Odin error HELLP - Galaxy S 5 Q&A, Help & Troubleshooting

HI guys . i have g900H and i want to update my current softwear to new one and i downloaded this file from samsung update G900HXXU1ANE2_G900HOXE1ANE2_G900HXXU1ANE2_HOME.tar.md5 but i got an error with Odin 3.06 , 3.07 , 3.09
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900HXXU1ANE2_G900HOXE1ANE2_G900HXXU1ANE2_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> modem.bin
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
but when i try to install this frimware G900HXXU1ANCI_G900HOJV1ANCH_G900HXXU1ANCI_HOME.tar.md5 i have no error.. what happend ? i download both with IDM 100 % downloaded.

I didn't had issues, try:
- Removing sim and sdcard.
- Disable reactivation lock in Security settings.

drakester09 said:
I didn't had issues, try:
- Removing sim and sdcard.
- Disable reactivation lock in Security settings.
Click to expand...
Click to collapse
i did but steel have error ((((

please some one help me

Related

[Q] GT-I9505 Firmware upgrade failed.

I tried to upgrade my galaxy s4 to android 4.4.2 using odin.
But while performing the process, odin said it failed
now my galaxy says " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again".
i am from Nepal.
Thank you
MODEL: GT-I9505
FCC ID : A3LGTI9505
SSN : -I9505GsMH
With this little information, there is not much we can do. You need to give more details if you want help.
What was the error? What firmware did you try to flash? What steps did you take? Did you try a different usb cable, different ports, different pc etc etc.
Lennyz1988 said:
With this little information, there is not much we can do. You need to give more details if you want help.
What was the error? What firmware did you try to flash? What steps did you take? Did you try a different usb cable, different ports, different pc etc etc.
Click to expand...
Click to collapse
i used odin v3.09.
I tried flashing with the stock firmware but couldnot.
steps i took is shown in attachments.
error in my odin is
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505YXYFNC1_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> sbl3.mbn
<ID:0/006> rpm.mbn
<ID:0/006> aboot.mbn
<ID:0/006> tz.mbn
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!
yes i tried diffent pcs, and with different cables, and different usb port too..
sakarmaskey said:
i used odin v3.09.
I tried flashing with the stock firmware but couldnot.
steps i took is shown in attachments.
Click to expand...
Click to collapse
Try to flash the same firmware like the pic attached.
Joku1981 said:
Try to flash the same firmware like the pic attached.
Click to expand...
Click to collapse
same problem occured!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505YXYFNC1_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl2.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!

[Q] needing help to root the phone

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
I have tried with ODIN versions: 3.07, 3.09, 3.04 - i have red several guides. I have rooted many phones starting from iPhone 3G to several samsungs. It seems that it has some kind of write protection.
Android version: 4.4.2
Baseband N9005XXUENC2
Build number KOT49H:N9005XXUEND3
SE for Andoird status SEPF_SM-n9005_4.4.2_001
Any ideas?
I had this problem once.. I tried other stock rom with proper csc pda and modem in different files
Sent from my GT-I9300 using XDA Premium 4 mobile app
estrooter said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
I have tried with ODIN versions: 3.07, 3.09, 3.04 - i have red several guides. I have rooted many phones starting from iPhone 3G to several samsungs. It seems that it has some kind of write protection.
Android version: 4.4.2
Baseband N9005XXUENC2
Build number KOT49H:N9005XXUEND3
SE for Andoird status SEPF_SM-n9005_4.4.2_001
Any ideas?
Click to expand...
Click to collapse
Have you tried flashing with the official firmwares on SamMobile? http://www.sammobile.com/firmwares/
This may be a bad firmware file.

i can't flash a stock rom by odin

hello
my problem is when i flash a stock rom by odin it's stack on sboot.bin
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUGNH2_I9500OJVFNG1_I9500XXUGNF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> __XmitData_Read ..
<ID:0/006> XmitData Fail..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i tried many roms and many odin and i try to use another pc but it's the same problem
so what i will do now
my phone is galaxy s4 i9500 i'm using a custom rom miui v5
---------------------------------------
| finally it's solved ) thank u |
---------------------------------------
how fixed??
but how?? was that because of secure boot????

[Q] I337M Telus phone soft bricked?

Hi, I have a galaxy S4 telus i337m, and back over a year ago I flashed a new ROM which worked fine. I decided I wanted to upgrade to 4.4.2 stock firmware so I downloaded the following firmware: http://www.sammobile.com/firmwares/download/36274/I337MVLUFNI2_I337MOYAFNI2_TLS.zip/
I downloaded Odin and tried to flash this stock firmware but Odin always gives me a partition error, and now I cant even boot my phone back up to its old firmware. Any help?
This is my error as it sits now:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUFNI2_I337MOYAFNI2_I337MVLUFNI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!
Solved my issue if anyone has the same problem. Use USB 2.0 ports not 3.0

Failed root on SM-N910T now stuck at recovery booting

Bought this to make into a rooted note 4. Not my main phone yet, I have an AT&T version.
Attempted to root following the directions on CFROOT, that got me to this point. Now have spent 2 days searching for solutions and trying things. No progress!
In download mode Using Odin 3.9 and 3.10.7 the CFROOT file report success but stuck in recovery booting. Attempting to reinstall the entire firmware Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any help would be greatly appreciated!
John
dylistn said:
Bought this to make into a rooted note 4. Not my main phone yet, I have an AT&T version.
Attempted to root following the directions on CFROOT, that got me to this point. Now have spent 2 days searching for solutions and trying things. No progress!
In download mode Using Odin 3.9 and 3.10.7 the CFROOT file report success but stuck in recovery booting. Attempting to reinstall the entire firmware Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Any help would be greatly appreciated!
John
Click to expand...
Click to collapse
You're in the wrong place. These are the S4 forums, not Note 4.
Anyway, AT&T devices have a locked bootloader and I don't think CF-Auto-Root can root those.
So you may have to find another solution to rooting.
But before that you may have to flash the stock firmware again, as the current one is messed up by the failed root flash.
Thank you
I thought I had the right forum. Can I move this to another forum. Or should I start a new thread and delete this?
dylistn said:
I thought I had the right forum. Can I move this to another forum. Or should I start a new thread and delete this?
Click to expand...
Click to collapse
It can be moved. Select the report option and as a reason select thread moving.

Categories

Resources