Database Users

help bootloop!!!

after three weeks everything ok,to day not start remains in bootloop.i have flashed the original firmware with odin LA3.ATO but is the same!!!.the firmware was the original with root and CWM.please help me!!!!

rimoragl said:
after three weeks everything ok,to day not start remains in bootloop.i have flashed the original firmware with odin LA3.ATO but is the same!!!.the firmware was the original with root and CWM.please help me!!!!
Click to expand...
Click to collapse
This thread is gonna get moved to Q&A, but, before it does...
First, try to boot into recovery and wipe cache and dalvik cache. If that doesn't work, you're probably going to need to flash a stock firmware via Mobile ODIN or the PC version of ODIN.
See the stickied thread with official firmwares in this section, then search XDA for how to flash via ODIN (I highly recommend Mobile ODIN). That should do the trick.
Steve

i have make all wipe but not change.i have flashed with odin 1.85 the stock firmware but is the same!

tell us a bit more detail how u flash and what u flash via odin

i have flashed the firmware P6800XXLA3 CSC ATO.with odin 1.85.but remainig in bootloop

Assuming that your download mode is fine
Can you enter recovery mode? What recovery. Stock or CWM?
If yes.. Your cache and dalvik need to be clean up..
When flashing with odin, Dont check repartition or use pit files, you dont need it except you know what to do..

I advise you to flash your machine with the following firmware ..... (see photo)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks,but when i try to download the firmware the link dont work:bad gateway.there is another link.

i have the link and i have flashed the P6800ZSLA2 EGY with odin 1.85 but is the same remaining in bootloop.after i have make the full wipe.

please i am very preoccupied,the problem is in the boot.

Thread Moved To General​
This is a development section, its not for questions. Please post in the correct section, and refer to the read before posting sticky for guidelines​

Install cwm recovery and download custom ROM from this thread http://forum.xda-developers.com/showthread.php?t=1520888
Move your zip file to sdcard / external sd card, and install from recovery,.. Tell me what happen after you done..

I did but not change!!!I 'never happened!this is not a BRICK.What you can 'do?
thanks

Have you done the Samsung stock recovery 3e data wipe/factory reset
And then reflash your stock firmware.
CWM data wipe or format is not good enough.
you might have to remove external sd card if 3e recovery goes to 'manual mode'.

i did exactly,but is the always the same:bootloop!!!is possible there is a virus?is possible to flash a firmware with Odin,with Bootloader and Pit?

excusme but i dont undestended the 3e recovery how i install.

my rooted GT7.7 with CWM also experience similar problem.
It stuck in the "Samsung Galaxy Tab 7.7" screen for around 5 mins and go into animation then growing "SAMSUNG" logo for another 5 mins.
Then finally it boot up normally. 8'(

How to Unbrick Samsung Galaxy S4?

Hello
I'll cut to the chase already because I'm desperate, I bought a galaxy s4 yesterday and hated the rom that came with it, I decided to return the root and rom rom by google.
I followed this tutorial, my s4 is the GT-I9505 4G purchased at VIVO (and modified by vivo too)
I used this rom: https://mega.co.nz/#!Ug5H3ByL!Q6K1Ig41xsFAL5GS79SZVzR2rR8iNPSsR1CYodf7oog
I got here: http://forum.xda-developers.com/showthread.php?t=2348272
At 10:40 of the video you can see that soon changes the logo s4 to the boot animation, I waited 30 minutes and nothing happened here, his is in seconds.
I read that-2.6.0.0 TWRP Recovery Mode could have caused the bootloop
I switched to TWRP 2.6.0.0-a modified version (one that I found to download) the-TWRP 2.5.0.2
I did wipes straights and choked install, over 16 minutes and nothing happened.
not sure anymore if I'm with bootloop or not, I saw a video of him and the screen flashes and lights, my stays on, so leave more than 30 minutes even?I left a few hours while sleeping (or at least tried) and continued at the boot
I can not access the phone by pc, how will a new rom on it?I installed the drivers that were recommended
Help me guys :crying:
and sorry for the horrible english, I'm translating the messages!
EDIT:
When I mount the sd recovery mode by:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Usual story mate.
Download stock rom from Sammobile and flash using Odin.
Bit of advice..... Don't use TWRP, use latest CWM or Philz recovery instead
Sent from my GT-I9505 whilst taking a s**t

Obagleyfreer said:
Usual story mate.
Download stock rom from Sammobile and flash using Odin.
Bit of advice..... Don't use TWRP, use latest CWM or Philz recovery instead
Sent from my GT-I9505 whilst taking a s**t
Click to expand...
Click to collapse
can you give me the link to download the CWM version for my S4?

Kilowog01 said:
can you give me the link to download the CWM version for my S4?
Click to expand...
Click to collapse
Here you go mate.
I would personally install Philz CWM recovery though. you can find it in S4 Original Development forum.

Obagleyfreer said:
Usual story mate.
Download stock rom from Sammobile and flash using Odin.
Bit of advice..... Don't use TWRP, use latest CWM or Philz recovery instead
Sent from my GT-I9505 whilst taking a s**t
Click to expand...
Click to collapse
which version of odin you recommend I use?how do I put this recovery mode if the file is .img?

Kilowog01 said:
which version of odin you recommend I use?how do I put this recovery mode if the file is .img?
Click to expand...
Click to collapse
Hi,
Look HERE
ODIN 3.04 works well.

Flash Wrong rom to My galaxy S4 I337 (AT&T)

I Flash Wrong rom (I9505_Omega_v17) to my Galaxy S4 I337 .. the phone get Samsung logo then black screen .. the Custom Recovery was Gone .. but the phone can boot to Original Recovery mode & download mode.
Help PLZ

i believe you can just flash back to stock using odin and download mode (hold volume down when booting) search on google for the correct files to flash with odin for the att i337. as long as you can get into download mode there is still hope.

Captain_Anarchy said:
i believe you can just flash back to stock using odin and download mode (hold volume down when booting) search on google for the correct files to flash with odin for the att i337. as long as you can get into download mode there is still hope.
Click to expand...
Click to collapse
I tray this I337UCUAMDL_I337ATTAMDL_ATT & SGS-I337_16GB.PIT .. but it is failed .. i think because the latest stock firmware is MF3 .. and there isn't download file of it
what can I Do Now ??

emadpro said:
I tray this I337UCUAMDL_I337ATTAMDL_ATT & SGS-I337_16GB.PIT .. but it is failed .. i think because the latest stock firmware is MF3 .. and there isn't download file of it
what can I Do Now ??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2502003 the link in the thread has a mf3 tar file for you use to flash back to stock via odin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

undecided323 said:
http://forum.xda-developers.com/showthread.php?t=2502003 the link in the thread has a mf3 tar file for you use to flash back to stock via odin
Click to expand...
Click to collapse
It is Work .. Big Thankssssss :laugh::laugh::laugh::laugh:

undecided323 said:
http://forum.xda-developers.com/showthread.php?t=2502003 the link in the thread has a mf3 tar file for you use to flash back to stock via odin
Click to expand...
Click to collapse
Im stuck on MF3, I've rooted and cant update for sone reason. Can I reflash the stock rom or will that cause a soft brick? What files besides the .tar do I need?

Larosche said:
Im stuck on MF3, I've rooted and cant update for sone reason. Can I reflash the stock rom or will that cause a soft brick? What files besides the .tar do I need?
Click to expand...
Click to collapse
What are you trying to update to?
Sent from my SAMSUNG-SGH-I727

jd1639 said:
What are you trying to update to?
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Whenever I try to update using the system update it downloads the update and when it tries to install it bootloops my device which I unbrick using an odin file I found somewhere around here. I believe I may have uninstalled an important system file with titanium backup which is causing the softbrick or the root, either way will I be able to reflash the rom? Or is there another solution?

Larosche said:
Whenever I try to update using the system update it downloads the update and when it tries to install it bootloops my device which I unbrick using an odin file I found somewhere around here. I believe I may have uninstalled an important system file with titanium backup which is causing the softbrick or the root, either way will I be able to reflash the rom? Or is there another solution?
Click to expand...
Click to collapse
After you flash with Odin boot into the recovery and do a factory reset
Sent from my SAMSUNG-SGH-I727

jd1639 said:
After you flash with Odin boot into the recovery and do a factory reset
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
What files do I need for ODIN other than the tar file mentioned in this thread

Larosche said:
What files do I need for ODIN other than the tar file mentioned in this thread
Click to expand...
Click to collapse
You only need the tar
Sent from my SAMSUNG-SGH-I727

jd1639 said:
You only need the tar
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
So just open odin and flash the tar file right? I have the safestrap recovery for mf3 will it affect it? Thanks btw

Larosche said:
So just open odin and flash the tar file right? I have the safestrap recovery for mf3 will it affect it? Thanks btw
Click to expand...
Click to collapse
Yes it will affect it. It'll delete it. It will delete your device and return it to like new. But you should get some working device again
Sent from my SAMSUNG-SGH-I727

jd1639 said:
Yes it will affect it. It'll delete it. It will delete your device and return it to like new. But you should get some working device again
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Great. Thanks once again.

I put my phone in a bootloop.

Yesterday I tried rooting my Samsung Galaxy S7 Edge using Odin CF autoroot with no experience at all. I did something wrong. When it wouldn't work at first and kept giving an error and "FAIL!" message I tried checking for the correct firmware so I googled my model number and found the one for my phone and downloaded it. I'm not sure what I did but my phone is in a bootloop whenever I turn it on and I can't go to recover mode, only download mode. How do I reinstall the correct firmware?
Please help me fix this. Hopefully I won't have to go to a store for repair...

Well u simply
1) go to sammobile
2) find ur model
3) download the latest firmware
4) extract the firmware
5) put the phone in download mode
6) open odin
7) connect phone
8) upload the extracted files to odin into there respective places
9) flash
the phone will automatically reboot after flashing is complete
NOTE: just be sure to flash model specific firmware.

flash stock rom with odin or use samsung software to fully restore original firmware

Alecia1212 said:
Well u simply
1) go to sammobile
2) find ur model
3) download the latest firmware
4) extract the firmware
5) put the phone in download mode
6) open odin
7) connect phone
8) upload the extracted files to odin into there respective places
9) flash
the phone will automatically reboot after flashing is complete
NOTE: just be sure to flash model specific firmware.
Click to expand...
Click to collapse
If I find the correct firmware will it just overwrite or must I remove the current one? I honestly have no idea how this works.

I had this problem once, you need to flash them Individually, one checkbox at per flash. The way to root ur phone should be magisk manager or supersu. First off you need twrp which is 3.2.1.1 that auto root thing in Odin doesn't work. Some custom rooms already have options for root so if ur a beginner it's best u try them.
---------- Post added at 11:09 PM ---------- Previous post was at 11:02 PM ----------
https://dl.twrp.me/hero2lte/twrp-3.2.1-1-hero2lte.img.tar.html
Flash this as ap it's a custom recovery that everyone uses here. Then use the keys power home vol down to force restart ur phone. Then power home vol up the moment it restarts to reach recovery. wipe everything then Flash a custom rom from the forums. I understand ur frustration that the phone has no way to turn off at all

When I try to flash the twrp-3.2.1-1-hero2lte.img.tar.md5 file Odin stops responding.

Don't flash Md5.
Flash the .tar file.

pingufanpoy said:
Don't flash Md5.
Flash the .tar file.
Click to expand...
Click to collapse
The non md5 download only has a recovery.img file which won't go into AP.

u flash it as a tar file not as the img file, you cant use .img files in odin
do not extract the img just flash the tar.
Btw in Odin the autoreboot and freset time don't matter they don't do anything because if you still don't have an os or recovery it will still send u to dl mode.
once u flash twrp it will automatically boot into recovery no need to hold keys. Then wipe ur phone and install either batman rom (an s8 port with Bixby) or superman rom (stock s7 edge firmware) both have customized installers that allow u to choose addons features and root.
U install custom roms by going to install button then selecting the zip. Also 2 main kernels that most people use are tgp kernel and superstock kernel.

dude, you're so smart, dont know what you're doing and you flash something without any knowledge and preparation...
that situation is fully on you

https://prnt.sc/iyosdg
I can't flash this.
https://prnt.sc/iyot25
Or this.

recovery.img comes in a .zip and nothing else is in it. If I don't extract it how do I flash it?? The .zip doesn't show up as an option in AP.

Deksastara said:
recovery.img comes in a .zip and nothing else is in it. If I don't extract it how do I flash it?? The .zip doesn't show up as an option in AP.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Now Odin isn't detecting my phone in download mode. When it's in the bootloop Odin adds and removes it repeatedly.

Deksastara said:
Now Odin isn't detecting my phone in download mode. When it's in the bootloop Odin adds and removes it repeatedly.
Click to expand...
Click to collapse
if u flashed it with a green pass, u should be able to boot into custom recovery
power home and volume down for force restart
when phone shows s7 logo, power home vol up to reach recovery

It hasn't flashed. It stays on file analysis for hours.

It does that if your phone is disconnected and reconnected. Download the official Samsung USB drivers.
https://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download

http://prntscr.com/iz109e
I've installed the driver. How long should this take? It isn't saying disconnected.

Flashing a custom recovery should only take 10 seconds. Custom rom 10 minutes. What is the model of your phone check the back of ur phone.

pingufanpoy said:
Flashing a custom recovery should only take 10 seconds. Custom rom 10 minutes. What is the model of your phone check the back of ur phone.
Click to expand...
Click to collapse
G935P.
It stays on "File analysis." Does this mean I don't have the right driver? If so, how do I find it? I downloaded the one from the link you shared.

Use SM-G935V on ting mobile?

Have an old SM -G935V that I'm trying to use on ting mobile. Can anyone recommend a Rom that will work? VZW says device is unlocked but still has VZW app on it saying "sim card is not Verizon." Any help is greatly appreciated!

kckish said:
Have an old SM -G935V that I'm trying to use on ting mobile. Can anyone recommend a Rom that will work? VZW says device is unlocked but still has VZW app on it saying "sim card is not Verizon." Any help is greatly appreciated!
Click to expand...
Click to collapse
download the U firmware or Tmobile firmware for it

Thanks @jrkruse I downloaded and read through your EASY_ROOT_ROM post. Would following your EASY_ROOT_ROM steps be better or does that include more steps than I really need?
For the U or T-mobile firmware download, do you recommend a link? I found one on updato... takes forever for the free version. Thank You!

kckish said:
Thanks @jrkruse I downloaded and read through your EASY_ROOT_ROM post. Would following your EASY_ROOT_ROM steps be better or does that include more steps than I really need?
For the U or T-mobile firmware download, do you recommend a link? I found one on updato... takes forever for the free version. Thank You!
Click to expand...
Click to collapse
what version firmware are you on the bootloader version

I'm sorry. Don't follow. Are you asking for the versions on the U firmware I'm trying to download? Or what is currently on the phone?
Downloaded version:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

kckish said:
I'm sorry. Don't follow. Are you asking for the versions on the U firmware I'm trying to download? Or what is currently on the phone?
Downloaded version:
View attachment 5605133
Click to expand...
Click to collapse
thats what you need but you may have to extract the pit file located in the CSC_OYM_**** file and load it in the pit tab in odin and flash it with the above firmware
I asked what version you were on because if your on B/11 bootloader you cant use anything in my EASY_ROOT_ROM post

jrkruse said:
thats what you need but you may have to extract the pit file located in the CSC_OYM_**** file and load it in the pit tab in odin and flash it with the above firmware
I asked what version you were on because if your on B/11 bootloader you cant use anything in my EASY_ROOT_ROM post
Click to expand...
Click to collapse
Thanks for your help on this. Yes, the phone is currently on the B/11 bootloader.
I selected the appropriate BL, AP, CP, CSC (tried both HOME and not). Tried extracting the PIT file out and loading it separately like you suggested. Using PrinceCosmy ODIN v3.12. I only selected auto-reboot and F. Reset Time. Still fails. Should I try selecting any other on the ODIN options tab like BL update or Nand Erase All?
I tried an earlier G935U ROM w/out breaking out the PIT file and it failed too.

kckish said:
Thanks for your help on this. Yes, the phone is currently on the B/11 bootloader.
I selected the appropriate BL, AP, CP, CSC (tried both HOME and not). Tried extracting the PIT file out and loading it separately like you suggested. Using PrinceCosmy ODIN v3.12. I only selected auto-reboot and F. Reset Time. Still fails. Should I try selecting any other on the ODIN options tab like BL update or Nand Erase All?
View attachment 5605813
I tried an earlier G935U ROM w/out breaking out the PIT file and it failed too.
Click to expand...
Click to collapse
your not showing the flash error from odin so I really dont know

jrkruse said:
your not showing the flash error from odin so I really dont know
Click to expand...
Click to collapse
try using regular odin

Split out PIT from CSC which checks ‘re-partition’ option, loading BL, AP, CP, CSC:
Auto-reboot, F Reset Time and Phone bootloader update is also checked.
This is with regular odin. Not much on the error though.
At one point, I got an error on writing emmc_appsboot.mbn.lz4 from the BL. 'Write failed' was the error. Now the phone is stuck in a boot loop, unless in download mode.

kckish said:
Split out PIT from CSC which checks ‘re-partition’ option, loading BL, AP, CP, CSC:
Auto-reboot, F Reset Time and Phone bootloader update is also checked.
This is with regular odin. Not much on the error though.
View attachment 5606045
At one point, I got an error on writing emmc_appsboot.mbn.lz4 from the BL. 'Write failed' was the error. Now the phone is stuck in a boot loop, unless in download mode.
Click to expand...
Click to collapse
Use this odin and maybe try a different cable also make sure the files are on your computer and not a storage device

Thank you! Switching the cable worked! I got so far down the rabbit hole, I forgot to check something like that.