Database Users

[Solve] the problem of installing the ROM program odin

Hello my friends, how are you all
I present to you a simple explanation to you suffers from spam in odin
For example:
Code:
complete write operation failed
Odin flash fail
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> system.img
<ID:0/025> NAND Write Start!!
<ID:0/025>
<ID:0/025> Complete(Write) operation failed.
<ID:0/025> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The simple solution is to follow the following steps:
1-The installation program Odin3 v3.07
2-Enter the download status And connect the phone to the computer
Then open the program Odin
3-We download the file PIT
4-And sail on this phone to correct some errors and keep in the PIT box in Odin
5-We work to Wipe factory
6-We install from four files
I9500XXUAMDE_I9500ODDAMDC_INU.zip
7-After we wipe factory And restart the phone.:good:
And here we have the explanation and I hope I succeeded the explanation Greetings everyone

Thank you friend, looks very useful!

tamirda said:
Thank you friend, looks very useful!
Click to expand...
Click to collapse
Thank you my friend tamirda
Sent from my GT-I9500 using xda app-developers app

Why are you messing around with the PIT file?
This is the easiest way to brick your phone if the pit file you use is corrupt or not for your phone. And I'm not talking about soft brick thats recoverable... You will have a brand new $600+ paperweight...
All you need to flash is the rom file (must be either .tar or .tar.md5) in PDA, make sure repartition isn't ticked and flash...
Also make sure KIES is NOT RUNNING...
If you have the new firmware, MH8, then this definately WON'T work...

I have the same problem but the solution does not work
I try to install this rum brought here and what I get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500ODDAMDC_I9500DDUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9500
S4
Anyone know what can be done
The device enters only state DOWNLOAD not RECOVERY

yony100200 said:
I try to install this rum brought here and what I get this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUAMDE_I9500ODDAMDC_I9500DDUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
GT-I9500
S4
Anyone know what can be done
The device enters only state DOWNLOAD not RECOVERY
Click to expand...
Click to collapse
simply go to http://www.sammobile.com/firmwares/2/
download your latest firmware and flash via odin
1. do no check RE-PARTITION option..leave it with auto-reboot and F.reset time (DEFAULT option)
2. flash only PDA file or single file downloaded from sammobile

Help, Phone Says " Firmare Upgrade encountered an issue, Please use Software Repair

Help, Phone Says " Firmare Upgrade encountered an issue, Please use Software Repair
Hey Guys,
I have no clue what happened, Phone is stuck in ODIN Mode,
I am in odin 3.09, downloaded the pit file and the latest MJE firmware and i get to this step.
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help a lost soul...
Justin

Install pit by itself. Restart in recovery and factory wipe. Then install firmware
If I helped hit thanks!!

I did the pit file, not it stays locked at Samsung Galaxy Note 3 screen.
2swizzle said:
Install pit by itself. Restart in recovery and factory wipe. Then install firmware
If I helped hit thanks!!
Click to expand...
Click to collapse

Pit File - HLTE_USA_VZW_32G.PIT
PDA - MI9/MJ7/MJE (none work)
I am running odin as an administrator. I just can't get this thing to download to the phone... am i doing something wrong..
I put the phone in download mode.
Ive Done :
Download the MJE Stock Firmware 1.3 GB and extract it once...
Download latest ODIN 3.09...
In your device go into Download mode(Vol Down+Home Button+Power Button) and again Volume Up for Download mode...
Right click ODIN and open as administrator...
Now connect your device to PC and check the status in ODIN as Connected... (COM 5)
Make sure that only Auto Reboot and F.Reset Time are checked in ODIN...
Click on AP and select the extracted file from MJE firmware...
After checking the MD5 file...Click on START and wait I get the following error
-<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_N900VVRUBMI9_N900VVZWMI9_1671014_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
is there something I am missing?
Thanks in advance!

Looks like you are trying to install I9 in your second post. Unless you were on i9 to start with you cannot downgrade. At the top of your post you refer to MJE. That is probably the reason.
Sent from my SM-N900V using Tapatalk

ive tried them all.. still no luck... verizon is sending me a new phone... it should load through odin, it doesn't nothing..

Well the issue was I was running ODIN in my VMWare Windows 7 Virtual Machine. I got my new phone today from verizon, for ****s i hooked it up to my old Windows XP machine and it went with out a hitch. I unplugged it was 75% so they can have it showing ODIN MODE..
Thanks for all the help...

[Q] Modem Upgrade Problem

When upgrading to the new 4.4.2 of my I9505 I had to flash the new Bootloader and Modem XXUFNA5.
I flashed the boot loader, but when I tried to flash the Modem with Odin 3.09 I got stuck. The Phone is booting and working fine but I can't make calls. I downloaded the modem file (h GSM_Modem_XXUEMJ5_and_LTE_Modem_XXUEMJ5.tar) from several sources and flashed them without success. I tried to flash other modems and roms also without success. The things I can flash with odin is the Bootloader and CWM.
Anybody has an Idea what to do because I run out of them.
Thanks

lubluchka said:
When upgrading to the new 4.4.2 of my I9505 I had to flash the new Bootloader and Modem XXUFNA5.
I flashed the boot loader, but when I tried to flash the Modem with Odin 3.09 I got stuck. The Phone is booting and working fine but I can't make calls. I downloaded the modem file (h GSM_Modem_XXUEMJ5_and_LTE_Modem_XXUEMJ5.tar) from several sources and flashed them without success. I tried to flash other modems and roms also without success. The things I can flash with odin is the Bootloader and CWM.
Anybody has an Idea what to do because I run out of them.
Thanks
Click to expand...
Click to collapse
Download and extract this file and flash it via odin by selecting Phone/CP. Have a nice day.

Repulsa said:
Download and extract this file and flash it via odin by selecting Phone/CP. Have a nice day.
Click to expand...
Click to collapse
Thank you for your reply, however I had the result:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
:crying:

lubluchka said:
Thank you for your reply, however I had the result:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
:crying:
Click to expand...
Click to collapse
Since you already have a newbootloader since after flashing the 4.4.2 leak bootloader then feel free to flash a stock 4.4.2 leak again and you need to follow this ,
INSTRUCTIONS download https://mega.co.nz/#!rIJxHTRB!ZxMSDwtDsVBD5Aw-jt9DvRiKuyEm8hdjW7Mv9eriNiI . Remember flashing this wont let you dowgrade into 4.3 stock Official rom.and your warranty is now voided.
- Extract (unzip) the firmware file
- Download Odin3 v3.09
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to BL
- Add CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
- Add CSC_OXA_I9505OXAFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!

Repulsa said:
Since you already have a newbootloader since after flashing the 4.4.2 leak bootloader then feel free to flash a stock 4.4.2 leak again and you need to follow this ,
INSTRUCTIONS download https://mega.co.nz/#!rIJxHTRB!ZxMSDwtDsVBD5Aw-jt9DvRiKuyEm8hdjW7Mv9eriNiI . Remember flashing this wont let you dowgrade into 4.3 stock Official rom.and your warranty is now voided.
- Extract (unzip) the firmware file
- Download Odin3 v3.09
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to AP
- Add BL_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to BL
- Add CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CP
- Add CSC_OXA_I9505OXAFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Click to expand...
Click to collapse
Thank you for taking the time to help me.
I already downloaded this file and tried to flash it. However I am getting the same result. After flashing the BL and when Odin starts to flash the AP file I get stuck!
It is the first time something like this happens to me and I can't figure out why the flash of anything other than the BL is failing. No clue whatsoever

lubluchka said:
Thank you for taking the time to help me.
I already downloaded this file and tried to flash it. However I am getting the same result. After flashing the BL and when Odin starts to flash the AP file I get stuck!
It is the first time something like this happens to me and I can't figure out why the flash of anything other than the BL is failing. No clue whatsoever
Click to expand...
Click to collapse
Try to boot into recovery (Power+Volumeup) do a wipe cache and factory reset after reboot quickly hold and press Power+volumedown in order to reboot download mode and try to select this files in odin and select the right place ap/cp/csc connect your cables to Pc/phone and press start. , im not really sure why is your phone is not allowing to flash any modem. but give this a try.
Add AP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5 to AP
- Add CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5 to CP
- Add CSC_OXA_I9505OXAFNA5_373648_REV06_user_low_ship_MU LTI_CERT.tar.md5 to CSC

Repulsa said:
Try to boot into recovery (Power+Volumeup) do a wipe cache and factory reset after reboot quickly hold and press Power+volumedown in order to reboot download mode and try to select this files in odin and select the right place ap/cp/csc connect your cables to Pc/phone and press start. , im not really sure why is your phone is not allowing to flash any modem. but give this a try.
Add AP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5 to AP
- Add CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_C ERT.tar.md5 to CP
- Add CSC_OXA_I9505OXAFNA5_373648_REV06_user_low_ship_MU LTI_CERT.tar.md5 to CSC
Click to expand...
Click to collapse
I just did what you told me and here is what I got:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9505OXAFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> persdata.img.ext4
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

lubluchka said:
I just did what you told me and here is what I got:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9505OXAFNA5_373648_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> persdata.img.ext4
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Make sure kies is not running in background
Try changing ports
Use diffnt cable

Repulsa said:
Make sure kies is not running in background
Try changing ports
Use diffnt cable
Click to expand...
Click to collapse
I changed ports, cables computers....
It is really a puzzle!

Odin error HELLP

HI guys . i have g900H and i want to update my current softwear to new one and i downloaded this file from samsung update G900HXXU1ANE2_G900HOXE1ANE2_G900HXXU1ANE2_HOME.tar.md5 but i got an error with Odin 3.06 , 3.07 , 3.09
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900HXXU1ANE2_G900HOXE1ANE2_G900HXXU1ANE2_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
but when i try to install this frimware G900HXXU1ANCI_G900HOJV1ANCH_G900HXXU1ANCI_HOME.tar.md5 i have no error.. what happend ? i download both with IDM 100 % downloaded.

I didn't had issues, try:
- Removing sim and sdcard.
- Disable reactivation lock in Security settings.

drakester09 said:
I didn't had issues, try:
- Removing sim and sdcard.
- Disable reactivation lock in Security settings.
Click to expand...
Click to collapse
i did but steel have error ((((

please some one help me

[Q] Requesting a PIT file for SM-T530NU

I've done everything to restore to stock firmware. I used odin-v3.10.6 and Kies 3. They both stop at 4%. My firmware is T530NUUEU1BOE5_T530NUXAR1BOE5_XAR.zip. But I can flash TWRP-2.8.7 via Odin just fine. But I am running out of ideas.
T530NUUEU1BOE5_T530NUXAR1BOE5_HOME.tar.md5 (2,225,735,835 bytes)
MD5: 5358d7e9247803a164d9a8cbc713bc55
T530NUUEU1BOE5_T530NUXAR1BOE5_XAR.zip (1,351,979,593 bytes)
MD5: 5c910ca3b4599971669cddf445fef8dc
This is why I'm requesting a PIT file or another solution.
Thanks
Sakui

sakui23 said:
I've done everything to restore to stock firmware. I used odin-v3.10.6 and Kies 3. They both stop at 4%. My firmware is T530NUUEU1BOE5_T530NUXAR1BOE5_XAR.zip. But I can flash TWRP-2.8.7 via Odin just fine. But I am running out of ideas.
T530NUUEU1BOE5_T530NUXAR1BOE5_HOME.tar.md5 (2,225,735,835 bytes)
MD5: 5358d7e9247803a164d9a8cbc713bc55
T530NUUEU1BOE5_T530NUXAR1BOE5_XAR.zip (1,351,979,593 bytes)
MD5: 5c910ca3b4599971669cddf445fef8dc
This is why I'm requesting a PIT file or another solution.
Thanks
Sakui
Click to expand...
Click to collapse
Try taking off the .md5 extension, or try the Canadian Firmware file, or try KitKat instead.
Also try doing a factory reset in recovery before flashing the firmware file

thisisapoorusernamechoice said:
Try taking off the .md5 extension, or try the Canadian Firmware file, or try KitKat instead.
Also try doing a factory reset in recovery before flashing the firmware file
Click to expand...
Click to collapse
Some reason TWRP-v2.8.7 can't mount /system when I do a wipe. Is there a way to do it manually and wipe it myself?
Thanks
Sakui

sakui23 said:
Some reason TWRP-v2.8.7 can't mount /system when I do a wipe. Is there a way to do it manually and wipe it myself?
Thanks
Sakui
Click to expand...
Click to collapse
If you want you always can to use service firmware for your device from here http://forum.xda-developers.com/showpost.php?p=61896173&postcount=1 .
This firmware include pit-file .

thisisapoorusernamechoice said:
Try taking off the .md5 extension, or try the Canadian Firmware file, or try KitKat instead.
Also try doing a factory reset in recovery before flashing the firmware file
Click to expand...
Click to collapse
I tried everything you said and I got no where. TWRP complained that the file system was read only.

repey6 said:
If you want you always can to use service firmware for your device from here http://forum.xda-developers.com/showpost.php?p=61896173&postcount=1 .
This firmware include pit-file .
Click to expand...
Click to collapse
I'm trying it right now. I'm just confused why Odin stops at system.img.ext4. Is the partition corrupt because its read only? But I installed a custom ROM (BlissPOP) and it worked fine.

sakui23 said:
I tried everything you said and I got no where. TWRP complained that the file system was read only.
Click to expand...
Click to collapse
In TWRP 2870 you need uncheck checkbox on Mount button

repey6 said:
If you want you always can to use service firmware for your device from here http://forum.xda-developers.com/showpost.php?p=61896173&postcount=1 .
This firmware include pit-file .
Click to expand...
Click to collapse
Service firmware [SM-T530NUUEU1BOE5_XAR_SERVICE_LP.zip] didn't work. It stopped at 4% again. But I have 5.0.1 and not 4.4. TWRP won't let me check "system" under mount.

It stopped at 4% again
Click to expand...
Click to collapse
What is 4% ? Where ? I dont understand this .

repey6 said:
What is 4% ? Where ? I dont understand this .
Click to expand...
Click to collapse
That's where Kies 3 stopped at. It stops in system.img.ext4 [Odin-v3.10.6] at the beginning of it. But it does process it but very little of it.

sakui23 said:
That's where Kies 3 stopped at. It stops in system.img.ext4 [Odin-v3.10.6] at the beginning of it. But it does process it but very little of it.
Click to expand...
Click to collapse
Why Kies . Close it . Use only Odin with him guide . Go to dounload mode . Connect to PC . In Odin download unpack service firmware (BL , AP , CSC ) to their button . And start . Please copy Odin log to me .

Odin v1.85
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_XAR_T530NUXAR1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The newer version don't spit out an error. Just sits there.

Stop Kies and delete from processes . Stop antivirus .

sakui23 said:
Odin v1.85
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_T530NUUEU1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_XAR_T530NUXAR1BOE5_CL4910899_QB4956020_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The newer version don't spit out an error. Just sits there.
Click to expand...
Click to collapse
Correct, kies is awful don't use it. Also use Odin v3.10 or 3.09, not 1.85

Boy, do I feel very stupid...
It was the cords. I had 2 extension USB cords attached to the cord for the Tab 4 and used a different USB port.
Now, the service and the regular firmware works now.
Thanks for everything.
Sakui