Database Users

[Q&A] [ROOT] [RECOVERY: TWRP] [GT-I9300I] [4.4.4] for Samsung Galaxy S3 Neo

Q&A for [ROOT] [RECOVERY: TWRP] [GT-I9300I] [4.4.4] for Samsung Galaxy S3 Neo
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

rod555 said:
Cool! Thanks a lot!
Sent from my GT-I9301I
Click to expand...
Click to collapse
Hello Gurus,
I have a problem rooting my phone (Galaxy s3 neo i9300i)....... Please help me....
I have followed the steps you've said above, But my android version is 4.4...
Now I see that my phone not rooted yet...
But I can go into recovery while switching on my phone.....
I tried to follow the 4.4 rooting as you've mentioned in another post....,
But I was unable to connect my phone to Odin..... when I press home+power+main buttons it goes into recovery.... I tried several times...
No use........:crying:
Please I need your help.............
Thanks in advance......

To boot in downlaod mode use Vol down + home + power

Thanks!!!

Where to put TWRP file in ODIN flashing mode (BL,AP,CP,CSC)? and what must or not be cheked before upload (look the pic):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

hellreaser said:
Where to put TWRP file in ODIN flashing mode (BL,AP,CP,CSC)? and what must or not be cheked before upload (look the pic):
Click to expand...
Click to collapse
You need to put it on AP [emoji6]

cipo3282 said:
You need to put it on AP [emoji6]
Click to expand...
Click to collapse
Ok thanks

Root 4.4.2
Will the 4.4.4 root method work on mine 4.4.2 ?

For root our 4.4.4 Neo without trigger the Knox warranty flag, we need to found a Towelroot exploitable kernel and flash it temporally then root and reflash the original kernel.
I did follow that technique for re-root my Tab Pro after update it.

MagicianPe said:
For root our 4.4.4 Neo without trigger the Knox warranty flag, we need to found a Towelroot exploitable kernel and flash it temporally then root and reflash the original kernel.
I did follow that technique for re-root my Tab Pro after update it.
Click to expand...
Click to collapse
Will surely wait for this!

thanks for the input

Best recovery
Thank you! Working perfect!
I join here just to say thank you!

FUNCIONA !!!
Muito bom, testei no meu [FONT="<font><font>Arial Black</font></font>"]s3 galaxy neo I9003i versão 4.4.4[/FONT] TKS
Very Good, tested it on my galaxy s3 neo I9003i version 4.4.4 TKS

unable in flashing custom rom(cm 12) on gt i9300i kitkat(4.4.4) pls help
failed to flash custom rom(cm 12 uploaded by rox) via twrp in i9300i(4.4.4)it is saying error executing binary in zip,please any one rply,whts d problem?plz help me plzzzzzz

Doesn't work for this neo duo
http://forum.xda-developers.com/galaxy-s3-neo/help/phone-rooted-t3064672
I've already tried this method, and it does nothing apparently for this model.

Shamvu said:
failed to flash custom rom(cm 12 uploaded by rox) via twrp in i9300i(4.4.4)it is saying error executing binary in zip,please any one rply,whts d problem?plz help me plzzzzzz
Click to expand...
Click to collapse
Same here, I posted in a fresh thread but this is what's happening with mine. CM11 did it too.

http://forum.xda-developers.com/gal...overy-t-r-p-samsung-galaxy-s3-neo-gt-t2906840
That will fix it. TWRP 2.7 isn't compatible.

ratdude747 said:
Same here, I posted in a fresh thread but this is what's happening with mine. CM11 did it too.
Click to expand...
Click to collapse
you need to use CWM by rox in order to install CM12 , CM11 istall it from here http://forum.xda-developers.com/gal...overy-cwm-recovery-samsung-galaxy-s3-t2939265

Root Works
hi everyone i want to say that the root is working perfectly
now if everyone has a problem with SuperUser try to update it 1st from playstore then go update the binary ^_^
have a good day

Hello I have the TWRP flashing error. The terminal started me with the stock and not with this custom. Deputy screenshot on my compilation
I can not access the Custom Recovery to flash the removal Script Knox. My email is "[email protected]"

[Q&A] [ROM] Conqueror Rom 1.0 [20F][4.4.2]

Q&A for [ROM] Conqueror Rom 1.0 [20F][4.4.2]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Conqueror Rom 1.0 [20F][4.4.2]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

i'm waiting the 20H based v3 one. i hope this will be very good.

reddsmokee said:
i'm waiting the 20H based v3 one. i hope this will be very good.
Click to expand...
Click to collapse
In 1 or 2 weeks i hope with the support of @ahmed534 (who teach me many things)
I've changed home (i dont know how to say it in english ^^) and it still many things to do, i'll don't have the time for now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Is there Mini View option in this rom?
Wysłane z LG G2 D802 (32GB)

antykat said:
Is there Mini View option in this rom?
Wysłane z LG G2 D802 (32GB)
Click to expand...
Click to collapse
Not at all, I didnt think about it but it's an good idea... I will searching some infos and maybe trying to put it in a v3

It would be great. People with small hands will be happy [emoji6] Thanks.
Wysłane z LG G2 D802 (32GB)

Anyone have a comment for this v3!

bolydah said:
Anyone have a comment for this v3!
Click to expand...
Click to collapse
This thread is not realy usefull because all comments are on the original thread thread since the beginning

Y. Heavenslaughter said:
This thread is not realy usefull because all comments are on the original thread thread since the beginning
Click to expand...
Click to collapse
Sorry Y.Heavenslaughter !
I'm very interested in ur Rom but i can't post on original 'cause I'm a junior member.
And any news about the v3.1 U said on original thread!
thanks

bolydah said:
Sorry Y.Heavenslaughter !
I'm very interested in ur Rom but i can't post on original 'cause I'm a junior member.
And any news about the v3.1 U said on original thread!
thanks
Click to expand...
Click to collapse
No 3.1 yet, i'm waiting some feedback before
For now, the only problem is the additionnal apps : not deleted if you unchecked these in the aroma (but you can delete it after, like an usual app from the playstore)
But i only have a D802, i made all tests on my own device so i cant to test the multi version
If you have a 802, you can flash without problem, you just need to flash the baseband before the rom if you come from a 4.2 firm, the kitkat-fix before the rom if you come from a 5.0 firm, or just the rom if you are already on a 4.4 firm

Y. Heavenslaughter said:
No 3.1 yet, i'm waiting some feedback before
For now, the only problem is the additionnal apps : not deleted if you unchecked these in the aroma (but you can delete it after, like an usual app from the playstore)
But i only have a D802, i made all tests on my own device so i cant to test the multi version
If you have a 802, you can flash without problem, you just need to flash the baseband before the rom if you come from a 4.2 firm, the kitkat-fix before the rom if you come from a 5.0 firm, or just the rom if you are already on a 4.4 firm
Click to expand...
Click to collapse
Thank u 4 ur reply,
Yes!I use D802 32gb on 80220h-eur-xx,i'll flash ur rom this week-end n give u feedback

Hope you'll like this v3

conqueror v.3
Y. Heavenslaughter said:
Hope you'll like this v3
Click to expand...
Click to collapse
Need helps,
boot loop!! i don't know, then i had to flash kdz to bring back my device.
i followed setps n all things are ok with aroma...perahps 'cause of twrp 2.86.1 blastagator???.
Another info : rotted with iroot25, then twrp 2.7.0.0 via autorec uptaded to 2.8.6.1, dorimanx kernel 3.4.107
thank U in advance

What was you last rom before the flash ? AOSP/stock Kitkat or stock Lollipop ?
If you were on stock LP, did you flash the @droidth 's kitkat-fix ?
If you were on stock Kitkat, were you on 20H or an older version ?
Envoyé de mon LG-D802 en utilisant Tapatalk

Y. Heavenslaughter said:
What was you last rom before the flash ? AOSP/stock Kitkat or stock Lollipop ?
If you were on stock LP, did you flash the @droidth 's kitkat-fix ?
If you were on stock Kitkat, were you on 20H or an older version ?
Envoyé de mon LG-D802 en utilisant Tapatalk
Click to expand...
Click to collapse
I'm from D80220h-eur-xx,so i have attention on ur rom, now after bootloop i'm on Fluffy Rom v1 based on 20h waitting to try ur v3.1

I think that's your recovery, try it with a TWRP 2.8.x version minimum
2.8.6.1 is better but for my tests I was on the 2.8.2.1 without problem
Do you have a message error in recovery or just the bootloop ?

Y. Heavenslaughter said:
I think that's your recovery, try it with a TWRP 2.8.x version minimum
2.8.6.1 is better but for my tests I was on the 2.8.2.1 without problem
Do you have a message error in recovery or just the bootloop ?
Click to expand...
Click to collapse
Any error message on recovery, just bootloop.Ok! I try to downgroad 2.8.2.1.
By the way, I flashed FluffyomR v1 via 2.8.6.1

it bricked my lg d802T ... now stuck on fastboot what to do ?
I have D802 img zip file having laf.img and recovery.img and
modem.img etc....should i use it and try to load
img file laf.img and recovery.img through ADB command?
Pls guide me in detail....isnt this rom for D802? i tried version 3.1
my lg g2 was on stock 4.4.2 20D
i used philz recovery for flashing ...

How to change to cloudy or flex theme
Sent from my LG-D802 using Tapatalk

[Q&A] [ROM][5.0.1][30E Stock Base][D802] SKROM V1.0.1 by somboons

Q&A for [ROM][5.0.1][30E Stock Base][D802] SKROM V1.0.1 by somboons
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.1][30E Stock Base][D802] SKROM V1.0.1 by somboons. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Since upgrading to 1.0.1 I now have the same bug I had on Grolla/SimpleRom where, if I'm on 3G, I don't have any signal bars. but on LTE and EDGE I do.
What changed between 1.0.1 and 1.0 that could cause this?
I did a no-data-wipe update (Wiped System, Cache and Dalvik) from Grolla to 1.0, then 1.0 to 1.0.1 and I have had no problems other than the signal bar vanishing (all grey) on 1.0.1 after it had reappeared on 1.0 from Grolla
If you need more info, let me know.

My mistake I forgot packaging modem in 1.0.1 you have to flash SRKROM_1.0.1_Fixed_MODEM before or after flash 1.0.1

Good rom. Keep it up dude.

moneta
Found strange process when was exploring apps - *moneta* !?
Moneta from russian translate - coin. I think it's not native android or lg app or process, what does it for?
It's located at system\app\l001f00002\l001f00002.apk
Name: moneta
Version: 1.0
Name of package: com.skf.l001f00002

somboons said:
My mistake I forgot packaging modem in 1.0.1 you have to flash SRKROM_1.0.1_Fixed_MODEM before or after flash 1.0.1
Click to expand...
Click to collapse
Even with the flashed modem, I don't have signal bars.
Checking with an app like Advanced Signal Status I still had an actual signal.
However, after performing a hot-reboot the signal bars have returned.
Keep up the fantastic work!

good batterr
content://media/external/file/4217

If I want to go back to another Rom like cloudy or an Aosp lollipop can I simply flash the jb boot loader and then flash the Rom?

Marco Caruso said:
If I want to go back to another Rom like cloudy or an Aosp lollipop can I simply flash the jb boot loader and then flash the Rom?
Click to expand...
Click to collapse
B. Restore to your backup ROM.
1. Install Auto Rec for D802
2. Reboot to recovery then flash your old custom recovery and reboot to recovery again
3. Restore your backup file
C. Go back to Stock firmware (without lost data in sdcard)
1. make sure your Backup ROM is stock LG 20A,20B,20C,20D,20F,20H or your current ROM is stock LG
2. Flash firmware KDZ
3. enter to system
4. enjoy

somboons said:
B. Restore to your backup ROM.
1. Install Auto Rec for D802
2. Reboot to recovery then flash your old custom recovery and reboot to recovery again
3. Restore your backup file
C. Go back to Stock firmware (without lost data in sdcard)
1. make sure your Backup ROM is stock LG 20A,20B,20C,20D,20F,20H or your current ROM is stock LG
2. Flash firmware KDZ
3. enter to system
4. enjoy
Click to expand...
Click to collapse
How can I flash a kdz firmware? Thank you

Marco Caruso said:
How can I flash a kdz firmware? Thank you
Click to expand...
Click to collapse
KDZ
TOT

Hi all!
One question...
For update u recommended wipes or clean install?
1st. Backup
2nd. Wipes(data,system,cache & Dalvik)
3rd. Flash modem fix Droidth
4th. Flash SRKROM V1.0.1??
1million of thanks in advance
[emoji16] [emoji106]

ivoxda said:
Hi all!
One question...
For update u recommended wipes or clean install?
1st. Backup
2nd. Wipes(data,system,cache & Dalvik)
3rd. Flash modem fix Droidth
4th. Flash SRKROM V1.0.1??
1million of thanks in advance
[emoji16] [emoji106]
Click to expand...
Click to collapse
Adding
2.1 flash KK bootloader before 3.
Now I am uploading 1.0.2 you can follow in my facebook for download link

Ok thanks,
Now,im waiting for the new version V1.0.2
Awesome Rom Lollipop!!!
Q
I will flash!

ivoxda said:
Ok thanks,
Now,im waiting for the new version V1.0.2
Awesome Rom Lollipop!!!
Q
I will flash!
Click to expand...
Click to collapse
1.0.2 online please follow by my facebook facepage and read instruction before flash

Hello, I have a D805 this rom can work for me? Or I can fall into a brick? Since the D802 and 805 are similar, which partitions changes? or is there some kind of patch to make it work on other models? I am very interested to try this rom

DorekS said:
Hello, I have a D805 this rom can work for me? Or I can fall into a brick? Since the D802 and 805 are similar, which partitions changes? or is there some kind of patch to make it work on other models? I am very interested to try this rom
Click to expand...
Click to collapse
I can make it support D802 but I'm not confirm you can boot or not brick cause I don't have D805 for test.do you want to test ?

i really love the rom. good size, smooth. i think it is so better than simple rom. but i have 2 question from @somboons
1. how can i free more space from system data in misc storage which is 5.73gb in mine???? in cloudyfa 2.2 it is 3.73gb.
2. i have wifi drop sometimes. is it a known issue?

sinsinasheyton said:
i really love the rom. good size, smooth. i think it is so better than simple rom. but i have 2 question from @somboons
1. how can i free more space from system data in misc storage which is 5.73gb in mine???? in cloudyfa 2.2 it is 3.73gb.
2. i have wifi drop sometimes. is it a known issue?
Click to expand...
Click to collapse
I think it's a display bug or samething is not system data,try use terminal emulater and df command like picture as below
system data of LG G2 around 2.7G ,it is not 5.7GB or 3.73GB on CloudyG2 ROM
For wifi I think depend on kernel now it is a little bug.No problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

somboons said:
For wifi I think depend on kernel now it is a little bug.No problem
Click to expand...
Click to collapse
But i think it is with this rom. i used simple rom 1.2 for 3weeks without any wifi drop. if it is possible please look into it,maybe you can use simple rom kernel instead of this. is it possible?

[Q&A] [ROM] Stock 30d flashable zip

Q&A for [ROM] Stock 30d flashable zip
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Stock 30d flashable zip. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

somboons said:
Flashable zip make from VDF KDZ that support 16 and 32 GB version.
Download link D80230d_droidth.zip :
http://bit.ly/1F4tQEV
Rooted / Debloated / Contain all Lollipop partitions / flash via Custom recovery
BACKUP DATA BEFORE......
We can flash on jellybean or any KitKat current ROM.After flash this zip custom recovery have lost.
@bender_007 ,He is working new AutoRec for LP .Don't worry it's coming soon we have custom recovery :laugh:
TIP..
- Enable 4G LTE Delete /system/app/LteConfigs.apk
- Install SELinux Mode Changer if doesn't delete files in SDCARD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Would really like to try but my g2 is my daily driver. Anybody else brave enough to try this out? I can test battery and performance later once I know I won't brick my baby on first try.

Actually im using cyanogenmod 12. Can i flash this ROM with no problems? Thanks
Sent from my LG-D802 using XDA Free mobile app

Mirror please !!! I can not download this file.

Selinux
Selinux to delete the lteconfigs.apk didnt work for me but I did find a work around. Just move the lteconfigs folder from /system/app/ to sdcard and delete from there. Problem solved.

Where that follows eur v30d or v30a?
Thanx

What is the difference between 30a and 30d version? Thanx

Can I flash this rom from CM12? Is there any problems with it?

TheBerebian said:
Can I flash this rom from CM12? Is there any problems with it?
Click to expand...
Click to collapse
You can.

Answer about LED Light and Language
This rom is version 30D of D802?
After flash ít has power led light?
It has a Vietnamese in language?
Thank you so much about your help...

used 802c rom...running nicely on D802 international....seems pretty smooth too..
thanks

Hello, I'm on cloudy G3 2.2
now on TWRP 2.7.0.0 - how can I update it to 2.8.6.1? Just normally flash via currently used TWRP?

hello someone can upload v30a boot.img for me please?

Do i have to have root to flash a rom
Im a noob never tinkered with root but i want lollipop so do i need to have root to flash this

[Q] Can I use it?
Can I use it on D802 16 GB 6MP/TMN version?

Currently im on cloudys g3 2.2 with latest philz recovery. Right way should be to Flash twrp bump than Flash this Rom? Anything more? Read about this f2fs thing.its a must have thing or can be?

Version compatibility question
Has anyone tried flashing this on the D805 version of the g2? Would there be any issues?

HackerxX said:
Im a noob never tinkered with root but i want lollipop so do i need to have root to flash this
Click to expand...
Click to collapse
Just get the kdz and flash it via flash tool then. Or even try updating via PC suite.

It was easy. As long as you can sacrifice your data inside the phone.( if you willing to manually backup, it will be fine later)
1. Downgrade D802 using Flash tools 2014 to version D80220C or other KK version (CSE mode)
2. Root your phone and install Autorec. Download latest Twrp 2.8.6.1 put it inside download folder
3. Reboot into recovery using Autorec. Then go to download folder, Flash TWRP 2.8.6.1 on recovery.
4. Now reboot to recovery, you will be in 2.8.6.1 not 2.7.0.0 version
4. Clear/wipe system, cache, dalvik, and data. Flash the lollipop Rom from this thread.
5. Viola! All done without bootloop.

Answers about LED Light and Language
This rom is version 30D of D802?
After flash ít has power led light?
It has a Vietnamese language in 30D?
Thank you so much about your help.. @somboons

[Q&A] [ROM][STABLE][TW][5.0.2][09.08.15][SM-G901F] NovaRom V1.0

Q&A for [ROM][STABLE][TW][5.0.2][09.08.15][SM-G901F] NovaRom V1.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][STABLE][TW][5.0.2][09.08.15][SM-G901F] NovaRom V1.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Tkkg1994 I'm already downloading to test and provide feedback

kaducomk said:
Tkkg1994 I'm already downloading to test and provide feedback
Click to expand...
Click to collapse
I have bought this device a few days ago, hope you like my rom dude

hello, I'm also developing a rom, and I wanted asks if you know why this error on my keyboard (spell check)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
---------- Post added at 08:15 PM ---------- Previous post was at 08:02 PM ----------

kaducomk said:
hello, I'm also developing a rom, and I wanted asks if you know why this error on my keyboard (spell check)
Click to expand...
Click to collapse
Which Keyboard are you using? Do you have a github page with your current rom? So I could look at it?

Just Perfect!
andd thats how we make a perfect ROM with port!
i think its the first stablest en bug free s6 port rom for the G90**
i realy wanna try this rom but i got the G900F :S
can you port this ROM for the G900F ? that will be great!
GOOD JOB!

@Tkkg1994 use your rom being able to take in galaxy s5 could g900m and other variants?

rientkill1 said:
andd thats how we make a perfect ROM with port!
i think its the first stablest en bug free s6 port rom for the G90**
i realy wanna try this rom but i got the G900F :S
can you port this ROM for the G900F ? that will be great!
GOOD JOB!
Click to expand...
Click to collapse
the problem is that: sm-900f features different hardware as; processor and gpu. This are big differences. I would have to make an other rom, based on sm-900f release
kaducomk said:
@Tkkg1994 use your rom being able to take in galaxy s5 could g900m and other variants?
Click to expand...
Click to collapse
Same answer as above sadly

Hi guys i have a probem i flash like the tuto but i have a bootlop i use the twrp
i came from a TW 5.0.2 NEE official
why my S5 don't start
thanks guy
sorry i'm a french user ^^

Im also getting bootloops Do we need to be on BOE2 Base for the ROM to install correctly?

def30 said:
Hi guys i have a probem i flash like the tuto but i have a bootlop i use the twrp
i came from a TW 5.0.2 NEE official
why my S5 don't start
thanks guy
sorry i'm a french user ^^
Click to expand...
Click to collapse
MobyDck said:
Im also getting bootloops Do we need to be on BOE2 Base for the ROM to install correctly?
Click to expand...
Click to collapse
Only thing that will not let your device boot is modem, bootloader or corrupt zip file. Nothing else can it be

Install a BOE2 ROM as a base then it will work... Im using it now

@Tkkg1994 I mean, if a port of this rom is possible, for g900m and other variants, if possible I try to do

MobyDck said:
Install a BOE2 ROM as a base then it will work... Im using it now
Click to expand...
Click to collapse
I updated to OP concerning it, thank you.
kaducomk said:
@Tkkg1994 I mean, if a port of this rom is possible, for g900m and other variants, if possible I try to do
Click to expand...
Click to collapse
Yes it is possible, but you have to use your boot.img or an kernel build for your device, because of Snapdragon 805 and 801.

@Tkkg1994 only the exchange of kernel is already possible to plug in my device?

kaducomk said:
@Tkkg1994 only the exchange of kernel is already possible to plug in my device?
Click to expand...
Click to collapse
No of course not, but this is really a MUST, without that it will not start for sure, but you may have to use the ramdisk of the SM-G901F and the zImage from your device, you have to try that out and develop a personal kernel would be better

@Tkkg1994 more so I can use your rom based, to pick up on my device?

kaducomk said:
@Tkkg1994 more so I can use your rom based, to pick up on my device?
Click to expand...
Click to collapse
Tell me what knowledge you got, how many roms and kernel you already build and then I will tell you if you can maybe do it or not

@Tkkg1994 I have 3 projects, 2 based on stock rom, and one is a port!!

Unable To Restore From Samsung Account
Hi, I've just installed NovaRom for Samsung s5 901F. It's running smooth so far, but I'm concern about Restore Samsung Account function which is not working .
I'm getting : "Download Failed" , "Failed to complete download due to network error"
I've restored all application by Google Play successfully, only Samsung Account Restore is not working.
Any advice on this?
PS: The Rom it's looking promising.
Thank you,
Marius