Database Users

need help i900 problem!!!

hello sir
i have big problem
my i900 power on but no network, always show cross to tower
[i think not detect sim].
and if i want to see imei it show "the phone is currently off.would you like to turn on the phone?"
then option yes/no but if i press yes not happean any thing.
if i try to reset phone by setting>system>hard reset> there is 2 memory
1>main memory ( reset tap is enable)
2>my storage (not enable reset tap)
if i try main memory reset it need password 1234 i enter 1234 then it show this error "when phone is turned off,you cannot hard reset.turn phone on,and try again"
key combined hard reset not work. soft reset work but same.
please ! please !! please !!! need help.
how to revive this phone normolly???

Did you mess around with radio rom (phone.bin)?
Try to reflash it with COMPLETE (phone,pda and csc) new ROM, official
if possible.
You said:
"key combined hard reset not work."
That part of device function (battery charging also) is controlled by phone
part of ROM (phone.bin), so, it seems that problem is caused by faulty phone.bin.
Reflash it!

rtomakov said:
Did you mess around with radio rom (phone.bin)?
Try to reflash it with COMPLETE (phone,pda and csc) new ROM, official
if possible.
You said:
"key combined hard reset not work."
That part of device function (battery charging also) is controlled by phone
part of ROM (phone.bin), so, it seems that problem is caused by faulty phone.bin.
Reflash it!
Click to expand...
Click to collapse
thank you for reply but i am new about this.
can you give me COMPLETE (phone,pda and csc) new ROM, official ???
and how to ???
thanks.

Look here fore official ROMS:
http://www.samsungmobile.com/support/omnia/index.jsp
Manuals about flashing omnia (good ones) you should search on modaco
web site. They have very good omnia support.
Short version: install activesync, all drivers for omnia and run .exe of firmware update from PC.

install active sync 4-5,
install modem driver.
restart pc
but it hang on this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i use on xp[32 bit]
how to solved??

[Q] Pattern Lock on 2nd hand Flipout?

Hi all,
I bit the bullet and picked up a 2nd hand OrangeUK Flipout (details available if I need to prove I bought it legally)... but the seller cannot remember the pattern to draw to access the phone.
How might I resolve this issue, please?
I can access the Bootloader, which is on v91.10, but that's all I've found so far.
I have found RSD Lite v5.6 and the USB Drivers from the MotoDev website.
Will flashing RUTEM_U3_01.19.2 (or any other RUTEM) onto the device ie following the Debranding Guide, reset this and allow me to start playing with Android?
What about the FlipOut Recovery?
Thank-you,
Dylan.

Wow. Err, okay, I wasn't expecting it to be that easy.
It only took a simple Hard Reset and it's fine - Back to the start as if seting up a brand new out-the-box phone!
In case any other fellow Noobie-Noobs encounters this issue, here's what I did:
Motorola Flipout (MB511) - Step by step hard reset
1/. Switch the device off - Hold the power button for a couple of seconds and then press Power Off
2/. With the device off, open it up, hold the X key and hold down the Power button until you see the Motorola M.
3/. Shortly after, an image like this will appear:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4/. TAP the power button to enter the Android System Recovery menu.
5/. Use the little D-Pad to select the 4th option - Wipe Data/Factory Reset.
6/. Press Enter to confirm.
7/. Confirm you want to reset the device.
8/. After the reset, go back into the System Recovery menu and select the 1st option - Reboot.
You should now have one factory-fresh phone!
Gratefully translated from Portuguese instructions at the EIL forum!

A7 ( 2016 ) Service mode

Dear all
I just get a A7 from a Asian friend.. byt it doesn support the Band 4 of LTE in my country.
Is any way to enable the band 4.
I read in internet that the service mode is a way to enable this. with *#0011# ( that in fact goes to a service mode screen ) but different with the tutorials.. the phone shows
[1] STACK 1
[2] STACK 2
Intead the signal information.....
So i try with <BACK> <Q0000> and <BACK> Q <BACK> 0000 in this menu
also i try inside [2] and [1].. nothing seem to work and go to the "Service options!"
Does anyone know how to acces this menu in A7 2016.. or if there any other way to enable the missing LTE Bands?
Regards,

Are you having a dual-sim phone ?

nonoandno said:
Are you having a dual-sim phone ?
Click to expand...
Click to collapse
Yes is the DUOS version

beholdermr said:
Yes is the DUOS version
Click to expand...
Click to collapse
bump, thoeas anyone have an idea how ro enter service Mode
I need to enable the BAND 4 in an A710 FD phone..

you have to be root. I have the same problem some time ago I tried this method, but it did not work.
if you try too, could share it if it works? http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059

alexandres6 said:
you have to be root. I have the same problem some time ago I tried this method, but it did not work.
if you try too, could share it if it works? http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Click to expand...
Click to collapse
So you never test it? you want me to be you guinee pig
As soon i forbid the guarantee i;ll root and try angain.. meanwhile anyone one can confirma that being root is the cause the service mode menu is disable?
regards

i work a lot in this in my phone.. i finally get how to enter Service mode in A7(2016)
first i go root in the phone .. second part i install phone Info that has the option enter Service Mode in root mode.
But seems that the Network I need to unlock is disable in the NV of the phone, so i need to modify .. i went to the post and try to follow th options.
the problem i found is that the A7 ( 2016 ) is unable to be detected in diagnotic mode
I setup USB options *#0808# to any DM opiton ( Diagnotic mode ) and is supposed to be recognized as USB Diagnostic USB .., but it didin;t work with Normal Samsung USB Drivers.. 1.5.60 do you have any clue on what happening?

Hey,guy. I have a new way which may unlock All Network mod .i think You should have a try.(need root)
1.Download Root explorer
2.Go to the contexts :system/csc
3.find out the the file :customer.xml
4.mod the premission like the following pic.
5.reboot And Go to setting you Now can choose LTE mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-A5108 using Tapatalk

same phone and the same problem here

Is there any way to increase headset volume of galaxy A7 2016..???

A way to unlock hardbricked Meizu Pro 5 ?

Hi,
I've hard bricked my Pro 5. No recovery access, no boot to rom, locked bootloader. After many search i see this : https://forum.xda-developers.com/meizu-pro-5/how-to/meizu-customer-service-flash-tools-save-t3447678, but this is bull-****.
I test many manipulations to get something on my phone other than "Bootloader, Locked".
So i dicovered this : Press and holp Vol + and Vol - and press one time power button. We get this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After research about this, we get this :
http://forum.gsmhosting.com/vbb/f777/galexy-s6-exynos-7420-dead-1975230/#post12369382
And this :
http://www.mediafire.com/file/9qmezaezy1fyzrr/Galaxy_S6_Boot_recovery.pptx
Possible way to unlock hardbricked Pro 5 ?
Same way exist for Qualcomm Processor : http://www.androidbrick.com/unbrick...-have-the-right-kind-of-rom-qhsusb_dload_edl/

Subscribed, i do also have a spare "bricked" device

same problem here bro.tried everything..only mode available is fastboot and locked bootloader.in pc device manager i get unknown android 1.going to investigate the problem futher more.pls keep us in touch.tnx

barbonee said:
same problem here bro.tried everything..only mode available is fastboot and locked bootloader.in pc device manager i get unknown android 1.going to investigate the problem futher more.pls keep us in touch.tnx
Click to expand...
Click to collapse
Hey there. Got the same problem. Tried everything. Nothing happens. Have you got your problem solved yet?

The same problem
Sent from my PRO 5 using Tapatalk

Only way to solve this is taking the phone to technical service. Done it myself. Be careful tought, they will try to make you change the entire mother board (280€), but if you insist they will "find a way" to install the correct software in your phone and leave it as if it was new

it is possible to recovery via dongle ... but sn and imei can be lost

Try this thread.
https://forum.xda-developers.com/me...hard-bricked-lost-t3838461/page2#post79752427
Try this thread; it worked perfectly for me.

SOLUTION TO ESIM DISABLED in Galaxy Fold (SM-F900F)

If our Galaxy Fold phone (SM-F900F) has the Esim option disabled and does not allow adding a second line.
Here we will have the solution. (Factory phone will be restored)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.- We must go to google play and download the application "Google phone".
2.- Once the application is downloaded we will have to open it and give it permissions.
3.- We will enter the following code: "* # * # 27262826 # * # *"
4.- A menu will be displayed in which it will notify us that we have CSC installed and we can verify that our system is not one of the first but one that has the word (single) (in my case MXO (simple) = Mexico 1 line) . That means the esim is disabled and you only have one phone line (PHYSICAL SIM). (Due to this problem, we do not have the esim option enabled).
5.-We will remove the SIM card from the phone to continue.
6.- Now we will select the csc of the country we want (that does not contain the word "single" because those are the ones that will not have the esim deactivated) (in my case I will select INU which is the csc of Inda and is the first to always update )
7.- We will install it and 3 options will appear, we will select the first (Sales & Network Code Change) and click on OK.
8.- Followed by the phone will restart and everything will be erased.
9.- When you request to activate the phone and select the language we will insert the PHYSICAL SIM card
10.- We will add all the data and start the phone.
When going to the phone settings we will notice that the option to add an Esim is already available. y The available imei 2 will appear.
Ready.
we will have concluded.

Hey i have tried but didn't get the menu. I have android 11.

Hey, running this on an AT&T unlocked SM-F900U phone and got the menu of the attached picture. Which shall I choose to keep unlocked and enable eSIM ?

theunf said:
Hey, running this on an AT&T unlocked SM-F900U phone and got the menu of the attached picture. Which shall I choose to keep unlocked and enable eSIM ?
theunf said:
Hey, running this on an AT&T unlocked SM-F900U phone and got the menu of the attached picture. Which shall I choose to keep unlocked and enable eSIM ?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Tried the XAA which is the USA unlocked. It processed the request, rebooted the phone but did not erase it and esim menu is still locked.
Repeated the procedure and the gui shows XAA as preset for Sales/Net, Net2 code.