Related
well here is my brick!
If I flash my phone nimporte what SBF says "flash error"
2012/05/07 13:45:13 | -- | ERROR: AP Die ID: 0ab0010b107660010000d8ff0100
2012/05/07 13:45:13 | -- | ERROR: BP Die ID: 0000000000000000000000000000
2012/05/07 13:45:13 | -- | ERROR: AP Public ID: e53a8a292b0b38ade4b76e0e3be0cde12a8d02bd
2012/05/07 13:45:13 | -- | ERROR: BP Public ID: 0000000000000000000000000000000000000000
2012/05/07 13:48:22 | 0 | ERROR: Phone[0000]: Error verifying Code Group 31 checksums. File: 0xB975, Phone: 0x9A68 ->(1557)FlashOp
2012/05/07 13:52:22 | 0 | ERROR: Phone[0000]: Error geting subscriber unit checksum. Device API Error: 0xE003003F Command: RQRCS ->(1511)FlashOp
2012/05/07 13:52:22 | 0 | ERROR: Phone[0000]: Error verifying Code Group 33 checksums. File: 0xFC1B, Phone: 0x4805 ->(1557)FlashOp
2012/05/07 13:56:22 | 0 | ERROR: Phone[0000]: Error geting subscriber unit checksum. Device API Error: 0xE003003F Command: RQRCS ->(1511)FlashOp
2012/05/07 13:56:22 | 0 | ERROR: Phone[0000]: Error verifying Code Group 34 checksums. File: 0xAB80, Phone: 0x4805 ->(1557)FlashOp
2012/05/07 13:57:22 | 0 | ERROR: Phone[0000]: Error geting subscriber unit checksum. Device API Error: 0xE0030009 Command: RQRCS ->(1511)FlashOp
2012/05/07 13:57:22 | 0 | ERROR: Phone[0000]: Error verifying Code Group 35 checksums. File: 0x41F4, Phone: 0x4805 ->(1557)FlashOp
2012/05/07 13:58:22 | 0 | ERROR: Phone[0000]: Error geting subscriber unit checksum. Device API Error: 0xE0030009 Command: RQRCS ->(1511)FlashOp
2012/05/07 13:58:22 | 0 | ERROR: Phone[0000]: Error verifying Code Group 39 checksums. File: 0x830D, Phone: 0x4805 ->(1557)FlashOp
2012/05/07 13:59:23 | 0 | ERROR: Phone[0000]: Error geting subscriber unit checksum. Device API Error: 0xE0030009 Command: RQRCS ->(1511)FlashOp
2012/05/07 13:59:23 | 0 | ERROR: Phone[0000]: Error verifying Code Group 42 checksums. File: 0x4BB7, Phone: 0x4805 ->(1557)FlashOp
2012/05/07 14:00:23 | 0 | ERROR: Phone[0000]: Error geting subscriber unit checksum. Device API Error: 0xE0030009 Command: RQRCS ->(1511)FlashOp
2012/05/07 14:00:23 | 0 | ERROR: Phone[0000]: Error verifying Code Group 45 checksums. File: 0xA9B3, Phone: 0x4805 ->(1557)FlashOp
2012/05/07 14:01:23 | 0 | ERROR: Phone[0000]: Error geting subscriber unit checksum. Device API Error: 0xE0030009 Command: RQRCS ->(1511)FlashOp
2012/05/07 14:01:23 | 0 | ERROR: Phone[0000]: Error verifying Code Group 47 checksums. File: 0xDE21, Phone: 0x4805 ->(1557)FlashOp
and when I restart the "code corrupt"
1 i made an SBF with the GC32 and my phone but remains redemare Blocke sue the blue LED
2 i have access to stck recovery
"e: can not mount cache: recovery / command
e: can not mount cache: recovery / caller
e: can not mount cache: recovery / log "
even after a wipe such toujour "
3 i have access to bootmenu but nothing works
"error: busybox rootfs Was Not created
error: cp not found "
thank you for your help
which rom SBF did u use?
I tested: 3.4.2-179-2 cee deblur
3.4.2-177-5 nordic deblur
3.4.2-177-3 ITA Blur
3.4.2-177-3 GB Blur
3.4.2-164 France (NU, Orange, SFR)
without success
Have you renamed the SBF in short name like "ABC.sbf"?
Have you pushed this short named SBF in the main Folder of RSD Lite?
Maybe your data cable is damaged.
Have made a factoryreset before flashing?
RATTAR
1 dont work
2 yes
3 i m tested for 3 data cable by moto
4 yes of course
only cg31, cg32, cg34, cg53, cg61, cg64 and cg65 pass
I fear your Defy is really bricked, i have read a nearly similiar thread on german forum.
The only solution for this User was to put his Defy to SC.
In his case the motherboard (probably damaged flash-memory) of the Defy was changed by SC.
i feel sorry with you.
thank you
R.I.P my defy
I would take the Defy to the Service Center.
The user i told you, made it and AFAIK the Service Center repair his phone in warranty.
Give your SC a try, the only thing could happend is, that the SC will tell you the repair costs something.
Then you can decide if you want to repair it or not.
The costs for repair are among to 120€.
I defy have longer under warranty and I did not want to be paid € 120 for the repaired while it costed me 50 €.
I bought a new phone
Have you considered selling it for parts for example? 'Cause if the price is right, I might be interested...
Hi
Hi , plz i want to ask you, what you did to your phone with this problem, because this is happening to me now and i don't know what i should do
Code:
Installing '/sdcard/Download/VZW-paek-g2-v5.2-12272013.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/Download/VZW-paek-g2-v5.2-12272013.zip.md5
Skipping MD5 check: no MD5 file found.
I:Zip does not contain SELinux file_contexts file in its root.
##########################
# ___ _ ___ _ __ #
# | _ \ /_\ | __|| |/_/ #
# | _// _ \ | _| | \ #
# |_| /_/ \_\|___||_|\_\ #
# #
##########################
Extracting files..
minzip: Extracted file "/tmp/loki.sh"
minzip: Extracted file "/tmp/loki/loki_flash"
minzip: Extracted file "/tmp/loki/loki_patch"
about to run program [/tmp/loki.sh] with 1 args
2048+0 records in
2048+0 records out
1048576 bytes (1.0MB) copied, 0.026548 seconds, 37.7MB/s
[+] loki_patch v2.1
[-] Unsupported aboot image.
run_program: child exited with status 1
script aborted: assert failed: run_program("/tmp/loki.sh") == 0
assert failed: run_program("/tmp/loki.sh") == 0
E:Error executing updater binary in zip '/sdcard/Download/VZW-paek-g2-v5.2-12272013.zip'
Error flashing zip '/sdcard/Download/VZW-paek-g2-v5.2-12272013.zip'
im running the newest cm11 nightly on a vs980 with TWRP 2.6.3.4 as my recovery
my phone should be supported correct? anyone successfully flash PAEK with this setup?
i'm using the unofficial CM11 for vs980 maintained by Gr33nD3vil and PAEK works great. I would suggest checking your MD5 of the file and reflashing it. You have to flash ROM->GAPPS->KERNAL->SU in that order.
I'm on TWRP 2.6.3.3
I cannot flash any kernel...I don't know why but none of the available kernels flash for me...I've tried switching recovery but still a no go...I've tried redownloading the kernel, still fails....I also can't flash the OSE ROM either...
Sent from my VS980 4G using Tapatalk
tmmdiclick said:
Code:
Installing '/sdcard/Download/VZW-paek-g2-v5.2-12272013.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/Download/VZW-paek-g2-v5.2-12272013.zip.md5
Skipping MD5 check: no MD5 file found.
I:Zip does not contain SELinux file_contexts file in its root.
##########################
# ___ _ ___ _ __ #
# | _ \ /_\ | __|| |/_/ #
# | _// _ \ | _| | \ #
# |_| /_/ \_\|___||_|\_\ #
# #
##########################
Extracting files..
minzip: Extracted file "/tmp/loki.sh"
minzip: Extracted file "/tmp/loki/loki_flash"
minzip: Extracted file "/tmp/loki/loki_patch"
about to run program [/tmp/loki.sh] with 1 args
2048+0 records in
2048+0 records out
1048576 bytes (1.0MB) copied, 0.026548 seconds, 37.7MB/s
[+] loki_patch v2.1
[-] Unsupported aboot image.
run_program: child exited with status 1
script aborted: assert failed: run_program("/tmp/loki.sh") == 0
assert failed: run_program("/tmp/loki.sh") == 0
E:Error executing updater binary in zip '/sdcard/Download/VZW-paek-g2-v5.2-12272013.zip'
Error flashing zip '/sdcard/Download/VZW-paek-g2-v5.2-12272013.zip'
im running the newest cm11 nightly on a vs980 with TWRP 2.6.3.4 as my recovery
my phone should be supported correct? anyone successfully flash PAEK with this setup?
Click to expand...
Click to collapse
Try the CWM 6.0.4.4... Flashify works for me... I've heard a bunch of people having flashing issues on TWRP 2.6.3.4... I switched to CWM and haven't had any flashing issues since.
http://forum.xda-developers.com/showthread.php?t=2468858
All should be good then... Cache wipe takes forever though.
thanks for the replies guys, I got PAEK installed now
http://forum.xda-developers.com/showpost.php?p=49349533&postcount=896
simons linked version fixes the problem with loki
if anyones having the same problem and is also on 12b give this one a shot
Hello after uploading the OREO rom my phone has become a brick. I've tried a lot of tools but nothing helps miflash (different versions) shows different errors.
The phone was initially not detected by the computer but after using the testpoint and flashing B10_FULL-EDL by me, the phone is easily detected as Qualcomm HS-USB QDLoader 9008 but still will not start.
I wanted to try the QFIL tool, but I can not find the appropriate firehose file
My computer is i5 windows 10 64bit but I also tried on another computer with win7 64bit system
Please, tell me what else I can do
I apologize for my English but I use Gtranslate
If your phone is detected as HS USB QD loader 9800, everything should be under control. Did you use Axon7 EDL Tool, or MiFlash?
Yes I tried to flash EDL TOOL but I got an error, unfortunately I do not have a log file right now but I tried to backup (log file below)
Version 2.15
Downloading flash programmer: D:\AXON\tools\prog_ufs_firehose_8996_ddr.elf
Successfully open flash programmer to write: D:\AXON\tools\prog_ufs_firehose_8996_ddr.elf
Waiting for flash programmer to boot
Status: 0 (null)
17:00:45: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
D:\AXON\tools\fh_loader.exe --port=\\.\COM6 --sendxml=full.xml --search_path=D:\AXON\tools --mainoutputdir=D:\AXON\backup\full --showpercentagecomplete --memoryname=ufs --convertprogram2read --showdigestperfile --loglevel=0
************************************************
17:00:45: DEBUG: Binary build date: Nov 21 2017 @ 02:53:33
17:00:45: DEBUG: Build Version: 17.11.21.02.53.33
17:00:45: INFO: Current working dir (cwd): C:\Windows\system32\
17:00:45: INFO: Showing network mappings to allow debugging
17:00:45: DEBUG: Nowe poĄczenia zostanĄ zapami©tane.
17:00:45: DEBUG:
17:00:45: DEBUG: Na licie nie ma ľadnych wpis˘w.
17:00:45: DEBUG:
17:00:45: INFO:
17:00:45: INFO: Trying to store 'full.xml' in string table
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'full.xml'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\full.xml')
17:00:45: DEBUG: 2. Calling fopen('D:\AXON\tools\full.xml') with AccessMode='rb'
17:00:45: DEBUG: Trying get filesize, calling fseek()
17:00:45: DEBUG: Found 'D:\AXON\tools\full.xml' (8583 bytes)
17:00:45: DEBUG: 2. Calling fopen('D:\AXON\tools\full.xml') with AccessMode='r'
17:00:45: DEBUG: Trying get filesize, calling fseek()
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/DigestsPerFile.txt') with AccessMode='w'
17:00:45: INFO: User requested *minimal* logging with --loglevel=0
17:00:45: INFO: User wants to talk to port '\\.\COM6'
17:00:45: DEBUG: port_fd=0xF0
17:00:45: INFO: Took 0.00000000 seconds to open port
17:00:45: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
17:00:45: INFO: If you don't want this, use --dontsorttags
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'devcfg.mbn'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\devcfg.mbn')
17:00:45: DEBUG: 2. Calling stat(devcfg.mbn)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'devcfg.mbn', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/devcfg.mbn') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'fastboot.img'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\fastboot.img')
17:00:45: DEBUG: 2. Calling stat(fastboot.img)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'fastboot.img', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/fastboot.img') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'xbl.elf'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\xbl.elf')
17:00:45: DEBUG: 2. Calling stat(xbl.elf)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'xbl.elf', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/xbl.elf') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'xblbak.elf'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\xblbak.elf')
17:00:45: DEBUG: 2. Calling stat(xblbak.elf)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'xblbak.elf', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/xblbak.elf') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'ddr.img'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\ddr.img')
17:00:45: DEBUG: 2. Calling stat(ddr.img)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'ddr.img', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/ddr.img') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'rpm.mbn'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\rpm.mbn')
17:00:45: DEBUG: 2. Calling stat(rpm.mbn)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'rpm.mbn', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/rpm.mbn') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'tz.mbn'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\tz.mbn')
17:00:45: DEBUG: 2. Calling stat(tz.mbn)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'tz.mbn', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/tz.mbn') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'hyp.mbn'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\hyp.mbn')
17:00:45: DEBUG: 2. Calling stat(hyp.mbn)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'hyp.mbn', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/hyp.mbn') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'sec.dat'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\sec.dat')
17:00:45: DEBUG: 2. Calling stat(sec.dat)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'sec.dat', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/sec.dat') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'pmic.elf'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\pmic.elf')
17:00:45: DEBUG: 2. Calling stat(pmic.elf)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'pmic.elf', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/pmic.elf') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'NON-HLOS.bin'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\NON-HLOS.bin')
17:00:45: DEBUG: 2. Calling stat(NON-HLOS.bin)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'NON-HLOS.bin', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/NON-HLOS.bin') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'adspso.bin'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\adspso.bin')
17:00:45: DEBUG: 2. Calling stat(adspso.bin)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'adspso.bin', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/adspso.bin') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'mdtp.img'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\mdtp.img')
17:00:45: DEBUG: 2. Calling stat(mdtp.img)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'mdtp.img', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/mdtp.img') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'emmc_appsboot.mbn'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\emmc_appsboot.mbn')
17:00:45: DEBUG: 2. Calling stat(emmc_appsboot.mbn)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'emmc_appsboot.mbn', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/emmc_appsboot.mbn') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'boot.img'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\boot.img')
17:00:45: DEBUG: 2. Calling stat(boot.img)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'boot.img', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/boot.img') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'system_1.raw.img'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\system_1.raw.img')
17:00:45: DEBUG: 2. Calling stat(system_1.raw.img)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'system_1.raw.img', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/system_1.raw.img') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'system_2.raw.img'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\system_2.raw.img')
17:00:45: DEBUG: 2. Calling stat(system_2.raw.img)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'system_2.raw.img', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/system_2.raw.img') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'system_3.raw.img'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\system_3.raw.img')
17:00:45: DEBUG: 2. Calling stat(system_3.raw.img)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'system_3.raw.img', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/system_3.raw.img') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'recovery.img'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\recovery.img')
17:00:45: DEBUG: 2. Calling stat(recovery.img)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'recovery.img', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/recovery.img') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'BTFM.bin'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\BTFM.bin')
17:00:45: DEBUG: 2. Calling stat(BTFM.bin)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'BTFM.bin', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/BTFM.bin') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'lksecapp.mbn'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\lksecapp.mbn')
17:00:45: DEBUG: 2. Calling stat(lksecapp.mbn)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'lksecapp.mbn', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/lksecapp.mbn') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'keymaster.mbn'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\keymaster.mbn')
17:00:45: DEBUG: 2. Calling stat(keymaster.mbn)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'keymaster.mbn', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/keymaster.mbn') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'cmnlib.mbn'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\cmnlib.mbn')
17:00:45: DEBUG: 2. Calling stat(cmnlib.mbn)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'cmnlib.mbn', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/cmnlib.mbn') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'cmnlib64.mbn'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\cmnlib64.mbn')
17:00:45: DEBUG: 2. Calling stat(cmnlib64.mbn)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'cmnlib64.mbn', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/cmnlib64.mbn') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'apdp.bin'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\apdp.bin')
17:00:45: DEBUG: 2. Calling stat(apdp.bin)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'apdp.bin', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/apdp.bin') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'msadp.bin'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\msadp.bin')
17:00:45: DEBUG: 2. Calling stat(msadp.bin)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'msadp.bin', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/msadp.bin') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'splash.img'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\splash.img')
17:00:45: DEBUG: 2. Calling stat(splash.img)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'splash.img', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/splash.img') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'echarge.img'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\echarge.img')
17:00:45: DEBUG: 2. Calling stat(echarge.img)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'echarge.img', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/echarge.img') with AccessMode='wb'
17:00:45: DEBUG: ==================================================================================
17:00:45: DEBUG: ==================================================================================
17:00:45: INFO: Looking for file 'ztecfg.bin'
17:00:45: DEBUG: 1. Calling stat('D:\AXON\tools\ztecfg.bin')
17:00:45: DEBUG: 2. Calling stat(ztecfg.bin)
(_)
__ ____ _ _ __ _ __ _ _ __ __ _
\ \ /\ / / _` | '__| '_ \| | '_ \ / _` |
\ V V / (_| | | | | | | | | | | (_| |
\_/\_/ \__,_|_| |_| |_|_|_| |_|\__, |
__/ |
|___/
17:00:45: WARNING: find_file:7808 Couldn't find the file 'ztecfg.bin', returning NULL
17:00:45: INFO: 1. Calling fopen('D:\AXON\backup\full/ztecfg.bin') with AccessMode='wb'
17:00:45: INFO: Sending <configure>
17:00:45: DEBUG: CHANNEL DATA (P0000) (H00202) ( 227 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<configure MemoryName="ufs" Verbose="0" AlwaysValidate="0" MaxDigestTableSizeInBytes="8192" MaxPayloadSizeToTargetInBytes="1048576" ZlpAwareHost="1" SkipStorageInit="0" />
</data>
============================================================================================================
17:00:45: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
17:02:26: {ERROR: ReadPort:5333 Could not read from '\\.\COM6', Windows API ReadFile failed! Your device is probably *not* on this port
Click to expand...
Click to collapse
Miflash shows a freak like a screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm still downloading ROM on this topic.
https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
We'll see what happens
paziak said:
Yes I tried to flash EDL TOOL but I got an error, unfortunately I do not have a log file right now but I tried to backup (log file below)
Miflash shows a freak like a screen
I'm still downloading ROM on this topic.
https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
We'll see what happens
Click to expand...
Click to collapse
I am not very experienced, but Axon Tool is an .exe file for windows. Once you get it, it will get for you, in Windows, proper drivers and MiFlash. If you get the red flag in MiFlash, put phone again in EDL status and then it worked.
Some PCs (as mine) have problems when recognizing phones (especially if PC source has not proper earthing). I actually did all my EDL work on a laptop.
Looking at the errors, it looks like the tool isn't able to find your EDL package.
Download the Axon 7 EDL Tool and extract the folder to the base of your C drive. It should be
C:/Axon 7 EDL Tool
After that, download the EDL package you want to flash, and copy all the files into
C:/Axon 7 EDL Tool/flash/full
Now try running the tool.
my phone stuck in corrupted recovery mode but i can still access edl mode. i can't flash another custom recovery and can't flash stock rom too, it always says:
Validating Application Configuration
Load APP Configuration
COM:4
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
RESETSAHARASTATEEMACHINE:False
SEARCHPATH:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
AUTOPRESERVEPARTITIONS:False
PARTITIONPRESERVEMODE:0
PRESERVEDPARTITIONS:0
PRESERVEDPARTITIONS:
ERASEALL:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM file path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\rawprogram0.xml
PATCH file path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\patch0.xml
Programmer Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
Process Index:0
Start Download
Program Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -u 4 -s 13:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn 'Current working dir: C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: Jun 3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
02:49:12: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************
02:49:12: INFO: Current working dir (cwd): C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\
02:49:12: INFO: Showing network mappings to allow debugging
02:49:12: INFO:
02:49:12: INFO: Trying to store 'rawprogram0.xml' in string table
02:49:12: INFO: Looking for file 'rawprogram0.xml'
02:49:12: INFO: User wants to talk to port '\\.\COM4'
02:49:12: INFO: Took 0.01500000 seconds to open port
02:49:12: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
02:49:12: INFO: If you don't want this, use --dontsorttags
02:49:12: INFO: Looking for file 'recovery.img'
02:49:12: INFO: Looking for file 'boot.img'
02:49:12: INFO:
Total to be tansferd with <program> or <read> is 35.30 MB
02:49:12: INFO: Sending <configure>
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: XML not formed correctly. Expected a < character at loc 0}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: 3. TAG not found or recognized}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR:
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
This can mean
1. You forgot to send DeviceProgrammer first (i.e. QSaharaServer.exe -s 13rog_emmc_firehose_8994_lite.mbn)
2. OR, you did send DeviceProgrammer, but it has crashed and/or is not correct for this target
Regardless this program speaks FIREHOSE protocol and your target is speaking SAHARA protcol, so this will not work
}
Writing log to 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt', might take a minute
Log is 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
aidenskcyu said:
my phone stuck in corrupted recovery mode but i can still access edl mode. i can't flash another custom recovery and can't flash stock rom too, it always says:
Validating Application Configuration
Load APP Configuration
COM:4
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
RESETSAHARASTATEEMACHINE:False
SEARCHPATH:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
AUTOPRESERVEPARTITIONS:False
PARTITIONPRESERVEMODE:0
PRESERVEDPARTITIONS:0
PRESERVEDPARTITIONS:
ERASEALL:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM file path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\rawprogram0.xml
PATCH file path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\patch0.xml
Programmer Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
Process Index:0
Start Download
Program Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -u 4 -s 13:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn 'Current working dir: C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: Jun 3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
02:49:12: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************
02:49:12: INFO: Current working dir (cwd): C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\
02:49:12: INFO: Showing network mappings to allow debugging
02:49:12: INFO:
02:49:12: INFO: Trying to store 'rawprogram0.xml' in string table
02:49:12: INFO: Looking for file 'rawprogram0.xml'
02:49:12: INFO: User wants to talk to port '\\.\COM4'
02:49:12: INFO: Took 0.01500000 seconds to open port
02:49:12: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
02:49:12: INFO: If you don't want this, use --dontsorttags
02:49:12: INFO: Looking for file 'recovery.img'
02:49:12: INFO: Looking for file 'boot.img'
02:49:12: INFO:
Total to be tansferd with <program> or <read> is 35.30 MB
02:49:12: INFO: Sending <configure>
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: XML not formed correctly. Expected a < character at loc 0}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: 3. TAG not found or recognized}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR:
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
This can mean
1. You forgot to send DeviceProgrammer first (i.e. QSaharaServer.exe -s 13rog_emmc_firehose_8994_lite.mbn)
2. OR, you did send DeviceProgrammer, but it has crashed and/or is not correct for this target
Regardless this program speaks FIREHOSE protocol and your target is speaking SAHARA protcol, so this will not work
}
Writing log to 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt', might take a minute
Log is 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
Click to expand...
Click to collapse
Since EDL mode is still accessible, try flashing EUI from MiFlash tool (EUI5.9 ZAXCNFN5902606201S can be flashed from this tool ) and get your device back up running.
nml_krishna said:
Since EDL mode is still accessible, try flashing EUI from MiFlash tool (EUI5.9 ZAXCNFN5902606201S can be flashed from this tool ) and get your device back up running.
Click to expand...
Click to collapse
hey thanks! can you give me some link to this EUI5.9 ZAXCNFN5902606201S rom? i can't find the right rom for miflash
edit: thanks dude it works! but the problem now is how can i flash twrp because it still giving same error in qfil
aidenskcyu said:
hey thanks! can you give me some link to this EUI5.9 ZAXCNFN5902606201S rom? i can't find the right rom for miflash
edit: thanks dude it works! but the problem now is how can i flash twrp because it still giving same error in qfil
Click to expand...
Click to collapse
Try Flashing the same EUI twrp through MiFlash tool.
Open MiFlash and browse to twrp folder in EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92 and connect device in EDL mode.
Once you see the device in MiFlash tool, click on Flash ( leave the flash all except storage checked ).
After flash is complete keep holding power + vol up button for twrp recovery. Hopefully this should fix corrupted twrp.
OR
If you have stock rom CPB file flashed through YGDP tool, follow below procedure to flash it through MiFlash
- Extract CPB file contents using CPB unpacker.
- Rename prog_emmc_firehose.mbn to prog_emmc_firehose_8976_ddr.mbn under the CPB extracted files
- Open MiFlash tool, browse to the CPB extracted folder.
- Connect device in EDL mode
- Click on Flash
Once the flash is complete, device should be able to boot to stock rom.
I was on oxygen os port
after 6th or 7 day it suddenly goes off
and never boot again
i was able to boot in fastboot but not a
single command worked
so i fire up QFIL and try to flash
stock rom but nothing worked
finlly i click [erase all before download]
now i cANT boot in to faSR BOOT and
unable to flash stock rom by qfil
help me
QFIL log
Start Download
Program Path:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Binary build date: Oct 31 2016 @ 22:51:05
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
19:27:15: Requested ID 13, file: "D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf"
19:27:16: 624548 bytes transferred in 0.219000 seconds (2.7197MBps)
19:27:16: File transferred successfully
19:27:16: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:UFS
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:True
Use Verbose:True
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Base Version: 16.10.28.15.28
Binary build date: Oct 31 2016 @ 22:51:02
Incremental Build version: 16.10.31.22.51.02
19:27:19: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM22 --erase=0 --noprompt --showpercentagecomplete --testvipimpact --verbose --zlpawarehost=1 --memoryname=ufs
************************************************
19:27:19: INFO: Current working dir (cwd): C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\
19:27:19: INFO: Showing network mappings to allow debugging
19:27:19: INFO: User wants to talk to port '\\.\COM22'
19:27:19: INFO: Took 0.00000000 seconds to open port
19:27:19: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
19:27:19: INFO: If you don't want this, use --dontsorttags
19:27:19: INFO: Sending <configure>
19:27:19: INFO: TARGET SAID: 'Binary build date: Dec 7 2018 @ 17:09:09'
19:27:19: INFO: TARGET SAID: 'Chip serial num: 4294438911 (0xfff7efff)'
19:27:19: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase '
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 17 ('AlwaysValidate') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 2 ('MaxDigestTableSizeInBytes') with value '8192' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 1 ('MaxPayloadSizeToTargetInBytes') with value '1048576' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 14 ('ZlpAwareHost') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 23 ('SkipStorageInit') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_open(0x2) - If this hangs use SkipStorageInit='1' for configure'
19:27:19: INFO: TARGET SAID: 'memory_name set to 'UFS' and fh.sector_size = 4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MinVersionSupported' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MaxXMLSizeInBytes' with value '4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'Version' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'DateTime' with value 'Dec 7 2018 - 17:09:09'
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
19:27:19: INFO: Issuing Erase
19:27:19: INFO: _____ _ _____
19:27:19: INFO: |_ _| (_) | ___|
19:27:19: INFO: | | ___ ___ _ _ _ _ __ __ _ | |__ _ __ __ _ ___ ___
19:27:19: INFO: | |/ __/ __| | | | | '_ \ / _` | | __| '__/ _` / __|/ _ \
19:27:19: INFO: _| |\__ \__ \ |_| | | | | | (_| | | |__| | | (_| \__ \ __/
19:27:19: INFO: \___/___/___/\__,_|_|_| |_|\__, | \____/_| \__,_|___/\___|
19:27:19: INFO: __/ |
19:27:19: INFO: |___/
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 8 ('SECTOR_SIZE_IN_BYTES') with value '512' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 10 ('physical_partition_number') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_erase(0)'
19:27:19: INFO: TARGET SAID: 'In handleErase Calling storage_device_erase()'
19:27:19: INFO: TARGET SAID: 'Did not specify start/size, format whole device'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to open the device 3 slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'INFO: Device type 3, slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'WARN: Format failed to open 3 slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'storage_device_format returned FALSE'
19:27:19: INFO: TARGET SAID: 'ERROR 17: Line 1607: HANDLE_ERASE_FAILURE'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
19:27:19: {ERROR: Something failed with the <erase> command. The port_trace.txt can shed more information on this
Note that for eMMC <erase> is only valid for physical_partition 0. For UFS <erase> is valid for all LUNs
}
Writing log to 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt', might take a minute
Log is 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt'
Download Fail:FireHose Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
Failed to write error
I aslo did the same thing. selected erase all before download. Now getting failed to write ( Sahara firehose error)
Have you find solution for this @Neo neer
Neo neer said:
Start Download
Program Path:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Binary build date: Oct 31 2016 @ 22:51:05
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
19:27:15: Requested ID 13, file: "D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf"
19:27:16: 624548 bytes transferred in 0.219000 seconds (2.7197MBps)
19:27:16: File transferred successfully
19:27:16: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:UFS
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:True
Use Verbose:True
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Base Version: 16.10.28.15.28
Binary build date: Oct 31 2016 @ 22:51:02
Incremental Build version: 16.10.31.22.51.02
19:27:19: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM22 --erase=0 --noprompt --showpercentagecomplete --testvipimpact --verbose --zlpawarehost=1 --memoryname=ufs
************************************************
19:27:19: INFO: Current working dir (cwd): C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\
19:27:19: INFO: Showing network mappings to allow debugging
19:27:19: INFO: User wants to talk to port '\\.\COM22'
19:27:19: INFO: Took 0.00000000 seconds to open port
19:27:19: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
19:27:19: INFO: If you don't want this, use --dontsorttags
19:27:19: INFO: Sending <configure>
19:27:19: INFO: TARGET SAID: 'Binary build date: Dec 7 2018 @ 17:09:09'
19:27:19: INFO: TARGET SAID: 'Chip serial num: 4294438911 (0xfff7efff)'
19:27:19: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase '
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 17 ('AlwaysValidate') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 2 ('MaxDigestTableSizeInBytes') with value '8192' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 1 ('MaxPayloadSizeToTargetInBytes') with value '1048576' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 14 ('ZlpAwareHost') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 23 ('SkipStorageInit') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_open(0x2) - If this hangs use SkipStorageInit='1' for configure'
19:27:19: INFO: TARGET SAID: 'memory_name set to 'UFS' and fh.sector_size = 4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MinVersionSupported' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MaxXMLSizeInBytes' with value '4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'Version' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'DateTime' with value 'Dec 7 2018 - 17:09:09'
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
19:27:19: INFO: Issuing Erase
19:27:19: INFO: _____ _ _____
19:27:19: INFO: |_ _| (_) | ___|
19:27:19: INFO: | | ___ ___ _ _ _ _ __ __ _ | |__ _ __ __ _ ___ ___
19:27:19: INFO: | |/ __/ __| | | | | '_ \ / _` | | __| '__/ _` / __|/ _ \
19:27:19: INFO: _| |\__ \__ \ |_| | | | | | (_| | | |__| | | (_| \__ \ __/
19:27:19: INFO: \___/___/___/\__,_|_|_| |_|\__, | \____/_| \__,_|___/\___|
19:27:19: INFO: __/ |
19:27:19: INFO: |___/
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 8 ('SECTOR_SIZE_IN_BYTES') with value '512' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 10 ('physical_partition_number') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_erase(0)'
19:27:19: INFO: TARGET SAID: 'In handleErase Calling storage_device_erase()'
19:27:19: INFO: TARGET SAID: 'Did not specify start/size, format whole device'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to open the device 3 slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'INFO: Device type 3, slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'WARN: Format failed to open 3 slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'storage_device_format returned FALSE'
19:27:19: INFO: TARGET SAID: 'ERROR 17: Line 1607: HANDLE_ERASE_FAILURE'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
19:27:19: {ERROR: Something failed with the <erase> command. The port_trace.txt can shed more information on this
Note that for eMMC <erase> is only valid for physical_partition 0. For UFS <erase> is valid for all LUNs
}
Writing log to 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt', might take a minute
Log is 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt'
Download Fail:FireHose Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
Click to expand...
Click to collapse
So, basicially did it work for you??? @Neo neer
some how Emmc write protection is enabled
thriloksaiy said:
I aslo did the same thing. selected erase all before download. Now getting failed to write ( Sahara firehose error)
Have you find solution for this @Neo neer
Click to expand...
Click to collapse
i don't know how but
emmc write protention is enabled and there is
only two ways
1) change the motherbord
2) take out storage and reformat it using UFI box and solder again it on bord without damaging any part
i highly recomand visit any expert or go to service center
and my phone is still bricked
unable to go out due to lockdown
somehow EMMC write protection i enabled
kool.5 said:
So, basicially did it work for you??? @Neo neer
Click to expand...
Click to collapse
i don't know how but
emmc write protention is enabled and there is
only two ways
1) change the motherbord
2) take out storage and reformat it using UFI box and solder again it on bord without damaging any part
i highly recomand visit any expert or go to service center
and my phone is still bricked
unable to go out due to lockdown
Neo neer said:
i don't know how but
emmc write protention is enabled and there is
only two ways
1) change the motherbord
2) take out storage and reformat it using UFI box and solder again it on bord without damaging any part
i highly recomand visit any expert or go to service center
and my phone is still bricked
unable to go out due to lockdown
Click to expand...
Click to collapse
Okay, thanks for the heads-up.