Hey guys,
I'm trying to gain root access for Lollipop, following this guide, and I can't seem to get Safestrap to work. I've installed it, run it, and clicked "Install Recovery"... when I reboot, it boots as usual. I'm running NK2. Any suggestions? Thanks.
Tony
P.S.- Is there a way to update to 5.0 without using safestrap? I don't care about backing up my phone.
Toekneetwo said:
Hey guys,
I'm trying to gain root access for Lollipop, following this guide, and I can't seem to get Safestrap to work. I've installed it, run it, and clicked "Install Recovery"... when I reboot, it boots as usual. I'm running NK2. Any suggestions? Thanks.
Tony
P.S.- Is there a way to update to 5.0 without using safestrap? I don't care about backing up my phone.
Click to expand...
Click to collapse
If you don't hit the recovery button while it's booting up, safestrap is easy to miss. It will automatically bypass safestrap and continue a normal boot within a few seconds.
I do believe you do need safestrap to install rooted roms because of our locked bootloader.
I believe safetrap is not yet compatible with lollipop. If you're on 5.0, you need to downgrade to a kitkat kernel in order for you to use safetrap. Once you're done using safetrap, just upgrade your kernel back to lollipop. This is all done through odin btw...
Sent from my SM-G900V using Tapatalk
Rapunzl said:
If you don't hit the recovery button while it's booting up, safestrap is easy to miss. It will automatically bypass safestrap and continue a normal boot within a few seconds.
I do believe you do need safestrap to install rooted roms because of our locked bootloader.
Click to expand...
Click to collapse
Okay, I may have missed it, I'll check for that again and post my findings
rhodiggah said:
I believe safetrap is not yet compatible with lollipop. If you're on 5.0, you need to downgrade to a kitkat kernel in order for you to use safetrap. Once you're done using safetrap, just upgrade your kernel back to lollipop. This is all done through odin btw...
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Yes, I'm on KitKat, after a long morning messing with things (thanks Rapunzl!) I'm rooted, SuperSU is installed, as is BusyBox (and obviously Safestrap)...
Tony
No go.... I don't see anything that says Safestrap on the boot screens. Furthermore, when I hit "install recovery", it says "installed", but then it says "State: Not Installed," no matter what. See the screenshot I've attached. Thanks again.
Tony
Toekneetwo said:
No go.... I don't see anything that says Safestrap on the boot screens. Furthermore, when I hit "install recovery", it says "installed", but then it says "State: Not Installed," no matter what. See the screenshot I've attached. Thanks again.
Tony
Click to expand...
Click to collapse
Did you run SuperSU and let it update? I had to do that and then reinstall SS.
Rapunzl said:
Did you run SuperSU and let it update? I had to do that and then reinstall SS.
Click to expand...
Click to collapse
Just tried that, no luck. Uninstalled SafeStrap, ran SuperSU (I didn't disable KNOX because that always hangs up on me... hope that's okay), reinstalled SafeStrap. Is SS 3.75 the version I want? Thanks again.
Tony
Toekneetwo said:
Just tried that, no luck. Uninstalled SafeStrap, ran SuperSU (I didn't disable KNOX because that always hangs up on me... hope that's okay), reinstalled SafeStrap. Is SS 3.75 the version I want? Thanks again.
Tony
Click to expand...
Click to collapse
Yes. 3.75.
Did you open & install busybox?
Toekneetwo said:
Just tried that, no luck. Uninstalled SafeStrap, ran SuperSU (I didn't disable KNOX because that always hangs up on me... hope that's okay), reinstalled SafeStrap. Is SS 3.75 the version I want? Thanks again.
Tony
Click to expand...
Click to collapse
Make sure Busybox is installed. Disabling KNOX just requires a reboot between pressing the "Disable KNOX" button and it actually doing so. So....
Install SuperSU and update binaries
When asked if you want to disable KNOX, select yes
Phone will hang on disabling KNOX (won't be able to do it) so you may have to pull battery or somehow force a reboot
Turn phone on again and install SuperSU again
Disable KNOX should work fine
Install Busybox from Google play store
Reboot
Install Safestrap apk
Reboot
Press button to boot into Safestrap
Install ROM
erw38 said:
Make sure Busybox is installed. Disabling KNOX just requires a reboot between pressing the "Disable KNOX" button and it actually doing so. So....
Install SuperSU and update binaries
When asked if you want to disable KNOX, select yes
Phone will hang on disabling KNOX (won't be able to do it) so you may have to pull battery or somehow force a reboot
Turn phone on again and install SuperSU again
Disable KNOX should work fine
Install Busybox from Google play store
Reboot
Install Safestrap apk
Reboot
Press button to boot into Safestrap
Install ROM
Click to expand...
Click to collapse
That did it! Thanks so much, erw38 and everyone else who took the time to help!
Tony
Related
So none of my programs are working corectly since I updated the OTA when I was rooted.
What is the next step for me? Is there a way to Re-Root? Titanium backup seems to not be working right...
I don't want to lose my current settings like I did when I first rooted. What is the best thing for me to do?
Thanks!
Google Kingo root, works with the most recent update. Once rooted reinstall xposed framework to get you back up and running
Sent from my SM-N900V using Tapatalk
Brandonrz said:
Google Kingo root, works with the most recent update. Once rooted reinstall xposed framework to get you back up and running
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I read Kingo root was malicious no? Is there a way to root again though without losing my old data?
dpoverlord said:
I read Kingo root was malicious no? Is there a way to root again though without losing my old data?
Click to expand...
Click to collapse
Preach2k said:
I know of people that got back rooted using Kingo root.
All Android devices supported by Kingo Android Root
UPDATE!!!
Here is the message that has just been posted:
***************
Say BYE-BYE to Kingo, well for those of you that have been following the saga that continues with this latest update. Hashcode for those who didn't know took the Kingo Update, which he and many skilled others knew what we were in for, but the chance for Root was great to take the risk. Anyhow, it appears there is now a way to use Kingo to gain Root, then Remove it after gaining Root, returning back to our safe version of Chainfire's SuperSU version 1.65. It almost seemed like a no-brainer after I came across it in one of his post. Refer first to post, [RECOVERY LOCKED] Safestrap Recovery v3.63 (BETA) [2013-11-07] - Page 22 - (VZW) Galaxy Note 3 Development - RootzWiki (http://rootzwiki.com/topic/106986-recovery-locked-safestrap-recovery-v363-beta-2013-11-07/?p=1523354) With this post you are basically going to Chainfire's site and downloading SuperSU 1.65 in the .zip to flash, which will remove the Kingo apk and su. Hashcode recommends using his Safestrap to flash the zip. I on the other hand am still having some issues with SS, therefore I am finding Flash Gordon to be more effective and easier to use, xda-developers - View Single Post - [APK][Flash Zips WITHOUT a Recovery!]Flash Gordon: an Edify to Bash parser/translator (http://forum.xda-developers.com/showpost.php?p=40702571&postcount=1). I have included the link to Flash Gordon which it is an app, works very easily just download the SuperSU 1.65.zip to your device find the zip with Flash Gordon and run it, then Reboot it and your done. No more Kingo.
Click to expand...
Click to collapse
This seems really complicated any way to to do this step by step so I don't break my phone?
anyone?
Kingo is the only root method for the N3 that I know of at this time. You basically quoted the step by step two posts up.
1. Download and install Kingo
2. Run the exploit
3. Obtain root.
You have a few of options after this.
1st option and the one I'd recommend.
1. Download SafeStrap and Chainfire's SuperSU 1.65 zip file.
2. Install the SS apk. Then open the app and Install Recovery.
3. Make sure you have the SU zip file either in your internal or external storage.
4. Reboot. You will get the splash screen after a few moments.
5. Select Recovery with the menu key.
6. Select Install from recovery, navigate to the place you stored the SuperSU zip file. Select it and swipe to install it.
7. Reboot.
The 2nd option is Flash Gordon, but I've never used it so I will not pretend to know the steps for it.
The 3rd option and I'm not certain it will work is to open the SuperSU app and select Settings. Then scroll down to the Cleanup section and select Reinstall. I believe that this will leave you rooted and allow you to then download and reinstall the binaries from Google Play, but I have not tried it so I cannot recommend it, but it would be the easiest way.
G8orDroid said:
Kingo is the only root method for the N3 that I know of at this time. You basically quoted the step by step two posts up.
1. Download and install Kingo
2. Run the exploit
3. Obtain root.
You have a few of options after this.
1st option and the one I'd recommend.
1. Download SafeStrap and Chainfire's SuperSU 1.65 zip file.
2. Install the SS apk. Then open the app and Install Recovery.
3. Make sure you have the SU zip file either in your internal or external storage.
4. Reboot. You will get the splash screen after a few moments.
5. Select Recovery with the menu key.
6. Select Install from recovery, navigate to the place you stored the SuperSU zip file. Select it and swipe to install it.
7. Reboot.
The 2nd option is Flash Gordon, but I've never used it so I will not pretend to know the steps for it.
The 3rd option and I'm not certain it will work is to open the SuperSU app and select Settings. Then scroll down to the Cleanup section and select Reinstall. I believe that this will leave you rooted and allow you to then download and reinstall the binaries from Google Play, but I have not tried it so I cannot recommend it, but it would be the easiest way.
Click to expand...
Click to collapse
Thanks a lot, I prefered the third option, but I can't even open SuperSU it must have to do with already having updated the phone the other week.
Thanks so much!
dpoverlord said:
Thanks a lot, I prefered the third option, but I can't even open SuperSU it must have to do with already having updated the phone the other week.
Thanks so much!
Click to expand...
Click to collapse
Yes, you'll have to re-root using kingo before the third option would work, if it works at all.
Sent from my SM-N900V using Tapatalk
Thanks I went ahead and at the top of SuperSU it has an item called ADB Shell.
How do I verify Kingo is off?
delete
Build MJ7, Kingo failed...
---------- Post added at 11:07 PM ---------- Previous post was at 10:52 PM ----------
anourack said:
Build MJ7, Kingo failed...
Click to expand...
Click to collapse
Scratch that, I hate to reboot my Laptop for it to work... strange....
i haven't received my device yet but...
i was thinking as a fourth option after you use kingo to root
if you could install ClockworkMod Superuser and remove kingo Supersu and then reinstall SuperSU from the play store!
I was updating superSU on my note 3 after root. I tried to use game killer, only to get the message that root wasn't available. I loaded up superSU and was told that the binary couldn't be found... I downloaded a root checker and it said that root access was there... So I unrooted and re rooted. Same deal.
I'm not sure how to fix the issue.
Can anyone please help
(SM-N9005)
BallaratBloke81 said:
I was updating superSU on my note 3 after root. I tried to use game killer, only to get the message that root wasn't available. I loaded up superSU and was told that the binary couldn't be found... I downloaded a root checker and it said that root access was there... So I unrooted and re rooted. Same deal.
I'm not sure how to fix the issue.
Can anyone please help
(SM-N9005)
Click to expand...
Click to collapse
Somethings wrong with your su I think. Have to given privillages to game killer in su?
Sent from Galaxy Note 3 SM-N9005
thahim said:
Somethings wrong with your su I think. Have to given privillages to game killer in su?
Sent from Galaxy Note 3 SM-N9005
Click to expand...
Click to collapse
I have given it privileges. But when I open supersu says there is something wrong with su binary.
BallaratBloke81 said:
I have given it privileges. But when I open supersu says there is something wrong with su binary.
Click to expand...
Click to collapse
Have you deleted then given Super SU privileges back? I find installing a new rom can sometimes screw with them....
ultramag69 said:
Have you deleted then given Super SU privileges back? I find installing a new rom can sometimes screw with them....
Click to expand...
Click to collapse
When I first got the phone it had a rom full of provider bloatware. I flashed another stock Roma to get rid of it. Then I flashed xnote and decided OT wasn't for me, so I went back to stock (without bloats)
BallaratBloke81 said:
When I first got the phone it had a rom full of provider bloatware. I flashed another stock Roma to get rid of it. Then I flashed xnote and decided OT wasn't for me, so I went back to stock (without bloats)
Click to expand...
Click to collapse
Delete the apps from SU then when prompted give them permission again - like normal you will need to re-open them again and get the "Grant root access" prompt from SU...This may work, has for me everytime...
Only other thing I would do if this didn't work would be re-stock and start from scratch...
ultramag69 said:
Delete the apps from SU then when prompted give them permission again - like normal you will need to re-open them again and get the "Grant root access" prompt from SU...This may work, has for me everytime...
Only other thing I would do if this didn't work would be re-stock and start from scratch...
Click to expand...
Click to collapse
Yes hello, can someone please upload the note 3 4.3 touchwiz apk, i accidentally deleted mine, so please.
ultramag69 said:
Delete the apps from SU then when prompted give them permission again - like normal you will need to re-open them again and get the "Grant root access" prompt from SU...This may work, has for me everytime...
Only other thing I would do if this didn't work would be re-stock and start from scratch...
Click to expand...
Click to collapse
I have already reflashed stock back to my phone, re rooted and the problem still exsists
Currently I'm on stock again (downloaded from sammobile)
Every time I open superSU, it tells me there is a problem with the SU BINARY (when I was rooted. I'm not trying to use super SU unrooted lol)
Just rooted again and its still the same...
Reflash stock, full wipe from stock recovery, reroot.
Or u have done a full wipe from stock recovery after flash stock firmware?
Sent from N9005, somewhere on this earth.
antique_sonic said:
Reflash stock, full wipe from stock recovery, reroot.
Or u have done a full wipe from stock recovery after flash stock firmware?
Sent from N9005, somewhere on this earth.
Click to expand...
Click to collapse
Yeah, done all of that. Is there a way to manually wipe the SU binary and reinstall? The root checker app says root access is allowed
Is there another way to see if it's the SU binary or game killer having issues?
BallaratBloke81 said:
Yeah, done all of that. Is there a way to manually wipe the SU binary and reinstall? The root checker app says root access is allowed
Is there another way to see if it's the SU binary or game killer having issues?
Click to expand...
Click to collapse
If you attempts to fix root access denied on game killer then it won't work. Gamekiller/gamecih/gameguardian doesn't work with android 4.3 and above.
I however tried gamecih with cm based rom last week & it worked
Rosli59564 said:
If you attempts to fix root access denied on game killer then it won't work. Gamekiller/gamecih/gameguardian doesn't work with android 4.3 and above.
I however tried gamecih with cm based rom last week & it worked
Click to expand...
Click to collapse
OK, so you're saying those kind of apps will no longer work?
What about the SU binary issue?
BallaratBloke81 said:
OK, so you're saying those kind of apps will no longer work?
What about the SU binary issue?
Click to expand...
Click to collapse
Its not a superSU issue, guess the dev needs to update the gamekiller app. Do you have root privileges with other root apps?
gee2012 said:
Its not a superSU issue, guess the dev needs to update the gamekiller app. Do you have root privileges with other root apps?
Click to expand...
Click to collapse
Not as of yet. The photo of the warning I posted, comes up when I open SuperSU
BallaratBloke81 said:
Not as of yet. The photo of the warning I posted, comes up when I open SuperSU
Click to expand...
Click to collapse
Try unrooting superSU from the app itself and reflash the latest (1.94 i think) superSU.zip in recovery or with Flashify (if compatible ,Playstore) flash CF Root in downloadmode. Hope that helps.
gee2012 said:
Try unrooting superSU from the app itself and reflash the latest (1.94 i think) superSU.zip in recovery or with Flashify (if compatible ,Playstore) flash CF Root in downloadmode. Hope that helps.
Click to expand...
Click to collapse
I can't even get into the app to unroot
BallaratBloke81 said:
OK, so you're saying those kind of apps will no longer work?
What about the SU binary issue?
Click to expand...
Click to collapse
Your SU binary got issue but yes even you solve it those apps won't work.
Try uninstall it from playstore. There is also flashable supersu
http://download.chainfire.eu/204 but I never use it either or maybe reroot
gee2012 said:
Try unrooting superSU from the app itself and reflash the latest (1.94 i think) superSU.zip in recovery or with Flashify (if compatible ,Playstore) flash CF Root in downloadmode. Hope that helps.
Click to expand...
Click to collapse
ES explorer can't get root access either.
Should I flash superSU.zip straight over the top using recovery? Or is that not a good idea?
Rosli59564 said:
Your SU binary got issue but yes even you solve it those apps won't work.
Try uninstall it from playstore. There is also flashable supersu
http://download.chainfire.eu/204 but I never use it either or maybe reroot
Click to expand...
Click to collapse
I have unrooted (flashing stock rom using recovery) and rerooted (using CF auto root... Or whatever it's called) many times.
Who knew it would be that simple? Towelroot has rooted my Note 3, I'm finally back with Titaniuam Backup Pro and Knox is 0x0!
Amazing.
However I've installed CF's SuperSU and it fails to update the binaries.
I've frozen KNOX in Titanium and rebooted but they still won't update.
Do I even need to update them?
Also, if I try to install CWM will that trip KNOX?
jonboyuk said:
Who knew it would be that simple? Towelroot has rooted my Note 3, I'm finally back with Titaniuam Backup Pro and Knox is 0x0!
Amazing.
However I've installed CF's SuperSU and it fails to update the binaries.
I've frozen KNOX in Titanium and rebooted but they still won't update.
Do I even need to update them?
Also, if I try to install CWM will that trip KNOX?
Click to expand...
Click to collapse
Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip . Don't flash it. Unzip it. Then go to /common folder and install superuser.apk. Run SuperSU from App Drawer, and let binary to update. Now you have it working. And don't worry about disabling KNOX. Just disable it.
By flashing CWM you will trip knox.
alexpowermetal said:
Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip . Don't flash it. Unzip it. Then go to /common folder and install superuser.apk. Run SuperSU from App Drawer, and let binary to update. Now you have it working. And don't worry about disabling KNOX. Just disable it.
By flashing CWM you will trip knox.
Click to expand...
Click to collapse
Fantastic. thank you Alex. That worked perfectly. As you're in the know I'll ask you another question (or two)!
Because I don't want to trip knox I won't install CWM. As such I can't make a nandroid backup. I want to install the xposed framework and Wanam modules...but it strongly recommends a backup. Is it risky for me to do this?
Any idea what happens when an OTA update is release by Samsung?
jonboyuk said:
Fantastic. thank you Alex. That worked perfectly. As you're in the know I'll ask you another question (or two)!
Because I don't want to trip knox I won't install CWM. As such I can't make a nandroid backup. I want to install the xposed framework and Wanam modules...but it strongly recommends a backup. Is it risky for me to do this?
Any idea what happens when an OTA update is release by Samsung?
Click to expand...
Click to collapse
I took the yolo approach and installed xposed and wanam with no problems. As you say don't want to risk loosing warranty but knox is still fine and now I have a customisable phone.
No idea about ota samsung update sorry.
pjtb said:
I took the yolo approach and installed xposed and wanam with no problems. As you say don't want to risk loosing warranty but knox is still fine and now I have a customisable phone.
No idea about ota samsung update sorry.
Click to expand...
Click to collapse
Hahaha, I too have just taken the YOLO approach (as much as I hate that phrase!). Thanks mate!
jonboyuk said:
Hahaha, I too have just taken the YOLO approach (as much as I hate that phrase!). Thanks mate!
Click to expand...
Click to collapse
Actually you can make nandroid backup without costume recovery. Just use Online Nandroid Backup. It makes nandroid backup in CWM or TWRP formats.
And then you can use Nandroid Manager to restore your backup. Although I still can't figure it out on how to restore a backup if you soft brick you phone.
alexpowermetal said:
Actually you can make nandroid backup without costume recovery. Just use Online Nandroid Backup. It makes nandroid backup in CWM or TWRP formats.
And then you can use Nandroid Manager to restore your backup. Although I still can't figure it out on how to restore a backup if you soft brick you phone.
Click to expand...
Click to collapse
Cheers, not heard of that before. I'll have to look into it!
alexpowermetal said:
Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip . Don't flash it. Unzip it. Then go to /common folder and install superuser.apk. Run SuperSU from App Drawer, and let binary to update. Now you have it working. And don't worry about disabling KNOX. Just disable it.
By flashing CWM you will trip knox.
Click to expand...
Click to collapse
Not quite sure what to do here. I've ODINed twice and just tried this approach, but I cannot get the binaries to update successfully. I keep getting the failure. Any ideas?
danjng said:
Not quite sure what to do here. I've ODINed twice and just tried this approach, but I cannot get the binaries to update successfully. I keep getting the failure. Any ideas?
Click to expand...
Click to collapse
Now you can install SuperSU from play store as it was updated and now it should update binaries without a problem. Install SuperSU, open it, press "update binaries", use "normal" method (not CWM/TWRP), when it will ask you to disable knox, press "disabled knox" and then reboot.
I'm having a similar issue that's pretty frustrating. I root my phone and install supersu, asks to disable knox and everything works great until about a day after, I try to open Supersu and it says I need to update binaries but it will not update. So I have to uninstall supersu, root again then install Supersu again! Right now it's working fine but I'm scared to open Supersu in fear that it will happen all over again. It's been a pain! I even tried flashing the supersu zip through Safestrap to see if it helps but it did the same thing. Is anyone having a similar issue or can anyone help with this?
alexpowermetal said:
Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip . Don't flash it. Unzip it. Then go to /common folder and install superuser.apk. Run SuperSU from App Drawer, and let binary to update. Now you have it working. And don't worry about disabling KNOX. Just disable it.
By flashing CWM you will trip knox.
Click to expand...
Click to collapse
Isn't the point of using towelroot to prevent tripping KNOX? When trying to update my SuperSU binaries it asks me to disable KNOX, won't this trip it?
toews said:
Isn't the point of using towelroot to prevent tripping KNOX? When trying to update my SuperSU binaries it asks me to disable KNOX, won't this trip it?
Click to expand...
Click to collapse
As far as I understand, it disables software part of knox, so it (knox) wont prevent you to update binaries. Anyway it won't trip knox.
Binary issue
fsolares said:
I'm having a similar issue that's pretty frustrating. I root my phone and install supersu, asks to disable knox and everything works great until about a day after, I try to open Supersu and it says I need to update binaries but it will not update. So I have to uninstall supersu, root again then install Supersu again! Right now it's working fine but I'm scared to open Supersu in fear that it will happen all over again. It's been a pain! I even tried flashing the supersu zip through Safestrap to see if it helps but it did the same thing. Is anyone having a similar issue or can anyone help with this?
Click to expand...
Click to collapse
I have the same problem with binary issues on the towelroot method. It works at first but after a reboot it says "Update binary files" So i do that and then it says "Failed" I have the verizon Note 3 on 4.4.2. I found a temp fix for this when having issues with binary update. You don't have to re-root your phone.
1. Save the apk super su to your phone.
2. After having problems with binary then uninstall the supersu app from your phone
3. Install the supersu apk using "ES File Explorer" Then load the app it'll still say failed.
4. Reboot the phone and open up Supersu and you won't get the binary issue
I know its annoying work around but its what i have figured out and it works.
Guys, can you help with 2 questions please?
I have a I9505 with 4.4.2 branded rom (ZTO) with towel root (know still 0x0) and disable OTA updates, I can't find a perfect custom rom (always a feature not working, missing or the interface it's a mess/colorfull), now I just want the stock unbranded rom.
1 - What is the safest way to flash the stock rom without trip knox?
2- After that, can I enable back OTA updates with root?
Thanks!
fsolares said:
I'm having a similar issue that's pretty frustrating. I root my phone and install supersu, asks to disable knox and everything works great until about a day after, I try to open Supersu and it says I need to update binaries but it will not update. So I have to uninstall supersu, root again then install Supersu again! Right now it's working fine but I'm scared to open Supersu in fear that it will happen all over again. It's been a pain! I even tried flashing the supersu zip through Safestrap to see if it helps but it did the same thing. Is anyone having a similar issue or can anyone help with this?
Click to expand...
Click to collapse
Why are you re-rooting?
---------- Post added at 03:01 PM ---------- Previous post was at 02:57 PM ----------
jashton23 said:
I have the same problem with binary issues on the towelroot method. It works at first but after a reboot it says "Update binary files" So i do that and then it says "Failed" I have the verizon Note 3 on 4.4.2. I found a temp fix for this when having issues with binary update. You don't have to re-root your phone.
1. Save the apk super su to your phone.
2. After having problems with binary then uninstall the supersu app from your phone
3. Install the supersu apk using "ES File Explorer" Then load the app it'll still say failed.
4. Reboot the phone and open up Supersu and you won't get the binary issue
I know its annoying work around but its what i have figured out and it works.
Click to expand...
Click to collapse
Same phone and carrier. Thanks for this. :good:
alexpowermetal said:
Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip . Don't flash it. Unzip it. Then go to /common folder and install superuser.apk. Run SuperSU from App Drawer, and let binary to update. Now you have it working. And don't worry about disabling KNOX. Just disable it.
By flashing CWM you will trip knox.
Click to expand...
Click to collapse
I downloaded SuperSU from the link your provided, copied just the superuser.apk from /common folder to my Note 3 and then install.
Run SuperUser, which asked to disable KNOX (I clicked OK). KNOX disabled.
However, there is no prompt for the binary update. Am I doing anything wrong?
you could also flash the zip with mobile odin pro (available in play store)
*flies away*
Sent from my SM-N9005 using XDA Premium 4 mobile app
Killberty said:
you could also flash the zip with mobile odin pro (available in play store)
*flies away*
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wouldn't this require TWRP? I don't have that, since installing TWRP will trip KNOX.
Mod Edit quote removed
and i just told u another method man...
i am not tired of it, i enjoy helping people, giving back support i once recieved myself when i was a noob
but if i post something, you should read it, and maybe you are even smart enough to type in "mobile odin pro" in that play store instead of just commenting - if you had done that, you'd have seen that no custom recovery is required for flashing
Sent from my SM-N9005 using XDA Premium 4 mobile app
Mod Edit
Thread cleaned
If you want to help users , great.
If you do not want to help users , that is also fine.
But there is no need to insult each other.
Please respect the XDA RULES
Thank you
malybru
Forum Moderator
So I just got done rooting my Note 3 with towelroot and everything went fine. I checked to make sure it worked with "Root Checker" and it said I successfully had root access. So next step I took was to download a SuperUser app from the PlayStore, and no matter WHAT SuperUser app I use, NONE of them can update the SU Binary????? so I went and downloaded "Busybox Installer" and downloaded the latest Busybox version to my Note. Then went back to retry to update the Binary but still no progess!! I'm stuck and I really don't know what else to do! I'm not trying to install any ROM or Safestrap. Just want my phone rooted to mess around with some permissions and hacked apks. So can someone please tell me what I'm doing wrong???? I've rebooted my Note COUNTLESS number of times and still SuperSU still says it fails to update the Binary! It successfully disable KNOX tho. So what can I do so that I can use my root to my full potential and update the SU Binary???
RECKLESS PAIN said:
So I just got done rooting my Note 3 with towelroot and everything went fine. I checked to make sure it worked with "Root Checker" and it said I successfully had root access. So next step I took was to download a SuperUser app from the PlayStore, and no matter WHAT SuperUser app I use, NONE of them can update the SU Binary????? so I went and downloaded "Busybox Installer" and downloaded the latest Busybox verizon to my Note. Then went back to retry to update the Binary but still no progess!! I'm stuck and I really don't know what else to do! I'm not trying to install any ROM or Safestrap. Just want my phone rooted to mess around with some permissions and no hacked apks. So can someone please tell me what I'm doing wrong???? I've rebooted my Note COUNTLESS number of times and still SuperSU still says it fails to update the Binary! It successfully disable KNOX tho. So what can I do so that I can use my root to my full potential and update the SU Binary???
Click to expand...
Click to collapse
I'm pretty sure I've read somewhere that its just a problem with towelroot.. And that same thing happened to me on my note 3. I'm pretty sure what I did was download safestrap (you can I install it after) http://forum.xda-developers.com/showthread.php?t=2517610 and flash this (chainfires supersu +binary) http://forum.xda-developers.com/showthread.php?t=2517610
If that doesn't work just either pm me or comment that it didn't and I'll see if I can find another way! And you can always uninstall safestrap once you flashed the package (don't forget to clear cache and dalvic)
Sent from my GalaxyAwesome
recovery locked ----boooo!
RECKLESS PAIN said:
So I just got done rooting my Note 3 with towelroot and everything went fine. I checked to make sure it worked with "Root Checker" and it said I successfully had root access. So next step I took was to download a SuperUser app from the PlayStore, and no matter WHAT SuperUser app I use, NONE of them can update the SU Binary????? so I went and downloaded "Busybox Installer" and downloaded the latest Busybox verizon to my Note. Then went back to retry to update the Binary but still no progess!! I'm stuck and I really don't know what else to do! I'm not trying to install any ROM or Safestrap. Just want my phone rooted to mess around with some permissions and no hacked apks. So can someone please tell me what I'm doing wrong???? I've rebooted my Note COUNTLESS number of times and still SuperSU still says it fails to update the Binary! It successfully disable KNOX tho. So what can I do so that I can use my root to my full potential and update the SU Binary???
Click to expand...
Click to collapse
clarify your Super user app from google play is 1.99r4 ....you should check THIS thread for latest SuperSu app (2.00)
http://forum.xda-developers.com/showthread.php?t=1538053
keep in mind Vzw recovery is locked, you cannot flash files on stock rom.
SS will relieve big headaches....so install it.
check upload... you get one free today
:good:
Once rooted with towelroot, I uninstalled the towelroot app. After the next reboot, SuperSU was not complaining anymore for me.
Thanks for all the help! Got it up and running in no time!
RECKLESS PAIN said:
Thanks for all the help! Got it up and running in no time!
Click to expand...
Click to collapse
What fixed your issue?
drewcam888 said:
What fixed your issue?
Click to expand...
Click to collapse
I put Safe strap on and installed it, then updated the SU Binary through custom recovery via SafeStrap.
RECKLESS PAIN said:
I put Safe strap on and installed it, then updated the SU Binary through custom recovery via SafeStrap.
Click to expand...
Click to collapse
I did the above but after opening supersu it still asks to update bibary and then fails
drewcam888 said:
I did the above but after opening supersu it still asks to update bibary and then fails
Click to expand...
Click to collapse
Did you try flashing the files he put for the Superuser + binary in Safestrap? Also do you got the latest busy box installed????
RECKLESS PAIN said:
Did you try flashing the files he put for the Superuser + binary in Safestrap? Also do you got the latest busy box installed????
Click to expand...
Click to collapse
Yes to both. Tried flashing multiple times
Any further suggestions from anyone?
drewcam888 said:
Any further suggestions from anyone?
Click to expand...
Click to collapse
Download the flashable zip of supersu. Then instead of flashing, go to the Commons folder inside it and extract the apk. Install it and then run it from app drawer.
K03WL3R said:
Download the flashable zip of supersu. Then instead of flashing, go to the Commons folder inside it and extract the apk. Install it and then run it from app drawer.
Click to expand...
Click to collapse
This just prompts SU binary update and fails.
I managed to download safestrap and have the su zip in my downloads, but dont knwo where to go from here.
I also don't use anything but stock ROM, won't I trip KNOX by flashing my stock?
First time rooting so I probably shouldn't play around with things alone. Thanks
jinh0o said:
This just prompts SU binary update and fails.
I managed to download safestrap and have the su zip in my downloads, but dont knwo where to go from here.
I also don't use anything but stock ROM, won't I trip KNOX by flashing my stock?
First time rooting so I probably shouldn't play around with things alone. Thanks
Click to expand...
Click to collapse
No you won't trip knox flashing is safe in safestrap!
K03WL3R said:
No you won't trip knox flashing is safe in safestrap!
Click to expand...
Click to collapse
Still not downloading the binary. Now I can't even uninstall it through drawer, did the flash make it a system app?
I think I should've uninstalled it before the flash.
jinh0o said:
Still not downloading the binary. Now I can't even uninstall it through drawer, did the flash make it a system app?
I think I should've uninstalled it before the flash.
Click to expand...
Click to collapse
It might've, sorry but I'm not clear on what I did..(I think I just flashed a rom) Just go to system/app and see if it's there. Delete it and reflash.
---------- Post added at 08:58 PM ---------- Previous post was at 08:35 PM ----------
And here is the version of superSU from when towel root first came out. http://download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip
Helpppppppp
I rooted my phone with ODIN - chainfire CF-Root
After 5 minutes my root is broken !
Now ! i can't update supersu ! installtion failed !
i can't uninstall supersu or full unroot to ROOT my device again !!!
* update it from recovery ,not worked !
** delet it from recovery and root browser ! NOT WORKED
*** re-install not worked too.
Build Number : XXUGBOJ1 - Android 5
can anyone help me !?
Note 3 N9005 3G & LTE
alishirazy said:
I rooted my phone with ODIN - chainfire CF-Root
After 5 minutes my root is broken !
Now ! i can't update supersu ! installtion failed !
i can't uninstall supersu or full unroot to ROOT my device again !!!
* update it from recovery ,not worked !
** delet it from recovery and root browser ! NOT WORKED
*** re-install not worked too.
Build Number : XXUGBOJ1 - Android 5
can anyone help me !?
Note 3 N9005 3G & LTE
Click to expand...
Click to collapse
The N9005 is not a Verizon phone, this forum is about the Verizon Note 3, SM-900V
Sent from my Note 3 via Tapatalk
So, i tried to Root my GF's I9506 with CF-Autoroot.
Safteynet fails and PokemonGo doesn't work, login problems.
I Unrooted trough SuperSU, restarted the phone a couple of times but PoGo still wont login.
She's on Stock Samsung Rom with Stock Recovery.
What can i do?
I was able to Re-Root with SuperSU for some reason. Had to update the binary tho. That's strange...
Shouldnt work if SuperSU unrooted in the first place?
Maybe it leaves files behind. If you're interested, there are ways to hide root from the game.
Anyway, the only sure way to remove root would probably be the flashing of a stock ROM.
Pwnycorn said:
Maybe it leaves files behind. If you're interested, there are ways to hide root from the game.
Anyway, the only sure way to remove root would probably be the flashing of a stock ROM.
Click to expand...
Click to collapse
Hmm. She really dosen't want to do a factory reset. so i guess i have to hide it then..
I think there are a few options i think all of them needs another recovery though:
Magisk + Magiskhide + phh
SuperSu, Suhide
Something called iSu.
Might it help to root again, remove anu "Su" files and folders trough ES Filexplorer? Then unroot from SuperSu?
If the phone is running a stock ROM, flashing a stock ROM usually leaves all of the data intact.
Dallebull85 said:
Hmm. She really dosen't want to do a factory reset. so i guess i have to hide it then..
I think there are a few options i think all of them needs another recovery though:
Magisk + Magiskhide + phh
SuperSu, Suhide
Something called iSu.
Might it help to root again, remove anu "Su" files and folders trough ES Filexplorer? Then unroot from SuperSu?
Click to expand...
Click to collapse
Removing any root file live might break root, which in turn won't let you remove any of the other files left.
Besides, you don't even know what files to look for.
Having a custom recovery won't affect her usage of the phone, nor the game. Besides, it gives you the benefit of making a Nandroid backup.
Ty for all the answers. So a custom Recovery doesn't trigger Saftynet?
Might as well install TWRP, backup and try to reflash stock rom from there.
Samsung Galaxy S4 International Qualcomm (jfltexx)
Samsung Galaxy S4 LTE Advanced i9506 (ks01lte)
Which one? i suppose its the 9506, flashhing my old CF-autoroot for my 9505(jfltexx) didn't work.
To flash a stock ROM, you need Odin, Samsung phone drivers, and the stock ROM from sammobile.com.
OK. But i'll do a backup on twrp first. Ty ty
Fixed it! Reflashed stock Rom with Odin and now Pogo works again!
Ty a lot for all the help. you guys are the best!