Database Users

Why in My GalY not work the JellyBlast CosROM ?

Hi ,, all
Do you can Help me ?
My GalY is not Work , Flashing the ROM Jelly Blast ?
I Following step by step the tutorial in the Page Official and all step the result is bootloop
step by step from me ?
- The First me Flash the Stock Rom from ODIN .
- after that I Flash The JellyBlast Rom via CWM
- i'm wait wait wait 10 minute and the result is BOOTLoop
please someone user can Help me ?
my Gal Y is BootLoop and I want Installed the JBRom .
Sorry for I Can't English

You need to do a full data wipe and cache wipe before flashing the rom. Please read the instructions carefully.
||I'm just a PM away for help||

I have tried over and over again ..
Sorry For English ..

NearLighting said:
I have tried over and over again ..
Sorry For English ..
Click to expand...
Click to collapse
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.

samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
FYI, rooting isn't necessarily required for flashing roms. All custom roms so far are pre-rooted.
||I'm just a PM away for help||

Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.

samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
Use Root or Deodex ROM ? DEODEX include the Root .. ?
hitme987 said:
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
Click to expand...
Click to collapse
Stock Recovery ? why not CWM ?
Sorry Bad English .

try wipe data/reset, wipe cache partition, in advanced mode wipe dalvik cache, then flash jellyblast
Sent from my GT-S5360

After flashing stock rom u should root ur phone nd den flash any rom
U can install creeds 3.5 on ur phone without root
Its d only rom which u can install without root
Sent from my GT-S5360 using xda premium

No it nlot. I installed hype gm without root!!
Sent from my GT-S5360 using xda app-developers app

NearLighting said:
Use Root or Deodex ROM ? DEODEX include the Root .. ?
Stock Recovery ? why not CWM ?
Sorry Bad English .
Click to expand...
Click to collapse
Root your phone. If already rooted, proceed to the next step.
Make sure that you're on Stock kernel.
If your'e NOT on Stock kernel, either flash stock kernel, or open the JELLYBLASTV3.signed.zip on your pc, delete boot.img from it, and then flash the zip. In that way, you'll be able to use ANY kernel you already have.
Switch off your phone.
Go to Clockwork mode. This is important, because CWM is necessary, or you won't be able to boot up with the new Kernel.
Use the volume keys to move up and down.
Wipe data and cache
Now choose: Install zip from sd card.
Choose JELLYBLAST V3.signed.zip
Choose "yes"
It will be Installed. Now reboot your phone. First boot will take time. Be patient.
If you have followed EVERYTHING above carefully, you will soon boot up to your new rom.
Please wait until media scanning is completed.
Enjoy!!!

[GUIDE] [EASY] Dual Booting LOLLIPOP with KK/JB ROM's [GT-I9100][Noob Friendly]

Welcome to the NOOB Friendly GUIDE to DUAL BOOT Lollipop with KitKat/JellyBean Roms on Samsung Galaxy S2!!
We have been fortunate enough to have 2 Working Lollipop Rom's (CM 12 and Omni 5.0) so I present to you the Guide on how to Dual Boot them with Kitkat/JB ROMs
Prerequisites :
1) Need Atleast 2.5 GB free on Internal Storage
2) Download the 1st Rom( LOLLIPOP - Primary Rom) and save it on any storage on your phone
3) Download Dorimanx Test Kernel v10.44.v004 from Here - http://dorimanx.casoncia.org/V10-MA...COMP-mv3-[10-30]-[29-09]-JB-SGII-PWR-CORE.zip
4) Download the 2nd Rom (Kitkat/JB - Secondary Rom) and save it on any storage on your phone
Steps :
1)Make sure you are on a Lollipop Compatible Recovery
2) Flash your Lollipop ROM (along with GAPPS etc.) you want as your Primary ROM
3) Reboot and check weather the ROM is working fine.
4) Reboot to Recovery
5) Flash Dorimanx v10.44.x004 Kernel you downloaded earlier
6) Go to Reboot Recovery
7) Go to dual boot options in new CWM and select Wipe 2nd ROM data/cache (takes 5-10 minutes)
8) Then select Wipe 2nd ROM dalvik-cache
9) After that Install 2nd ROM from Internal SD card or External SD card and flash the 2nd ROM (Kitkat/JB).
10) Reboot System and Boot to Secondary ROM (Press HOME button on DualBoot Screen)
NOTE : -Now you have both ROM's Installed but for now only 2nd ROM will boot. To see how to boot Lollipop ROM see next post
PLEASE HIT THE THANKS BUTTON :good:
Checkout my other thread for Kitkat/JB Roms Dualboot
Credits :
@nik60 for his thread
@eskriminal and @dorimanx for Kernel
@Troubadour666 for Helping Out/Patches
And any others i forgot to mention
​

Boot to Lollipop Rom :
1) Download and Copy the latest Apolo Kernel Lollipop Version to your phone internal storage
2) Reboot to recovery from your Kitkat/JB ROM
3) In CWM Recovery flash the Apolo Kernel
4)Reboot System and Enjoy your Lollipop ROM
Note : You will have to Repeat these steps everytime you want to change from Kitkat/JB ROM to Lollipop ROM
Boot to Kitkat/JB ROM :
1)Boot into Recovery
2)Flash the Dorimanx Kernel again and Reboot System to boot to Kitkat/JB ROM
Note : You will have to repeat these steps everytime you want to change from Lollipop to Kitkat/JB ROM
​

reserved

LOL
again, dualbooting thread
thanks.

Troubadour666 said:
LOL
again, dualbooting thread
thanks.
Click to expand...
Click to collapse
I didnt want to make the old thread to much full..people will get confused...so i made another thread specifically for Lollipop.. I am sure this will help a lot of users

video review about dualboot
sory, its not branch 10 i used from DorimanX builds, its branch 8, but for ppl, result will be same as describe in OP.
when i made this review, i never though someone will make a thread
link to download this personal omni rom with gapps inside used in video :
omni-5.0-20141202-i9100-HOMEMADE-GAPPS_inside.zip - 267.19 MB
thanks

Omni 5.0 with gapps,it's working? Thanks
Sent from my GT-I9100 using XDA Premium 4 mobile app

Yakap said:
Omni 5.0 with gapps,it's working? Thanks
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://d-h.st/gIf
these gapps work

tip for dualbooters
Hi,
try its a test , i assume you know what you do with your device, if you dualboot, you know that !
For this tweak, on your good 2nd rom , install Nandroid Manager from Store :
https://play.google.com/store/apps/details?id=com.h3r3t1c.bkrestore
tweak details:
if you have a good running lollipop on 1rst rom, then flash your DorimanX kernel with TWRP or ODIN, reboot DorimanX recovery and using it, make a nandroid of your 1rst lollipop rom.
- NOW, with DorimanX kernel, reboot and run your KitKat or JB 2nd rom and ,
- copy nandroid backup from clockworkmod folder on device (int or ext card) to PC ("omni-02122014-2014-12-02.19.02.55" for example) .
- from this nandroid, make an another safe copy in another folder of your PC.
- from folder named "test-omni-02122014-2014-12-02.19.02.55"
- with 7zip , open system.ext4.tar.a and delete all things except build.prop in /system/. close system.ext4.tar.a.
- with 7zip , open data.ext4.tar.a and
in data/data , delete :
com.andrew.apollo
com.bel.android.dspmanager
com.svox.pico
jp.co.omronsoft.openwnn
net.nurik.roman.dashclock
all folder with :
org.omnirom.*
com.android.*
com.cyanogenmod.*
delete contents in data/dalvik-cache/*
delete contents in data/users/*
you can try to clean some other folders if you want.
then close data.ext4.tar.a
- now, copy "test-omni-02122014-2014-12-02.19.02.55" from PC to your device, in same folder as original.
- reboot your 2nd rom again
- run nandroid manager and find your "test-omni-02122014-2014-12-02.19.02.55" in list of backups and tick it
- launch MD5 buton on screen and choose "generate MD5". When done, reboot recovery.
wait for new lollipop build.......
when , one day, one lollipop build appears (CM12 ALPHA, OMNI or CodeRom), then
- with DorimanX recovery, restore the modified nandroid backup "test-omni-02122014-2014-12-02.19.02.55" on your 1rst rom.
- then , go in mount and storage Menu, follow "mount /system" and go to "format system" partition.
- flash the NEW LOLLIPOP Build ROM now and enjoy to find your DATA APPs from precedent LOLLIPOP BUILD INSTALLED.
thanks

Guys if you want i can make Omni Recovery file for you guys...just someone send me the boot.img from latest build...im using bugaaty build

koolkunz said:
Guys if you want i can make Omni Recovery file for you guys...just someone send me the boot.img from latest build...im using bugaaty build
Click to expand...
Click to collapse
take my friend, no flashable
boot.img-5.0-20141202-i9100-HOMEMADE.rar - 5.86 MB

So all those using Omni latest build(20141202) by asimovi..use these 2 files :
CWM Flasher : http://d-h.st/qD6
Omni Recovery : http://d-h.st/rdH
YOU DO NOT NEED TO EDIT THE FILES FOR 20141202 OMNI 5.0 BUILD!!

have also added files for Bugatty build...check the 2nd post of the thread

Tried omni rom 5.0 internal storage not work, any help, tnx in adv.

Yakap said:
Tried omni rom 5.0 internal storage not work, any help, tnx in adv.
Click to expand...
Click to collapse
that is problem of rom by asimovi...download the build by bugatty

The guide has been updated and is now working for all Lollipop roms...even CM12 now
Now the method is very simple...everything can be done on phone...no need to copy replace files in winrar etc

koolkunz said:
So all those using Omni latest build(20141202) by asimovi..use these 2 files :
CWM Flasher : http://d-h.st/qD6
Omni Recovery : http://d-h.st/rdH
YOU DO NOT NEED TO EDIT THE FILES FOR 20141202 OMNI 5.0 BUILD!!
Click to expand...
Click to collapse
Will this work on 5.0.1 build? As the only way I can dual boot is if I backup l rom when I change from kk I have to restore l.

insigma28 said:
Will this work on 5.0.1 build? As the only way I can dual boot is if I backup l rom when I change from kk I have to restore l.
Click to expand...
Click to collapse
Yes it will....

Always boot into recovery when you change the rom?

Yakap said:
Always boot into recovery when you change the rom?
Click to expand...
Click to collapse
you need to boot into recovery to flash the respective kernels if you want to change roms

Problem in the phone Samsung Galaxy young GT-S5360

Dear brothers:
I installed the Roman
HYPERION 7 To my question
I found another Roman Hyperion 9
The new version
I wanted installed
The problem that I can not install
ROMs Enter the average Alrikfra
And follow the steps And I choose
the Roman file When I take off the
phone Romy preinstalled did not
change anything What is the
problem.? Average Alrikfra who use
it: Clockworkmod 5.0.2.6 You also
download the Android Rom L As
well as I faced the same problem
What is the reason for that.? Please
help.

abdoosman said:
Dear brothers:
I installed the Roman
HYPERION 7 To my question
I found another Roman Hyperion 9
The new version
I wanted installed
The problem that I can not install
ROMs Enter the average Alrikfra
And follow the steps And I choose
the Roman file When I take off the
phone Romy preinstalled did not
change anything What is the
problem.? Average Alrikfra who use
it: Clockworkmod 5.0.2.6 You also
download the Android Rom L As
well as I faced the same problem
What is the reason for that.? Please
help.
Click to expand...
Click to collapse
Somebody didn't mount system before flashing the rom zip
Format system data cache
Mount system data cache
Flash rom zip
Mount system data cache
Flash gapps
Restart

marcussmith2626 said:
Somebody didn't mount system before flashing the rom zip
Format system data cache
Mount system data cache
Flash rom zip
Mount system data cache
Flash gapps
Restart
Click to expand...
Click to collapse
I thank my brother
I am applying
the steps properly But Roman does not prove
I do not know what the
problem Question.
What is required
to install this Roman:
http://forum.xda-developers.com/galaxy-y/development/rom-cd-future-v8-t2989908
You apply all
the steps started And all my
attempts to install failed
Is the problem of Alkornel.? Is the problem of backup you keep it in my phone.? When I install the
Roman official program odin
Installation But fail in the
designated Romat
Is the problem of recovery.?

abdoosman said:
I thank my brother
I am applying
the steps properly But Roman does not prove
I do not know what the
problem Question.
What is required
to install this Roman:
http://forum.xda-developers.com/galaxy-y/development/rom-cd-future-v8-t2989908
You apply all
the steps started And all my
attempts to install failed
Is the problem of Alkornel.? Is the problem of backup you keep it in my phone.? When I install the
Roman official program odin
Installation But fail in the
designated Romat
Is the problem of recovery.?
Click to expand...
Click to collapse
The rom is not being flashed because you are not mounting system in Cwm before flashing the zip - it's as simple as that

marcussmith2626 said:
The rom is not being flashed because you are not mounting system in Cwm before flashing the zip - it's as simple as that
Click to expand...
Click to collapse
Brother, you are an expert
Tell me:
What do I do so I can install the
Roman
HYPERION 9 Rom or
Android L
Question: Do you speak
Arabic.?
To explain to me via
whatsapp

abdoosman said:
Brother, you are an expert
Tell me:
What do I do so I can install the
Roman
HYPERION 9 Rom or
Android L
Question: Do you speak
Arabic.?
To explain to me via
whatsapp
Click to expand...
Click to collapse
I'm English
Iv already given you instructions
Goto cwm
Mount's & storage
Format system data cache
Mount system data cache (you failed to do this - if it is mounted it will display "Unmount System")
Install zip from sd card
Select rom zip
Restart

Fix error installing STOCK GAPPS on Oreo ROM

Hey,hey,hey
Did you facing error while installing Full Gapps or Stock Gapps? which says installing gapps error because not enough system partition size.
Yes,i'm facing that bug too,but i have a solution for this issue.That bug can be happen because after flashing any Oreo ROM your system partition become smaller,sure that is not normal.
To fix this you need to "resize" your system partition. I almost resize my system partition using an "Extreme Way!" and if i do that maybe my phone goes bricked. Thanks to god i can found what the problem after try "try and error" method so it can be said,this solution I found because of accident.Ok enough
Ok this the simple method.
1. Download Flashable Busybox by @YashdSaraf https://sourceforge.net/projects/busybox-yds/files/Sep-06-17/Busybox-1.27.2-YDS-UNIVERSAL.zip/download original thread https://forum.xda-developers.com/android/software-hacking/tool-busybox-flashable-archs-t3348543
2. Flash your Oreo Custom ROM
3. Flash the flashable busybox.
4. Go to Wipe option
5. Check "system" partition
6. Press Advance Option > press "Resize" (don't worry,you don't need to reflash the rom)
7. Go to Wipe option again
8. Check "system" partition again
9. Press Advance Option > press "Repair"
10. Then,install the GAPPS ,and you can bit this Oreo with GAPPS berry Jam.
This method work perfectly for me.
This should work on Z00L and Z00T :good:

error 1 when repairing the partition. But it still worked. Thanks

Ichijou Raku said:
2. Flash your Oreo Custom ROM
3. Flash the flashable busybox.
4. Go to Wipe option
5. Check "system" partition
6. Press Advance Option > press "Resize" (don't worry,you don't need to reflash the rom)
7. Go to Wipe option again
8. Check "system" partition again
9. Press Advance Option > press "Repair"
10. Then,install the GAPPS ,and you can bit this Oreo with GAPPS berry Jam.
This method work perfectly for me.
This should work on Z00L and Z00T :good:
Click to expand...
Click to collapse
Hey does I need to do this every time when I installing stock gapps?? Or only for the first time??

mg712702 said:
Hey does I need to do this every time when I installing stock gapps?? Or only for the first time??
Click to expand...
Click to collapse
Same question here.

raiden_1115 said:
Same question here.
Click to expand...
Click to collapse
Bro....I just test it and yes you have to de this everytime when you installing oreo....and I didn't flash the busybox....but I successfully resize it.....then the question is what's for the busybox is??

Doing this every installing oreo is,yes...
I think,cannot resize partition is only happened when upgrading Nougat to Oreo ,because every changing an oreo rom to another oreo rom,I dont have to install busybox again..
Busybox...mmmmm try flashing oreo rom after a nougat one,then resize Partition you will facing an error code on twrp say "resize error blablablabla" (or another,im forget what it say) ,for that,im thinking why i cannot resize the partition,While still in nougat I still can resize partition without any problem..And as you know, busybox contains a number of commands that can run in the terminal, and "resizing command" is contained within the busybox ..
Oh,im not responsible with any error after trying this method,But all this time I have never experienced any errors because this method..

Im still a newbie on android,i dont have a lot experience on android..As I said ,i found this method by trying "try and error" method,trying installing nougat first then oreo,trying installing boot.img first then oreo,and much more attempt..and i still got same error hahaha.. frustrated because cannot installing large gapps..
Then i found this method,just try this method and tell me if you found an error after trying this method..
But I can be sure it will not happen just because resize the partition, because resizing partition here instead of changing the size of partition system becomes bigger,Resize here only returns the size of the corrupted partition system

i got an error when resizing and repairing on my lg v20 h918, I still followed steps and ended up with the error after gapp installation. I am back to a blinking black screen after the lg logo. I think my phone is a lost cause.

How to get back to Miui?

So I had twrp installed and everything , and decided to install a costume rom , now I would like to go back to MIUI , could someone help me please? I have twrp 3.3.0.0 as recovery , flashing the stable global miui gives Treble compatibility error , dont really know what to do.

Jlykrie said:
So I had twrp installed and everything , and decided to install a costume rom , now I would like to go back to MIUI , could someone help me please? I have twrp 3.3.0.0 as recovery , flashing the stable global miui gives Treble compatibility error , dont really know what to do.
Click to expand...
Click to collapse
Use orangefox as recovery and if you get a compatibility error try to delete the file compatibility.zip from the rom zip

darhma said:
Use orangefox as recovery and if you get a compatibility error try to delete the file compatibility.zip from the rom zip
Click to expand...
Click to collapse
So i did that , I was able to install a version of miui but now it asks for a pattern and i didnt have one and when i go into ofrange fox the code for decripting the data doesnt work anymore

darhma said:
Use orangefox as recovery and if you get a compatibility error try to delete the file compatibility.zip from the rom zip
Click to expand...
Click to collapse
Nevermind thank you so much!!!!!!
I had another download of a Miui global rom and i formated everything and just flashed that one and this time it didnt ask me anything its good to go !!
I am really grateful!

Format /data partition.