Has anyone tried using the Seido holster with a adhesive skin like the Bodyguards or Invisible shield coating? I assume the skin is very thin but then the holster may be very tight and may not allow even the slightest addition in size (0.2 mm per Invisible shield website).
Seido Holster= http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=871
Invisible shield= http://www.invisibleshield.com/smartphone/at&t/tilt.php
Bodyguardz= http://www.bodyguardz.com/BodyGuardz_for_AT_T_Tilt_8925_p/nl-batt-1107.htm
Sediosedio, can you comment on the holster if it will allow the 0.2mm?
Thanks
FYI, it does.
Just to let you know I wanted to do this exact same setup.
The good news is it does fit... the bad news is that you may be unhappy with the invisible shield.
Do a seach for my posts there is one recently describing my experience with the shield. Long story short, it doesn't cover much of the device (hardly nothing on the sides) and it doesn't really give a nice clean look when installed (unless you have access to a cleanroom with 0% dust particles in the air).
It would have been nice if it did work, as protecting the back of the phone from scratches would have been nice (as that area is exposed in the holster). Also the constant moving in and out of the holster MAY rub against the top part of the phone and cause the shield to slowly peel off...on the flip side it may be lessening wear on the phone case itself.
I am sending mine back via money-back guarantee today and have already ordered the Seido rubberized case. Unfortunately their standard holster does NOT work with their case (it is 1mm thick) so I had to order the combo to get the specialized holster too.
So, I have an extra holster for an uncased phone....if anyone wants to buy it...
I have the Invisible shield and the Seidio rubberized case. Both fits together well.
I went with the rather expensive invisible shield since I know their products and simply licked it for the apple stuff which is lying around at home.
Hello to all,
I was wondering if the Seidio Innocase was really any different from those cheapy $6 rubberized plastic cases? I tried one of the cheapy ones on at the mall but it made the phone even bulkier so I decided to skip it, is the innocase really much thinner?
I had the cheap one, and once it failed I decided to stop dicking around - Got the Innocase.
Differences:
-Cheap case is thicker
-Cheap case doesn't hold on as well. After awhile, mine kept sort of falling off
-Innocase has a nice soft felt-lined bottom cover that protects the phone
-The BIGGEST difference... The cheap case touches the screen, and the only way to make it work was to dremel it and modify it so I could actually use the phone
I bought the phone used and it has the back cover with the Flip PU leather cover. I do not like it, as I prefer a regular case. Can I just cut that part off? Would that affect the operation of the phone? Or can I get a case that can accommodate the flip PU?
Yes, you can cut off the flipping cover of the case without any issues. Of course, it may be cheaper to just purchase another case without the flip feature.
Anyone found a belt clip that will work with a naked S9+? I actually use a very thin Spigen case, but the two clips I tried have companion cases which are thicker, making the Spigen case too loose for them. I love the thiness of the Spigen, just looking for a clip.
Thanks
The encased ones work well. They have a model that will work with slimmer cases.
https://www.amazon.com/Encased-Slim...qid=1526924832&sr=8-20&keywords=s9++belt+clip
I haven't seen any reviews on the included case with T-Mobile's McLaren edition. Waiting on my McLaren to ship, and I was wondering if I should order a heavier duty case for it. I work in fire/EMS and construction, and I also tend to drop my phone a lot. I currently have a a cheap 2 piece Incipio case on my V30, the one with the soft rubber covered with a hard plastic shell, and I've beat the tar out of it. I've even forgotten it on the bumper of one of our trucks (apx. 2.5ft high), and it fell off in an area we'd have been doing about 45mph through. When we found it using Google's "Find My Phone" thing a couple hours later, it had tread marks across the case and the TGSP was totally shattered. However, my V30 still looks brand new inside the case. I suspect I got incredibly lucky with that though, and wouldn't bet on any case to reliably hold up to something like that. So, barring something catastrophic like that event, will the included case stand up to my rough lifestyle, or should I get a more "rugged" case? Also, semi-related, I've ordered one of the Alinsea almost-full-coverage TGSPs from Amazon. Has anyone tried that one with the included case, and if so, do they play nice together?
The quality of the included case is very good. I work in EMS as well but rarely drop my phone. With the way you describe your work day I would probably get a tougher case. I'm sure the included case would withstand normal falls but I doubt it would do well with significant falls. Hope this helps.
The case is nice, but made for show not toughness. And I've read a post where the user claims the metal from the McLaren logo started to come off and punctured his hand. I think it only offers minimal drop protection.
Got my McLaren, and I'll definitely be getting a different case. It's a shame, considering how slick this included one looks. Also, for anyone interested in the Alinsea TGSP, it's a perfect fit with this case if you line it up perfectly. It's almost entirely invisible, have to look closely to realize there's a screen protector at all. Feels like the unprotected screen too. Any recommendations for a rugged case that looks as nice as the included one?
I'm using the stock case until I find something worth buying on Amazon. Id like a good kickstand case that's 360 protected. The wifeproof case on my pixel XL was awesome.
But even with the stock case, I threw a plate behind it on the back, and I have no issues with the magnetic mount in my car.
Correction, the plate is sitting between the phone and case, with just a piece of tape holding it in place, nothing is seen from the outside.
mmarcz said:
I'm using the stock case until I find something worth buying on Amazon. Id like a good kickstand case that's 360 protected. The wifeproof case on my pixel XL was awesome.
But even with the stock case, I threw a plate behind it on the back, and I have no issues with the magnetic mount in my car.
Correction, the plate is sitting between the phone and case, with just a piece of tape holding it in place, nothing is seen from the outside.
Click to expand...
Click to collapse
Poetic is the closest thing to 360 protection
I have a poetic gaurdian case that does not have a kick stand
Poetic Guardian Series Designed for OnePlus 7T Pro/OnePlus 7 Pro Case, Full-Body Hybrid Shockproof Bumper Cover with Built-in-Screen Protector, Black/Clear https://www.amazon.com/dp/B07ZCBM39X/ref=cm_sw_r_sms_apa_i_Y64fEb3DQ0116
The have another one that has a kick stand poetic revolution
Poetic Revolution Series Designed for OnePlus 7T Pro/OnePlus 7 Pro, Full-Body Rugged Dual-Layer Shockproof Protective Cover with Kickstand and Built-in-Screen Protector, Black https://www.amazon.com/dp/B07ZCC6DZ4/ref=cm_sw_r_sms_apa_i_U74fEb4C5SPSS
toolhas4degrees said:
Poetic is the closest thing to 360 protection
I have a poetic gaurdian case that does not have a kick stand
Poetic Guardian Series Designed for OnePlus 7T Pro/OnePlus 7 Pro Case, Full-Body Hybrid Shockproof Bumper Cover with Built-in-Screen Protector, Black/Clear https://www.amazon.com/dp/B07ZCBM39X/ref=cm_sw_r_sms_apa_i_Y64fEb3DQ0116
The have another one that has a kick stand poetic revolution
Poetic Revolution Series Designed for OnePlus 7T Pro/OnePlus 7 Pro, Full-Body Rugged Dual-Layer Shockproof Protective Cover with Kickstand and Built-in-Screen Protector, Black https://www.amazon.com/dp/B07ZCC6DZ4/ref=cm_sw_r_sms_apa_i_U74fEb4C5SPSS
Click to expand...
Click to collapse
Thank you for the suggestions, I will check them out!
NickWhit1992 said:
Got my McLaren, and I'll definitely be getting a different case. It's a shame, considering how slick this included one looks. Also, for anyone interested in the Alinsea TGSP, it's a perfect fit with this case if you line it up perfectly. It's almost entirely invisible, have to look closely to realize there's a screen protector at all. Feels like the unprotected screen too. Any recommendations for a rugged case that looks as nice as the included one?
Click to expand...
Click to collapse
What brand is your magnetic mount? I tried the same thing with mine, but it barely sticks. Looking for something stronger so I don't have to worry about potholes knocking it off.
Sent from my HD1925 using XDA Labs