[Q] I337M Telus phone soft bricked? - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Hi, I have a galaxy S4 telus i337m, and back over a year ago I flashed a new ROM which worked fine. I decided I wanted to upgrade to 4.4.2 stock firmware so I downloaded the following firmware: http://www.sammobile.com/firmwares/download/36274/I337MVLUFNI2_I337MOYAFNI2_TLS.zip/
I downloaded Odin and tried to flash this stock firmware but Odin always gives me a partition error, and now I cant even boot my phone back up to its old firmware. Any help?

This is my error as it sits now:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUFNI2_I337MOYAFNI2_I337MVLUFNI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!

Solved my issue if anyone has the same problem. Use USB 2.0 ports not 3.0

Related

[Q] How do I install Stock Rom on Galaxy S4

Hello,
I'm trying to flash stock rom for my Galaxy S4 through Odin v3.07, but whenever I try to flash it I get the following error:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sbl2.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Can anybody help me or tell me what I'm doing wrong.
Thanks in advance!

[Q] needing help to root the phone

<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
I have tried with ODIN versions: 3.07, 3.09, 3.04 - i have red several guides. I have rooted many phones starting from iPhone 3G to several samsungs. It seems that it has some kind of write protection.
Android version: 4.4.2
Baseband N9005XXUENC2
Build number KOT49H:N9005XXUEND3
SE for Andoird status SEPF_SM-n9005_4.4.2_001
Any ideas?
I had this problem once.. I tried other stock rom with proper csc pda and modem in different files
Sent from my GT-I9300 using XDA Premium 4 mobile app
estrooter said:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
I have tried with ODIN versions: 3.07, 3.09, 3.04 - i have red several guides. I have rooted many phones starting from iPhone 3G to several samsungs. It seems that it has some kind of write protection.
Android version: 4.4.2
Baseband N9005XXUENC2
Build number KOT49H:N9005XXUEND3
SE for Andoird status SEPF_SM-n9005_4.4.2_001
Any ideas?
Click to expand...
Click to collapse
Have you tried flashing with the official firmwares on SamMobile? http://www.sammobile.com/firmwares/
This may be a bad firmware file.

i can't flash a stock rom by odin

hello
my problem is when i flash a stock rom by odin it's stack on sboot.bin
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUGNH2_I9500OJVFNG1_I9500XXUGNF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> __XmitData_Read ..
<ID:0/006> XmitData Fail..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i tried many roms and many odin and i try to use another pc but it's the same problem
so what i will do now
my phone is galaxy s4 i9500 i'm using a custom rom miui v5
---------------------------------------
| finally it's solved ) thank u |
---------------------------------------
how fixed??
but how?? was that because of secure boot????

Note 3 N900 Flash Problem's

Hi,
I'm Raj from india. I own a Samsung galaxy note 3 N900 exynos model. I flashed the device with Android M-cyanogenmod 13 using "ODIN" due to lots of bugs i disliked that mod. I tired flashing the stock android 5.0 for note 3 N900 but i'm not able to flash and i'm just reaching til this point. Please help me out with this error.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUCMK2_N900ODDCMK1_N900DDUCMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
MY NOTE 3 SCREEN DISPLAYED THIS MESSAGE AFTER TRYING THIS FLASH:
"sw rev check fail device 4 binary 3"
TRIED FLASHING WITH:
N900XXUCMK2_N900ODDCMK1_N900DDUCMK1_HOME.tar.md5
iamsrajchowhan said:
Hi,
I'm Raj from india. I own a Samsung galaxy note 3 N900 exynos model. I flashed the device with Android M-cyanogenmod 13 using "ODIN" due to lots of bugs i disliked that mod. I tired flashing the stock android 5.0 for note 3 N900 but i'm not able to flash and i'm just reaching til this point. Please help me out with this error.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUCMK2_N900ODDCMK1_N900DDUCMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
MY NOTE 3 SCREEN DISPLAYED THIS MESSAGE AFTER TRYING THIS FLASH:
"sw rev check fail device 4 binary 3"
TRIED FLASHING WITH:
N900XXUCMK2_N900ODDCMK1_N900DDUCMK1_HOME.tar.md5
Click to expand...
Click to collapse
Other than "sw check..." does it shows "reactivation lockn"?.
Sent from my SM-N920C
No i haven't got any message like "Reactivation lock" I've downloaded an another rom from samsung official websites for official rom's and tried installing and it successfully got flashed. Few decices doesn't flash with INU and few with the other so i tried both of the Indian versions.
Are you flashing the latest rom for the phone from sammobile.com?

Downgrading from android 6.0.1 to android 5.0 to root and install lineage OS failing

Hi, I am a samsung noob trying to downgrade my phone on the latest 6.0.1 firmware to 5.0 so I can root and unlock the bootloader to get TWRP and flash lineage OS. Each time I flash stock firmware I get this error. Here is my odin log.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Your bootloader is on newer version you cant downgrade sorry

Categories

Resources