Database Users

[Solve] the problem of installing the ROM program odin

Hello my friends, how are you all
I present to you a simple explanation to you suffers from spam in odin
For example:
Code:
complete write operation failed
Odin flash fail
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> system.img
<ID:0/025> NAND Write Start!!
<ID:0/025>
<ID:0/025> Complete(Write) operation failed.
<ID:0/025> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The simple solution is to follow the following steps:
1-The installation program Odin3 v3.07
2-Enter the download status And connect the phone to the computer
Then open the program Odin
3-We download the file PIT
4-And sail on this phone to correct some errors and keep in the PIT box in Odin
5-We work to Wipe factory
6-We install from four files
I9500XXUAMDE_I9500ODDAMDC_INU.zip
7-After we wipe factory And restart the phone.:good:
And here we have the explanation and I hope I succeeded the explanation Greetings everyone

Thank you friend, looks very useful!

tamirda said:
Thank you friend, looks very useful!
Click to expand...
Click to collapse
Thank you my friend tamirda
Sent from my GT-I9500 using xda app-developers app

Why are you messing around with the PIT file?
This is the easiest way to brick your phone if the pit file you use is corrupt or not for your phone. And I'm not talking about soft brick thats recoverable... You will have a brand new $600+ paperweight...
All you need to flash is the rom file (must be either .tar or .tar.md5) in PDA, make sure repartition isn't ticked and flash...
Also make sure KIES is NOT RUNNING...
If you have the new firmware, MH8, then this definately WON'T work...

I have the same problem but the solution does not work
I try to install this rum brought here and what I get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500ODDAMDC_I9500DDUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9500
S4
Anyone know what can be done
The device enters only state DOWNLOAD not RECOVERY

yony100200 said:
I try to install this rum brought here and what I get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500ODDAMDC_I9500DDUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9500
S4
Anyone know what can be done
The device enters only state DOWNLOAD not RECOVERY
Click to expand...
Click to collapse
simply go to http://www.sammobile.com/firmwares/2/
download your latest firmware and flash via odin
1. do no check RE-PARTITION option..leave it with auto-reboot and F.reset time (DEFAULT option)
2. flash only PDA file or single file downloaded from sammobile

My note 3 failed during odin firmware update to KitKat 4.4.2

Now I can’t install firmware or go into recovery mode but I can still get to download screen.

okizen said:
Now I can’t install firmware or go into recovery mode but I can still get to download screen.
Click to expand...
Click to collapse
Cant you go to the download screen and set ODIN away again?
Thats how I did it.

trubster said:
Cant you go to the download screen and set ODIN away again?
Thats how I did it.
Click to expand...
Click to collapse
Hi trubster, I've reset odin and my phone into download mode several times. The odin update process starts off ok but always fails when it reaches 'SYSTEM'.

okizen said:
Hi trubster, I've reset odin and my phone into download mode several times. The odin update process starts off ok but always fails when it reaches 'SYSTEM'.
Click to expand...
Click to collapse
What message is ODIN giving in the white text box?
have you tried re-downloading the ROM? I used the MEGA link and it worked fine.
N9005XXUENA6_N9005OXXENA5_XEO.zip is the one you need if it is for the N9005, you need the stock 4.4.2 FW before you can put CFW on

trubster said:
What message is ODIN giving in the white text box?
have you tried re-downloading the ROM? I used the MEGA link and it worked fine.
N9005XXUENA6_N9005OXXENA5_XEO.zip is the one you need if it is for the N9005, you need the stock 4.4.2 FW before you can put CFW on
Click to expand...
Click to collapse
These are the messages I get from odin (from the beginning).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
I should also mention that I has tripped my Knox to 0x1as I've always got on without one but I doubt if that would be the cause.

That file seems to be different, are you using a N9005?
https://mega.co.nz/#!jZYkyY5a!HfiJlXRgp_ZGWoQncFNWeEn5FnY_0i9iFb23EGfg2Nk
Thats the file I used first, put it in the PDA or AP box on odin and click start.
Should have no problems with it as it is an "Official" Sammy Rom

If you have a Hong Kong note you need to have a read around, If not, grab XEO firmware flash via odin 1.85 or 3.07

trubster said:
That file seems to be different, are you using a N9005?
https://mega.co.nz/#!jZYkyY5a!HfiJlXRgp_ZGWoQncFNWeEn5FnY_0i9iFb23EGfg2Nk
Thats the file I used first, put it in the PDA or AP box on odin and click start.
Should have no problems with it as it is an "Official" Sammy Rom
Click to expand...
Click to collapse
Sorry trubster, I missed out a part of the message in odin.
This is the FULL message in it's entirety.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
I've also tried the firmware from your link but unfortunately the results were the same.

I didn't experience this on my N9005 while updating, but I experienced this before on my S3, it was due to corrupted firmware file.

Please help me!!! Please!!!
okizen said:
sorry trubster, i missed out a part of the message in odin.
This is the full message in it's entirety.
<osm> enter cs for md5..
<osm> check md5.. Do not unplug the cable..
<osm> please wait..
<osm> n9005xxuena6_n9005oxxena5_n9005xxuena2_home.tar.md5 is valid.
<osm> checking md5 finished sucessfully..
<osm> leave cs..
<id:0/003> added!!
<id:0/003> odin v.3 engine (id:3)..
<id:0/003> file analysis..
<id:0/003> setupconnection..
<id:0/003> initialzation..
<id:0/003> get pit for mapping..
<id:0/003> firmware update start..
<id:0/003> aboot.mbn
<id:0/003> nand write start!!
<id:0/003> sbl1.mbn
<id:0/003> rpm.mbn
<id:0/003> tz.mbn
<id:0/003> sdi.mbn
<id:0/003> non-hlos.bin
<id:0/003> boot.img
<id:0/003> recovery.img
<id:0/003> system.img.ext4
<id:0/003> complete(write) operation failed.
<osm> all threads completed. (succeed 0 / failed 1)
<id:0/003> removed!!
<id:0/003> added!!
<id:0/003> removed!!
I've also tried the firmware from your link but unfortunately the results were the same.
Click to expand...
Click to collapse
i am also having this problem
it seems i cant flash other firmware other than poland fw...
I want ro revert back to ksa firmware or anygood fw since poland svoice isnt working fine<< sorry for bag english
please help me
i have flash my fw with kk italy, and spain but to luck,,, still having the same result... Failed!!!
Please please

u have to download hungry firmwar from sammobiles.com..it will b ok.and tick update boot loader must

clowrid1128 said:
i am also having this problem
it seems i cant flash other firmware other than poland fw...
Click to expand...
Click to collapse
I had the same problem... Just try to flash with this version of ODIN:
https://mega.co.nz/#!RVVXSYiY!6lynzTh-II8o8rvfYkdZzrYa_7m2F-CKgtItMZA66v4

I had the same problem today.The solution is here http://www.cultofandroid.com/53963/save-galaxy-note-3-failed-kitkat-update-odin-tip/
Now i am with german kit kat (DBT) and everything is ok !!!!!! :good::good::good:

Help me (SAM SM-N900S)
<ID:0/023> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900SKSU0GPI1_CL9178490_QB10835717_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900SKSU0GPI1_CL9178490_QB10835717_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_SKT_N900SSKT0GPI1_CL9178490_QB10835717_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900SKSU0GPI1_CL9178490_QB10835717_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/023> Removed!!
<ID:0/028> Added!!
<ID:0/028> Odin engine v(ID:3.1005)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Set PIT file..
<ID:0/028> DO NOT TURN OFF TARGET!!
<ID:0/028> FAIL!
<ID:0/028>
<ID:0/028> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/028> Removed!!
<ID:0/028> Added!!
<ID:0/028> Odin engine v(ID:3.1005)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Set PIT file..
<ID:0/028> DO NOT TURN OFF TARGET!!
<ID:0/028> FAIL!
<ID:0/028>
<ID:0/028> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/028> Removed!!
:crying:

Why are you flashing Kitkat ??
What phone have you got and what have you done before .
PIT showing as no partition fail .

How to fix this error log ?

<ID:0/025> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.12.8-i9500.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Set PIT file..
<ID:0/025> DO NOT TURN OFF TARGET!!
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> SingleDownload.
<ID:0/025> recovery.img
<ID:0/025> NAND Write Start!!
<ID:0/025>
<ID:0/025> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/025> Removed!!

I assume the phone is a gt-i9500.
I recommend trying TWRP as I think TWRP is more compatible with custom ROMs.

Can You Give ME GT-I9500 Latest TWRP Recovery Download Link Please ?

I asked about wether the phone is an i9500 because I see that model number in the tar file name.
Twrp for the various devices can be found here: https://twrp.me/Devices/
I believe the i9505 is the international version of the snapdragon 600.

Samsung Galaxy S4 failed with flashing stock firmware 5.0.1

Please help, i tryed to flash on Samsung Galaxy S4 I9505 5.0.1 android and I
received this message;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505OXXHOJ1_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded this firmware from Sammobile

Luka765 said:
Please help, i tryed to flash on Samsung Galaxy S4 I9505 5.0.1 android and I
received this message;
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOJ2_I9505OXXHOJ1_I9505XXUHOJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded this firmware from Sammobile
Click to expand...
Click to collapse
From what I heard, aboot.mbn errors are caused by the attempt to flash an older bootloader (downgrade).
Flashing older firmwares than the one currently on your phone will result in a fail.

Reply
GDReaper said:
From what I heard, aboot.mbn errors are caused by the attempt to flash an older bootloader (downgrade).
Flashing older firmwares than the one currently on your phone will result in a fail.
Click to expand...
Click to collapse
How to solve this ?

Luka765 said:
How to solve this ?
Click to expand...
Click to collapse
Obviously flash the same or newer firmware.

Another way?

Boot into download mode and confirm the phone's model #.
ROMs for the i9505 are here: http://www.sammobile.com/firmwares/database/GT-I9505/

How? Where can confirm when you get into Download Mode , my country is Serbia I'm here and downloaded firmware , and what we are now talking about here ?
Sorry for bad English

Give us all the info displayed in download mode.

Failed with Odin

hello guys, sorry, i'm new here.. i've just faced the problem with my phone.. idk why my phone was stuck, i've tried to remove the battery and tried to restart, it seemed the same, just stuck on samsung logo. i tried to enter to recovery mode, it failed. i've tried to install the original stockrom and it's failed..
here the problem and condition:
1. stuck on samsung logo
2. can't enter recovery mode
3. only download mode can be use
i've tried the stockrom but in odin said...:
<ID:0/021> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/021> Odin engine v(ID:3.1101)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Initialzation..
<ID:0/021> Get PIT for mapping..
<ID:0/021> Firmware update start..
<ID:0/021> SingleDownload.
<ID:0/021> spl.img
<ID:0/021> NAND Write Start!!
<ID:0/021> sboot.bin
<ID:0/021> sboot2.bin
<ID:0/021> param.lfs
<ID:0/021> boot.img
<ID:0/021> recovery.img
<ID:0/021> system.img
<ID:0/021> cache.img
<ID:0/021> hidden.img
<ID:0/021> SPRDCP.img
<ID:0/021> FAIL!
<ID:0/021>
<ID:0/021> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what should I do?
need help, please.. thanks

due to the change in the stock rom that contains lzm comression so the ordinary odin wont flash it
so use patched last version ( patched make sure)
and happy flashing same happen to me and solved by this
good luck