Database Users

somebody help me please!!

i recently rooted my gti9505 but then i tried to put the stock firmware back on my phone. but halfway through the process in odin it came up that it failed with the message sayin Complete(write) failed so i unplugged it and now when i turn it on it jus send me straight to a screen that says firmware upgrade problem boot into recovery using kies (i obviously cant use kies as i have rooted my handset already.. is there any1 out there that can help me get me phone back to stock
i will b eternally gratful as my phone is jus and expensive paprwieght atm

darrellj1988 said:
i recently rooted my gti9505 but then i tried to put the stock firmware back on my phone. but halfway through the process in odin it came up that it failed with the message sayin Complete(write) failed so i unplugged it and now when i turn it on it jus send me straight to a screen that says firmware upgrade problem boot into recovery using kies (i obviously cant use kies as i have rooted my handset already.. is there any1 out there that can help me get me phone back to stock
i will b eternally gratful as my phone is jus and expensive paprwieght atm
Click to expand...
Click to collapse
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original.
- Try another Odin version.
- Uninstall and re-install driver.
- Try other computer.

thanks for the advice but i have just tried all the 1's you have told me (except the change computer as i dont have access to another computer) and i still says failed.. it still says firmware upgrade encountered do u think there is anything else i can do?

darrellj1988 said:
thanks for the advice but i have just tried all the 1's you have told me (except the change computer as i dont have access to another computer) and i still says failed.. it still says firmware upgrade encountered do u think there is anything else i can do?
Click to expand...
Click to collapse
you may have a bad stock firmware download. Try downloading the files again.
pull out your battery for a couple of minutes. then retry with odin
if you can access another pc, it is good to try.
out of options.

Can't update to Android 4.3

Hi guys,
I can't update to Android 4.3. When I download the update via OTA and reboot the phone to install it, I always get an error at exactly 26% while installing it. Of course after that I get a notification that I should try with Kies, which in my case hasn't worked even once in a thousand tries (except sometimes with wi-fi, but it's useless since I can't update the firmware). I don't even remember how many times I deleted and installed the drivers all over again. I've tried updating via the Recovery boot, no luck. I tried 100 times with Odin and different versions of it, no luck with that either. It just won't start or I get the message <ID:0/009> Complete(Write) operation failed. I even ran at as administrator and deactivated my antivirus and Kies while I was trying. I downloaded the firmware twice from sammobile just to be sure it wasn't corrupted. I've tried with different ports - nothing. Also with 32 and 64 bit Windows 7 - nada. I don't know what else to try.
Samsung Galaxy S4 LTE GT-I9505
Carrier: T-Mobile Macedonia (MBM)
Android. 4.2.2 (I9505XXUDMH7)

FrankCastiglione said:
Hi guys,
I can't update to Android 4.3. When I download the update via OTA and reboot the phone to install it, I always get an error at exactly 26% while installing it. Of course after that I get a notification that I should try with Kies, which in my case hasn't worked even once in a thousand tries (except sometimes with wi-fi, but it's useless since I can't update the firmware). I don't even remember how many times I deleted and installed the drivers all over again. I've tried updating via the Recovery boot, no luck. I tried 100 times with Odin and different versions of it, no luck with that either. It just won't start or I get the message <ID:0/009> Complete(Write) operation failed. I even ran at as administrator and deactivated my antivirus and Kies while I was trying. I downloaded the firmware twice from sammobile just to be sure it wasn't corrupted. I've tried with different ports - nothing. Also with 32 and 64 bit Windows 7 - nada. I don't know what else to try.
Samsung Galaxy S4 LTE GT-I9505
Carrier: T-Mobile Macedonia (MBM)
Android. 4.2.2 (I9505XXUDMH7)
Click to expand...
Click to collapse
is this the firmware you are trying to flash : I9505XXUEMKF?
are you using odin 3.09?

FrankCastiglione said:
Hi guys,
I can't update to Android 4.3. When I download the update via OTA and reboot the phone to install it, I always get an error at exactly 26% while installing it. Of course after that I get a notification that I should try with Kies, which in my case hasn't worked even once in a thousand tries (except sometimes with wi-fi, but it's useless since I can't update the firmware). I don't even remember how many times I deleted and installed the drivers all over again. I've tried updating via the Recovery boot, no luck. I tried 100 times with Odin and different versions of it, no luck with that either. It just won't start or I get the message <ID:0/009> Complete(Write) operation failed. I even ran at as administrator and deactivated my antivirus and Kies while I was trying. I downloaded the firmware twice from sammobile just to be sure it wasn't corrupted. I've tried with different ports - nothing. Also with 32 and 64 bit Windows 7 - nada. I don't know what else to try.
Samsung Galaxy S4 LTE GT-I9505
Carrier: T-Mobile Macedonia (MBM)
Android. 4.2.2 (I9505XXUDMH7)
Click to expand...
Click to collapse
OTA gives a lot of failures. You need to install it by Odin:
1. Here is your new 4.3 Rom. Download it and unzip/unrar it (first listed rom, you must register): http://www.sammobile.com/firmwares/1/?model=GT-I9505&pcode=MBM#firmware
2. Install kies 3 to be sure latest drivers are installed.
3. Download odin 3.09 (don't use prior versions even you had read it works)
4. If you have a diferent usb cable from stock white data cable, better use it.
5. With the phone off, push pwr+home+vol down for some seconds to enter in odin mode, then push vol up to confirm.
6. Open odin, put in AP box the unziped rom (.tar.md5)
Connect the data cable and you will see odin recognizes it.
7. Flash the rom (start button). Don't touch anything till it restarts.
Enviado desde mi GT-P7510 usando Tapatalk 2

Thanks for the replies guys!
It won't start. I did everything, over and over again.

Try to change the usb port.

I found out that if you turn on Kies while Odin is up you can jump-start it ....now every now and then I have to turn on - turn off Kies so Odin can continue xD

It got stuck at the system file... I don't know what's the matter but the only time something happens in Odin is when the loading screen from kies shows up...right before kies starts.

Damn... Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. And Kies is not connecting :/

FrankCastiglione said:
I found out that if you turn on Kies while Odin is up you can jump-start it ....now every now and then I have to turn on - turn off Kies so Odin can continue xD
Click to expand...
Click to collapse
Don't start kies! I wrote just to install version 3 so that to be sure to install last s4 drivers. Don't execute kies!
Did you followed my advice on step 4 (use a different data cable). Also, if you have a desktop, use rear usb ports instead of front usb port.
Enviado desde mi GT-P7510 usando Tapatalk 2

I tried everything and every single instruction I have found. The only way something moves in Odin and my phone is during the loading screen for Kies. When Kies opens nothing happens. I have to turn on and off Kies over and over again so I can get some progress. When I open Kies there are three things that show up in Task Manager (besides Kies). Only the dllhost.exe - COM Surrogate appears only briefly and disappears when Kies is open. I think some of these tasks have something to do with my problem. Either they are allowing or stopping something for a moment to get through to Odin.

FrankCastiglione said:
I tried everything and every single instruction I have found. The only way something moves in Odin and my phone is during the loading screen for Kies. When Kies opens nothing happens. I have to turn on and off Kies over and over again so I can get some progress. When I open Kies there are three things that show up in Task Manager (besides Kies). Only the dllhost.exe - COM Surrogate appears only briefly and disappears when Kies is open. I think some of these tasks have something to do with my problem. Either they are allowing or stopping something for a moment to get through to Odin.
Click to expand...
Click to collapse
I see on first screen odin works fine without opening kies... Why are you opening kies? If you have kies open while using odin, it will necessary fail.
Otherwise, if you are saying odin only work while opening kies, you must change the process to a different pc, and also it would better to use a different data cable.
Enviado desde mi GT-I9500 usando Tapatalk 2

These screens are after two hours of turning on and off Kies. I just wanted to show you how I get progress in Odin. Anyway, I gave up this morning after spending way too many hours on this. I tried everything. I tried every single port on my PC, different data cable, re-installing Kies and the drivers, restarts, different PCs, different OS, different versions of Odin and I don't know what else. I just had enough. I went few hours ago to the T-Mobile store and gave the phone for service, since I still have the warranty they will probably fix it. We'll see in about 10 days.

FrankCastiglione said:
These screens are after two hours of turning on and off Kies. I just wanted to show you how I get progress in Odin. Anyway, I gave up this morning after spending way too many hours on this. I tried everything. I tried every single port on my PC, different data cable, re-installing Kies and the drivers, restarts, different PCs, different OS, different versions of Odin and I don't know what else. I just had enough. I went few hours ago to the T-Mobile store and gave the phone for service, since I still have the warranty they will probably fix it. We'll see in about 10 days.
Click to expand...
Click to collapse
I see, you tried everything. You did well taking it to sat. Good luck.
Enviado desde mi GT-I9500 usando Tapatalk 2

HELP: I bricked my Note 3 (N900). Forget to enable USB debugging before flashing!

I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.

boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
make sure kies is not running then try odin again

jaythenut said:
make sure kies is not running then try odin again
Click to expand...
Click to collapse
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.

boycam said:
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
Click to expand...
Click to collapse
Usb debugging has nothing to do with it failing when you're using odin. Try a different version of odin.

A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.

boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.

if all of those step fail..
try to flash ur rom on other computer or laptop
Sent from my SM-N900 using XDA Premium 4 mobile app

radicalisto said:
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
Click to expand...
Click to collapse
Thankx man itis worked:good::good:

jdomadia said:
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
Click to expand...
Click to collapse
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.

markap99 said:
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
Click to expand...
Click to collapse
You've indeed saved my day... I've been searching high and low, installing various versions of Odin3, downloading tonnes of tar, tarmd5, zip, etc.!
Pardon me for my ignorance, but I never intended to root my cell phone in the first place. I was merely following what Kies suggested, "A New Firmware, Wanna Upgrade?" Oh, truly? Gee, thanks! And **** it, it screwed up my GT-N7000, saying "Firmware upgrade encountered an issue..." and my cell phone never saw the daylight again, regardless how I started it, factory-reset mode wasn't possible at all, only download mode could be started up. Tried with various methods of Odin3 on multiple ROMS, to no avail, until I read your short reply. BAM! (As you put it...)
Thanks a bunch, mate!

I have a similar issue with my sm n900. Lost my imei and baseband, i needed to flash a custom rom to get my baseband before working on the imei, after flashing via odin phone boots to samsung logo then goes blank. And recovery says E failed to mount efs . But i need to use adb on my pc. So how can i possibly enabe usb debugging in order for adb to find my device?

Flashing a stock ROM from sammobile.com via Odin does not require USB debugging. Flashing a stock ROM will flash everything, including modem, bootloader, and recovery.

My N900 Bricked
I am unable to Go to download mode not even the charging symbol too
no Luck at all phone is not starting need a Unbrick or help me how to get it sorted
galaxy Note 3 Sm N900
Tried to open the phone to short the wire but the shorting mentioned in all the imagees doesnt match the design of the phone internal
can some one tell me which points to short to start the phoen in Ext sd mode
or any help would help

[Q] Did I just brick my s4?

Hi, I have a rooted galaxy s4 LTE with android 4.3, and was going to update to 4.4.2 via odin 3.09, but during the middle of the installation, I heard a usb disconnection sound, and a red light saying fail appeared on odin. I waited a while, but nothing, and when I restarted my phone, I got that message "firmware upgrade encountered an issue. please select recovery mode in kies and try again" with some odin console messages on top.
I don't know why I can't recover with kies, nothing shows up on the list, and I tried to flash again with odin, using the same rom, but it failed.
what should I do?
I downloaded the official rom from sammobile.
thanks in advance

fael097 said:
Hi, I have a rooted galaxy s4 LTE with android 4.3, and was going to update to 4.4.2 via odin 3.09, but during the middle of the installation, I heard a usb disconnection sound, and a red light saying fail appeared on odin. I waited a while, but nothing, and when I restarted my phone, I got that message "firmware upgrade encountered an issue. please select recovery mode in kies and try again" with some odin console messages on top.
I don't know why I can't recover with kies, nothing shows up on the list, and I tried to flash again with odin, using the same rom, but it failed.
what should I do?
I downloaded the official rom from sammobile.
thanks in advance
Click to expand...
Click to collapse
i had the same problem before! it was the usb ports in my pc ! i changed pc, i used my laptopt and everything were ok! just test another usb port or another pc using odin and original rom and everything should be ok! Dont panic ur phone is ok
remember always to run odin as administrator

hey! yeah, apparently it was those front usb ports, both of them weren't working properly, when I connected to another usb behind the computer it worked fine installing the same rom through odin.
phew!
thanks

[Q] Samsung galaxy core 2 sm-g3555h updated failed via otp! cannot enter recovery!

my phone Samsung galaxy core 2 sm-g355h started updating! when getting in 95% of updating have stopped with the message error! so from now and then my phone restarts and try again to reinstall the update with the same result!! can't insert in recovery mode because it's starts again the upadating!! so my phone is dead and cannot do anything! even with odin i have tried to install a stock rom and cannot do it! it say's tha cannot open com port! althought odin see's the phone!! i have been dissapointed!! the only sollution that remain's to me is to pay a visit in samsung's dealer!! Do you have any idea?
:crying:

I had the same problem with this device... I had to flash stock rom with odin.
Just install kies and open it. Then reinstall usb driver through kies and then try flashing stock rom with odin, it will surely work. So good luck with that.

updating via ota isnt much good follow kies or stores

did you fix it? if yes how? I have the same problem

The best thing about samsung is Samsung Kies. There is a emergency firmware recover or something of that kind, I dont remember the name. Just install it and connect your device to it. It will try to recover your phone

go to a mobile center