back if this works

AMDPOWERFIST said:
Common problem with ME2
All you have to do is follow these instructions:
1) Flash ME2 once
2) go into the phone > turn WIFI and LTE (data) on and off a few times each
3) Flash ME2 again
4) boot into phone - should be fixed
report back if this works
Click to expand...
Click to collapse
Thank you, I am trying now. Hope it works.

tsn728 said:
Thank you, I am trying now. Hope it works.
Click to expand...
Click to collapse
there is no logical reason WHY this should work. From a mathematical and logical point of view all of the files should be replaced once its flashed once, however, i was told to do this same process when flashing Omega v3.0 ROM (as it is based off ME2) before you attempt to install the ROM and it worked for me.

AMDPOWERFIST said:
Common problem with ME2
All you have to do is follow these instructions:
1) Flash ME2 once
2) go into the phone > turn WIFI and LTE (data) on and off a few times each
3) Flash ME2 again
4) boot into phone - should be fixed
report back if this works
Click to expand...
Click to collapse
unfortunately, another failure again.... I did everything you told me to do but still..... anyway thank you very much

I just download the vergin mobile version stock rom, hope I can flash my phone back to original rom. I also wonder if there is anyone who had the same problem but solved at the end.

tsn728 said:
unfortunately, another failure again.... I did everything you told me to do but still..... anyway thank you very much
Click to expand...
Click to collapse
Hmmm could be the zip file your using
Download the one from my IDRIVE
https://www.idrive.com/idrive/sh/sh?k=f1b0g5h0n7
Flash twice with the test in between
If that fails, i am unsure.

AMDPOWERFIST said:
Hmmm could be the zip file your using
Download the one from my IDRIVE
https://www.idrive.com/idrive/sh/sh?k=f1b0g5h0n7
Flash twice with the test in between
If that fails, i am unsure.
Click to expand...
Click to collapse
Thanks again, I have download the ME2 file from 6 diffident resource, and I had same problem with them. I flashed the virgin mobile version rom just now, and everything work perfectly again. I guess the problem is my phone is because I purchased it with a contract and it is locked with virgin mobile, , and I think that's the reason why locked phone can not flash ME2, the modem.bin is not supported (just personal guessing). If anyone has the same problem now, I suggest you to download the original carrier stock rom and flash it with Odin, and wait until the proper flash method is found.

[Q] after new baseband no calls

Hey friends,
I really looked everything up, but I could not find anything what helped me with my problem.
I have a Galaxy S4 (GT-i9505) and I wanted to update my modem from MKE to ML6. Because I had some issues with updating it (there still was the MKE at my "Status" after updating to ML6), I tried to double-overwrite it (someone wrote at a forum, that that will solbe the overwriting method). So, I started Odin 3.09 and deleted the "Auto Reboot" option. After the first flashing, I took out the battery and replaced it again. Then I did a secound modem flashing. The result was: There was still the MKE modem AND I cannot call anyone. Everytime I try to call someone and I click the call button, my Galaxy seems to crash. The screen is getting black and I have to shut it down by holding the power button for several secounds. Of course, I already tried out other modems (like to MKE modem again and MJ8), but the problem still exists.
Could anybody please help me!
Thanks,
Robert

Have you tried changing rom + modem? you cannot just randomly try modems with a certain rom as some will work others not.

A|ex said:
Have you tried changing rom + modem? you cannot just randomly try modems with a certain rom as some will work others not.
Click to expand...
Click to collapse
Yes, I tried both the Google Roms 4.4 and 4.3, as well as several other custom roms.

robatkills said:
Hey friends,
I really looked everything up, but I could not find anything what helped me with my problem.
I have a Galaxy S4 (GT-i9505) and I wanted to update my modem from MKE to ML6. Because I had some issues with updating it (there still was the MKE at my "Status" after updating to ML6), I tried to double-overwrite it (someone wrote at a forum, that that will solbe the overwriting method). So, I started Odin 3.09 and deleted the "Auto Reboot" option. After the first flashing, I took out the battery and replaced it again. Then I did a secound modem flashing. The result was: There was still the MKE modem AND I cannot call anyone. Everytime I try to call someone and I click the call button, my Galaxy seems to crash. The screen is getting black and I have to shut it down by holding the power button for several secounds. Of course, I already tried out other modems (like to MKE modem again and MJ8), but the problem still exists.
Could anybody please help me!
Thanks,
Robert
Click to expand...
Click to collapse
it seems that your doing in a wrong way mate Try this , Turn OFF your Phone Manually (Wait about 5 sec) Now press and hold Power+VolumeDown in order to reach Download mode. Open odin select PHONE/CP (Find the modem you download) Connect the cables (check to see if it shows added on top/or should be a blue?Notsure or wait atleast 10 sec) then click start ,once done , remove the cable. and after done rebooting go to you phone setting>More>Device info and check if your baseband version change. have a nice day.

Repulsa said:
it seems that your doing in a wrong way mate Try this , Turn OFF your Phone Manually (Wait about 5 sec) Now press and hold Power+VolumeDown in order to reach Download mode. Open odin select PHONE/CP (Find the modem you download) Connect the cables (check to see if it shows added on top/or should be a blue?Notsure or wait atleast 10 sec) then click start ,once done , remove the cable. and after done rebooting go to you phone setting>More>Device info and check if your baseband version change. have a nice day.
Click to expand...
Click to collapse
Thanks, but that is what I have done at least ten times. I tried Odin3.04 and Odin3.09. I tried MKE, ML6, MJ8. I tried Google Roms 4.4 and 4.3, as well as other custom roms. That's weird!

I have never had any luck with 3.09 i always stick to 3.07, where are you getting your modems rom?

robatkills said:
Thanks, but that is what I have done at least ten times. I tried Odin3.04 and Odin3.09. I tried MKE, ML6, MJ8. I tried Google Roms 4.4 and 4.3, as well as other custom roms. That's weird!
Click to expand...
Click to collapse
Mind giving this a shot?pull your battery out wait a few sec atleast and put it back and then hold and press power+volume down /follow the tutorial on top. Check to see if the modem gonna change .
Sent from Hell ?

A|ex said:
I have never had any luck with 3.09 i always stick to 3.07, where are you getting your modems rom?
Click to expand...
Click to collapse
I got the modems from here: http://forum.xda-developers.com/showthread.php?t=2192025

Repulsa said:
Mind giving this a shot?pull your battery out wait a few sec atleast and put it back and then hold and press power+volume down /follow the tutorial on top. Check to see if the modem gonna change .
Sent from Hell ?
Click to expand...
Click to collapse
Which tutorial do you mean?
btw: sending a sms works, as well as receiving....but no incoming or outgoing calls

Had the same thing yesterday, tried all sorts of modems, with no avail.
Ended up flashing a stock rooted Rom (MGA), flashing a custom recovery and restored a Nandroid. Forgot that flashing a complete stock Rom usually also wipes the internal SD so that was a bit of a hassle.
Now, running a new Rom again, with Wifi, sound and being able to make/receive calls again. Easiest fix also: flash a (compatible) stock Rom :good:

Pfeffernuss said:
Had the same thing yesterday, tried all sorts of modems, with no avail.
Ended up flashing a stock rooted Rom (MGA), flashing a custom recovery and restored a Nandroid. Forgot that flashing a complete stock Rom usually also wipes the internal SD so that was a bit of a hassle.
Now, running a new Rom again, with Wifi, sound and being able to make/receive calls again. Easiest fix also: flash a (compatible) stock Rom :good:
Click to expand...
Click to collapse
Thank you mate. I also found (5 sec before I read your post) this post here: http://forum.xda-developers.com/showpost.php?p=46969768&postcount=2
So, everything works now. The short version for other guys with the problems is:
- flash stock rom via Odin (PDA)
- you can find the stock rom for your country at sammobile.com
- also use the "pit-file" of the linked post (but I don't know, what the pit-file is changing?!)
optional:
- re-root your device again, because now it is not rooted
- new custom rom
Thanks for every help!!!
Robert

Try flashing ML6 Firmware and ML6 Modem (and Wi-Fi fix if needed), had the same issue but after doing so it's fixed.
Occured 1 time again, did a cache wipe didn't occur in 2days now.

Guller said:
Try flashing ML6 Firmware and ML6 Modem (and Wi-Fi fix if needed), had the same issue but after doing so it's fixed.
Occured 1 time again, did a cache wipe didn't occur in 2days now.
Click to expand...
Click to collapse
Except flashing the Wifi Fix was the thing I did to ruin it all. Don't flash a "new" Wifi fix using an old bootloader. You will lose sound/being able to make calls. It's the thing that messed it all up over here.

Pfeffernuss said:
Except flashing the Wifi Fix was the thing I did to ruin it all. Don't flash a "new" Wifi fix using an old bootloader. You will lose sound/being able to make calls. It's the thing that messed it all up over here.
Click to expand...
Click to collapse
I was already on the new bootloader.I've flashed Original FW, Modem + Wi-Fi fix and it fixed my phone. (Possibly also PIT but can't remember)
It can be that our problems were different but produced the same problem.. I'm not a dev nor do I understand everything about Android.
I can be wrong, but that's how I fixed my phone. Just trying to help

Which firmware can I use to update with Odin?

I just updated through Kies to try and solve my audio problem, and it updated my phone to I9505XXUGNG8, it didn't fix the sound issue. I want to completely install a different firmware, which one do I use?

jesus1987 said:
I just updated through Kies to try and solve my audio problem, and it updated my phone to I9505XXUGNG8, it didn't fix the sound issue. I want to completely install a different firmware, which one do I use?
Click to expand...
Click to collapse
Dial *#1234# and tell me what appears. Kies 3 don't udpate good the devices sometimes. You can fix the problem with the sound maybe in some minutes, only reflashing the correct firmware through ODIN :highfive:

Joku1981 said:
Dial *#1234# and tell me what appears. You can fix the problem with the sound maybe in some minutes :highfive:
Click to expand...
Click to collapse
Hi there, I tried out a few firmwares in the meantime, but I still have no sound at the moment with the one I am on:
AP : I9505XXUGNJ3
CP : I9505XXUGNJ3
CSC : I9505H3GGNJ2
Hope you can help!!!

Joku1981 said:
Dial *#1234# and tell me what appears. Kies 3 don't udpate good the devices sometimes. You can fix the problem with the sound maybe in some minutes, only reflashing the correct firmware through ODIN :highfive:
Click to expand...
Click to collapse
Just tried another firmware version, still no sound!
AP : I9505XXUGNI2
CP : I9505XXUGNI2
CSC : I9505EVRGNI2

jesus1987 said:
Just tried another firmware version, still no sound!
AP : I9505XXUGNI2
CP : I9505XXUGNI2
CSC : I9505EVRGNI2
Click to expand...
Click to collapse
What CSC do you have?

Joku1981 said:
What CSC do you have?
Click to expand...
Click to collapse
Here

Could installing a custom rom/firmware fix the sound problem do you think?

jesus1987 said:
Could installing a custom rom/firmware fix the sound problem do you think?
Click to expand...
Click to collapse
1. Take a look your CSC.
2. Go to Sammobile.com and download it.
3. Wipe all (remember backup your data before)
4. Flash and reflash this firmware in your device through ODIN (2 times).
5. It will have a hardware issue if you still without sound.

Joku1981 said:
1. Take a look your CSC.
2. Go to Sammobile.com and download it.
3. Wipe all (remember backup your data before)
4. Flash and reflash this firmware in your device through ODIN (2 times).
5. It will have a hardware issue if you still without sound.
Click to expand...
Click to collapse
I showed you the CSC above, in the image I attached. So what shall I search for on the sammobile site?

jesus1987 said:
I showed you the CSC above, in the image I attached. So what shall I search for on the sammobile site?
Click to expand...
Click to collapse
1. Make a data backup of your device and wipe all (This step is very important)
2. Download and flash this firmware through ODIN and you will recover the sound :fingers-crossed:
3. Flash that firmware again (2nd time) if you don't recover the sound.
4. Factory reset your phone.
5. Tell me if you won the battle :highfive:
6. I read the other post yours. I think will be a hardware problem maybe. You did very good all steps. Im sorry for that

Joku1981 said:
1. Download and flash this firmware through ODIN and you will recover the sound :fingers-crossed:
2. Flash that firmware again (2nd time) if you don't recover the sound.
3. Tell me if you won the battle :highfive:
Click to expand...
Click to collapse
This is the firmware I have already flashed onto my phone, I already downloaded it from sammobile. This is why you see the CSC code, because I already flash this! I will try flashing it again a few more times though.

jesus1987 said:
This is the firmware I have already flashed onto my phone, I already downloaded it from sammobile. This is why you see the CSC code, because I already flash this! I will try flashing it again a few more times though.
Click to expand...
Click to collapse
I updated my answer. Good luck :highfive:

Joku1981 said:
I updated my answer. Good luck :highfive:
Click to expand...
Click to collapse
I'm still convinced that it is software problem, as the music player says "unsupported file type" even for mp3, and volume ticker has a big delay when I try to change volume. And unlocking the lock screen is very slow. But, when I choose 'mute' for the sound, unlocking is fine and the phone seems fast again. So it seems that whenever the phone tried to play a sound, it can't, and freezes because it doesn't know what to do....
Also, making a call doesn't work. So I'm thinking it's a modem problem. I will try the BTU firmware....

Does anyone advise doing a full wipe with CWM, so formatting \system and everything, then flashing the stock rom back on?? I'm sure there is a problem with the system files. But I don't know how dangerous doing a format \system is if I flash a new firmware

Does anyone know which custom firmware I can flash if I'm currently on I9505XXUGNG8 stock? I'd appreciate the help, to save opening a new thread.
I don't care if it's a custom rom, or a pre rooted stock, the original stock firmwares aren't fixing my phone at all in regards to the no sound/can't phone/unresponsive camera

Maybe have a look here,
http://forum.xda-developers.com/showthread.php?t=2612167
Sent from my GT-I9505 using XDA Free mobile app

Flashed lollipop, now i cant make/answer calls or texts.

Hey
So i flashed lollipop on my galaxy note 3 SM-n9005. I was on custom kitkat rom before flashing.
I used this rom: http://forum.xda-developers.com/showthread.php?t=2495688
I dont know what went wrong but i cant make calls/recieve calls, same with text-messages.
I followed installation-guide and flashed:
modem.bin
NON-HLOS.bin
Quote:
1. IN ORDER TO AVOID ANY MINOR ISSUES, PLEASE FLASH THE OFFICIAL LOLLIPOP
MODEMS VIA ODIN FIRST FOUND HERE
2. PLEASE MAKE A CLEAN INSTALL EVEN THOUGH IF YOU ARE COMING FROM V22
CHANCES ARE YOU WILL BE FINE WITH A DIRTY ONE
3. I THINK THAT'S ALL- WHAT I DONT HAVE LISTED IN THE FEATURES MEANS ITS NOT SUPPOSED TO BE THERE
4. OH, THE 1ST TIME YOU BOOT POWER MODE IS ON- IF YOU DONT LIKE IT TURN IT OFF
5. THE FIRST TIME YOU BOOT IT MAY TAKE UP TO 10 MINUTES.
PLEASE BE PATIENT AND HAVE A CIGAR WHILE WAITING
6. ENJOY AND DONT BE A LEECHER
Click to expand...
Click to collapse
after that i went into recovery and did all the wipe's and flashed the rom.
ive tried 3 different roms and even flashed stock lollipop via odin... problem still here.. please help! :<

bumbiz said:
Hey...
Click to expand...
Click to collapse
if you call *#06#, do you see your imei ?

CorpusC said:
if you call *#06#, do you see your imei ?
Click to expand...
Click to collapse
Yes

When i try to make calls its like the phone starts to lagg, and it tries to call but nothing happens... i can receive text messages, but not phone calls.. and when i try to send text's it takes like 20 minutes for the receiver to get them...
When trying to call my phone from a friends phone, normal beeps... but it just doesnt show up on my phone..
edit: It did show up on my phone, 2 minute's after i hung up.. It seems like my phone is delayed ALOT wtf!

in settings/about phone, do you see the correct baseband(modem) number you flashed ? could be a bad download ? did you flash via pc odin ?

CorpusC said:
in settings/about phone, do you see the correct baseband(modem) number you flashed ? could be a bad download ?
Click to expand...
Click to collapse
it says
N9005XXUENA2
I reflashed everything with odin.. I dont know what to do >.<

CorpusC said:
in settings/about phone, do you see the correct baseband(modem) number you flashed ? could be a bad download ? did you flash via pc odin ?
Click to expand...
Click to collapse
what does this file do?: NON-HLOS.bin
I kind of think it has something to do with this.. just a feeling i have.

bumbiz said:
it says
N9005XXUENA2
Click to expand...
Click to collapse
thats a very old modem. download this modem (CP). power off phone, go to download mode with 3 button combo and flash it in the cp slot in odin.

CorpusC said:
thats a very old modem. download this modem (CP). power off phone, go to download mode with 3 button combo and flash it in the cp slot in odin.
Click to expand...
Click to collapse
Ok i will try and let you know, thank you!
edit: This seems to have fixed the issue! Thank you very much!!

bumbiz said:
Thank you very much!!
Click to expand...
Click to collapse
There's a "Thanks!" button for that...

I Need Help Please! PLEASE HELP!

Hello Everyone, i got a note 3 phone
SM-N9005 FCC ID: A3LSMN9005
SSN:- N9005GSMH
MADE IN VIETNAM BY SAMSUNG..
i bought this note 3 phone from UAE and it was with Kitkat 4.4.2 and when i was using it, some apps used to stop and not responding and get a pop-up message "System has stopped" or something like .com.system has stopped responding, also when i open some other apps the phone shuts down, so i turn it on, sometimes it works fine and sometimes it stops responding and shut down many times, so i had to make a full restore factory reset and still have the same problem, some guys told me you have problems with the rom, so i had to look for stock roms to it and found a lollipop rom under this name (AP_N9005XXUGBNL8_CL3643614_QB3415922_REV00_user_low_ship_MULTI_CERT.tar) and i installed samsung usb drivers just to make sure that everything is okay.
so when i started flashing it by odin it said Fail, so i tried once again but failed again, and i found my phone went to that black screen with (firmware upgrade encountered an issue, please select recovery mode in kies & try again), i couldn't get to my previous kitkat rom after that, but i'm able to go to download mode and recovery mode, so after this( brick) i had to search of how to unbrick it so after that i flashed philz as a recovery mode, and then flashed (All samsung recovery.tar) so then after flashing it, that message of (firmware upgrade encountered an issue, please select recovery mode in kies & try again) is gone, but i got another loop of restart each time i open the phone, it is not booting it is only taking me to the black start screen of android, and after a while it restarts itself.. and then when i tried to flash the same rom once again and connected my phone to my computer, drivers started configuring and so i waited to finish, but it failed it said (MTP USB Device Failed), though i still can see the phone connected over Odin in download mode.
so i had to look for another rom which is a kitkat stock version (N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar) which i found after downloading it and flashing it to my phone that it is for n900, which is normally failed flashing!.
so I don't know if i messed things up or not, and i really don't know what else or more to do ?
please give me your advice so i can restore this phone to its original stats.
Thank You!​

Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app

Rosli59564 said:
Are you sure the first firwmware you flashed is a full stock firmware?. What is the size?.
The second firmware you flashed isn't for n9005. Try different firmware specifially for UAE.
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?

hlabbad said:
well i found it on a web site also this rom size is (2.304 GB), and it had an additional files with it about more 4 other files to flash with
what do you think?
Click to expand...
Click to collapse
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.

Rosli59564 said:
I see. It's a leaked lollipop firmware. Flash again with 4 files except pit. First boot will take some time.
Click to expand...
Click to collapse
but when i flashed it with big sized file, the flashing process failed, it didn't work!

hlabbad said:
but when i flashed it with big sized file, the flashing process failed, it didn't work!
Click to expand...
Click to collapse
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.

Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
like this shown in the photo

Rosli59564 said:
It's exactly here.
http://forum.xda-developers.com/galaxy-note-3/development/n9005xxugbnl8-5-0-lollipop-rom-t2982110
What kind of error shown in odin?.
Click to expand...
Click to collapse
1. Go to Download Mode.
2. Tell me if you can flash this ONE using ODIN. It's the latest for KSA (Country Saudi Arabia).

hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
Choose corresponding file for BL, AP, CP & CSC. Do not tick repartition. You could also try with the firmware as suggested by joku

hlabbad said:
like this shown in the photo
Click to expand...
Click to collapse
You have repartion ticked but without a pit file, so obviously it will fail.
Sent from my SM-N9005 using Tapatalk

Thanks All for help

Did you solve the problem?