I am currently living in a facility that won't allow me to have my laptop. I am running 11-20141207-nightly-moto_msm8960 I would like to upgrade to cm-12-20150114-nightly which when i check updates shows me that's the latest nightly I'm not sure why it hasn't been updated since then and I'm not sure if i should use that or one of dhacker29s but i would like to use CWM and flash that latest nightly from my SD card because I've been told if i use the updater it will most likely not go well. My question is would o be able to just use the updater or should I flash from SD through CWM and if I do what would be the best procedure and if I use one of dhacker29s files which i should pick I also noticed there are ones tagged with jellybean bootloader and i am not sure which one I have. I know to wipe cache system and data, flash cm12 then gapps then wait fifteen to 20 minutes I just need advice on the above mentioned issues. Thank you.
My bet is that you have the KK BL version. Please do note that the moto_msm8960 family has been temporarily de-unified since 20150114, hence you're only getting update notifications up to that date. The newer builds appear under the "xt907" name.
Also, I highly suggest a clean flash between every major Android version jump.
Sent from Google Nexus 4 @ CM12
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]
Could you point me to a thread possibly that would help me flash from CWM and which one to flash
deathwithafi said:
Could you point me to a thread possibly that would help me flash from CWM and which one to flash
Click to expand...
Click to collapse
You will have to switch to the newest xt907 TWRP that dhacker built. There is a change and the new xt907 specific ROMs will not boot unless you use the xt907 specific TWRP
Sent from my RAZR M on BlissPop Lollipop 5.0.2 from Tapatalk
Thank you but that is not a viable option currently without access to a pc. Would I be able to take the update from cyanogenmod update in about phone from cm11 nightly to cm12 nightly?
You don't need a computer; everything can be done on the phone. Download & flash the latest TWRP, dl CM12, backup your current build, wipe, flash CM12.
deathwithafi said:
Thank you but that is not a viable option currently without access to a pc. Would I be able to take the update from cyanogenmod update in about phone from cm11 nightly to cm12 nightly?
Click to expand...
Click to collapse
Its the only option. You can download the latest TWRP and flash it using Flashify or Rashr on your phone
Sent from my RAZR M on BlissPop Lollipop 5.0.2 from Tapatalk
xKroniK13x said:
Its the only option. You can download the latest TWRP and flash it using Flashify or Rashr on your phone
Sent from my RAZR M on BlissPop Lollipop 5.0.2 from Tapatalk[/QUOTE
Should I also backup my apps and settings with titanium?
Click to expand...
Click to collapse
deathwithafi said:
Should I also backup my apps and settings with titanium?
Click to expand...
Click to collapse
When we say wipe, yes of course.
Sent from Google Nexus 4 @ CM12
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]
---------- Post added at 08:01 AM ---------- Previous post was at 08:00 AM ----------
xKroniK13x said:
You will have to switch to the newest xt907 TWRP that dhacker built. There is a change and the new xt907 specific ROMs will not boot unless you use the xt907 specific TWRP
Sent from my RAZR M on BlissPop Lollipop 5.0.2 from Tapatalk
Click to expand...
Click to collapse
Which "newest" do you mean? I have the 2.8.1.0 found on the other forum and it seems to flash both moto_msm8960 and xt907 ROMs reasonably well.
Sent from Google Nexus 4 @ CM12
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]
AndyYan said:
When we say wipe, yes of course.
Sent from Google Nexus 4 @ CM12
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]
---------- Post added at 08:01 AM ---------- Previous post was at 08:00 AM ----------
Which "newest" do you mean? I have the 2.8.1.0 found on the other forum and it seems to flash both moto_msm8960 and xt907 ROMs reasonably well.
Sent from Google Nexus 4 @ CM12
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]
Click to expand...
Click to collapse
From what I've read, the deunified builds need a deunified recovery. Or at least they did when they first were deunified. I bootlooped the latest CM12 based ROMs until I switched, however, this has been a few weeks now!
Sent from my RAZR M on BlissPop Lollipop 5.0.2 from Tapatalk
Related
Pretty much what the topic says. I can't find info on this.I need stock kernal so I can run the update. 4.1.2
Right now I'm unlocked, rooted with Stock. Is there a zip someone can provide so I may flash it or step by step instructions on how to complete only restoring the kernal? Highly appreciated!!!
Download the stock files from here
https://developers.google.com/android/nexus/images
You can pull the boot.img from the zip file. Then just
Fastboot flash boot name of image.img
Travisdroidx2 said:
Download the stock files from here
https://developers.google.com/android/nexus/images
You can pull the boot.img from the zip file. Then just
Fastboot flash boot name of image.img
Click to expand...
Click to collapse
I am very new at this so please understand.
I did what you said and I now have the boot.img file. How do I fast boot flash? I'm really only familiar with flashing zip files using CWM. If you could walk me through it that would be awesome.
Also, after these steps are complete, will this wipe out my nexus back to factory? I didn't want to lose everything I had on it meaning files, games etc.
thanks
Anyone??
bustinstugots24 said:
Pretty much what the topic says. I can't find info on this.I need stock kernal so I can run the update. 4.1.2
Right now I'm unlocked, rooted with Stock. Is there a zip someone can provide so I may flash it or step by step instructions on how to complete only restoring the kernal? Highly appreciated!!!
Click to expand...
Click to collapse
You say you're "unlocked, rooted with stock". Are you saying that you've unlocked the bootloader, installed custom recovery (cwm) and flashed supersu or similar? If you have not installed a custom ROM or kernel you can manually apply the 4.1.2 update via recovery.
Sent from my Nexus 7 using Tapatalk 2
comminus said:
You say you're "unlocked, rooted with stock". Are you saying that you've unlocked the bootloader, installed custom recovery (cwm) and flashed supersu or similar? If you have not installed a custom ROM or kernel you can manually apply the 4.1.2 update via recovery.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
That is correct. But when I tried to flash the update using CWM it gave me an error. The reason was because I had flashed the trinity Kernal about a week ago. I was able to figure out how to flash the original boot.IMG using adb, put it back to the stock kernel, and was then able to flash the update using CWM. Finally worked after all those steps.
Sent from my HTC Sensation 4G using xda app-developers app
bustinstugots24 said:
That is correct. But when I tried to flash the update using CWM it gave me an error. The reason was because I had flashed the trinity Kernal about a week ago. I was able to figure out how to flash the original boot.IMG using adb, put it back to the stock kernel, and was then able to flash the update using CWM. Finally worked after all those steps.
Sent from my HTC Sensation 4G using xda app-developers app
Click to expand...
Click to collapse
Are you getting..
assert failed: apply_patch_check("EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5007360:456f44ae204097e5159dbd38d97e86aa66e45263
Because so am I, and I'm on Trinity kernel too..
---------- Post added at 04:52 PM ---------- Previous post was at 04:24 PM ----------
OK flash the stock kernel and it works
https://www.dropbox.com/s/e1oshxpyfa7k1xk/stock-jro03d-nexus7-kernel.zip
marky9074 said:
Are you getting..
assert failed: apply_patch_check("EMMC:/dev/block/platform/sdhci-tegra.3/by-name/LNX:5007360:456f44ae204097e5159dbd38d97e86aa66e45263
Because so am I, and I'm on Trinity kernel too..
---------- Post added at 04:52 PM ---------- Previous post was at 04:24 PM ----------
OK flash the stock kernel and it works
https://www.dropbox.com/s/e1oshxpyfa7k1xk/stock-jro03d-nexus7-kernel.zip
Click to expand...
Click to collapse
A few days ago I was begging people to send me a zip file of the kernel and they claimed it didn't exist. This would have been real handy. Do u have a zip file for the latest kernel by any chance???
Sent from my HTC Sensation 4G using xda app-developers app
Of the 4.1.2 kernel? No, but maybe I should try and find one prior to the 4.2 update to avoid this happening again!
Sent from my Nexus 7 using Tapatalk 2
Is this the stock kernel? Can I use it like any other kernel with a custom ROM? How do I know if I'm JRO03D or something else?
Sent from my Nexus 7 using xda premium
marky9074 said:
Of the 4.1.2 kernel? No, but maybe I should try and find one prior to the 4.2 update to avoid this happening again!
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Dude that would be awesome. I can screw around with some custom kernels and alway go back to stock if I need to. If you can do that it's highly appreciated
StrangerWeather said:
Is this the stock kernel? Can I use it like any other kernel with a custom ROM? How do I know if I'm JRO03D or something else?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
You can tell by looking at the about tablet section in your settings. It's the build number.
Sent from my HTC Sensation 4G using xda app-developers app
bustinstugots24 said:
A few days ago I was begging people to send me a zip file of the kernel and they claimed it didn't exist. This would have been real handy. Do u have a zip file for the latest kernel by any chance???
Sent from my HTC Sensation 4G using xda app-developers app
Click to expand...
Click to collapse
Here are both stock kernels:
JRO03D cwm flashable - http://dl.dropbox.com/u/12008411/kernel-grouper-jro03d.zip
JZO54K cwm flashable - http://dl.dropbox.com/u/12008411/kernel-grouper-jzo54k.zip
sha1sum
kernel-grouper-jro03d.zip - 2dc7ef5f59f86015e292d8ae7a9ab834c5d852aa
kernel-grouper-jzo54k.zip - 81cd77a31d4fadd82873b1182e377ec51b900cf8
The stock kernel zip worked great for me, patching system files as we speak, thank you!
comminus said:
Here are both stock kernels:
JRO03D cwm flashable - http://dl.dropbox.com/u/12008411/kernel-grouper-jro03d.zip
JZO54K cwm flashable - http://dl.dropbox.com/u/12008411/kernel-grouper-jzo54k.zip
Click to expand...
Click to collapse
Life saver. Thank you so much
Sent from my Nexus 7 using xda app-developers app
Can you flash the stock kernel zip in cwm? I've tried twice and it says its doing it then when I go back to my tablet info it says I'm still on Motleys kernel hmm? What am I doing wrong?
Sent from my Nexus 7 using Tapatalk 2
Toyeboy said:
Can you flash the stock kernel zip in cwm? I've tried twice and it says its doing it then when I go back to my tablet info it says I'm still on Motleys kernel hmm? What am I doing wrong?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I have fixed the updater and re-posted the files. The sha1 sums have been added to the post as well. Sorry for the trouble
Hi,
I have build number JRO03S on my Nexus 7, could I flash JRO03D kernel? or would it mess everything up?
Pr3tec said:
Hi,
I have build number JRO03S on my Nexus 7, could I flash JRO03D kernel? or would it mess everything up?
Click to expand...
Click to collapse
I most likely wont mess everything up. Unless there is a compelling reason to do so, just update your N7 to 4.1.2 / JZ054K.
Hi,
I got the "assert failed: apply_patch_check("EMMC:/dev/block/platform/sdhci-tegra.3..." error.
I have installed a custom kernel and it seems that i need the stock kernel to complete the update to 4.1.2, but i have not found the stock kernel of the JRO03S.
Have you any idea where i could find it ?
I found the .img kernel in this thread : http://forum.xda-developers.com/showthread.php?t=1890415
Then i was able to update to 4.1.2 successfully
Using twrp ...Whatever the most recent is 2.6.3?
I,have successfully installed cm10.2 Roms in the past.. However when I do the same with a kitkat ROM.. It always fails, I've tried paranoid and cm..... I've wiped, cleared cache and dalvik but alas to no avail :3
Does anybody have suggestions? I almost died of smiles when knock on worked in 4.3 cm (kind of) but I'm sick of the stock ROM and lg's...... Sh-ware
Sent from my LG-D802 using Tapatalk
There's a discontinued 2.6.3.4 in the Original Development section. Flashes kk ROMs just fine
gusly said:
There's a discontinued 2.6.3.4 in the Original Development section. Flashes kk ROMs just fine
Click to expand...
Click to collapse
Seems flashing that particular recovery with flashify is... Unhelpful xD just fails to boot into even lg's three power button precursor
Sent from my LG-D802 using Tapatalk
Yeah, I encountered problems through flashify too. I just flashed the zip from TWRP 2.6.3.x, then rebooted the recovery.
Sent from my G2 using Tapatalk
Hey for 4.4 Roms you need twrp 2.6.3.3...comes in a zip so easy enough to just flash!....also Philz custom cwm recovery supports 4.4
yeah update recovery,but also do a system and data wipe as well.
be sure to have a backup
and fully downloaded rom.
Sent from my LG-D802 using xda app-developers app
Thanks to all... I used a discontinued 2.6.4? Twrp... I ended up using the noob friendly tool that was provided... In surprised at how stable nightlies are
Sent from my LG-D802 using Tapatalk
So, i have the LG G2 D800 and the Gyroscope works fine since i bought it, custom roms rotated fine but recently ANY Rom i flash doesn't rotate, ran some tests and the Gyro stays at 0,0,0 when i flash the d80010c to 20d kitkat stock from LG it rotates and the tests go from -1,0,2 and so on and so forth.
I don't want LG's UI, but i also want rotation, if you guys can help, please. I recorded it also just today, sorry for bad quality.
https://www.youtube.com/watch?v=Z6O5aHle7-A&feature=youtu.be
0:06 - Cyanogenmod 10.2 [SLIM GAPPS] 4.3.1
4:15 PAC-ROM [PA_GAPPS] 4.4.2
11:40 LG G2 KitKat Flashable rom [Stock] 4.4.2
Simply download and flash this modem. Your rotation will be working just fine afterwards. Make sure to make a backup of your current baseband or if when/if you ever flash back to stock you wont have rotation with the stock rom lol. Simple fix
http://apicdn.viglink.com/api/click...rs.com&subid=cfcd208495d565ef66e7dff9f98764da
Sent from my LG-D800 using XDA Premium 4 mobile app
The modem you need to get rotation working depends on the custom rom you are using!
If you are using a custom rom that is based on LG's KitKat Source (e.g. Mahdi Rom, Slim Kat has now started with test builds) you need a non-modded KitKat modem version.
If you are using a Kit-Kat Custom rom, but which is based on LG's JellyBean Sources you need a moded Kitkat modem version to get rotation working.
Which custom are you using at the moment?
The moded versions can be found in this thread: http://forum.xda-developers.com/showthread.php?t=2705509
Maritus1 said:
The modem you need to get rotation working depends on the custom rom you are using!
If you are using a custom rom that is based on LG's KitKat Source (e.g. Mahdi Rom, Slim Kat has now started with test builds) you need a non-modded KitKat modem version.
If you are using a Kit-Kat Custom rom, but which is based on LG's JellyBean Sources you need a moded Kitkat modem version to get rotation working.
Which custom are you using at the moment?
The moded versions can be found in this thread: http://forum.xda-developers.com/showthread.php?t=2705509
Click to expand...
Click to collapse
Dude he shows it in the video and kinda posted it... lol
Sent from my LG-D800 using XDA Premium 4 mobile app
---------- Post added at 06:22 PM ---------- Previous post was at 06:19 PM ----------
I don't just post with download links telling individuals to download this and that and as I know what I'm talking about.... I mean come on flashing is serious business... damage can be done but don't get all dramatic
Sent from my LG-D800 using XDA Premium 4 mobile app
MIKEYG86 said:
[/COLOR]I don't just post with download links telling individuals to download this and that and as I know what I'm talking about.... I mean come on flashing is serious business... damage can be done but don't get all dramatic
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You are right, I haven't read properly. But I think just providing people with download links doesn't help them at all.
For myself i want to know why these problems appear and why these issues can be solved by flashing this specific file.
Greetings
Maritus1 said:
You are right, I haven't read properly. But I think just providing people with download links doesn't help them at all.
For myself i want to know why these problems appear and why these issues can be solved by flashing this specific file.
Greetings
Click to expand...
Click to collapse
Well no one had replied to his post and that was in March so I thought you would appreciate a quick fix. I usually like to explain my reasoning behind suggesting a link to download a file and what it's going to do and how exactly its going to fix your problem and what has happened in the first place so the user not only gets an answer or ultimately a solution he is now is knowledgeable on the subject for future reference.
Sent from my LG-D800 using XDA Premium 4 mobile app
MIKEYG86 said:
Well no one had replied to his post and that was in March so I thought you would appreciate a quick fix. I usually like to explain my reasoning behind suggesting a link to download a file and what it's going to do and how exactly its going to fix your problem and what has happened in the first place so the user not only gets an answer or ultimately a solution he is now is knowledgeable on the subject for future reference.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I noticed that is for a D800. Which one is for KiTKat D80220D Stock ROM? I was trying to get LTE and flashed a modem but lost rotation. I need to get back to the original D80220D modem. Thanks.
Stock as in fully stock or a custom stock ROM??
Sent from my LG-D800 using XDA Premium 4 mobile app
MIKEYG86 said:
Stock as in fully stock or a custom stock ROM??
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That is not going to work for a D802. The only way to fix this is to flash back to stock (fully). I did that an amazingly lost nothing except root. I was proud of myself. Then in the process of trying to regain root I lost everything...ouch! I completely forgot about how i originally got root while in JB an and still had the old iroot files. It was a disaster.
MIKEYG86 said:
Simply download and flash this modem. Your rotation will be working just fine afterwards. Make sure to make a backup of your current baseband or if when/if you ever flash back to stock you wont have rotation with the stock rom lol. Simple fix
http://apicdn.viglink.com/api/click...rs.com&subid=cfcd208495d565ef66e7dff9f98764da
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, the link you had provided is no longer active. Is it possible for you to update that please? I am facing this problem currently and your post appears like the best answer around. I intend to try out your method, however that can be possible if you can update the URL for downloading and flashing the modem.
Hey folks,
Got a MDL 4.2.2 ATT S4. How do I go about flashing latest CM11 ? Would I need safestrap recovery, or a specific kernel ?
TIA!
Look for CASUAL in the development forum. That'll root and put twrp on your phone. Then you can flash cm in the twrp recovery. You don't need or want safestrap.
http://forum.xda-developers.com/showthread.php?p=41892523
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Look for CASUAL in the development forum. That'll root and put twrp on your phone. Then you can flash cm in the twrp recovery. You don't need or want safestrap.
http://forum.xda-developers.com/showthread.php?p=41892523
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Ok, so no update to TWRP is needed, and no specific kernel for CM11 ? Do I need to install a loki patch? or is CM11 already LOKI-ed?
SaHiLzZ said:
Ok, so no update to TWRP is needed, and no specific kernel for CM11 ? Do I need to install a loki patch? or is CM11 already LOKI-ed?
Click to expand...
Click to collapse
I don't believe cm11 is loki'd. I'd flash the Loki doki zip after flashing cm. It won't hurt anything.
Sent from my Nexus 5 using XDA Free mobile app
Tell me if there is a pacman ROM for 4.4.2 on my droid RAZR m if there is can you please post it
Sent from my DROID RAZR M using XDA Free mobile app
Dr3loc said:
Tell me if there is a pacman ROM for 4.4.2 on my droid RAZR m if there is can you please post it
Sent from my DROID RAZR M using XDA Free mobile app
Click to expand...
Click to collapse
pacman build available here for JB BL and here for KK BL
rahimali said:
pacman build available here for JB BL and here for KK BL
Click to expand...
Click to collapse
Sorry to bother again but is the ROM I need in dev , legacy 4.3 , or nightly
Sent from my DROID RAZR M using XDA Free mobile app
Dr3loc said:
Sorry to bother again but is the ROM I need in dev , legacy 4.3 , or nightly
Sent from my DROID RAZR M using XDA Free mobile app
Click to expand...
Click to collapse
the nightly folders from each link. both nightly folders contain 4.4.4 KK ROMs, pick the one corresponding to the bootloader on your phone, either JB or KK...
rahimali said:
the nightly folders from each link. both nightly folders contain 4.4.4 KK ROMs, pick the one corresponding to the bootloader on your phone, either JB or KK...
Click to expand...
Click to collapse
I downloaded two different zip files from nightly and when I tried all of ROMs they just went into a bootloop my droid RAZR m (xt907) ran 4.4.2 but when I changed the ROM to paranoid it went to 4.4.4 and so far paranoid is the only ROM that works for me I even tried tobsee if my backup ROM would work and i t didntim using twrp 2.7 I appreciate the so far thank you
Sent from my DROID RAZR M using XDA Free mobile app
Dr3loc said:
I downloaded two different zip files from nightly and when I tried all of ROMs they just went into a bootloop my droid RAZR m (xt907) ran 4.4.2 but when I changed the ROM to paranoid it went to 4.4.4 and so far paranoid is the only ROM that works for me I even tried tobsee if my backup ROM would work and i t didntim using twrp 2.7 I appreciate the so far thank you
Sent from my DROID RAZR M using XDA Free mobile app
Click to expand...
Click to collapse
there are lots and lots of (official) KK 4.4.4 ROMs available, OSE, Gummy, CM11, Mokee, PA, PAC, LS, Carbon, Vanir, Slim etc. try some of the others, see which one you like best