Can I flash DXUAME2 Modem over XXUFNC4 in order to use RegionLock Away?
Related
i need to instoll this modem
from here
http://forum.xda-developers.com/showthread.php?t=2349774
FIRST!!!
IS RECOMENDED FLASH BY ODIN MODEM XXUBMG9 FOR NOT LOOSE IMEI AND DATA CONNECTIONS
IF YOU HAVE INSTALLED MODEM MG9, NOT NEED FLASH AGAIN
Download MODEM XXUBMG9 here: http://depositfiles.org/files/1gkdh52gm
how do i do it?
form the recavry? or from the odin?
thx!
Hello,
i have omega v14 rom with old bootloader, gsm modem mj5 and lte modem mh1,
all is working except some time with wifi connected i can't navigate until i restart phone so
i decided to write stock firmware mj7 and keep knox for eventual phone loose.
Will i avoid warranty with stock mj7 and chainfire root?
Can i flash twrp recovery flash "mj5 3way reboot" on mj7 stock rom?
Don't know Rwiloc12's stock rom here contain stock NAE modem and NAE bootloader etc in?? http://rwilco12.com/downloads.php?d...axy S4 (SPH-L720)/Stock ROMs/NAE/Original TAR
A s4 device downgrade to MDC modem for SIM unlock. After flash back to NAE modem the WIFI still can not turn on. Device originally with NAE rom, NAE Modem and Bootloader, so it could corrupt the NAE bootloader or baseband with MDC modem installed. For some people flash back to NAE and WIFI work fine, and another still can not turn WIFI on. (My previous device work.)
Now, the only method I know to restock everything back to stock.. Don't know the above link from Rwilco12 could help.. Please advice.. thanks in Adv.
Here is what you need
http://www.sammobile.com/firmwares/3/?download=25944
I just bought a new galaxy s4 I9505,(UAE),I rooted using CF auto root,SU is installed but custom recovery is not installed
After rooting device restarts randomly sometimes,and Touchwiz interface bars turns violet (like rendering problems) when I scroll,I want to flash lollipop roms,(samsung),
MY MODEM BOOTLOADER DETAILS -
AP : I9505XXUGNH8
CP : I9505XXUGNH8
CSC ; I9505JVFNG1
Do i have to update bootloader and modem to flash new roms? is it safe to flash TWRP through odin?
if Yes,tell me how to flash modem bootloader using odin.
Flashing a modem and bootloader is not necessary. Unless you have signal issues.
TWRP can be flashed with Odin. For me it didn't work, so I had to flash TWRP another way. Good luck
Uncheck auto-reboot before flashing the recovery in Odin and it will work.
And after twrp flashing, i can Flash my desired roms?
Maheshzx said:
And after twrp flashing, i can Flash my desired roms?
Click to expand...
Click to collapse
Yes. If you want CyanogenMod. Touchwiz roms can be flashed with Odin if that's what you're looking for.
Hey guys,
I installed xtrestolite on my G900F and changed the bootloader and modem of my device before installing it. First problem i had was with CSC. It is a single CSC and i couldn't install my countries CSC on it. That's why i went back to stock. I installed Kit Kat firmware that i downloaded from sammobile and then changed CSC to my countries CSC. Then i updated firmware to lollipop using Kies3. But installing stock rom didn't change bootloader version or modem version. Now i have kitkat bootloader version, kitkat baseband version and lollipop firmware version all different and i want to them all to be the same(latest lollipop). Is there any way to do this without downloading stock rom from sammobile again ? And if not, then can i just put the tar.md5 file that i will download from sammobile in bootloader, pda and CP at the same time and install with odin ?
Thanks in advance !
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Sean89us said:
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Click to expand...
Click to collapse
Hey thanks for the tip ! I just downloaded stock firmware but i don't know how to extract bootloader and modem from tar.md5 file and then make them odin flashable. I uploaded image with all the files that are in my tar.md5 file. What of these are for bootloader and what for modem and how do i make them odin flashable later ?
Thanks in advance