hey guys
i found today galaxy s4 i9515 firmware 5.0.1 Lollipop
and i waited it alot of time
so i want to install it to my phone with Odin
but that firmware from another country (poland)
this is my phone i9515 VE version
Model GT-I9515
Model name GALAXY S4 VE
Country Saudi Arabia
Version Android 4.4.2
Changelist 928311
Build date Wed, 05 Mar 2014 12:20:18 +0000
Product code KSA
PDA I9515XXU1ANC2
CSC I9515OJV1AND1
this is lollipop version (poland)
Model GT-I9515
Model name GALAXY S4 VE
Country Poland
Version Android 5.0.1
Changelist 4421239
Build date Tue, 10 Mar 2015 11:19:37 +0000
Product code XEO
PDA I9515XXU1BOC3
CSC I9515OXA1BOC3
so i can use it for my phone or what and my data will gone if i use it ??
thnx for help
1. Backup all you internal data copying all the folders inside to your computer.
2. Create a nandroid backup with a CUSTOM RECOVERY if you wanna come back later to KIT KAT.
3. Backup your IMEI and your EFS folder: HERE.
3. Download and flash this firmware without the BOOTLOADER if you wanna come back later to KIT KAT. Lil GUIDE for remove bootloader of one firmware compressed: HERE.
4. Flash the firmware via ODIN and if you need more help go: HERE.
Joku1981 said:
1. Backup all you internal data copying all the folders inside to your computer.
2. Create a nandroid backup with a CUSTOM RECOVERY if you wanna come back later to KIT KAT.
3. Backup your IMEI and your EFS folder: HERE.
3. Download and flash this firmware without the BOOTLOADER if you wanna come back later to KIT KAT. Lil GUIDE for remove bootloader of one firmware compressed: HERE.
4. Flash the firmware via ODIN and if you need more help go: HERE.
Click to expand...
Click to collapse
the different in country will make problem ??? in calls or any thing like this
what is csc i cannot understand the important of it
and can i setup firmware without root ?
m4mo2015 said:
the different in country will make problem ??? in calls or any thing like this
what is csc i cannot understand the important of it
and can i setup firmware without root ?
Click to expand...
Click to collapse
1. Different country (CSC different) affects only to 4G and OTA updates.
2. CSC ("Country Specific Code") is basically the configuration data APN, MMS, etc ... in each country.
3. Flashing new firmware erase root access.
It worked man without root
And all my data still the same after flash without wipe xD
And no problems with wifi networks
I want my Lollipop
m4mo2015 said:
It worked man without root
And all my data still the same after flash without wipe xD
And no problems with wifi networks
Click to expand...
Click to collapse
hey congrats you got your s4 updated.... i also have a KSA version of Galaxy s4.... and there's a Poland version rolling out , does it have Arabic Language in it?, and can you send me a link which tutorial did you follow for updating your s4.
Yes you can use it. There is no problem at all. And it will not erase your data.
I'm using it.
Regards
shakeelasghar said:
Yes you can use it. There is no problem at all. And it will not erase your data.
I'm using it.
Regards
Click to expand...
Click to collapse
i'm stuck on this
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
after this it just say it fails
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
using odin 3.07
mind to help how to fix?
or can you show how you successfully fixed yours?
Related
Hey !!!
as i said in the title i can't update my i9500 to 4.4.2 !!! any help??!!!
i.imgur.com/20Ygdcm.png
MadMaxtun said:
Hey !!!
as i said in the title i can't update my i9500 to 4.4.2 !!! any help??!!!
i.imgur.com/20Ygdcm.png
Click to expand...
Click to collapse
Hi mate
Please more info ..so we can help you
Why you can update? what do you have now , where you want to go , what have you done , what are the errors????????
MAX 404 said:
Hi mate
Please more info ..so we can help you
Why you can update? what do you have now , where you want to go , what have you done , what are the errors????????
Click to expand...
Click to collapse
'GT-i9500' does not support initializing in Kies , and if i try updating directly from my phone i get that i already have the latest version , i currently have 4.2.2 wanna go for 4.4.2
MadMaxtun said:
'GT-i9500' does not support initializing in Kies , and if i try updating directly from my phone i get that i already have the latest version , i currently have 4.2.2 wanna go for 4.4.2
Click to expand...
Click to collapse
Maybe your CSC code is wrong or your status is not correct ..
But you can always flash it directly with Oding , with out going thru Kies , backup first , make an EFS folder back up
Carrier TUN
http://www.sammobile.com/firmwares/3/?download=31233
Carrier OTU
http://www.sammobile.com/firmwares/3/?download=23294
MAX 404 said:
Maybe your CSC code is wrong or your status is not correct ..
But you can always flash it directly with Oding , with out going thru Kies , backup first , make an EFS folder back up
Carrier TUN
http://www.sammobile.com/firmwares/3/?download=31233
Carrier OTU
http://www.sammobile.com/firmwares/3/?download=23294
Click to expand...
Click to collapse
so there's no risk at all if i'm gonna flash with odin ??!! is that an official frimware ?! and if something happened can i restore my old frimware ?! if possible how ?! =D , btw my phone is not rooted , can i backup EFS folder backup without rooting ?!
MadMaxtun said:
so there's no risk at all if i'm gonna flash with odin ??!! is that an official frimware ?! and if something happened can i restore my old frimware ?! if possible how ?! =D , btw my phone is not rooted , can i backup EFS folder backup without rooting ?!
Click to expand...
Click to collapse
Hi mate ,
That is official firmware from Samsung , it will not void your warranty . To back up your EFS you can use an app like this:
https://play.google.com/store/apps/details?id=com.spocky.galaxsimunlock&hl=en
Is safe to flash with Odin BUT like all there is always a chance that something goes wrong ....just be careful , read , make sure you know what you need to do , follow the instructions given
Yes you can restore your old firmware , which one is it ? what carrier
But , there is always a but.....if you upgrade to 4.4.2 you can not go back to 4.3 or 4.2.2
MAX 404 said:
Hi mate ,
That is official firmware from Samsung , it will not void your warranty . To back up your EFS you can use an app like this:
https://play.google.com/store/apps/details?id=com.spocky.galaxsimunlock&hl=en
Is safe to flash with Odin BUT like all there is always a chance that something goes wrong ....just be careful , read , make sure you know what you need to do , follow the instructions given
Yes you can restore your old firmware , which one is it ? what carrier
But , there is always a but.....if you upgrade to 4.4.2 you can not go back to 4.3 or 4.2.2
Click to expand...
Click to collapse
http://i.imgur.com/f0WvQdr.png
MadMaxtun said:
http://i.imgur.com/f0WvQdr.png
Click to expand...
Click to collapse
TUN
http://www.sammobile.com/firmwares/3/?download=15981
Model: GT-I9500
Model name: GALAXY S4
Country: Tunisia
Version: Android 4.2.2
Changelist: 768420
Build date: Wed, 29 May 2013 15:52:45 +0000
Product Code: TUN
PDA: I9500XXUBMEA
CSC: I9500OJVBMEA
MODEM: I9500XXUBMEA
OTU
http://www.sammobile.com/firmwares/3/?download=15981
Model: GT-I9500
Model name: GALAXY S4
Country: Tunisia
Version: Android 4.2.2
Changelist: 768420
Build date: Wed, 29 May 2013 15:52:45 +0000
Product Code: TUN
PDA: I9500XXUBMEA
CSC: I9500OJVBMEA
MODEM: I9500XXUBMEA
Same as you have now , both from Tunisia both should work fine
max 404 said:
tun
http://www.sammobile.com/firmwares/3/?download=15981
model: Gt-i9500
model name: Galaxy s4
country: Tunisia
version: Android 4.2.2
changelist: 768420
build date: Wed, 29 may 2013 15:52:45 +0000
product code: Tun
pda: I9500xxubmea
csc: I9500ojvbmea
modem: I9500xxubmea
otu
http://www.sammobile.com/firmwares/3/?download=15981
model: Gt-i9500
model name: Galaxy s4
country: Tunisia
version: Android 4.2.2
changelist: 768420
build date: Wed, 29 may 2013 15:52:45 +0000
product code: Tun
pda: I9500xxubmea
csc: I9500ojvbmea
modem: I9500xxubmea
same as you have now , both from tunisia both should work fine
Click to expand...
Click to collapse
a big thanks mate !!!!! :d
MadMaxtun said:
a big thanks mate !!!!! :d
Click to expand...
Click to collapse
Any time . Good luck
MAX 404 said:
Any time . Good luck
Click to expand...
Click to collapse
Hey !! =(
Something went wrong !!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persdata.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
stuck there !!!!
MadMaxtun said:
Hey !! =(
Something went wrong !!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persdata.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
stuck there !!!!
Click to expand...
Click to collapse
Hi ,
Check the following:
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
From this great thread :
http://forum.xda-developers.com/showthread.php?t=2265477
Download file again just in case.
they only thing i didn't try is The pit file, idk what that is !!! what's that ?!
MadMaxtun said:
they only thing i didn't try is The pit file, idk what that is !!! what's that ?!
Click to expand...
Click to collapse
PIT=Partition Information Table , during flashing if selected will create the different partitions , you can try , follow instructions , select the right file and select re partition
If possible do a factory reset before flashing.
MAX 404 said:
PIT=Partition Information Table , during flashing if selected will create the different partitions , you can try , follow instructions , select the right file and select re partition
If possible do a factory reset before flashing.
Click to expand...
Click to collapse
The phone is bricked i can't factory reset !!! and i downloaded the pit file from here http://forum.xda-developers.com/showthread.php?t=2265477 , re-partition is checked is that okay ?!
MadMaxtun said:
The phone is bricked i can't factory reset !!! and i downloaded the pit file from here http://forum.xda-developers.com/showthread.php?t=2265477 , re-partition is checked is that okay ?!
Click to expand...
Click to collapse
Hi.
Check here from thread:
Note 2: If you have a corrupted partition table (Odin says: "there is no pit partition" or "Re-Partition operation failed"), flash pit file for your device (attached, dont forget to unzip it) (put it in pit window) with your firmware (some users reported that it worked without firmware), in this case "Re-Partition" must be marked.
Another question , you are flashing same or newer firmware right? Odin will not let you downgrade...
MAX 404 said:
Hi.
Check here from thread:
Note 2: If you have a corrupted partition table (Odin says: "there is no pit partition" or "Re-Partition operation failed"), flash pit file for your device (attached, dont forget to unzip it) (put it in pit window) with your firmware (some users reported that it worked without firmware), in this case "Re-Partition" must be marked.
Another question , you are flashing same or newer firmware right? Odin will not let you downgrade...
Click to expand...
Click to collapse
newer frimware , have 4.2.2 trying 4.4.2 (you gave me the download link),can i try this frimware http://www.sammobile.com/firmwares/3/?download=36377 ?
MadMaxtun said:
newer frimware , have 4.2.2 trying 4.4.2 (you gave me the download link),can i try this frimware http://www.sammobile.com/firmwares/3/?download=36377 ?
Click to expand...
Click to collapse
Ok , just want to make sure is not a "downgrade " problem
MAX 404 said:
Ok , just want to make sure is not a "downgrade " problem
Click to expand...
Click to collapse
tried another frimware !! same problem
System.img
FAIL!
HEEELP !! what should i do ?!
i saw that some fixed it by the pit file ! should i try it ?! pit file + the new frimware that i want to flash...
MadMaxtun said:
tried another frimware !! same problem
System.img
FAIL!
HEEELP !! what should i do ?!
i saw that some fixed it by the pit file ! should i try it ?! pit file + the new frimware that i want to flash...
Click to expand...
Click to collapse
Hi ,
Yes try it , follow instructions in note 2
Hi all,
I have a TTT region N900 OS 4.3
Modem : N900UBUCMK1
I try to flash via Odin to upgrade to TGY region N900 OS 4.4.2 but realised flashing failed at end of process "
<ID:0/005> cache.img
<ID:0/005> FAIL!"
Question:
I saw the TGY modem is "N900XXUENG1", is is because the modem difference region having this problem?
I try to flash back the TTT 4.3 OS ROM but failed..
Need advise and help
Thanks !!!
Try latest kk but not TGY
Sent from my SM-N9005 using Tapatalk
qunnin said:
Hi all,
I have a TTT region N900 OS 4.3
Modem : N900UBUCMK1
I try to flash via Odin to upgrade to TGY region N900 OS 4.4.2 but realised flashing failed at end of process "
<ID:0/005> cache.img
<ID:0/005> FAIL!"
Question:
I saw the TGY modem is "N900XXUENG1", is is because the modem difference region having this problem?
I try to flash back the TTT 4.3 OS ROM but failed..
Need advise and help
Thanks !!!
Click to expand...
Click to collapse
Unfortunately TGY firmware is not compatible with other firmware (including TTT region)
Now you will need the PIT file to flash with the appropriate firmware (with the option Re-Partition selected).
- If you want to flash TGY firmware, you will need the PIT file from TGY device.
- If you want to flash TTT firmware, you will need the original PIT file from your device.
And note that do not flash back to the 4.3 as that may brick your device.
Try to flash only 4.4.2 from now on.
Thanks for your informative reply.
Do you know where I can download TTT or TGY pit file?
Most sites only have the ROM but not pit files
Thanks alot for your advice.
I successfully flash the TGY ROM via Odin using a TGY Pit with Re-Partition option
Phone reboot stuck at "Samsung Logo" ... go to Recovery ... reset data .. phone boot ok !
But keep show S pen input failed...then I reflash via odin without re-parition option... working well now
Thanks !!! Thanks !!
qunnin said:
Thanks alot for your advice.
I successfully flash the TGY ROM via Odin using a TGY Pit with Re-Partition option
Phone reboot stuck at "Samsung Logo" ... go to Recovery ... reset data .. phone boot ok !
But keep show S pen input failed...then I reflash via odin without re-parition option... working well now
Thanks !!! Thanks !!
Click to expand...
Click to collapse
Glad that it's useful to you.
And also thanks for your instruction.
Great.
Hi thnx to all the Devs out there for making our android phones fun to work with,
I live in UGANDA
I hav recently acquired a Galaxy Note 3 N9005, 32GB running 4.4.2 Kitkatt and Basebrand version..N9005ZHUENF1...
I hav rooted it using TOWEL ROOT, and so far so good.
I hav tried to update to LOLLIPOP twice using odin 3.09 and 3.10, following the instructions well, but without success, THE PHONE WAS NOT BRICKED AT BOTH TRIALS AND ITS STILL WORKING PERFECTLY.
These are the firmwares i tried flashing...
N9005XXUGBOB6_N9005XEOGBOA4_N9005XXUGBOA1_HOME.tar.md5.....and
N9005XXUGBOEA_N9005OJVGBOE4_N9005XXUGBOD3_HOME.tar.md5
I always get this error message
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I really need to update my phone to Lollipop, Please help any one, Thanx in advance
mjmbirige said:
Hi thnx to all the Devs out there for making our android phones fun to work with,
I live in UGANDA
I hav recently acquired a Galaxy Note 3 N9005, 32GB running 4.4.2 Kitkatt and Basebrand version..N9005ZHUENF1...
I hav rooted it using TOWEL ROOT, and so far so good.
I hav tried to update to LOLLIPOP twice using odin 3.09 and 3.10, following the instructions well, but without success, THE PHONE WAS NOT BRICKED AT BOTH TRIALS AND ITS STILL WORKING PERFECTLY.
These are the firmwares i tried flashing...
N9005XXUGBOB6_N9005XEOGBOA4_N9005XXUGBOA1_HOME.tar.md5.....and
N9005XXUGBOEA_N9005OJVGBOE4_N9005XXUGBOD3_HOME.tar.md5
I always get this error message
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I really need to update my phone to Lollipop, Please help any one, Thanx in advance
Click to expand...
Click to collapse
1. Try to flash via ODIN this ONE. Your device is using Hong Kong (TGY) and I think you can't flash european firmwares on it.
2. Install this APP and add screenshots if you can't.
Lollipop update
Joku1981 said:
1. Try to flash via ODIN this ONE. Your device is using Hong Kong (TGY) and I think you can't flash european firmwares on it.
2. Install this APP and add screenshots if you can't.
Click to expand...
Click to collapse
thnx will try that, but am also trying out thid
http://forum.xda-developers.com/showthread.php?t=2613374
Hongkong galaxy note 3 lollipop update
mjmbirige said:
thnx will try that, but am also trying out thid
http://forum.xda-developers.com/showthread.php?t=2613374
Click to expand...
Click to collapse
Thanxs for all your help, but Has anyone succeeded in updating the TGY 32GB, Note3 to Lollipop, because I hav failed, ODIN always shows me an error,
I even downloaded the latest firmware available for Hongkong and it also failed,
In ODIN mode, it shows
Product name; N900A
Current Binary; Samsung official
System status; custom
Knox;0X0
Write protection; Enable
My phone is N9005 32GB running N9005ZHUENF1, HELP SOMEONE PLEASE
Download the XSI firmware from sammobile
Just use the search option in the sammobile site
You have an n900a, NOT an n9005.
SM-N900A not SM-N9005
Hello
I have the same smartphone, from bootloader version N900AUCUCNC2 this means its SM-N900A ---> (AT&T) not SM-N9005
I have installed this rom "N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5" ---> (Stock Lollipop) and worked very good but couldn't root following this Thread
After going back to 4.4.2 > root > Safestrap recovery > rooted Lollipop Here phone stuck at AT&T boot logo
Any help getting working rooted Lollipop Appreciated
Does anyone have the files for the latest Nougat update released from AT&T on the Galaxy S7? I tried flashing a previous version in Odin from the BQA4 update and I think I bricked my device. I can get it into download mode but it won't flash anything in Odin. Also, if I try to power it up normally, it just flashes a blue recovery booting text in the upper left corner of the screen.
I'm using the latest Odin 3.12.3.
Any help is appreciated.
Thanks
Ed
I have the SAME problem, AT&T is sending a new device (Refurbished) but I would rather fix my phone. Does anyone have a solution? I'm in the same boat as toast1850.
I only have these ones here based on Android 6:
AP: https://drive.google.com/open?id=0B7C7EaSz8kzrV3B1aHdGQ213UDg
BL: https://drive.google.com/open?id=0B7C7EaSz8kzrU1EwZGdQeDF6OHc
CP: https://drive.google.com/open?id=0B7C7EaSz8kzrcU9yOFYxSjJhVVE
CSC: https://drive.google.com/open?id=0B7C7EaSz8kzrcXI5enBJZHI1cTg
Extract these files with winrar or 7zip
Please note this will wipe your device, make a backup if you can before flashing, Flash using this odin version by Princecomsy credit goes to him:
https://drive.google.com/open?id=0B7C7EaSz8kzrSktDZjJnal94UVk
once you are on android 6, check for updates to download android 7.
micallan_17 said:
I only have these ones here based on Android 6:
AP: https://drive.google.com/open?id=0B7C7EaSz8kzrV3B1aHdGQ213UDg
BL: https://drive.google.com/open?id=0B7C7EaSz8kzrU1EwZGdQeDF6OHc
CP: https://drive.google.com/open?id=0B7C7EaSz8kzrcU9yOFYxSjJhVVE
CSC: https://drive.google.com/open?id=0B7C7EaSz8kzrcXI5enBJZHI1cTg
Extract these files with winrar or 7zip
Please note this will wipe your device, make a backup if you can before flashing, Flash using this odin version by Princecomsy credit goes to him:
https://drive.google.com/open?id=0B7C7EaSz8kzrSktDZjJnal94UVk
once you are on android 6, check for updates to download android 7.
Click to expand...
Click to collapse
Thank you very much, Downloading now to try later tonight!
thegreenfamily04 said:
Thank you very much, Downloading now to try later tonight!
Click to expand...
Click to collapse
welcome
So I tried the above instructions and received this message in Odin -
ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
Disregard my previous note. I didn't have the samsung USB drivers installed. After installing them and placing the files in the corresponding sections I had a working phone again! Thanks for all of your help micallan_17!
By the way, I couldn't get it to work with the Princecomsy odin so I used the regular Odin 3.12. It would hang on Setup Connection every time with Princecomsy. Just an FYI for anyone else out there with this same situation.
Just wanted to say thanks again! These files unbricked my phone, I'm now running official AT&T Android 7.0 - G930AUCU4BQA6
thegreenfamily04 said:
I have the SAME problem, AT&T is sending a new device (Refurbished) but I would rather fix my phone. Does anyone have a solution? I'm in the same boat as toast1850.
Click to expand...
Click to collapse
toast1850 said:
Does anyone have the files for the latest Nougat update released from AT&T on the Galaxy S7? I tried flashing a previous version in Odin from the BQA4 update and I think I bricked my device. I can get it into download mode but it won't flash anything in Odin. Also, if I try to power it up normally, it just flashes a blue recovery booting text in the upper left corner of the screen.
I'm using the latest Odin 3.12.3.
Ed
Click to expand...
Click to collapse
Correct me if I am wrong, but I believe that the unfortunate individuals whom took the BQC2 via OTA would not be able to use the files micallan_17 provided. In my case, the daughter was not worried about rooting her device and therefore took the update to the latest... Wouldn't this make the downgrade while the bootloader is now BQC2 ill advised as it would potentially brick the phone.
I suspect the G930AUCS4BQC2_CL10280464_QB12904132_REV02_user_low_ship_MULTI_CERT_meta.tar.rar file muniz_ri uploaded and mentioned in his thread below might rectify that scenario.
[UPDATE] March 1, 2017 Security Update G930A… | AT&T ...
Hello,
I am unsuccessfully fighting with sotfbricked Galaxy S8 model G950F.
I've managed to flash via ODIN latest BL, CP and CSC, which makes stock recovery available.
So to sum up - only stock recovery and Download Mode works.
When flashing AP - no matter if correct file for latest firmware according to my CSC, or to other CSC files - Odin flashes almost 70%, then suddenly stops:
<ID:0/005> system.img
<ID:0/005> userdata.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
On the phone it says then in Download mode "only official released binaries are allowed to be flashed(SYSTEM)" in red.
Has anyone successfully solved similar situation? Any ideas worth trying?
download the right firmware. check your latest firmware of phone model at sammobile.
Already did that. Downloaded almost 9 different firmware for either my carrier CSC or country CSC, but the error persists.
what binary your phone required?
What do you mean?
I've tried to flash G950FXXS7DTB5, G950FXXS7DTA6, G950FXXS7DTA1 for OPV and XEO regions.
it will work if you flash the right set of firmware.
It seems like right set of firmware doesn't work
SDeba said:
It seems like right set of firmware doesn't work
Click to expand...
Click to collapse
G950FXXS7D numer 7 you must look in other firmwares
Every single binary 7 firmware is failing due to "only official released binaries are allowed to be flashed(SYSTEM)" in red in Download Mode after trying to flash.
SDeba said:
Every single binary 7 firmware is failing due to "only official released binaries are allowed to be flashed(SYSTEM)" in red in Download Mode after trying to flash.
Click to expand...
Click to collapse
Only official binary error is probably due to flashing firmware not signed by Samsung. This can happen when bootloader is locked and/or rmm/kg state is prenornal ( flashing non Samsung firmware )
While flashing the correct Samsung firmware will normally get you out of trouble with the error message.
What odin version are you using?
Can you post a screen shot of download mode.
I've tried ODIN 3.13.1 , 3.14.4, 3.14.1 (patched), 3.12.7 in various firmware configurations.
Below screenshot of data from download mode (with KG State - Prenormal), and screenshot of the error after trying to flash AP.
Model SM-G950F
Model name Galaxy S8
Country
Version Android 9
Changelist 17263988
Build date Fri, 31 Jan 2020 04:08:10 +0000
Security Patch Level 2020-02-01
Product code OPV
PDA G950FXXS7DTA6
CSC G950FOGC7DTA1
i hope this work for you
lindow13 said:
Model SM-G950F
Model name Galaxy S8
Country
Version Android 9
Changelist 17263988
Build date Fri, 31 Jan 2020 04:08:10 +0000
Security Patch Level 2020-02-01
Product code OPV
PDA G950FXXS7DTA6
CSC G950FOGC7DTA1
i hope this work for you
Click to expand...
Click to collapse
Just like I've stated before - tried flashing this firmware many times without luck.
can send a odin screenshot with firmware loaded? this set of firmware. and try using frija tool to download firmware
spawnlives said:
Only official binary error is probably due to flashing firmware not signed by Samsung. This can happen when bootloader is locked and/or rmm/kg state is prenornal ( flashing non Samsung firmware )
While flashing the correct Samsung firmware will normally get you out of trouble with the error message.
What odin version are you using?
Can you post a screen shot of download mode.
Click to expand...
Click to collapse
I've tried ODIN 3.13.1 , 3.14.4, 3.14.1 (patched), 3.12.7 in various firmware configurations.
SDeba said:
Hello,
I am unsuccessfully fighting with sotfbricked Galaxy S8 model G950F.
I've managed to flash via ODIN latest BL, CP and CSC, which makes stock recovery available.
So to sum up - only stock recovery and Download Mode works.
When flashing AP - no matter if correct file for latest firmware according to my CSC, or to other CSC files - Odin flashes almost 70%, then suddenly stops:
<ID:0/005> system.img
<ID:0/005> userdata.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
On the phone it says then in Download mode "only official released binaries are allowed to be flashed(SYSTEM)" in red.
Has anyone successfully solved similar situation? Any ideas worth trying?
Click to expand...
Click to collapse
I don't really get your point. Do you want to install the official firmware or a custom one? One easy solution would be to flash twrp and search the forum for a ROM you want to flash (there is even stock debloated ones that are better than total stock in my opinion). Can you please provide more details on what you are trying to achieve and what's the problem?
SDeba said:
I've tried ODIN 3.13.1 , 3.14.4, 3.14.1 (patched), 3.12.7 in various firmware configurations.
Click to expand...
Click to collapse
Anything above Odin version 3.13.1 should do, as they support .lz4 compression ratio.
You screen shots from previous post looks ok to be flashing stock firmware. With KG state being prenormal you will have issues flashing non Samsung signed firmware ie: twrp, root etc.
Since the Knox has been tripped do you know what has been done to the phone before. May provide some info on what is happening.
As a matter of interest have you tried Samsung Smart Switch to try and fix the issue. It does have a recovery option in there. Do you have latest Samsung drivers installed on PC.
Note: Running Smart Switch and Odin can cause issues with each other.