I did brick my device and was trying to find stock firmware to return to stock via odin, but couldnt find it. Finally i got it from sammobile after so many attempts. I thought some of you are looking it too. So i uploaded it to google drive and here is link.
Flash it via Odin. Its 4.0.4 so after you odin you have to update it.
https://docs.google.com/file/d/0B03Jqpys5pZHNkZiUi1pMVh1RWc/edit?usp=docslist_api
Thank you so much
I was searching for the same reason !
I am downloading now.
I hope is for WiFi 16 G variant of 8013.
All my best to you !
Thanks! I was looking all over for this too.
Thanks!
Was pulling my hair out for this! Yours is the last legit link on the internet for the n8013!
Glad i could help. Yes its for 16 gig version.
bikrame said:
I did brick my device and was trying to find stock firmware to return to stock via odin, but couldnt find it. Finally i got it from sammobile after so many attempts. I thought some of you are looking it too. So i uploaded it to google drive and here is link.
Flash it via Odin. Its 4.0.4 so after you odin you have to update it.
https://docs.google.com/file/d/0B03Jqpys5pZHNkZiUi1pMVh1RWc/edit?usp=docslist_api
Click to expand...
Click to collapse
Did you manage to fix your bricked device? Mine brick too (stuck on boot loop, unable to enter recovery mode).
wiien said:
Did you manage to fix your bricked device? Mine brick too (stuck on boot loop, unable to enter recovery mode).
Click to expand...
Click to collapse
Yes. To flash via odin you need download mode not recovery. I was also not able to enter on recovery but was able to enter download mode.
bikrame said:
Yes. To flash via odin you need download mode not recovery. I was also not able to enter on recovery but was able to enter download mode.
Click to expand...
Click to collapse
can you guide me to unbrick my device? I'm afraid of doing something wrong with it. thank you
wiien said:
can you guide me to unbrick my device? I'm afraid of doing something wrong with it. thank you
Click to expand...
Click to collapse
Here it is . For firmware use one from my link.
http://rootgalaxynote.com/galaxy-note-10-1-2/how-to-unrootunbrick-galaxy-note-10-1-factory-firmware/
Hi, my tablet Samsung Galaxy Note 10.1 N8013 is also bricked, I mean when I try to start it, it just shows the Samsung logo and then it turns off, then again the Samsung logo, and that happens always.
I followed all the steps of the link you gave with your 8013 firmware (I loaded it on the AP option) and it showed me the ''Pass'' message but after the reboot, it just shows me the ''Samsung'' logo with his ''blue'' thing flashing and then nothing happens.
What I have to do now?? I'm very sad about all of this... I did the recovery thing before that but it didn't work as well.
Thanks
EDIT: I was really desperate, but I think the final step was putting the ''recovery mode'' (Turn on/off button + volume up) and then doing the ''factory reset''.
It's solved for me... Really appreciate your help Bik
You rock man!!!
bikrame said:
I did brick my device and was trying to find stock firmware to return to stock via odin, but couldnt find it. Finally i got it from sammobile after so many attempts. I thought some of you are looking it too. So i uploaded it to google drive and here is link.
Flash it via Odin. Its 4.0.4 so after you odin you have to update it.
https://docs.google.com/file/d/0B03Jqpys5pZHNkZiUi1pMVh1RWc/edit?usp=docslist_api
Click to expand...
Click to collapse
I was just about to put one of my n8013 tabs up cause I needed to go back to stock to fix screen rotation, and there is no way I will spend money at a site to basically buy something they got for free. One was so scary that it didnt even have https. I'll stick this on AFH in a bit and edit this with link. That way when google eventually shuts yours down, users can still get a safe and reliable copy of firmware for their device. Thanks again, and I certainly pushed that button for you
FYI: For users, this is 4.0.4 ICS, yeah thats old school. It works fine though, and corrected my screen rotation issue. It was probably a file in lib, but fixed now, and this is for the WiFi version of the GT-N8013. Im going to add some Custom ROM in the directory where you can download this firmware also. I have CM 10.1 thru CM 12 and Hyperdrive i believe, so enjoy and let me know if it helps you. Also have pa.gapps for most versions.
Download Link for N8013UEALI3_N8013XARALI3_XAR (1).zip
https://www.androidfilehost.com/?fid=24052804347851039
In 2019, when this tablet is almost 10 years old, I'm super thankful. The download link STILL works, although it flashed through ODIN with PASS, it didn't seem to fix my stuck logo issue.
I was stuck in a bootloop and this stock firmware fixed it. This is the only place I could find the stock firmware. Updato.com has a download cap of 80kpbs and i dont think sammobile is any better. Plus, all the links in the pins and 99% of the link in this forum to this stock firmware are broken. This link should be pinned IMO.
I'm going to bump this. This should be pinned as one of the only working downloads for stock firmware which is super handy to fix commonly bricked galaxy notes. Hopefully some poor soul won't spend hours going through hundreds of broken links to get to this one, like I had to.
as the username suggests, I am a noob at this and I have a GT-N8013EAYXAR thats been broken for a few years now... welll comes CoVID and WFH and I have some time to try to ressurect this old ToDo project... So far seems like this stock ROM image mentioned here is what I need to start with, but none of the links work ...
So if some one still has the image can you please upload it some place?
sammobile.com samsung-updates
and many others for firmware
are there updated instructions anywhere? I'm stuck in reboot hell. I can get to downloader mode. I tried flashing the stick image, and odin said passed, and on the tablet itself I saw the bar get bigger and bigger, but when that finishes and it should boot to system, it goes back to reboot hell.
JJEgan said:
sammobile.com samsung-updates
and many others for firmware
Click to expand...
Click to collapse
I posted in here like 6 years ago and solved this issue, but now the tablet seems to have randomly bricked again and now I can't find a link for the GT N8013 stock firmware... The one I found is "KIES_HOME_N8013UEUCOI1_N8013XARCOI1_813049_REV00_user_low_ship.tar.md5" but it seems a little fishy.
The link on Sammobile is locked so I can't download it.
marianito10 said:
I posted in here like 6 years ago and solved this issue, but now the tablet seems to have randomly bricked again and now I can't find a link for the GT N8013 stock firmware... The one I found is "KIES_HOME_N8013UEUCOI1_N8013XARCOI1_813049_REV00_user_low_ship.tar.md5" but it seems a little fishy.
The link on Sammobile is locked so I can't download it.
Click to expand...
Click to collapse
Hi, I bought a new mobo and needed to pass stock firmware, I'm from Brazil and there's a website called stockrom, this is the link for N8013 XAR
Note 10.1 GT-N8013 XAR 4.1.2 Jelly Bean Stock Rom, Tutorial Instalação
Download Firmware + Odin + Tutorial para Instalação Stock Rom Galaxy Note 10.1 GT-N8013 XAR 4.1.2 Jelly Bean Loop, Boot Infinito ou Hard Reset no Note 10.1
www.stockrom.net
Google Drive - Virus scan warning
drive.google.com
Matheustrindade said:
Hi, I bought a new mobo and needed to pass stock firmware, I'm from Brazil and there's a website called stockrom, this is the link for N8013 XAR
Note 10.1 GT-N8013 XAR 4.1.2 Jelly Bean Stock Rom, Tutorial Instalação
Download Firmware + Odin + Tutorial para Instalação Stock Rom Galaxy Note 10.1 GT-N8013 XAR 4.1.2 Jelly Bean Loop, Boot Infinito ou Hard Reset no Note 10.1
www.stockrom.net
Google Drive - Virus scan warning
drive.google.com
Click to expand...
Click to collapse
Ok that's the same one I had, so I guess it's the official one. Anyway I flashed the stock rom with Odin, but I still can't access Recovery Mode. TeamWin logo appears briefly and then the tablet goes back to the bootloop.
Related
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
Thanks buddy for helping me, got me up and running again :good:
You're welcome, mate!
Softbrick
Thank you thank you thank you thank you .
I always liked Hong Kong roms on note one and two and I thought I can continue the tradition .
Softbricked it , and no solution anywhere . I installed this and voila . Back in business . I also installed MJ7 on top now all is good .
Have I said thank you ?
Well thank you !
budalica said:
Thank you thank you thank you thank you .
Have I said thank you ?
Well thank you !
Click to expand...
Click to collapse
You're welcome. Did you press the "Thank you" button?
Thanks a lot. Without your post, my phone will still be bricked.
hh
That day! ! Me too
Useful info, I'm sure this will be of use in many situations.
Thankyou.
Sent from my GT-I9100 using Tapatalk 4
uscool said:
Thanks buddy for helping me, got me up and running again :good:
Click to expand...
Click to collapse
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
lalahamid said:
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
Click to expand...
Click to collapse
Here is the newer version from UK BTU: N9005XXUDMJ7_N9005OXADMJ4_BTU.zip
http://terafile.co/29f621508415
doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/show....php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread that new bootloaders might help... Any guidance will be appreciated. Thanks
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
doclucas said:
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
Click to expand...
Click to collapse
Why did you suggest X-Note but not another ROM?
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always
replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Nope, I didnt mean what is the best rom to use.
The problem is that how to bypass the bootloop issue.
pyarajaani said:
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
Click to expand...
Click to collapse
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
doclucas said:
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
Click to expand...
Click to collapse
yes...I did that n installed X note rom from cwm. BUT I suspect that cwm is not fully functional. Why I m saying this is that I have a nandroid backup of bobcat mj7 rom...which cwm isn't able to detect even. ..nevertheless. .cwm is installed.
1) Which CWM version do you have installed?
2) Did you do a full wipe/factory-reset?
3) Did you try also advanced formatting (of system partition together with the full wipe) and then install the ROM?
4) Did you try all the above with the latest TWRP recovery instead of CWM?
http://forum.xda-developers.com/showthread.php?t=2467255
Try to flash this file by cwm first and then flash any rom after you want
https://www.dropbox.com/s/bibytggk2m8npw8/Brick_Loop_FIX_Fix.zip
Sent from my SM-N9005 using Tapatalk
Hi !
Pls help with S3 neo 4.4.4.
I try few roms from Samsung but no success
first time I download with OTA update but when phone is get update ... I get odin screen with DOWNLOADING... with the message " could not do normal boot"
then I put back 4.3 with odin official update and the pone is working...
then I try few roms 4.4.4. official (India Kazakhstan Hon Kong) but no success always the same (odin) screen after update.
What I do wrong ?
now running 4.3 :crying:
GT-I9300I
s3ve3gub
I9300IUBUAND1
MSM8228
I have the same problem
I have the same problem. my phone is identical to yours April 2014 I9300IUBUAND1 I9300IUUBAND1 I9300IUBUAND1 4.3 Product Code: TTT--- I hope someone has a solution for our problem
Pls need solution or tip how to update my GT-I9300I Neo+ to Kitkat 4.4.4 ......
Here is my problem...I rooted my s3 neo gti9300i using towelroot and it worked ...I also didn't flash any custom recovery.. I bought my phone in june...its my first android phone...but nw I can't update as my device status is "MODIFIED"...I installed xposed and changed my device status to "OFFICIAL" using wanam xposed...I got the latest update 4.4.4...I downloaded but when it booted its self and started installing an "ERROR"...so I removed xposed and unrooted my phone using supersu...then again tryied nw ..not possible to get update server say that my system is modified...what to do nw...pls help...its my 1st phone..?
I believe it is in need of repartition. Some partition from the Rom you're trying to install exceeds current partition size.
So either find the correct update for your region (which I strongly advise) Either try it by ticking repartition( do it your own risk) which is not advisable as you might end up bricking the phone.
You need a pit file for repartition.
mariosraptor said:
I believe it is in need of repartition. Some partition from the Rom you're trying to install exceeds current partition size.
So either find the correct update for your region (which I strongly advise) Either try it by ticking repartition( do it your own risk) which is not advisable as you might end up bricking the phone.
You need a pit file for repartition.
Click to expand...
Click to collapse
whether they can pit file for Europe and rom for Kazakhstan because I found the pit to Europe. my phone is I9300IUBUAND1 I9300IUUBAND1 I9300IUBUAND1 4.3 Product Code: TTT Trinidad and Tobago.
Any solution for mine...
My phone is also S3 Neo + but is plus version with 1.4 CPU ... it is the first version for china jan 2014 .... all updates 4.3 is OK for him from Samsung firmwares .... but i cant update for 4.4 .... i always after any update get the android screen and after that Odin screen with downloading and message with cant do normal boot .... and cant go to recovery only flash back with 4.3....
Its my phone soft bricked ? I try also wit pit file and firmware flash but nothing.... the same situation ....
Pls help
nattila said:
My phone is also S3 Neo + but is plus version with 1.4 CPU ... it is the first version for china jan 2014 .... all updates 4.3 is OK for him from Samsung firmwares .... but i cant update for 4.4 .... i always after any update get the android screen and after that Odin screen with downloading and message with cant do normal boot .... and cant go to recovery only flash back with 4.3....
Its my phone soft bricked ? I try also wit pit file and firmware flash but nothing.... the same situation ....
Pls help
Click to expand...
Click to collapse
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
moro89 said:
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
Click to expand...
Click to collapse
The fanny thing is that .... I do have a functional phone with official Samsung firmware but its 4.3 .... I flashed almost every 4.3 on him all is working .... also try to root ..... flash recovery .... its all OK on 4.3
But when I come to 4.4.4 official firmware .... its refuse to boot ....
I try OTA update .... try KIES ... ODIN .....
always the same scenario .... after flash phone restarted ... I get the first screen with Samsung logo ... after its boot to odin with red message cant do normal boot... and don't let me to recovery (volume up+home) only to download (volume down+home)
Its weird
nattila said:
The fanny thing is that .... I do have a functional phone with official Samsung firmware but its 4.3 .... I flashed almost every 4.3 on him all is working .... also try to root ..... flash recovery .... its all OK on 4.3
But when I come to 4.4.4 official firmware .... its refuse to boot ....
I try OTA update .... try KIES ... ODIN .....
always the same scenario .... after flash phone restarted ... I get the first screen with Samsung logo ... after its boot to odin with red message cant do normal boot... and don't let me to recovery (volume up+home) only to download (volume down+home)
Its weird
Click to expand...
Click to collapse
Send it to Samsung... They definitely know how to put Kitkat on your device!
Are u sure you are downloading right firmware for your device since there are few variants around here, and mayb kitkat is not released for your variant ...
As i can see on samsung update page there is only one 4.4.4 for your device variant (s3ve3gUB)
http://samsung-updates.com/device/?id=GT-I9300I
It is : I9300IUBUBNJ1 ,so try flashing that one
Rox said:
Are u sure you are downloading right firmware for your device since there are few variants around here, and mayb kitkat is not released for your variant ...
As i can see on samsung update page there is only one 4.4.4 for your device variant (s3ve3gUB)
http://samsung-updates.com/device/?id=GT-I9300I
It is : I9300IUBUBNJ1 ,so try flashing that one
Click to expand...
Click to collapse
Do you mean.... this one???
http://www.sammobile.com/firmwares/download/37860/I9300IUBUBNJ1_I9300IUUBBNJ1_TTT.zip/
I try few times to flash I9300IUBUBNJ1 thru Odin .... OTA ... KIES .... no success ..... I have a weird phone ....
thanks for a tips
And yes ,,,,,,,my phone is UB variant .... maybe Samsung is not released firmware for my phone .....
I just look under hub
MODEL: GT-I9300I UD
SSN: I9300IGSMH
FCC: A3LGTI9300I
Still no luck with update to 4.4 ... ......
moro89 said:
The best solution for you is to initialize your phone using Kies 3... However, this requires a running phone, not a bootlooping one... Use a firmware that works with you first!
Install it, connect your phone and do the initialization from the firmware menu... This should install the latest available firmware to your device while cleaning up the whole mess....
Good luck
Click to expand...
Click to collapse
i cant install a firmware because , look at the photo , i tried 3 different Firmwares help !!!!!
nattila said:
I just look under hub
MODEL: GT-I9300I UD
SSN: I9300IGSMH
FCC: A3LGTI9300I
Click to expand...
Click to collapse
I am working on the same exact phone and I have having a hard time finding the right firmware for this phone.
It is stuck on recovery. I get a could not do normal boot and back to recovery. So I was planning on flashing a stock rom to get it out of recovery. Every how to page talks about going into setting to find your firmware version. This makes it hard when you cannot get into phone settings.
If you ever find the right Rom for this type of phone Please reply. Every rom site I have visited does not have the correct one.
This is most probably a hardware issue. Something on the main board got fried or some other glitch took place in a hardware component. Send it to Samsung for a repair or better buy a new phone.
---------- Post added at 12:25 PM ---------- Previous post was at 12:23 PM ----------
Another idea is to use Smart Switch. You don't need a running phone this time. Just choose the firmware initialization option and enter your device model and serial number, and you're good to go. If this didn't work, send it to Samsung or give it a goodbye kiss.
Good morning, my friends!
I have a little problem while I tried to update my note 4 910c turkey version via Odin.
I flashed the original 5.1.1 rom. Everything looked ok, but when the phone rebooted nothing happened. That's not at my first smartphone with android so I really have a pretty ideea how to flash something via Odin.
Also I tried a few weeks ago to flash another original ROM and the same thing happened.
Can you give me some ideas about that?
Thanks a lot for your attention!
Cheers!
adinel.berehorschi said:
Good morning, my friends!
I have a little problem while I tried to update my note 4 910c turkey version via Odin.
I flashed the original 5.1.1 rom. Everything looked ok, but when the phone rebooted nothing happened. That's not at my first smartphone with android so I really have a pretty ideea how to flash something via Odin.
Also I tried a few weeks ago to flash another original ROM and the same thing happened.
Can you give me some ideas about that?
Thanks a lot for your attention!
Cheers!
Click to expand...
Click to collapse
May be to wipe first data,system,cache on 5.0.1 stock and then flash 5.1.1?
Try to download again ROM from samm,or from mega(u have links here on xda)
adinel.berehorschi said:
Good morning, my friends!
I have a little problem while I tried to update my note 4 910c turkey version via Odin.
I flashed the original 5.1.1 rom. Everything looked ok, but when the phone rebooted nothing happened. That's not at my first smartphone with android so I really have a pretty ideea how to flash something via Odin.
Also I tried a few weeks ago to flash another original ROM and the same thing happened.
Can you give me some ideas about that?
Thanks a lot for your attention!
Cheers!
Click to expand...
Click to collapse
Did you follow the instruction givin in the sammobile website?
Did you unzip the file?
check AP then add on it
if so maybe you should re download the rom.
i did the update over the 5.0.1 no issues .... then i decided to wipe and flash clean and that was super good
what do you mean by nothing happened? it still 5.0.1 firmware ??
I posted yesterday about rooting and everything worked fine courtesy to you wonderful people but my touchscreen is messed up and I need to get in contact with the seller on ebay to get it replaced.
I need to get it back to stock firmware with all the bloat as I pretty much deleted it all thinking my phone would work fine. I don't want any hiccups with the seller saying it was my fault blah blah..
I'm downloading the stock firmware from SamMobile for my device currently, but need a (n00b-friendly) guide so it goes smoothly with no troubles.
Thanks
Samsung Galaxy S5 (SM-900F)
Android version - 5.0
Baseband version - G900FXXU1BOJ1
UPDATE 1: I managed to flash stock rom and it is exactly how I received it.
The best guide I found - http://androidmtk.com/flash-samsung-stock-rom-using-odin
Now to get an actual working S5... sigh...
garen_93 said:
I posted yesterday about rooting and everything worked fine courtesy to you wonderful people but my touchscreen is messed up and I need to get in contact with the seller on ebay to get it replaced.
I need to get it back to stock firmware with all the bloat as I pretty much deleted it all thinking my phone would work fine. I don't want any hiccups with the seller saying it was my fault blah blah..
I'm downloading the stock firmware from SamMobile for my device currently, but need a (n00b-friendly) guide so it goes smoothly with no troubles.
Thanks
Samsung Galaxy S5 (SM-900F)
Android version - 5.0
Baseband version - G900FXXU1BOJ1
UPDATE 1: I managed to flash stock rom and it is exactly how I received it.
The best guide I found - http://androidmtk.com/flash-samsung-stock-rom-using-odin
Now to get an actual working S5... sigh...
Click to expand...
Click to collapse
It's pretty easy , here is the steps to follow :
1. Download the firmware.
2. Download and install samsung drivers.
3. Download Odin 3.10.7.
4. Extract the rom , you will get a 2.5 gb .tar file.
5. Boot your phone in download mode and plug it to your PC.
6. You should get a blue box in odin , click on AP , choose the .tar file , click on start , wait.
7. Done
Sent from my SM-T116 using XDA Free mobile app
Hi community I just need help to figure out what to do with my Tab 4 7.0 the history begins this way:
I get this Tablet already used not brand new it looked to have Android Lollipop 5.1.1 when I got it and didn't appear suspicious and lend it to one of my kids, the problem begins after some time the Tablet didn't connect to the Play Store anymore proly because my kids was trying to root it via KingoRoot or other apps to mess with some games, so after that I decided to solve the problem doing a Hard Reset but it didn't work, the tablet still can't connect to the PlayStore via RH-01 error message.
So I decided to flash it with the official stockl rom from Samsung, my BIG surprise is that this Tablet never get Lollipop 5.1.1 it didn't ever get Lollipop at all accordingly to this thread: https://forum.xda-developers.com/tab-4/general/links-galaxy-tab-4-official-lollipop-5-t3102844
Because my tablet is the SM-T230NU (the model accordingly to the box is SM-T230NYKAXAR) model and that model never gets LL, so I figure it out this was a modified rom? Even in the Info about the device over settings it says the model of the device i "Nexus 5" instead of Tab 4 or whatever Samsung call this device but not Nexus 5 that is a phone from LG.
So I stopped here, because I've heard it can be dangerous to Downgrade Android versions? If not what should I do? Use Odin3 and flash the rom mentioned in this thread: https://forum.xda-developers.com/tab-4/general/links-stock-galaxy-tab-4-firmware-t3013128
For the T230NU USA variant? Hope u can advice me about what to do and give some tips because this will be my first flash on a device.
Thanks in advance! :laugh::good:
They probably flashed a custom rom with broken GAPPS, just restore with Odin and the official rom.
Pix12 said:
They probably flashed a custom rom with broken GAPPS, just restore with Odin and the official rom.
Click to expand...
Click to collapse
By restore u mean flash it with some of the roms provided in this link: https://forum.xda-developers.com/tab...mware-t3013128
So there's no problem if I have 5.1.1 right now and get down to 4.2 as is the official one?