I've reset my Droid Pro to factory and was finally able to root using the Gimli expliot via Framaroot.
My problem now is that any time I try to use wifi, the phone reboots. It will connect to a hotspot, display full wifi bars yet it is unable to connect to the internet.
I am trying to install CM7 by vanillalvl but cannot install Clockwork Mod to be able to get into the recovery menu to install the rom.
InsanityChicken said:
I've reset my Droid Pro to factory and was finally able to root using the Gimli expliot via Framaroot.
My problem now is that any time I try to use wifi, the phone reboots. It will connect to a hotspot, display full wifi bars yet it is unable to connect to the internet.
Click to expand...
Click to collapse
Interesting issue...
I am trying to install CM7 by vanillalvl but cannot install Clockwork Mod to be able to get into the recovery menu to install the rom.
Click to expand...
Click to collapse
Download Droid2 bootstrap recovery and this will take you to Clockwork mod recovery!
Enjoy!!
Related
I have done the one step root and it doesnt seem to work. I go to superuser permissions and it just force closes. This phone was rooted before perfectly fine with the same method. Even SetCPU doesnt open. Its always that dumb superuser force close.
EDIT: I dont have any one click root errors or any other errors while in samsung recovery. It said it applied the update when I go to reinstall packages. No errors whatesoever.
EDIT: I tried the 1.5.5 and it just gets stuck in the loop and says to disable usb debugged. I unplugged phone and disabled usb debugging but when I do that it gets stuck on waiting for device.
Have you used Z4root its not on market anymore but here is a link for it
http://www.4shared.com/file/HvJ7Anrq/z4root130.htm
Sent from my SGH-T959 using XDA App
Double post sorry
you can also use the OCLF app to root, thats what i always use
It worked with z4root but now how do I flash my cyanogenmod on it? I did the install rom from sd card and it took me to samsung recovery.
Eric-1987 said:
It worked with z4root but now how do I flash my cyanogenmod on it? I did the install rom from sd card and it took me to samsung recovery.
Click to expand...
Click to collapse
You have to install clockworkmod, then click reboot to recovery, click install from packages, then should be good (if it doesn't go to clockworkmod after that, reboot, and repeat). I have rooted several of these bad boys for co-workers the last couple weeks, and found clockworkmod didn't always take first time through as it does on other devices I have modded.
I flashed the galaxy s cm6.1.2 beta 1 and it gets stuck on boot screen and says Galaxy S GTI9000. I cant get to recovery by holding the volume key up. I dont know what to do now.
Please help...possible brick
Hi, I have possibly bricked my xoom...the good news is still goes into recovery, unfortunatley, i have no idea how to fix it....
ok, here are the chain of events...last night I unlocked and rooted via adb...worked flawlessly..
Installed Tiamat-Xoom-Rom-2.0-Manta-Ray...worked flawlessly, i did do a nandroid backup
installed the update 2.1....worked flawlessly
i pushed the ad-hoc via /wpa_supplicant...it was working last night
during my lunch today i fired up the xoom and connected my wifi tether from my revo to the xoom and I could only go to websites and could not access data through apps...here is where I screwed up...I flashed a zip of the ad-hoc and that didn't work either...Then I screwed up more and tryed to reflash the tiamat rom and rebooted.....
fires up the the dual core logo and stays there...
tried a recovery of my backup and the boot recovers but get error message on all the others backed up....
I can reboot into into recovery, and get adb access in recovery, but everytime i try to go to fast boot it knocks off my usb access and gets stuck...cant push anything after that.
anyone have any ideas how I can save this thing? any help would be so appreciated!
Per the thread started by generic.imitation q and a....
the SBF file from Multiupload is no longer there,,,i did get the latest version of RSD Lite (4.9) ....if anyone know how to get the sbf fine, please let me know and maybe some directions on how to use the rsd lite program....
Thanks again....I am worried!
jphillips.hd88 said:
Please help...possible brick
Hi, I have possibly bricked my xoom...the good news is still goes into recovery, unfortunatley, i have no idea how to fix it....
ok, here are the chain of events...last night I unlocked and rooted via adb...worked flawlessly..
Installed Tiamat-Xoom-Rom-2.0-Manta-Ray...worked flawlessly, i did do a nandroid backup
installed the update 2.1....worked flawlessly
i pushed the ad-hoc via /wpa_supplicant...it was working last night
during my lunch today i fired up the xoom and connected my wifi tether from my revo to the xoom and I could only go to websites and could not access data through apps...here is where I screwed up...I flashed a zip of the ad-hoc and that didn't work either...Then I screwed up more and tryed to reflash the tiamat rom and rebooted.....
fires up the the dual core logo and stays there...
tried a recovery of my backup and the boot recovers but get error message on all the others backed up....
I can reboot into into recovery, and get adb access in recovery, but everytime i try to go to fast boot it knocks off my usb access and gets stuck...cant push anything after that.
anyone have any ideas how I can save this thing? any help would be so appreciated!
Per the thread started by generic.imitation q and a....
the SBF file from Multiupload is no longer there,,,i did get the latest version of RSD Lite (4.9) ....if anyone know how to get the sbf fine, please let me know and maybe some directions on how to use the rsd lite program....
Thanks again....I am worried!
Click to expand...
Click to collapse
First of all, if you can get into recovery you are nowhere near bricked. You will find a solution.
It sounds to me like you need to download the full stock image and flash it via fastboot so first priority is to get that up and running. You can download the files from Motorola and there are several good threads on how to install them and/or use adb.
Sent from my GT-I9000 using XDA Premium App
rschenck said:
First of all, if you can get into recovery you are nowhere near bricked. You will find a solution.
It sounds to me like you need to download the full stock image and flash it via fastboot so first priority is to get that up and running. You can download the files from Motorola and there are several good threads on how to install them and/or use adb.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Thanks for getting back to me....Thats what I'm thinking...i figure if i can get into recovery im good
but.......
I have the image files ready to go, i just cant get them flashed. i can open adb in recovery, but as soon as I reboot bootloader, it boots to flashboot and i lose adb access and cant figure out to get it back....i know i have the right drivers....
Ive tried to push through rsdlite, but i get a error when I start the flash..I have the thegiftoftheregion sbf files, but those are for hri39, and i cant find the hri66 sbf
Im at a complete loss!
Again, any help would be greatly appreciated.
Im at a loss
Got it! I was able to push adb thru recovery without fastboot...still havent figured out how...
Sent from my VS910 4G using XDA Premium App
Hey guys I need some help here. I just rooted my droid x and installed the koush recovery as stated in the noobs guide to the droid x. i was able to boot into recovery and clear my data and cache and I installed Gingerale 3.0.
Well I cant get wifi tethering to work so I need to install a WUG's patch. Problem is, I cant seem to boot into koush's recovery anymore. I installed it again on the new rom and tapped bootstrap recovery and it said success. Then I tapped reboot recovery and my phone rebooted. The M came up then all I get is black screen with the backlight on. I have waited 15 minutes and same thing. I have to pull the battery and reboot. I can not for the life of me figure out why I cannot boot into clockwork.
I could use some help. Thanks.
Franteeko said:
Hey guys I need some help here. I just rooted my droid x and installed the koush recovery as stated in the noobs guide to the droid x. i was able to boot into recovery and clear my data and cache and I installed Gingerale 3.0.
Well I cant get wifi tethering to work so I need to install a WUG's patch. Problem is, I cant seem to boot into koush's recovery anymore. I installed it again on the new rom and tapped bootstrap recovery and it said success. Then I tapped reboot recovery and my phone rebooted. The M came up then all I get is black screen with the backlight on. I have waited 15 minutes and same thing. I have to pull the battery and reboot. I can not for the life of me figure out why I cannot boot into clockwork.
I could use some help. Thanks.
Click to expand...
Click to collapse
Try downloading ROM Manager from the Market. Once you open it up click Flash Recovery and select Droid X. Now try to boot into recovery from ROM Manager.
Thanks for the reply. I have done as you said and still no dice. The phone reboots, the M comes up then screen goes black with the backlight on and thats it. Any other ideas?
Franteeko said:
Thanks for the reply. I have done as you said and still no dice. The phone reboots, the M comes up then screen goes black with the backlight on and thats it. Any other ideas?
Click to expand...
Click to collapse
You might have to sbf.
I had the same problem. I installed the droid 2 recovery and got out back finally....
Sent from my DROIDX using XDA Premium App
I dont have a problem sbfing but I would hate to do that if its just going to happen again. A quick search on this forums brings up tons of results of people having the same issue and i have not been able to find a solution for it.
Any ideas?
Have you tried stock recovery? And you have d2 bootatrapper?
Sent from my DROIDX using XDA App
Now you need D2 bootstrap, DX doesn't work on GB
Sent from my DROIDX using XDA Premium App
ok so i rooted my phone with revolutionary it turned s off but i tried using rom manager and it cant gain root access i have also tried other apps that require root and same problem any ideas on what i can do? EVO 4G
djdj88 said:
ok so i rooted my phone with revolutionary it turned s off but i tried using rom manager and it cant gain root access i have also tried other apps that require root and same problem any ideas on what i can do? EVO 4G
Click to expand...
Click to collapse
download this file http://downloads.androidsu.com/superuser/su-bin-3.0.3.2-efghi-signed.zip transfer it to sdcard go into recovery flash the binary then reboot and your root troubles will go away
thanks man i was using the wrong version of superuser
Hi, im facing a wifi issue on CM10 (i flashed from v10k). 3g seems to work fine, but everytime i try to connect with wifi - it just goes "enabling wifi", and nothing happens - then wifi ON/OFF switch goes to gray.
Anyone with the same issue or know how to solve it perhaps?
Cheers!
I notice i have same error but my rom is cyanmod last version!i have installed first, v10k with bootloader unlocked an rooted and then from cwm recovery i have reset default settings .Now i can't open wifi,only a grey buton.
Sent from my LG-P700 using xda premium
I found the solution for this issue:you moust reinstal in cmw recovery baseband v10k.
https://www.dropbox.com/s/75t4nkabaymdb9s/v10Baseband.zip
Credits to a russian people from 4PDA.Me just reuploaded.
Sent from my LG-P700 using xda premium
are you downgraded from V20 to CM10?
maybe you should flash the baseband
I've instaled v20d when apperead,but i use this stock rom about 1-2 days.After this terrible experience i've instaled cyanmod and v10k baseband.My problem with wifi started when i've instaled v10k(Homero zip version), then cyanmod.
Sent from my LG-P700 using xda premium
CM10 Wifi / 3G
Hi all,
I just flashed CM 10 to my p700 and now my wifi and 3g aren't working at all.
I tried to setup my APN several times but these settings can't be saved for some reason.
When pressing the WIFI icon it shows that it is turned on but it isnt receiving or transmitting (I can't see it in my home network.)
Next step is going back to V20D_00_m
MJBBRU said:
Hi all,
I just flashed CM 10 to my p700 and now my wifi and 3g aren't working at all.
I tried to setup my APN several times but these settings can't be saved for some reason.
When pressing the WIFI icon it shows that it is turned on but it isnt receiving or transmitting (I can't see it in my home network.)
Next step is going back to V20D_00_m
Click to expand...
Click to collapse
Hello,install baseband in CWM recovery(Look up,i posted this baseband).
bogdan109 said:
Hello,install baseband in CWM recovery(Look up,i posted this baseband).
Click to expand...
Click to collapse
I tried to get in CWR but somehow it doesn't work.
I will give it another try with your baseband.
First I need to get in CWR mode.
But thanks :good:
MJBBRU said:
I tried to get in CWR but somehow it doesn't work.
I will give it another try with your baseband.
First I need to get in CWR mode.
But thanks :good:
Click to expand...
Click to collapse
If you instaled cyanmod,you can enter in recovery.Steps are:
1.Turn off the phone
2.Keep push Home +VUPVOLDOWN(center) +Power
Phone will vibrate an CWR appears.
I tried this key combination but it didn't work.
Just flashed to V20D_00_m by KDZ
Now it doesn't get past the lg boot screen i'll fix this first.
In the end I want to run CM10 on this device.
MJBBRU said:
I tried this key combination but it didn't work.
Just flashed to V20D_00_m by KDZ
Now it doesn't get past the lg boot screen i'll fix this first.
In the end I want to run CM10 on this device.
Click to expand...
Click to collapse
Belive me,Cyanmod is much better.If you whant to pass boot logo,must hard reset phone .Here: :good:http://www.hard-reset.com/lg-optimus-l7-p700-hard-reset.html
bogdan109 said:
Belive me,Cyanmod is much better.If you whant to pass boot logo,must hard reset phone .Here: :good:http://www.hard-reset.com/lg-optimus-l7-p700-hard-reset.html
Click to expand...
Click to collapse
And yes there was the CWM recovery screen.
Thanks for your assistance:good::good:
I'm learning it the hard way.
Update: Currently running CM10
MJBBRU said:
And yes there was the CWM recovery screen.
Thanks for your assistance:good::good:
I'm learning it the hard way.
Update: Currently running CM10
Click to expand...
Click to collapse
3G and WIFi work now?
bogdan109 said:
3G and WIFi work now?
Click to expand...
Click to collapse
Yes they do :good::good:
Now It's importing my data from google even if I turn off WIFI
Thanks again
MJBBRU said:
Yes they do :good::good:
Now It's importing my data from google even if I turn off WIFI
Thanks again
Click to expand...
Click to collapse
For Backup an restore i use Wondershare MobileGo for Android.Is a good program.I recomand you.
Cheers!:good: