[Q] Cant add or edit APN after OTA lollipop update - G900F - Galaxy S 5 Q&A, Help & Troubleshooting

Hey guys, just recently my SO's S5 got updated to 5.0 Lollipop. After the update her mobile data was rather sluggish so I decided to re enter the APN settings. I reset the settings to default and tried to add the APN settings using the + symbol, upon pressing the symbol nothing happens; the usual screen to enter in details does not show up.. So essentially her phone has no MMS or Mobile Internet :/.
Am I missing anything here? Is there a way to manually add the settings still?
Any help would be greatly appreciated!

Most carriers have either a number you text or a place on their site you enter the mobile number, and they send you the DATA settings via text
Worst case, you have to call the carrier to get them to send it
The text usually automatically updates the settings, sometimes you need to interact to set them

*Detection* said:
Most carriers have either a number you text or a place on their site you enter the mobile number, and they send you the DATA settings via text
Worst case, you have to call the carrier to get them to send it
The text usually automatically updates the settings, sometimes you need to interact to set them
Click to expand...
Click to collapse
Thank you for your reply.
I have actually tried to use the send APN service provided by the carrier after troubleshooting but to no avail.
The phone gets the 'Configuration message' and I am able to install it... but it literally does not change anything. I go into the APN settings and the APN(s) are still blank and I am still unable to use the + sign to add an APN. Very frustrating..
I'm a bit weary of installing firmware manually on Samsungs due to the knox counter... I wonder if a custom ROM or another official firmware will rectify this issue?

Flashing a stock ROM through ODIN will not affect KNOX
KNOX is only tripped when you flash a non-Samsung ROM / Recovery
You will find stock roms on sammobile with flashing instructions and links to ODIN on the download page of the ROM

Thank you so much detection, I should be able to figure it out from here.
Ill try and flash a new FW tomorrow when I have my hands on the S5. Will post back with results.
Thanks mate.

Good luck

Which region is your phone from?. I have the same issue on my hong kong version after the lollipop update ?
Sent from my SM-G900F using XDA Free mobile app

charlesip said:
Which region is your phone from?. I have the same issue on my hong kong version after the lollipop update
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
I did a full wipe and the problem went away.

Related

GT-i9505 No mobile network/data after flashing custom ROM

Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Hi guys been searching all day when I can grab some free WiFi, basically I rooted my s4 gti9505 with auto root and then installed custom recovery, and flashed PAC rom. I'm unable to make calls or receive mobile data but can use WiFi. My settings say baseband unknown .. I'll attach a picture of my settings here in this thread. I have attempted to flash a modem/radio in Odin but this didn't seem to make any difference, the problem is I'm not sure if it was the right thing to do (didn't make a back up of my phone foolishly before flashing PAC rom)
I'd appreciate any help with this guys! My network is vodaphone UK if that makes any difference to any advice given...
Thanks in advance!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
samersh72 said:
flash MGA modem twice with odin (first time do not tick "auto-reboot", when it "pass" remove battery, insert it flash second time)
This things happend when people move from old baseband to new baseband
Click to expand...
Click to collapse
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
somepepe**** said:
hi thanks for your reply, i have just flashed the MGG modem trying to fix it myself but when i reboot myself manually it just hangs on the samsung boot logo for ten minutes..i will try your method with the MGA modem and hope it works
thanks
Click to expand...
Click to collapse
and reflash the custom rom after flashing the modem
samersh72 said:
and reflash the custom rom after flashing the modem
Click to expand...
Click to collapse
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
going out now for a while but thought id ask - do you think that installing official stock rom (perhaps from your s4 unrooting guide) would help flashed via odin? from searching i can see that some folk suggest that stock will reinstall everything i need...im hoping so, i really wouldnt mind going back to stock, anythings better than this
somepepe**** said:
will do this too, have just finished flashing MGA modem twice using your steps, will flash rom again..i wonder if i should wipe/factory wipe as i would when installing new rom...ill try it!
no luck -still no network. im running out of ideas
network - unknown
mobile network type - unknown
imei unknown
imei sv - unknown
Click to expand...
Click to collapse
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
samersh72 said:
did you put modem in "phone" in odin?
hmmm weird! i guess your imei is not corrupted, sometimes while flashing rom in cwm, efs partition is not detected, so flashing modem twice should work
you can try with an other modem, use new one (but im sure to flash it twice)
another option is trying to flash your stock firmware
Click to expand...
Click to collapse
yes put it in "phone" mode, thats the second or third one i have flashed now so im not sure it wont help but for sure ill try again!
are you able to determine that its not corrupted? would it state as such if it were? im going to flash a stock firmware as a last resort. lost after that haha
edit - installed cwm using sgs4 flasher and re-installed my custom rom and gapps, booted no probs and network now working - sorted!! thanks for your help i dont think i would have reflashed the rom without your advice to do so
So I'm practically in the same boat. I'm currently on P.A.C. man nightly 09/18 (Vodafone Germany branded device). I never had similar problems, but now I can't call (or be called) and I'm not able to use mobile data.
I nearly tried everything:
1) I checked the IMEI (saved it before switching over to custom roms), but an IMEI number is still there.
2) Went back to stock to see if it's a problem of P.A.C. man ROMS or not. On stock it didn't work either.
3) Went back to P.A.C. man ROM and flashed modem XXUBMF8 via Odin 3.04 (from this thread: http://forum.xda-developers.com/showthread.php?t=2192025)
4) Flashed the modem again after I flashed the ROM because it didn't work either.
So I'm completely lost now, I really don't know what to do next. I had mobile data for a couple of seconds every now and then, but nothing stable. And since the problem came up (yesterday evening) I can not make any calls at all.
Can someone help me?
Edit: The very strange thing is that I have full reception balks in the notification area (only in grey). But still, I guess this means that the device is somehow able to detect a signal but can not connect to it?
Edit2: I apparently have no Device-ID. May that be a problem?
So I took some screenshots to show you guys my problem a bit better. For some reason my mobile data now works (currently HSPA, but it's extremely slow). But I still can't make any calls (or get called too). =/
Edit: So to sum this up: the strangest thing about this problem is, that even when I go back to full stock I can't make calls. =/ What could be the problem? An IMEI number is present in the settings (althouh the 'IMEI SV' under 'About phone' --> 'Status' was one digit below the current one that I can see under those stats). The whole problem makes me believe that my provider can't sort my phone number to my device (I'm on Vodafone; but if that's really the case: why the hell does mobile data works sometimes?!). The other possibility: something with the modem/radio is broken. Could this be the problem? The thing is that I also tried to flash a custom modem, but the problem is still there...
I'm really concerned that my phone just became an expensive paperweight
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
somepepe**** said:
Slightly different than my problem in that I didn't even have any bars for reception..my problem was fixed by changing the custom recovery software (originally I used philz to flash PAC), But I flashed cwm and then used this to again flash PAC, and all was good..don't ask my why but it helped me so you might want to try this...
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your answer!
You also flashed a different modem didn't you? Did this help or was it only the custom recovery? I'm confused because I used CWM before and never had problems. But then this mess all came up...
Yes I flashed several modems, that didn't help..only using a different custom recovery to flash my custom Rom again helped..hope you get sorted!
Sent from my GT-I9505 using xda app-developers app
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Gotcher said:
So I tried to flash PAC with TWRP 2.6.0 (it worked before), but the problem is still there.
I'm really confused. I really don't know what I can do or try to fix this mess... Is there some USSD code or something to find out if my device is missing some ID codes or if the modem is messed up or something?
Edit:
Update: For some reason I now can receive calls/SMS but only when I'm on GPRS speed. Outgoing and ingoing calls are no problem then. When my device is on HSPA or HSPA+ speed however, the old problem of not being able to call or be called is back. On one hand it's good that I'm somehow able to make calls again on the other hand it gets stranger and stranger. I know that it's a bug on PAC man ROMs that you can't change the mobile data speed options (LTE/HSPA/GPRS etc.), but I think that this could be the problem (or at least a part of it)...
Click to expand...
Click to collapse
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
soyusado said:
Actually I can change the data in my phone between 3G and 2G (don't have LTE support here in my country)
Have you checked your APN? Think that might be a problem.
Also please post the steps you take before flashing PAC (ROM, kernel, recovery, etc)
Click to expand...
Click to collapse
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Install stock ROM
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Mate you should try installing Stock ROM that might help I think !
.::Alien::. said:
Mate you should try installing Stock ROM that might help I think !
Click to expand...
Click to collapse
I tried that already, but it didn't help. Same problem...
I factory resetted the phone, wiped cache and dalvik cache and then flashed my Vodafone branded stock ROM via Odin that I had on my device when I got it. Didn't help for some reason... But: should I also try to go back to stock ROM via KIES? I haven't tried this method until now...
Edit: About my flashing method: I went from the stock ROM to rooted (via CF Auto root with Odin). For PAC I then flashed TWRP 2.6.0 and then in recovery factory resetted the phone, wiped cache and dalvik and then installed PAC. After that I installed GApps. I used this method before and it worked without any problems...
Edit2: I found this thread, it appears to be the same/a similar problem with the S3: http://forum.xda-developers.com/showthread.php?t=1805709&page=6
Now is there something similar for the S4? I think I tried calling ##72786# on stock ROM and it didn't work...
Gotcher said:
Within Wireless & Networks --> Mobile Networks --> Network Mode? On PAC? It always crashes when I try to change something there. In the PAC bug post this seems to be a known bug, my mode is also set to GSM/WCDMA/LTE. But whenever I enter the settings to change this, only 'LTE' is chosen as option. I don't have LTE on my plan and I read somewhere else that Vodafone has major problems with it's LTE network here in Germany and that it may be better for customers without it to turn it off.
About APN: there is definitely something strange. I can enter the settings and I see three different APNs that were not created by me (they must be the standard carrier ones): they are called Vodafone DE (for Germany), 1und1 (pretty strange because the settings are the very same on this one, only the name is different) and Vodafone DE-MMS.
The strange thing now is that I can't change any value of the Vodafone DE APN... When I go into its settings, everything ia greyed out. This was the same on the stock ROM...
Now when I create a new APN with the correct provider settings (found via Google on the VF homepage), the phone still won't work. When I put the device aside for a few minutes, the Vodafone Deutschland DE APN is the selected APN again although I never went back to it...
Is there some option to take a deeper look into the modem stats to see what's the problem?
Click to expand...
Click to collapse
Delete the unused APNs.
Do you have mobile data?
Also I asume that you're running the latest vertigo's build, because with me GSM/WCDMA/LTE is always selected.
Sent from my GT-I9505 using Tapatalk 4
Sometimes I have mobile data, but only for very limited time; for the majority of time, I don't have mobile data and can not make calls.
I also tried to delete the unused APNs, but still no change =/
I tried to use a different Micro SIM in this device, but the same problem appears. No data, no phone although I have grey reception balks.
any update on this one?!

[Q] MIUI v.3 Data Problem

Hi, Just installed this ROM using the recommended kernel (percy_g2's CM#2). I've search for a bug related to data connections but seems It's only me. SIM card recognizes my provider and I can make/receive calls and sms, but using the data plan it's impossible, showing it's disconnected. Checked and unchecked the roaming option and still doesn't work. What are my options?
Reset apn settings to default or manually enter them - your provider can send you the settings
Phone settings
click more or wireless and network settings
Mobile networks
access point names
press menu button on phone
reset to default
Check the apn settings are present & correct for your provider or enter them manually
marcussmith2626 said:
Reset apn settings to default or manually enter them - your provider can send you the settings
Phone settings
click more or wireless and network settings
Mobile networks
access point names
press menu button on phone
reset to default
Check the apn settings are present & correct for your provider or enter them manually
Click to expand...
Click to collapse
Did it and didn't work. As far as I recall, in all other roms I have installed I never changed settings ain APNs, they were empty all the time. The phone automatically gets the connection to the carrier. It was all about enable or disable data.
I called my provider but they say the network itself should recognize you inmediatly.
I just flashed stock and it's working there but not in MIUI.
memop3 said:
Did it and didn't work. As far as I recall, in all other roms I have installed I never changed settings ain APNs, they were empty all the time. The phone automatically gets the connection to the carrier. It was all about enable or disable data.
I called my provider but they say the network itself should recognize you inmediatly.
I just flashed stock and it's working there but not in MIUI.
Click to expand...
Click to collapse
Iv always had my providers access point in my apn settings but may be different for others
The only other thing you can do is try a different stock rom firmware baseband
you can do this by flashing a different stock rom firmware via odin to what you are currently using
See dokys thread at top of dev section for a list of pre done flashable odin firmware or make your own with any latest firmware from sammobile.com using the splitter tool
marcussmith2626 said:
Iv always had my providers access point in my apn settings but may be different for others
The only other thing you can do is try a different stock rom firmware baseband
you can do this by flashing a different stock rom firmware via odin to what you are currently using
See dokys thread at top of dev section for a list of pre done flashable odin firmware or make your own with any latest firmware from sammobile.com using the splitter tool
Click to expand...
Click to collapse
Could flashing a different Percy kernel may work?

software unlock

I did the software unlock via the dial code & UMTS menu, I can make phone calls with a different carrier sim, but I cannot get the data to connect. I have been searching xda and google for months trying to get this to work. I have a Canadian Bell mobilty i337m. Stock rom (mdj) and its rooted. I have tried factory reset several times but it doesnt fix it. I also tried flashing back to stock with odin. Does anyone have any other ideas?
When I try a telus (or other provider) sim, it give me voice service only and in the about > status menu the mobile network state either says disconnected or connecting. I have the data toggle on also.
Those unlocks don't work that well with the Canadian variants. They're designed for the i337 not the i337m.
Have you made sure the apn is set up right for the carrier?
Maybe this will help
Code:
http://apn-settings.com/canada/apn-settings-bell-mobility/
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ve6ay said:
Those unlocks don't work that well with the Canadian variants. They're designed for the i337 not the i337m.
Click to expand...
Click to collapse
ksj0823 said:
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Not true. I successfully unlocked my first S4 I337M on Bell following this tutorial. I sold that one because I was able to make a profit once I unlocked and flashed the AWS mod to make it compatible with WIND and Mobilicity.
simplywinter said:
I did the software unlock via the dial code & UMTS menu, I can make phone calls with a different carrier sim, but I cannot get the data to connect. I have been searching xda and google for months trying to get this to work. I have a Canadian Bell mobilty i337m. Stock rom (mdj) and its rooted. I have tried factory reset several times but it doesnt fix it. I also tried flashing back to stock with odin. Does anyone have any other ideas?
When I try a telus (or other provider) sim, it give me voice service only and in the about > status menu the mobile network state either says disconnected or connecting. I have the data toggle on also.
Click to expand...
Click to collapse
Try reflashing the original 4.2.2 firmware from here and then immediately follow this tutorial before rooting (do not install any system updates!). Then you can root, install custom recovery, reset the flash count, etc.
All questions and help issues go in Q&A and Help section
Thread moved
Thanks
FNM
MrKhozam said:
Not true. I successfully unlocked my first S4 I337M on Bell following this tutorial. I sold that one because I was able to make a profit once I unlocked and flashed the AWS mod to make it compatible with WIND and Mobilicity.
Try reflashing the original 4.2.2 firmware from here and then immediately follow this tutorial before rooting (do not install any system updates!). Then you can root, install custom recovery, reset the flash count, etc.
Click to expand...
Click to collapse
You did exactly what I am in the process of doing. I will try what you suggested now. Thanks!
Also, ive manually inputed apns for telus and eastlink and neither seem to work. I can always make voice calls, but the data will not connect.
ksj0823 said:
I will say the reason that cause the problem is that this is an ATT phone with At stock ROM. So it doesn't have the APN setting for other carries. You should set that by yourself.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
oddly enough, when I put a telus sim in it and waited for a while (in hopes it would eventually connect to data) and the apn settings for telus were in the phone. I know I didnt put them there because the apn settings for koodo were also present along with a third apn that I cant remember.
For future reference, try not to double post. Just edit your current post.
simplywinter said:
oddly enough, when I put a telus sim in it and waited for a while (in hopes it would eventually connect to data) and the apn settings for telus were in the phone. I know I didnt put them there because the apn settings for koodo were also present along with a third apn that I cant remember.
Click to expand...
Click to collapse
It's actually not an odd thing to happen. Once an activated SIM is inserted and the phone is unlocked, the phone searches for the best APN settings from all compatible carrier bundles. Some phones do this more accurately than others. However, it may not do this well enough if a custom ROM is installed. I know this to be true because this happened with my older Galaxy S3 when I tried selling it to someone (it was a T-Mobile unlocked running CM 10.0 at the time). However, setting the APN manually (assuming all settings are correct and that nothing else is wrong with the phone) should resolve your issues.
If you're still having problems, I suggest doing these things:
1. Try going into your network operators and let the phone search for carriers nearby. Once the list shows up, tap on Telus and wait until that screen closes on its own.
2. If you can't get data going yet, try disabling it, re-enabling, and reboot.
3. If this still doesn't work, try going into the network mode screen and select GSM/LTE and reboot.
4. If it's still derping on you, then it must either be your SIM not connecting to Telus's data network, or your account has a data block. That's all I can really think of.
Good luck.
MrKhozam said:
For future reference, try not to double post. Just edit your current post.
It's actually not an odd thing to happen. Once an activated SIM is inserted and the phone is unlocked, the phone searches for the best APN settings from all compatible carrier bundles. Some phones do this more accurately than others. However, it may not do this well enough if a custom ROM is installed. I know this to be true because this happened with my older Galaxy S3 when I tried selling it to someone (it was a T-Mobile unlocked running CM 10.0 at the time). However, setting the APN manually (assuming all settings are correct and that nothing else is wrong with the phone) should resolve your issues.
If you're still having problems, I suggest doing these things:
1. Try going into your network operators and let the phone search for carriers nearby. Once the list shows up, tap on Telus and wait until that screen closes on its own.
2. If you can't get data going yet, try disabling it, re-enabling, and reboot.
3. If this still doesn't work, try going into the network mode screen and select GSM/LTE and reboot.
4. If it's still derping on you, then it must either be your SIM not connecting to Telus's data network, or your account has a data block. That's all I can really think of.
Good luck.
Click to expand...
Click to collapse
Ok, reflashed stock 4.2.2 (the first one) and manually entered TELUS apn settings from the telus website, got data to connect finally. As a note, there was a typo in the apn settings that it auto aquired for telus. Going to try a eastlink sim tomorrow and hopefully AWS is working.
Edit: all seems to work. thanks everyone!!

i9505 no signal connection or 3g/ 4g """"""SOLUTION FOUND TO ALL USERS!!!!!""""""

i9505 no signal connection or 3g/ 4g """"""SOLUTION FOUND TO ALL USERS!!!!!""""""
SOLUTION:
THIS IS FOR ALL WITH NO CONNECTION OR CONNECTION ISSUES, DUE TO UNLOCK OR NOT
before you begin, if your phone is not factory unlocked, you will lose your aftermarket unlock
donwload the rar file
extract content, install all
on the phone:
Type *#9090# Select option 2 (DM/DUN over HSIC)
and
Type *#7284# it will open a new menu or If *#7284# does nothing type
*#0808#
. In this new menu:
- Set USB to AP
- Set USB settings to DM+Modem+ADB
login to server for free... user : test pass: 123unlock
click advanced, read nvm to do backup, now select write, search for i9505 repair file, and proceed
after 3 min phone will reboot, you will not have network connection!
INSTALL your firmware from sammobile, let it finish... let the phone power on, and when reboot is complete, power off, enter recovery mode and format your phone to factory specs (down volume+home button+power on)
your done, enjoy!
https://mega.co.nz/#!PkY0TT7J!7IlNM8WQ6NJ0q-R8joT8hYTivll070-LHLq94wPoSWE
Your digging around has misled you. The GT-I9505 has 2100MHz support for 3g, as noted here, here, and here. It also has 2100MHz support for LTE. So something else is causing your issue. Are you certain your phone isn't in fact getting an LTE signal instead of 3G?
monteiro-ribas said:
So in my country all service providers work with 3g at 2100 frequency, why does my s4 doesn't connect to 3g?
Well... sadly after digging around i found out that the phone doesn't support 2100 frequency.
It's the official firmware for this country, was bought in this country but only gets 2g and 4g
any way to solve this mess? most of the data signal comes from 3g signal, if i'm inside of a building i only have gsm data :crying:
Click to expand...
Click to collapse
Dial *#1234# and tell me what appears
so.... I9505XXUGNJ8/
csc I9505YXXGNK1
i flashed a new firware from sammobile
so... as i search for 3g, only show vodafone, not the network that i need, the phone is locked to NOS. Also should show MEO 3g, and doesn't.
Strephon Alkhalikoi impossible to make that mistake, inside any building with another s4 i get 3g fine
Inside the buildings there is no 4g cover, i really need the 3g
Based upon the information you've provided, you're on the Baltic Black Edition firmware (CSC SEB). The firmware here though doesn't appear to be the problem. The problem is that you need to clear up some confusion here. You're saying you can't get LTE, are using unbranded firmware, yet your phone is locked to a carrier.
In an attempt to clear up things, please provide us with the missing information below, and confirm any already provided information is correct.
1. Model Number
Answer: GT-I9505, based upon the title of the thread.
2. Android Version, found by going to Settings > More > About device.
Answer: 4.4.2, based upon the firmware information.
3. Firmware Version (AP, CP, CSC), found by dialing *#1234# in the dialer or by installing and running Phone Info from the Play Store.
Answer: AP and CP I9505XXUGNJ8, CSC I9505YXXGNK1, which using the sammobile.com firmware checker links to the Baltic Black Edition firmware.
4. Service Provider
5. Country
6. Is the phone rooted? (Yes/No)
7. Is a custom ROM installed? (Yes/No, and the name of the ROM)
Answer: No, if you're able to pull up the firmware version via *#1234#.
You seem extremely knowledgable on this subject, would you mind if i picked your brain ???? Ive been having a similar problem:
http://forum.xda-developers.com/showthread.php?p=57996223
I think all the info you requested is there, hope a fresh pair of eyes will come up with something.
Update: currently on lollipop 5.0 cm_12_20150111_optimized_jflte with no improvement
Thx for any help
Sent from my GT-I9505 using XDA Free mobile app
facts:
1- phone has network lock
2- i have lte and gsm data
3- i canĀ“t get 3g data, calls or messages because the phone doesn't find 3g network (only vodafone but not Meo or Nos)
4- i flashed all available firmware for this country
by using *#1234#
AP: I9505XXUGNJ8
cp: I9505XXUGNJ8
csc I9505YXXGNK
1. Model Number
Answer: GT-I9505, based upon the title of the thread.
2. Android Version, found by going to Settings > More > About device.
Answer: 4.4.2, based upon the firmware information.
3. Firmware Version (AP, CP, CSC), found by dialing *#1234# in the dialer or by installing and running Phone Info from the Play Store.
Answer: AP and CP I9505XXUGNJ8, CSC I9505YXXGNK1, which using the sammobile.com firmware checker links to the Baltic Black Edition firmware.
4. Service Provider
NOS
5. Country
Portugal
6. Is the phone rooted? (Yes/No)
No
7. Is a custom ROM installed? (Yes/No, and the name of the ROM)
No
monteiro-ribas said:
facts:...........
Click to expand...
Click to collapse
NOS (formerly PT Multimedia, ZON Multimedia and ZON Optimus). You will have to flash the latest firmware for your locked device. Download, unzip and flash this firmware via ODIN: HERE.
thanks but as i said before, i've tried many stock firmware, including that... that was te first one because i also thought that was something related to simlock
i will send the phone to warranty, or try at least
@Joku1981: If I didn't have to work today I would have told him the same thing.
@monteiro-ribas: If you intend on having the phone swapped out, you might want to flash the correct firmware that Joku1981 provided the link to before sending the phone in. I do hope you let us know if you get your issue resolved and whether it actually was the phone or, alternatively, the service.
pzyfocker said:
You seem extremely knowledgable on this subject, would you mind if i picked your brain ???? Ive been having a similar problem:
http://forum.xda-developers.com/showthread.php?p=57996223
Click to expand...
Click to collapse
@pzyfocker: Post your information in this thread, rather than the Modem thread. It will be easier to follow.
Please post the following information:
1. Model number
2. Android Version, found by going to Settings > More > About device.
3. Firmware Version (AP, CP, CSC), found by dialing *#1234# in the dialer or by installing Phone Info from the Play Store and running it.
4. Service Provider
5. Country
6. Is the phone rooted? (Yes/No)
7. Is a custom ROM installed? (Yes/No, and the name of the ROM)
Can do
1. Model number: Samsung Galaxy S4 GT-I9505 lte
2. Android Version, found by going to Settings > More > About device: At this exact moment flashing google-play-edition-rom-samsung-galaxy-s4-i9500-i9505-i9505g-i9506-android-5-0-1-lollipop
3. Firmware Version (AP, CP, CSC), found by dialing *#1234# in the dialer or by installing Phone Info from the Play Store and running it: Just finished flashing I9505XXUGNG8_I9505YXXGNH2_BGL and the phone automounted multi csc to SEE
4. Service Provider: Telcel
5. Country: Mexico
6. Is the phone rooted? (Yes/No): YES
7. Is a custom ROM installed? (Yes/No, and the name of the ROM): google-play-edition-rom-samsung-galaxy-s4-i9500-i9505-i9505g-i9506-android-5-0-1-lollipop although stuck on boot LOL
My original post in modems:
Ok guys, my kingdom for a solution, please !!!
Here's the deal, I have a samsung galaxy S4 GT-I9505 bought in hong kong, worked flawlessly for over a year on Telcel Mexico network, took a trip overseas to France bought a sim put it in the phone, worked great !!!!, came home put in my original sim and since then my S4 has been unable to maintain a stable 3g connection, usually connects for a under a minute and reverts back to edge. I've tried many different things recommended on this and other forums:
1.- removing/replacing sim card
2.- removing/replacing battery for over 4 hrs
3.- tried different sim cards from different carriers with same result
4.- wipe and clean install with different firmwares
5.- installed cyanogenmod latest
6.- under network modes, tried selecting every combination of lte, 3g, 2g, automatic network registration and selecting my preferred network.
7.- tried flashing over 30 different modems
8.- flashed latest firmware from sammobile specific to my phone (I9505ZHUFNL1_I9505ZZHFNL1_TGY)
9.- took it to a "technician" and he managed to return my phone in the exact same condition with the exception that now the wifi didnt work (i managed to fix this on my own)
10.- installed advanced signal status from play store which gave acces to other goodies such as selecting radio band between automatic, europe and usa, tried everyone of them with no solution.
Tried to be as thorough as possible, hope someone out there has a solution. I thank you all for your time and experience. Happy Holidays !!!!! I hope I am posting in the correct area, i searched and found this is the place where my problem seems to be discussed
P.D. Since im flashing GPE right now the screenshots no longer reflect what im on but I do have a nandroid back up of this rom and I am about to restore it.
Hope I was thorough, thanks for any help
solution found, see OP 1
monteiro-ribas said:
solution found, see OP 1
Click to expand...
Click to collapse
Hi mate,
Thanks for sharing , where did you find this information , i would like to read more about it.
MAX 404 said:
Hi mate,
Thanks for sharing , where did you find this information , i would like to read more about it.
Click to expand...
Click to collapse
i strugled 5 days with my phone, i did know that the problem was the nvm, and i found a free way to flash it, sammobile forum user 123unlock, owner of the program
monteiro-ribas said:
i strugled 5 days with my phone, i did know that the problem was the nvm, and i found a free way to flash it, sammobile forum user 123unlock, owner of the program
Click to expand...
Click to collapse
Thanks mate !!
Confused
monteiro-ribas said:
So in my country all service providers work with 3g at 2100 frequency, why does my s4 doesn't connect to 3g?
Well... sadly after digging around i found out that the phone doesn't support 2100 frequency.
It's the official firmware for this country, was bought in this country but only gets 2g and 4g
any way to solve this mess? most of the data signal comes from 3g signal, if i'm inside of a building i only have gsm data :crying:
SOLUTION:
THIS IS FOR ALL WITH NO CONNECTION OR CONNECTION ISSUES, DUE TO UNLOCK OR NOT
before you begin, if your phone is not factory unlocked, you will lose your aftermarket unlock
donwload the rar file
extract content, install all
on the phone:
Type *#9090# Select option 2 (DM/DUN over HSIC)
and
Type *#7284# it will open a new menu or If *#7284# does nothing type
*#0808#
. In this new menu:
- Set USB to AP
- Set USB settings to DM+Modem+ADB
login to server for free... user : test pass: 123unlock
click advanced, read nvm to do backup, now select write, search for i9505 repair file, and proceed
after 3 min phone will reboot, you will not have network connection!
INSTALL your firmware from sammobile, let it finish... let the phone power on, and when reboot is complete, power off, enter recovery mode and format your phone to factory specs (down volume+home button+power on)
your done, enjoy!
https://mega.co.nz/#!Oso1QZBT!E8V3LnYUimOqHCTMIcI0WMbWD2TnFUAB3ViotX_B_6M
Click to expand...
Click to collapse
Hi, thx for this, need a little help, im on stock rom, used the dial pad, set ap to your specs, I open the program in the zip file and cant find an advanced button, and hence cant continue, do i need to root the phone with this app and then an advanced button will appear ????
Managed to download srs tool from another link, logged in to server and currently trying this out, will update once finished
So far so good
pzyfocker said:
Hi, thx for this, need a little help, im on stock rom, used the dial pad, set ap to your specs, I open the program in the zip file and cant find an advanced button, and hence cant continue, do i need to root the phone with this app and then an advanced button will appear ????
Managed to download srs tool from another link, logged in to server and currently trying this out, will update once finished
Click to expand...
Click to collapse
Downloaded SRS tool from another link which finally gave me access to Samsung Remote Unlock Client, followed the steps in the guide, used the file provided in this guide and everything seems to be working for now, gonna test for a couple of days and will update.
I have attached the files I successfully used. Great many thanks to the OP and to the 123unlock team, had this problem for over a month and fingers crossed this appears to have solved it. THANKS
it worked
Thank you all. This solved the no 3g problem on my i9505
Iammykhael said:
Thank you all. This solved the no 3g problem on my i9505
Click to expand...
Click to collapse
can you please tell me the procedure step by step . i am new to do this
attiqurrehman said:
can you please tell me the procedure step by step . i am new to do this
Click to expand...
Click to collapse
Hello, i need the steps to. the link is broken.
By

Problem with the apn setting

Recently unlocked my Samsung Galaxy s7 edge. I decided to transfer my sim from my iPhone to my Samsung. I can text and call but my mobile data is not working. I believe it has something to do with my apn settings. But once I try to go to my apn settings it says "Unable to view access point name. Access is restricted to current user profile.
Would love to have someone to help me fix this problem.
What carrier is your s7
Globe (from the Philippines) gotnit unlocked and moved to Canada and using a Canadian sim atm
Sounds like a common problem going back to the introduction of mm. Carries implemented it to stop users from getting free Hotspot usage without them having the feature on there plans.
http://forum.xda-developers.com/galaxy-s6/help/apn-settings-t3072391
Here's some info I found on it with a possible fix on one of the post. Also the sprint s7e forum has users talking about losing the ability to change apn after OTAs
Sorry my Internet is dreadfully slow and having a hard time browsing through this forum. So do I have to root my phone in order to make the modifications to get my 3g to work?
Still having problems but I'm getting somewhere..
The carrier I bought this phone from did some retarded modifications to this phone.
So most likely the problem is this "user profile" it might be fixed if I can change or delete it or whatever. But the problem is I can't find the place where you can change this user profile. It seems it's supposed to be in "about device" but there is nothing that could change the user profile. I think the previous carrier somehow modified it stupidly. Reformatting doesn't help BTW.
pandakn1ght said:
Recently unlocked my Samsung Galaxy s7 edge. I decided to transfer my sim from my iPhone to my Samsung. I can text and call but my mobile data is not working. I believe it has something to do with my apn settings. But once I try to go to my apn settings it says "Unable to view access point name. Access is restricted to current user profile.
Would love to have someone to help me fix this problem.
Click to expand...
Click to collapse
have you figured this out yet buddy?
pandakn1ght said:
Recently unlocked my Samsung Galaxy s7 edge. I decided to transfer my sim from my iPhone to my Samsung. I can text and call but my mobile data is not working. I believe it has something to do with my apn settings. But once I try to go to my apn settings it says "Unable to view access point name. Access is restricted to current user profile.
Would love to have someone to help me fix this problem.
Click to expand...
Click to collapse
I have the same problem. Did you get this fixed?
Globe-locked S7 unlocked.
Same thing here. I just recently unlock my phone using the unlock code given to me by Globe telecom but when I use different sim network, I can only do call & text. I contacted Globe and the agent told me that unlocking is for call & text only and mobile data still locked to Globe.
Can we bypass this by reflashing openline firmware or wait for Oreo update?
hunkguy94 said:
Same thing here. I just recently unlock my phone using the unlock code given to me by Globe telecom but when I use different sim network, I can only do call & text. I contacted Globe and the agent told me that unlocking is for call & text only and mobile data still locked to Globe.
Can we bypass this by reflashing openline firmware or wait for Oreo update?
Click to expand...
Click to collapse
Did you manage this?
botski said:
Did you manage this?
Click to expand...
Click to collapse
After the Oreo update, I still have same issue. But before I upgraded to Oreo, I managed to fix the issue. I was trying to root my device (Nougat), unfortunately, it failed. So I downloaded openline firmware (PH version) for S7 in Sammobile and reflashed. I think I missed flashing CSC file but it was successful. The other sim network worked fine and can be used for data already. But when I checked for OS updates, it has no CSC code indicated, and my settings interface was like from UK (not sure). So I reflashed again with CSC file already and it got back to Globe interface and same issue occured. Haha. But the point is, we can fix the issue by changing CSC.
hunkguy94 said:
After the Oreo update, I still have same issue. But before I upgraded to Oreo, I managed to fix the issue. I was trying to root my device (Nougat), unfortunately, it failed. So I downloaded openline firmware (PH version) for S7 in Sammobile and reflashed. I think I missed flashing CSC file but it was successful. The other sim network worked fine and can be used for data already. But when I checked for OS updates, it has no CSC code indicated, and my settings interface was like from UK (not sure). So I reflashed again with CSC file already and it got back to Globe interface and same issue occured. Haha. But the point is, we can fix the issue by changing CSC.
Click to expand...
Click to collapse
Great mate! What csc can we use? Thanks!
CSC Codes
Google the list of CSC codes per country.
To change CSC code, enter *#272*Device IMEI#
Tried XTC (Philippines - Open Line) and it worked.
WARNING: This procedure will wipe the data of your phone. This may also void the warranty. Do this at your own risk.

Categories

Resources