HI guys,ive managed to get my lg g2 D802 int edition into download mode,it was previously stuck in fastboot loop,
however,it says BO ROOTED at a screen below the progress bar,assuming i attempt to use the lg flash tool,will it install the stock rom.I have a mac so im to borrow a windows machine tomorrow to test this out,
is there anyone who can walk me through the steps to install the stock rom and what software i need,assuming i get a windows machine
Don't worry if it says so. Should go through fine
washingtonkates said:
HI guys,ive managed to get my lg g2 D802 int edition into download mode,it was previously stuck in fastboot loop,
however,it says BO ROOTED at a screen below the progress bar,assuming i attempt to use the lg flash tool,will it install the stock rom.I have a mac so im to borrow a windows machine tomorrow to test this out,
is there anyone who can walk me through the steps to install the stock rom and what software i need,assuming i get a windows machine
Click to expand...
Click to collapse
Don't worry. The Bx is just a flag representing the battery level. You will notice as your battery gets more charge, the Bx will go up aswell . You can find a back to stock guide using Download Mode HERE.
Related
Aw man I need some serious help here! So yesterday I was following instructions on the android forum to get my phone to 2.3.7 and so I downloaded this fastboot ROM and flashed it to my GT540 but I later found out you needed to have a rooted phone in order to get into fastboot and everything in the OS from android forum kept crashing my apps (couldn't get Z4Root), so I decided to try to flash it to 2.1 with the LG Update Tool and it got stuck at 4 percent. I unplugged it and now my phone was stuck at the Vodafone logo. I used KDZ Updater to flash FranceOrangeV20C_Fastboot to it and it didnt work (some parameter error showed up). Now my phone is stuck on the LG logo and it isn't detected by anything! PLLEASE HELP! I bricked my phone!!!!
this happened to me before dont know about you but i would send it to lg.
Figured it out!
OK so in KDZ Updater change the phone mode to CS Emergency and go into Download Mode in the phone and then just flash
This is if you get errorcode: WParam:100 LParam:4008
mine was in a worst condition the phone will not boot in anyway
As your phone turn on there is always a way to save it
Don't worry, we all been there
Follow instructions properly anz don't be smart are solutions to avoid bricking.......now i agree send it to lg if still under warranty.
Sent from my LG GT540 using xda premium
go into download mode
connect it to ur pc
go into device manager and turn off android modem
use kdz updater english version and change type to 3GQCT-Smartphone(WM)
chose ur rom and run
That's what i did when my phone stuck at LG logo and the only thing i could do is go into download mode ^^
Hope it help
Q&A for LG Flash Tool 2014 - The best way to Flash LG KDZ Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
d950
Im having issues with doing the OTA update for my Flex d950, says my phone is not registered. I am going to be upgrading from a rooted 4.2.2 to the 20b 4.4.2
If I do the CSE flash will I lose root? Has this also been confirmed to work on windows 8.1 ? i've been reading of people having issues. Or should I just do the normal flash instead of cse?
AJUDA
Galera to com um problema na hora de restaurar a rom do G2...sempre quando vai atualizar no lg flash tools para com 11% e no celular nao sai de 1% alguem me ajuda ai pq meu G2 só fica na tela de FIRMWARE UPDATE
THANK YOU!!!!!!!!
I could really not be happier right now!!!! THank you SOOO SOOO MUCH!!! Really appreciate it!
there are no pictures, pls update pictures or write down what to choose
LG Flash Tool 2014 this application does not works offline! It need internet connection otherwise works incorrect! Look below attached picture.
Stuck In Download Mode.
Phone: LG Optimus G Pro E988, Android 4.4.2
Updated the phone about 2 months ago with the tool, today I tried to flash the same KDZ file but forgot to copy it to the LG Flash Tool folder, now my phone is stuck in download mode(I tried a number of key combinations to boot it into recovery), I thought it was the LG Support Tool problem, tried to install it, but a window pops up saying I have to connect to the internet and try again, but I was already connected, Downloaded the latest version 1.0.7.1 of the tools, now installation stuck at just about 5 %(attached a snap shot), please help my phone is stuck in download mod.
freegame619 said:
Phone: LG Optimus G Pro E988, Android 4.4.2
Updated the phone about 2 months ago with the tool, today I tried to flash the same KDZ file but forgot to copy it to the LG Flash Tool folder, now my phone is stuck in download mode(I tried a number of key combinations to boot it into recovery), I thought it was the LG Support Tool problem, tried to install it, but a window pops up saying I have to connect to the internet and try again, but I was already connected, Downloaded the latest version 1.0.7.1 of the tools, now installation stuck at just about 5 %(attached a snap shot), please help my phone is stuck in download mod.
Click to expand...
Click to collapse
Yeah... This tool works incorrect. It brick my brand new LG G2 D802 32GB when I upgrade from V20B to V20G. The phone still is brick. I think unable to unbrick without send to LG repair service. I don't recommend use this application! I recommend use completely offline older method:
install on PC LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3, install on PC LGMobile Support Tool (B2CAppSetup), control panel>show hidden files,folders, from folder UpTestEX_BY_BRIDE_2014>Apps copy the LGMLauncher and past it into folder LGMOBILEAX (Local Disk C:>Program Data>LGMOBILEAX), from folder UpTestEX_BY_BRIDE_2014>Apps copy the LGUserCSTool.exe and past it into folder B2C_Client (Local Disk C:>Program Data>LGMOBILEAX>B2C_Client), if possible in the phone run the USB Debug, if possible in the phone choose method of connection into LG Software, connect phone into PC and wait a moment for install drivers, run as administrator application UpTestEX_BY_BRIDE_2014, select KDZ file, select type: CDMA, PhoneMode: DIAG, CSE web upgrade test, Upgrade Start, Diffrent Country, Language
This method is a 100% offline-not need internet connection.
Good luck!
LG G2 stuck in Boot Loop after flashing firmware
Hi Guys i have a LG G2 which had been rooted and was running CM11 CyanogenMod Android KitKat 4.4.2.
I wanted to go back to stock, so flashed the phone using the LG flash tool 2014 which worked fine till it rebooted to the LG logo and rebooted again and again till battery went flat.
I can enter download mode by holding vol+ and plugging in the usb but can't do anything please could someone advise.
Thanks
For all of you with D802 model who bricked your device using this tool (like I did) use this one (link under) step by step and everything will be fine. This ia .tot method and you'll be 4.2.2 again.You just have to be able to enter download mode to save your phone with this method. It saved mine. Good luck
http://forum.xda-developers.com/showthread.php?t=2687929
wow
Am I supposed to not change language?
I'm stuck on phone screen (download mode) at 13%
Hi,
i used towelroot and used a programm to change my locale setting. I set it to German language and Antarctica location by mistake instead of German and Austria, and that terminated the Android UI over and over again. The phone instantly went into a loop restarting its UI. A reboot did not work, stuck on LG logo. I can enter download mode, but not factory reset.
Used your modded tool. It goes to 99% and then end with "abnormal program termination". It looks like the flashing worked, but the language setting is the same i guess because the phone is still stuck at the LG logo. I am using the normal flash, not CSE flash cause i want to rescue my data.
I leave the default setting cdma and diag. I tried Germany, different country and germany, republic of korea, and even korean, republic of korea in the window before the update starts.
Is there a way to force the Antarctica locale setting to go away without deleting all my data?
Got LG G2 32 gig, unlocked
I am on Sling 2.2.2 on F180L.
I want to go to stock..
Should I have to relock boot loader 1st or KDZ flash will automatically lock BL?
Stock KDZ file is 1.2GB. I assume this Tool won give any error?
Sent from My LG Optimus G F180L Sling 2.2.2 stock 4.4.2 rooted
Hi ppl!
Need some help, in lg flash tool only appers the normal way for flash! Never appers the option to wipe the phone complete.
I'm using win 8.1 64x and already install the additional software that OP indicate.
Any tip to resolve this?
Thanks in advance
Send from D802 32gb OptimusG3 v1.4.1+Dominax Kernel v8.7
LG G2 stuck
I was installing a new kernel using clockwork Rom Manager to reboot the phone in TWRP recovery, didn't know this was bad. So I had my G2 completely stuck on LG logo, no download mode, no recovery, can't even turn it off, then I tried LG mobile support tool, restored after many times a Rom, but when it boot it asks me some kind of PIN/Password, then I did the same using LG Flash tool by goind in download mode, but still the same, what can i possibly do? Thanks in advance
If you have download mode,look at my post #10. There is a link to solve your problem. It definetly solved mine and I only had download mode. Just follow steps 1by1. Don't know which version you have,mine is D802. I think it helps for D800/1/2/3
has anyone used this tool on LG-F370S, South Korea?
help please
i have LG G2 D802 32gb ... heres the details...
i tried to flash twrp recovery which lead me to fastboot with no recovery no download mode no adb connection just fastboot...
after two days of reading threads after threads i flashed "pgpt32g.img" "rpm.img" "sbl1.img" "sgpt32g.img" and "tz.img" with fastboot.. after that i finally saw my device booted normally.. but dont know why the touch went crazy... like theres something wrong with the screen... i thought i messed it up or its some software issue... so i downloaded D80220F_00.kdz and flashed it on my phone... once again i am stuck.. now on LG logo... after that i downloaded ""Europe OPEN D80220B_00"" "TMO-EE 32GB D80210B_00" and "UK Open 16GB D80210B_00" and flashed them one by one ... i am still at my LG logo phone doesnt go further....
now... i found these websites here on xda
http://lg-firmware-rom.com/
http://csmg.lgmobile.com:9002/csmg/b...heck2.jsp?esn=
i searched the firmware with entering my imei and both sites are giving me same kdz now... i flashed this file too... nothing happened all i see is LG logo and led changing colors....ALSO TRIED HARD RESETTING THE PHONE STILL NO HOPE...
hope you guys reply soon
thanks..
Empty "Language" list
Hi,
I have LG F70 D315.
I got an issue when choosing language from the "Language" list (see fig. attached).
Please give me a prompt on how to fix this issue.
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Briked my lg g2 d802
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Acolis said:
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Click to expand...
Click to collapse
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Faddy132 said:
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Click to expand...
Click to collapse
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
MosesTheTool said:
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Click to expand...
Click to collapse
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Acolis said:
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Click to expand...
Click to collapse
No it doesn't, i have ADB, i know how to use it, i already saved one D800 that was in Fastboot.
Problem is, i used the debrick method, i succeeded, but now the device is recognized as LG but the screen stays black. It's acting a bit weird, it flashes with LG FLASH TOOL, although i believe it's not even in Download mode, but the screen keeps staying black.
Stuck at logo
janmynar said:
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
Click to expand...
Click to collapse
still stuck at logo flashing same version kdz twice and thrice result is same.. i think i jz RIP my phone.. I have lg g2 D802 international variant if you have any other solution to wake my phone so tell me bro.. its makes me so frustrated..
Hello XDA-Community
Today i accidently briked my G2 (D802 KitKat 4.4.2). I was flashing it because i wanted to unroot it but during the process an error showed up and my phone was dead.
So i tried to fix it with this method http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but it didn't worked as planned.
Now i have an G2 which is stuck in a bootloop and i can't even reach the recovery or the download mode and i don't have any custom recovery installed.
Anyone who can help me with this get's an 10€/$ PSC. I can't give more because i dont have any money left (16 years old).
Big thanks to everyone who can help me with this
PS: Sorry for my bad english i'm not a native speaker
While you wait for an answer make sure your phone is kept charged.
Have you tried LG flashtool and your stock ROM?
make sure it's off, hold the VOLUME UP button while plugging it into your computer, and that should get it into download mode.
Next try using the TOT method (google it) and voila!
Yeah the problem is that i can't even reach the download mode and my computer doesn't recognize my phone it's just an qshub device. ;(
I had the same issue bricking my lg g2 and i was stuck with the logo and nothing more not even download mode,recovery etc...
The way i got it to stock was i installed the lg g2 drivers and from there on just flashed it with flashtools kdz and got it workking again i think this shoould help you out just plug your phone and install the drivers and use flashtools
Install this driver then report me back or cap screen device manager to me.I will help you for fee.
https://www.dropbox.com/s/a69s06mkpzao01m/qhsusb_bulk_DRIVER_G2.zip?dl=0
Hi All
I have LG G2 D802T (written on back of Phone) 32GB version. I want to install Android 5.0.2 as i was not getting Lollipop update so i installed Lollipop from here.
http://www.naldotech.com/flash-android-5-0-lollipop-kdz-image-lg-g2-d802/
I have followed all the steps very carefully and installation was completed successfully. Now the problem is it is stuck on LG Bootlogo and when i try to go into download mode, it takes me to Fastboot mode.
Can someone guide me in detail on how to recover my phone, which rom to install and how with links to ROM and Software, Drivers.
Would be be greatly appreciated.
Anyone?
I will reply to in this forum in a couple hours. One question. Does the pc detect your phone in fastboot at all??
Keep trying to get the phone into download mode. It took me alot of tries but i eventually got it. Then see if you can connect it to the lg support tool and run the update and it should get you back to stock android. If not, see the lg g2 unbrickable thread. Let me know how you make out.
Dylan8190 said:
I will reply to in this forum in a couple hours. One question. Does the pc detect your phone in fastboot at all??
Click to expand...
Click to collapse
Thank you very much for your efforts. Yes PC detects my phone in fastboot mode and i can also send commands through fastboot. BUT i didn't check if the phone can process on those commands or not.
Dylan8190 said:
Keep trying to get the phone into download mode. It took me alot of tries but i eventually got it. Then see if you can connect it to the lg support tool and run the update and it should get you back to stock android. If not, see the lg g2 unbrickable thread. Let me know how you make out.
Click to expand...
Click to collapse
I have tried alot of times to go into download mode but it shows download mode and goes straight to fastboot mode. Can you provide me a step by step procedure that would be of much help.