Hello! i need to turn on my phone with a not working power button as fast as possible. do you guys know of a way to turn it on? Charging without battery doesn't work..
solution
1. pick off the battery
2. push down: volume up+volume down+home buttons at the same times
3. while holding down the buttons plug it on the charger, but dont let up the buttons
4. after you get into recovery menu, u can let up the buttons
5. put back the battery
6.a reboot system from the recovery (if you use custom recovery)
or
6.b if you use stock recovery and dont have reboot options, just wait until the phone reboots itself
7. :fingers-crossed: &
Related
Hey guys.. Yesterday i downloaded autorec and installed TWRP.. Today i wanted to install a custom rom.. so i read some posts and i thought that i should wipe Everything.. So i wiped even my internal storage where i had my rom .img.. then i searched on the internet and i read to shut down my phone and reboot to recovery mode.. When i did that my phone stuck in bootloop and when i try to power it down it turns itself back on.. I cant enter recovery and download mode.. PLEASE HELP FAST.. my phone is LG G2 D802
Past98 said:
Hey guys.. Yesterday i downloaded autorec and installed TWRP.. Today i wanted to install a custom rom.. so i read some posts and i thought that i should wipe Everything.. So i wiped even my internal storage where i had my rom .img.. then i searched on the internet and i read to shut down my phone and reboot to recovery mode.. When i did that my phone stuck in bootloop and when i try to power it down it turns itself back on.. I cant enter recovery and download mode.. PLEASE HELP FAST.. my phone is LG G2 D802
Click to expand...
Click to collapse
first of all - never, but never delete/wipe your internal storage...
second - and i've wrote this many times already:
to turn the device completely off
- your usb cable must be disconnected
- have the device charged for more than 50%
- press pwr button for more than 10 seconds
- at some point, LG logo will show - DO NOT LET THE PWR BUTTON OFF - KEEP IT PRESSED
- only then the device will be powered off completely with the black screen
THANK YOU!! you are awesome.. I misunderstood and i thought that i should wipe everything.. What do it do now?
Past98 said:
THANK YOU!! you are awesome.. I misunderstood and i thought that i should wipe everything.. What do it do now?
Click to expand...
Click to collapse
now you find the thread on how to transfer a rom to a device directly from twrp or adb... or how to flash KDZ stock (then reroot and go from scratch)
i've never done it because i've never messed up anything on my device (my luck) - so i don't know in details - but there are threads on this subjects...
btw one more thing i've noticed in your 1st post - you had an .img rom file
you can't flash .img in twrp - you'll need the rom .zip file...
how do i access TWRP?
search on which button combination to press to enter twrp... (but before you try the key combinations - have the device powered off completely as described above)
on my device and 20h bootloader its
- press and hold pwr button + volume down
- lg logo shows (let the buttons go for a second or less)
- quickly press and hold pwr button + volume up
that works on my device...
you probably have older bootloader (20a) so you can try
- press and hold pwr button + volume down
- lg logo shows (let the buttons go for a second or less)
- quickly press and hold pwr button + volume down again
now - if you have TWRP installed - it will show you a white screen (factory reset) with yes/or no buttons - just answer YES to all and it will boot to TWRP (you answer with volume up/down keys for selection and pwr button to confirm)
if nothing of that works - try searching for other key combos... but afaik those are the only two that exist - depending on bootloader...
I tried to update my LG G2 D802 from CM12.1 to 13 using the following steps:
1. reboot into twrp (2.8.7.3)
2. full wipe (all but internal storage)
3. installed bootstack-d802-CAF-signed.zip
4. installed CM13
5. reboot system
so far it worked fine, so I went back into recovery mode, installed the open_gapps-arm-6.0-stock-20151203.zip. After reboot, the phone keep throwing error messages "google service is closed" and keep repeating. I thought it may be an error in the gapps so I went into recovery again and tried to install another gapp version. I did a full-wipe again, but then I accidently did a system reboot. Now the phone is stuck after showing the LG logo and won't start properly. I try to go back into recovery mode:
1. turn off the phone
2. press power + volume down until the logo shows
3. release and repress the both button, which should bring me into recovery mode, but it didnt work. tried it numerous times, but always the same, if I release and press the both button after LG logo, the phone would just restart after few seconds...
can someone help me? Since the phone doesn't start, I can't install anything. Is there another way to get into recovery mode? Or can someone explain to me what I broke?
Don't press and release the volume down and power button at the lg logo. Just hold it until it goes into recovery.
If you can't get in, try to TOT back to stock. I would recommend you stick with rooted stock before you hard brick it(if you haven't done so already). Not only is cm buggy ass hell on the g2 but MM will be even more so since it's so new. Good luck.
stan54 said:
Don't press and release the volume down and power button at the lg logo. Just hold it until it goes into recovery.
Click to expand...
Click to collapse
I tried, it seems the phone will just keep restarting(logo keep disappering and reappering again)
stan54 said:
If you can't get in, try to TOT back to stock. I would recommend you stick with rooted stock before you hard brick it(if you haven't done so already). Not only is cm buggy ass hell on the g2 but MM will be even more so since it's so new. Good luck.
Click to expand...
Click to collapse
what is "TOT"? How do I do that when I can't start the phone and can't get into recovery mode?
Follow this guide to go back to stock:
http://forum.xda-developers.com/showthread.php?t=2432476
With CAF bootstack by Daniel Stuart is new buttons combination to boot into recovery:
1. turn off phone
2. Power + Volume down
3. when LG logo appears, release both buttons and press Volume up + Volume down
brrrrm said:
With CAF bootstack by Daniel Stuart is new buttons combination to boot into recovery:
1. turn off phone
2. Power + Volume down
3. when LG logo appears, release both buttons and press Volume up + Volume down
Click to expand...
Click to collapse
+1 to this method, i have been using this when I was not able to get into recovery easily. My issue is unrealted to yours though.
I had a similar issue trying to enter Recovery on my phone. I've tried a lot both methods, so I turned off the device, waited something like 5 minutes, then tried the vol up + vol down method and it worked. I don't know why, but that's not the first time I have to wait a bit longer to try the key combination in order to enter Recovery. Just in case you can't turn off you phone completly, hold power button till phone turns off, keep holding it, wait for the LG logo to show up, when the screen goes off, release the button. Good luck
brrrrm said:
With CAF bootstack by Daniel Stuart is new buttons combination to boot into recovery:
1. turn off phone
2. Power + Volume down
3. when LG logo appears, release both buttons and press Volume up + Volume down
Click to expand...
Click to collapse
thank you, you life saver
brrrrm said:
With CAF bootstack by Daniel Stuart is new buttons combination to boot into recovery:
1. turn off phone
2. Power + Volume down
3. when LG logo appears, release both buttons and press Volume up + Volume down
It's not working for me. I got excited for a minute since others had luck with it, but it was a no-go for me. I know this is an older thread but....
It seems like being rooted, having TWRP and CM13 and Flashify, between all those, something should freakin' work, besides goofy hardware button combos. :crying:
Click to expand...
Click to collapse
I tried flashing the bootloader from here.
Then it went crazy or something, and got stuck on the powered by android logo, however i was still able to boot into download mode the first time by holding power + volume down button
to simulate a battery pull then quickly holding the volume down + home + power again. Then I tried flashing TWRP immediately in an attempt to make it work because i have a flash drive to microUSB adapter that allows me to read flash drives from my phone ( so that I can flash the rom properly ). The last time I was in TWRP there was 0 things in my storage everything was wiped after I flashed TWRP the first time
Now im trying to go back into download mode but it just wont let me after the battery pull.
1.) After simulating the battery pull, I immediately let go when the screen is dark.
2.) I immediately attempt to go into download. It shows the powered by android for a second, then flickers then it's back to the powered by android again.
3.) I think my recovery and download is screwed. Or something is going on
=== EDIT ===
I managed to get into download mode and flash back my stock rom.
I think the phone must have read my Power & Volume Down & Home button as the battery pull because I let go of all buttons completely before doing it.
Steps to get out of bricked hell:
• Hold Power & Volume Down until the phone turns off
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Hi, after flashing Magisk and TWRP recovery.img then install with Odin everything gone well. But when I want to restart to go in TWRP to install ... bootloop, tryied to start download mode with bixby + volume down or BIXBY + POWER + VOL UP and hold vol UP but nothing work. It bootloops on the first screen of boot, any help please ?
Thanks you
Up ! No one have an idea, really ? :/
Odin dont recognize the phone while it bootlooping, using original cable on usb 2.0
Did you try this?
Here’s how to enter Safe Mode on a Galaxy S10 smartphone:
Shut down your Galaxy S10 smartphone
Hold the Power button key and release it when the SAMSUNG logo appears on the display
Right afterward, press and hold the Volume Down button
Hold the Volume Down button until the device boots up, and the Safe Mode text appears in the bottom left corner
n33 said:
Did you try this?
Here’s how to enter Safe Mode on a Galaxy S10 smartphone:
Shut down your Galaxy S10 smartphone
Hold the Power button key and release it when the SAMSUNG logo appears on the display
Right afterward, press and hold the Volume Down button
Hold the Volume Down button until the device boots up, and the Safe Mode text appears in the bottom left corner
Click to expand...
Click to collapse
Finally some help ! First : THANKS YOU ! I've been all around the web to find help ...
I just tryied this but, it just reboot ... again and again (I cant shut it down so tryied when it was rebooting) other tips ?
I have tryied Odin, ADB and Samsung 300K tool and none is detecting the phone
- Recovery mode (BIXBY + POWER + VOL UP then Hold VOL UP) : not working
- Download mode (BIXBY + POWER then plug usb) : not working
- Safe mode (Power then VOL DOWN on logo) : not working
- Power then VOL UP + VOL DOWN : not working
Phone still reboot again and again and cant shut down
Maybe you should drain the battery,and then try again. I have had the same problem as you. Dont give up its not dead
n33 said:
Maybe you should drain the battery,and then try again. I have had the same problem as you. Dont give up its not dead
Click to expand...
Click to collapse
And when the battery is empty what should I do ?
Put it in download mode. Hold bixby, volume up and power, plug in type c connector, and then usb to pc. You should be in download mode now
Player04 said:
Put it in download mode. Hold bixby, volume up and power, plug in type c connector, and then usb to pc. You should be in download mode now
Click to expand...
Click to collapse
When the battery will be empty u mean ?
After 100x reboots , I finally passed to get download mode idk how (just spammed buttons ...) and reinstalled stock rom, will never try again to install this twrp anymore
Is there fix to connect my phone to pc and recovery my data, i have boot loop, can get recovery with power and up and download mode with + - volume. How to make my pc detect my phone, i use stock rom
I was trying to install a custom rom. I had unlocked bootloader and twrp already set up then installed ultimate Q then installed Evolution X 4.0. everything went fine until i rebooted it. Now phone doesn't start if i hold the power button. only response if I hold "vol down + power" then the screen turns on. If i try to "vol up + power" it doesn't boot into twrp. Download mode doesn't work either (I cant get to it).
This video (youtub/watch?v=Rc1Lvihyp8c) shows the guy using some sort of usb attachment. Is there a software equvalent of that which i can use my pc to reset the phone?
Any way to get it to flash twrp again?
reydoxs said:
I was trying to install a custom rom. I had unlocked bootloader and twrp already set up then installed ultimate Q then installed Evolution X 4.0. everything went fine until i rebooted it. Now phone doesn't start if i hold the power button. only response if I hold "vol down + power" then the screen turns on. If i try to "vol up + power" it doesn't boot into twrp. Download mode doesn't work either (I cant get to it).
This video (youtub/watch?v=Rc1Lvihyp8c) shows the guy using some sort of usb attachment. Is there a software equvalent of that which i can use my pc to reset the phone?
Any way to get it to flash twrp again?
Click to expand...
Click to collapse
To go to download mode
Normal method
1. Turn off phone
2. Hold down both volume keys
3. Plug in computer
Bootlooping
1. Plug in to computer
2. Hold down both volume keys
For a difficult phone
1. Connect usb to computer but not to phone
2. Hold down all 3 keys
3. When it buzzes release power and quickly plug in usb to phone.
It might take a few times to get it right.
If it's REALLY BAD
1. Wait for the battery to completely run down and use normal method.