I can't get my pc to recognize the USB as a port. I have installed the drivers for vzw and even the universal ones for any g2 all after done of installation I have restarted. After five restarts. Three different USB port entries and two USB android cables used I still get no port recogniztion. Please help me get back to stock on my vs980.
Related
The probem:
USB Mass Storage not working in Recovery. I tried everything, reflashing different recovery but its not working, it doesn't give an error message. When card is not inside however it does complain. SdCard is fine because I can flash zips that are on it. Tested on both windows and ubuntu. tried another card as well
USB Mount doesn't work in CM7.2 or any rom or nand restore i've done recently. I had Insomnia at some point, then inferno, then cm 7.1, none of these restores work. Again here no errors, I do not even see the sign for usb detection. usb debugging is enabled/disabled no difference. phone however still charges though.
I'm on a trip right now, but I've not had the chance yet to get another usb cable but the two I have dont work.
katsumeiyo said:
The probem:
USB Mass Storage not working in Recovery. I tried everything, reflashing different recovery but its not working, it doesn't give an error message. When card is not inside however it does complain. SdCard is fine because I can flash zips that are on it. Tested on both windows and ubuntu. tried another card as well
USB Mount doesn't work in CM7.2 or any rom or nand restore i've done recently. I had Insomnia at some point, then inferno, then cm 7.1, none of these restores work. Again here no errors, I do not even see the sign for usb detection. usb debugging is enabled/disabled no difference. phone however still charges though.
I'm on a trip right now, but I've not had the chance yet to get another usb cable but the two I have dont work.
Click to expand...
Click to collapse
Its either your USB cable or your phone USB jack mine does the same thing I have to wiggle it to get a good connection cuz my USB cable sucks cuz with others it recognizes it right away.
...Awesome... said:
Its either your USB cable or your phone USB jack mine does the same thing I have to wiggle it to get a good connection cuz my USB cable sucks cuz with others it recognizes it right away.
Click to expand...
Click to collapse
He has tried two cables, so I would tend to lean toward the port.
Sent from my HTC Glacier using XDA
i am in the same boat. looks like my charging port is bad. anyway to replace the charging port? i am not good with soldering
it's not ur usb port
it's htc.. htc devices doesn't support usb host feature.
If you have a rom and kernal that do support usb host then try powering the usb as the htc devices do not provide power out.. use usb Y cable
tempuser2005 said:
it's htc.. htc devices doesn't support usb host feature.
If you have a rom and kernal that do support usb host then try powering the usb as the htc devices do not provide power out.. use usb Y cable
Click to expand...
Click to collapse
What? He isn't trying to host the connection. He is trying to use his phone as a USB mass storage device.
Where did you get USB host from in his questions?
Sent from my HTC Glacier using XDA
Hi all,
I am having the same problem, except perhaps with a different cause. My user account on Windows 7 became corrupt and I can no longer log in, so I had to create a new one.
On the new account, my myTouch 4G is not recognized for mass storage/disk drive mode via USB. The USB cable does work, the port is okay, and I've used both with other devices. The myTouch shows as charging when connected to the computer. I have uninstalled and reinstalled all of the myTouch drivers, restarted computer and phone, to no avail.
When it is connected in USB, it shows as generic "Drive F" and is inaccessible. When I check properties it says mytouch4g. When I check "Devices" it is recognized as portable storage. I have tried with USB debugging on and off, and have set "connected to computer" mode to disk drive.
Any thoughts? I thought possibly loading the generic ADB driver again might help, but I cannot get to the stage where I can force it to load that driver instead of the HTC one.
Hi folks I have a rooted N7 and have used plenty of different ROMs in the last 2 years. Since installing KK 4.4.4 I cannot connect to my computer by USB, neither Windows 8 or Linux.
OTG is working as I can access external USB cards, there is nothing wrong with the USB leads, needless to say I have tried different leads in different USB ports, the tablet still charges when connected by a USB cable.
In settings, storage has MTP activated, I have tried PTP and it still will not work.
In developer I have activated USB / Android debugging.
I am using multirom and have done so since it came out
My main rom is MAHDI 2.7
Secondaries areCM11 20140903 and pac_grouper-1-20140903
Any help would be appreciated.
Think it's solved
All my other Android devices connect with my computers by usb so I have to conclude that there is something wrong with the N& OTG port.
I've had my S4 for just about two years now, and have been looking into getting a new phone. I wanted to update it to 5.0 and back it up. My charging port went (yet again) so I bought a replacement and now it will charge like new. However, I cannot get it to connect to any PC and it won't show up in devices.
Things I have tried to remedy this:
-Unistalled/reinstalled newest drivers
-Uninstalled/reinstalled newest Kies
-Four different cables (all of which claim to be OEM, one IS OEM)
-Multiple USB ports on two PCs (Win 7, Win 10) and an iMac
-Checked all connections of new charging port
-Changed USB settings to MTP, MTP+ADB
As I said, I have run out of options. I can only get this thing to charge when connected to a computer, no data. It won't even show up under Device Manager or as a USB storage device.
Put ur phone in download mode then try connecting if ur PC didn't find ur phone it maybe the problem with ur phones USB port
anfalanl said:
Put ur phone in download mode then try connecting if ur PC didn't find ur phone it maybe the problem with ur phones USB port
Click to expand...
Click to collapse
that didn't work either. The charging port is brand new, and also a brand new cable. Any other suggestions?
Try flashing your device with the default rom
how would I do that? I can't connect it to PC to back it up or download a ROM
i am not new to flashing samsung or android phones. I am new to using mac. I have tried odin v3.07-v3.10 and nothing recognizes my phone, I have installed and unistalled and reinstalled all drivers, tried all four of my usb ports, 4 different usb cords including a usb 3.0 cord from my samsung harddrive. all I am trying to do is flash cwm. I have samsung kies and android file transfer and both recognize my phone when it is powered on normally and plugged in in all usb ports with all cords. am I missing something? Is there some secret to download mode on this note3? (if there are multiple posts about this I appologize but from the ones ive checked things like usb cord swapping fixes most of these issues) I have the cwm file ready to go and am familiar with odin as I have been using it for a few years on and off, I have never had this issue and am just dumbfounded
s5 usb connect - device not recognized cant access secret menu *#0808#
can anyone give advice how to access menu *#0808# when I dial it trys to call the number not open menu
my usb is not work on s5
always says device not recognized but it charges perfect on connect
no one has advice?
Look for Samsung usb driver, it will open a Samsung Dev website, download and install the drivers. Of it's not working either, try on another USB port, another computer, another cable, another phone with the same steps above, of it's not recognizing it on all computers, it's a faulty USB port, it may charge but no data transfer.
midi_1996 said:
Look for Samsung usb driver, it will open a Samsung Dev website, download and install the drivers. Of it's not working either, try on another USB port, another computer, another cable, another phone with the same steps above, of it's not recognizing it on all computers, it's a faulty USB port, it may charge but no data transfer.
Click to expand...
Click to collapse
i have a g900v s5 here
the usb port is a new one, says g9008v on the usb hardware. is there a way to check the usb driver on the phone? maybe the usb driver needs reset or update