I am new to MOJO. I just rooted using the method suggested on the mad catz site. I am playing gameloft games like Modern Combat 5.
My issue is that my WIFI connection is awful and drops in and out. I have the mojo hard wired with ethernet, but modern combat 5 keeps saying i need to be on wifi to play multiplayer. I change to mojo to wifi, and turn off ethernet but the connection is too unstable to continue. Is there a way i can make the mojo think its on wifi but just use my hardwire connection?
It seems alot of the gameloft games require a wifi connection at some point. I understand it wants a more stable connection than 3g/4g but i wish there was a work around for hardwired devices.
I have tried the xposed installer with fake wifi connection but that did not solve my problem.
Any other suggestions?
spillcox said:
I have tried the xposed installer with fake wifi connection but that did not solve my problem.
Any other suggestions?
Click to expand...
Click to collapse
Really, I got it working, i'm on firmware v 202
Related
Hi guys,
To make a long story short I recently bought a Touch pro (im with alltel). I have installed wmwifirouter on my phone in hopes of using my phone as a router to connect to xbox live. Unfortunalety I have running into the problem where on the xbox live test screen it will not go pass the MTU test. I always get the MTU error status and I cannot go any further. I have read though various online sites that in order for xbox live to connect, the MTU setting on the router has to be higher than 1365. So.... my question is..... where is that setting on wmwifirouter and how do i change it.... or is there any other way to fix this problem?..... any help would be great!!!!!
I´ve got the same problem. Anyone with an answer?
I'm trying the same with my Wii but it not work with an ad-hoc network. I think that Wmwifirouter only offers this network type to sharing internet connection.
Sorry for posible errors in my english.
Shame this.
I thought it could route all network traffic but only appears to be basic.
You can get an old linksys router and install ddwrt then use the Router as a wifi repeater
If you get the version with more ram on it you can get the Fat version of DDwrt otherwise you will have to get the micro build.
It's able to route your network traffic to your wifi hub and is probably going to be more relyable as you can boost the signal output too.
I... tried to do this. and i won.
after MUCH time trying to get my 360live i finally did this...
Htc Mogul...wifirouter puttin out wifi...to my alienware laptop...eithernet cable to 360.
i thought thered be pretty bad lag... my stats prove otherwise
no problems here
I have a Touch Pro (Sprint) and I use Wifi Router regularly to connect to XBox live when not at home. It seems to work fine. I dont know about changing any settings or anything like that. I know this doesnt help you but just so you know that it has been done successfully without a hitch. No cables needed.
I have the Fuze and with WMWifirouter, DD-WRT installed on an old WRT54GL, a 12 cell rechargeable battery, some cables and a signal booster I was able to build a portable wifi station that can recharge and I usually get 9 hours of use from the router. Unfortunately the Fuze's battery usually dies within 4 hours of using WMWifirouter so it's kinda pointless but I can recharge it in the car. Maybe I could solder a USB port to the router just to charge. Anyways I use this with my Wii and PS3 and I rarely experince lag online
Anybody knows if it is possible to connect a PSP or a PS3 with the Nexus one using My WIFI Tether. I guess the most important one would be the PSP
My PSP doesn't seems to see the nexus wifi connection like the laptop does.
Thanks!
When you have wifi tether setup on the N1, the wireless radio is set for ad-hoc connection, no infrastructure. Change the Wifi settings on your psp and ps3 to connect through ad-hoc. But speed won't be the greatest, but it works.
tribalmunky said:
When you have wifi tether setup on the N1, the wireless radio is set for ad-hoc connection, no infrastructure. Change the Wifi settings on your psp and ps3 to connect through ad-hoc. But speed won't be the greatest, but it works.
Click to expand...
Click to collapse
I tried that but it fails, is it working foryou that way?
cmarti said:
I tried that but it fails, is it working foryou that way?
Click to expand...
Click to collapse
No, I have no reason to. It should work in theory.
Seems like the adhoc on the PSP is for connection only to the PS3 and others PSP's.
I searched online but cant seem to find anyone who is using the Nexus to connect to psp
cmarti said:
Seems like the adhoc on the PSP is for connection only to the PS3 and others PSP's.
I searched online but cant seem to find anyone who is using the Nexus to connect to psp
Click to expand...
Click to collapse
Which is incorrect. I've connected my PSP to my PC fine with Xlink Kai.
But it the PSP does not connect to the Nexus! It can't see the access point and even if I put it manually it cannot connect.
I've noticed with the new CM 5.0.5.3 the wireless and wired tether say they are not supported due to the kernal but still brodcast a signal that my laptop and psp and ps3 cannot find..
Even after reflashing to older versions it says this. I'd love to play my psp at work online
-Charlie
Tether PS3
I haven't done this, but you might try it...
http://forum.xda-developers.com/showthread.php?t=632326
Also from the same person:
http://forum.xda-developers.com/showthread.php?t=610858
dahui9 said:
Even after reflashing to older versions it says this. I'd love to play my psp at work online
-Charlie
Click to expand...
Click to collapse
That's what I am trying to do too
I'm still waiting my 11 days to get the new CM on my nexus (see sig) but I can't remember if you could set the phones IP address and manually configure the psp to connect to it?
in theory it should work if I can get my ps3 to see it.
I have been trying to get my zune to see it but it doesnt. Cant tether to my psp either. Tethers great to my iPod touch though.
MvP77 said:
I have been trying to get my zune to see it but it doesnt. Cant tether to my psp either. Tethers great to my iPod touch though.
Click to expand...
Click to collapse
Something funny!
I tether my wife's iPhone with the Nexus and the download speed was faster than the at&t itself.
My daughter has been playing cut the rope without internet connection. But this week she started the game and says "internet connection needed".
this the paid app from amazon marketplace and not rooted, any solutions?
I've gotten this message with some apps myself even though I've had them open previously without a wifi connection. Opening them with the wifi connected fixes it for the time being and I'm able to play without internet again.
kls629 said:
My daughter has been playing cut the rope without internet connection. But this week she started the game and says "internet connection needed".
this the paid app from amazon marketplace and not rooted, any solutions?
Click to expand...
Click to collapse
Might be similar to xbox live games requiring Internet connection to play them on the 360 Probably their way of preventing piracy. Just a thought.
Krunkatron said:
I've gotten this message with some apps myself even though I've had them open previously without a wifi connection. Opening them with the wifi connected fixes it for the time being and I'm able to play without internet again.
Click to expand...
Click to collapse
i will try this today, havent had time to connect it to wifi yet
Might be an in app update or additional content needed thats online. Usually if you update or run it with WiFi itll be good till the next update.
Hi all,
I've had my Shield for 6 months and has mostly been trouble free.
Since updating to 3.0 Marshmallow network performance seems to have tanked.
Play Store is very slow to load. YouTube is very slow to load between channels and I have a hard time streaming anything over 480p. Sometimes I just get an error.
My connection is 100Mbps and I have no performance issues on my PC which is in the same room as the Shield.
I have a Virgin Superhub 2 for routing and a Cisco RV220W as an AP. My network is 2.4GHz but there are few networks around me so interfering is unlikely.
I factory reset after 3.0 update. I am also rooted but have no apps to use root yet. I'd rather not wipe and roll back to 2.1.
Suggestions?
skymera said:
Hi all,
I've had my Shield for 6 months and has mostly been trouble free.
Since updating to 3.0 Marshmallow network performance seems to have tanked.
Play Store is very slow to load. YouTube is very slow to load between channels and I have a hard time streaming anything over 480p. Sometimes I just get an error.
My connection is 100Mbps and I have no performance issues on my PC which is in the same room as the Shield.
I have a Virgin Superhub 2 for routing and a Cisco RV220W as an AP. My network is 2.4GHz but there are few networks around me so interfering is unlikely.
I factory reset after 3.0 update. I am also rooted but have no apps to use root yet. I'd rather not wipe and roll back to 2.1.
Suggestions?
Click to expand...
Click to collapse
Not sure how much help this is
Theres an app in the playstore that specifically tests your local network speeds, if you happen to have two android devices, install the app on both devices, one being the shield, and see if your having the same results.........i dont think its likely, but if it transfrs at full speed it might narrow down your search a bit........trial and error
Edit
Whoops.....forgot to link to app
https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester
Hello all! New here but not new to forums in general.
Right now I have fully unlimited data with sprint, and use easy tether pro to connect to my windows pc and play games on.
The only problem is that I end up having a strict nat type and cant play games like rainbow 6 siege, but thats not my worries.
I play Cod ww2 on ps4 and only have 20gb of home wifi so whenever i get close to 18 i stop using it for games and switch over to plugging my phone into my Mac laptop and sharing the connection over wifi. It works but gives me Nat type 3 in game. I have tried bridging connections from my pc to my ps4 using an ethernet cable but my ps4 doesn't want to accept the connection even when i type in all the addresses manually.
HERE THE BUT ----- When i enable the factory wifi hotspot on my phone, I get Nat Type 2, which is perfectly fine for me to play CoD with, but i only have 3gb of wifi sharing a month. Is there any way for me to plug my phone into my mac, share its connection over wifi, and get Nat Type 2???
PS. My phone is not rooted nor am i willing to root it unless a professional does it for me, and there are no pro's around here.
Seth_J said:
Hello all! New here but not new to forums in general. Right now I have fully unlimited data with sprint, and use easy tether pro to connect to my windows pc and play games on.
The only problem is that I end up having a strict nat type and cant play games like rainbow 6 siege, but thats not my worries...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3110220
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Adding Static IP to your account will get you NAT Type 2. It's like $3 extra a month and you can do it on the website. It's what I have with my Nexus 6 / PS4 Pro. 700GB this month so far, 1.02TB last month.
LaGgY_42o said:
Adding Static IP to your account will get you NAT Type 2. It's like $3 extra a month and you can do it on the website. It's what I have with my Nexus 6 / PS4 Pro. 700GB this month so far, 1.02TB last month.
Click to expand...
Click to collapse
And that will work even if Im tethering to a Mac through a cable then sharing over wifi to the ps4??
Seth_J said:
And that will work even if Im tethering to a Mac through a cable then sharing over wifi to the ps4??
Click to expand...
Click to collapse
I would assume since the main device would still be operating with a static IP. If you are the account holder just enable it and ur phone will immediately reconnect, if it doesn't work just take it back off. When I first did it the ROM I was on had issues reconnecting so I disabled it 30 min later and they didn't charge me. Even if they do it's less than 2 McDoubles at McDonald's lol, worth testing imo if you need Type 2 NAT badly. Like I said, works for me using the Wifi hotspot on Pure Nexus on my Nexus 6.