G2 seems to have worse LTE reception compared to few other devices I had, is there anyway to disable LTE and go down to HSPA or HSPA+?
I know my area has terrible LTE coverage, but for some reason it sticks to LTE even if it means I am forced to 0.3mbps speeds! Ouch.
hydeah said:
G2 seems to have worse LTE reception compared to few other devices I had, is there anyway to disable LTE and go down to HSPA or HSPA+?
I know my area has terrible LTE coverage, but for some reason it sticks to LTE even if it means I am forced to 0.3mbps speeds! Ouch.
Click to expand...
Click to collapse
You can disable LTE from the service menu,use the code 5457#*(your phone model here)# And you will find an option there with the bands to do so.You can enable only the ones you want and dissable all others.Dont change anything else tho.I cant tell you exactly where you will find it cause the menu is slightly different for every variant it seems.
woof123 said:
You can disable LTE from the service menu,use the code 5457#*(your phone model here)# And you will find an option there with the bands to do so.You can enable only the ones you want and dissable all others.Dont change anything else tho.I cant tell you exactly where you will find it cause the menu is slightly different for every variant it seems.
Click to expand...
Click to collapse
Thank you so much, I remember now people were running this trick on Nexus 4, but sadly it did not work. When you say Model here, I just put numbers only right? I got the D800 from AT&T, in dialer I just hit 5457#*800# and hit call, nothing happens, I get invalid MMI error. I tried 5457#800# no luck.
However, using your suggestion, I found the code to access service menu, but it wasn't as clear as I hoped it would be so I did not touch anything.
Code:
AT&T LG G2 D800 Service Menu: 3845#*800#
T-Mobile LG G2 D801 Service Menu: 3845#*801#
Verizon LG G2 VS980 Service Menu: 3845#*980#
Sprint LG G2 LS980 Service Menu: 3845#*980#
I expected on/off switches, but there is WDCMA-Only, LTE-Only, and nothing else. There is no HSPA or HSPA+ only or any switch, and I don't want to hit LTE only assuming that will limit the reception to LTE and I will get stuck with no coverage when there is no LTE.
On Sprint, I can go into data settings via dialer (##3282#), and edit LTE screen (requires service code). From there, I can disable LTE and force CDMA/EvDo. Of course, this is on Sprint variant, not sure how AT&T/T-Mobile does it or whichever carrier you're on.
Ascertion said:
On Sprint, I can go into data settings via dialer (##3282#), and edit LTE screen (requires service code). From there, I can disable LTE and force CDMA/EvDo. Of course, this is on Sprint variant, not sure how AT&T/T-Mobile does it or whichever carrier you're on.
Click to expand...
Click to collapse
I am on ATT and I can't find this setting anywhere.
Sent from my LG-D800
I also tried *#*#4636#*#* which does not let me go into OEM-Info or any Radio selection.
Why does AT&T do this!?
I believe if you go into settings and go into the mobile networks menu, there is a menu that allows you to choose whether the phone will go into LTE if available or just stay on 4G HSPA+. I'm getting my G2 tomorrow, so I don't remember exactly how I did it when I played with it in the store. If you can't find it, I'll let you know what it is once I get my phone. This is with the T-Mobile G2.
Howie Dub said:
I believe if you go into settings and go into the mobile networks menu, there is a menu that allows you to choose whether the phone will go into LTE if available or just stay on 4G HSPA+. I'm getting my G2 tomorrow, so I don't remember exactly how I did it when I played with it in the store. If you can't find it, I'll let you know what it is once I get my phone. This is with the T-Mobile G2.
Click to expand...
Click to collapse
In order of Nice to Naughty,
Sprint
T-Mobile
AT&T
Verizon (wayyyyy low in the list, naughtiest)
So, considering above, I am pretty sure A&T disabled that menu you are referring to (In Mobile Networks) some confirmed it working on Sprint, but I don't think it is available on AT&T. I am stuck with LTE.
hydeah said:
In order of Nice to Naughty,
Sprint
T-Mobile
AT&T
Verizon (wayyyyy low in the list, naughtiest)
So, considering above, I am pretty sure A&T disabled that menu you are referring to (In Mobile Networks) some confirmed it working on Sprint, but I don't think it is available on AT&T. I am stuck with LTE.
Click to expand...
Click to collapse
Sorry, missed it earlier when you said you were on AT&T. Are you able to go to Settings > Tethering & networks > Mobile networks > Network mode? With the T-Mobile version, there's gsm/wcdma/lte auto, gsm/cdma auto, wcdma only, and gsm only selections under the Network Mode menu. That would really suck if they diabled that setting. I'm assuming you're on stock unrooted.
Howie Dub said:
Sorry, missed it earlier when you said you were on AT&T. Are you able to go to Settings > Tethering & networks > Mobile networks > Network mode? With the T-Mobile version, there's gsm/wcdma/lte auto, gsm/cdma auto, wcdma only, and gsm only selections under the Network Mode menu. That would really suck if they diabled that setting. I'm assuming you're on stock unrooted.
Click to expand...
Click to collapse
Nope, it's not there.
ATT disabled it.
Sent from my LG-D800
Possible solution for your case: http://forum.xda-developers.com/showthread.php?t=2361631#post60145354
Ascertion said:
On Sprint, I can go into data settings via dialer (##3282#), and edit LTE screen (requires service code). From there, I can disable LTE and force CDMA/EvDo. Of course, this is on Sprint variant, not sure how AT&T/T-Mobile does it or whichever carrier you're on.
Click to expand...
Click to collapse
Where i can get this "service code"? I just want do the oposite, i want to activate LTE.
Did you ever figure this out?
Superorb said:
Did you ever figure this out?
Click to expand...
Click to collapse
Service code for the d800 is 3845#*800#
Go to LTE settings, modem setting, then select RAT then you can force what ever mode you want.
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Service code for the d800 is 3845#*800#
Go to LTE settings, modem setting, then select RAT then you can force what ever mode you want.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
There's no RAT selection for me under the LTE modem settings. I have LTE Band Selection, VoLTE Radio, Null Integrity, and LTE-A CA.
Superorb said:
There's no RAT selection for me under the LTE modem settings. I have LTE Band Selection, VoLTE Radio, Null Integrity, and LTE-A CA.
Click to expand...
Click to collapse
Try using a custom ROM such as cloudy g2 I know it works there because that is what I am using
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Try using a custom ROM such as cloudy g2 I know it works there because that is what I am using
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Alright, thanks.
I use this tool from the market to force the band(s) I want...
https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher
I'm on Cloudy 2.2 and it works like a charm.
nomad4ever said:
I use this tool from the market to force the band(s) I want...
https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher
I'm on Cloudy 2.2 and it works like a charm.
Click to expand...
Click to collapse
Thanks!
Hi how can i turn only lte mode on my unbranded g900f? Ive been trying different codes for service menu none of them were working. Anyone knows?
qucharski said:
Hi how can i turn only lte mode on my unbranded g900f? Ive been trying different codes for service menu none of them were working.
Click to expand...
Click to collapse
It's hard to imagine a good reason for doing this. LTE is a power hungry mode and you'd end up with no service when 3G was available but LTE was not. Nevertheless you can set the band preference to LTE in the service mode menu. I don't believe that there is any explicit setting to set LTE exclusively unless you leave your phone in test mode, locked on one channel, which would have substantial drawbacks.
You could look into apps that claim to do what you want. I don't know how effective they might actually be.
.
qucharski said:
Hi how can i turn only lte mode on my unbranded g900f? Ive been trying different codes for service menu none of them were working. Anyone knows?
Click to expand...
Click to collapse
LTE / 4G isn't always available so you would actually be without a data connection when it drops out of range, be it for bandwidth restrictions on the network side or simply bad coverage, dropping down to a heightened H+ or even 3G would mean a consistent connection instead of actually just losing your network.
Not a great idea i'm afraid.
Leaving it on a switch is the best method.
Imo it's also a bad idea, but if you really want to, there's an Xposed module. It's only for the G900F though.
I cant see LTE in my mobile networks mode in G900FD
it has only:
WCDMA/GSM (auto connect)
WCDMA only
GSM only
can anybody help me to turn my LTE on ?
rmn3432 said:
I cant see LTE in my mobile networks mode in G900FD
it has only:
WCDMA/GSM (auto connect)
WCDMA only
GSM only
can anybody help me to turn my LTE on ?
Click to expand...
Click to collapse
Well if your APN settings are allright you either have no LTE coverage or it isn`t available at your provider. LTE should be activated automaticaly if available.
gee2012 said:
Well if your APN settings are allright you either have no LTE coverage or it isn`t available at your provider. LTE should be activated automaticaly if available.
Click to expand...
Click to collapse
my APN setting is right and i am in LTE coverage (my galaxy s3 9305 has LTE/WCDMA/GSM mode and connect to LTE network) but it has not any LTE in setting and i cant connect to LTE
I update to G900FDXXU1ANH2 to resolve this problem but it doesnt resolved
rmn3432 said:
my APN setting is right and i am in LTE coverage (my galaxy s3 9305 has LTE/WCDMA/GSM mode and connect to LTE network) but it has not any LTE in setting and i cant connect to LTE
I update to G900FDXXU1ANH2 to resolve this problem but it doesnt resolved
Click to expand...
Click to collapse
Better contact your provider. Does the G900FD support your providers LTE band/frequency? I would check that first.
gee2012 said:
Better contact your provider. Does the G900FD support your providers LTE band/frequency? I would check that first.
Click to expand...
Click to collapse
i think that i have to see LTE in networks if there is no sim card registered in the phone
am i right ?
rmn3432 said:
i think that i have to see LTE in networks if there is no sim card registered in the phone
am i right ?
Click to expand...
Click to collapse
That would be impossible as you cannot connect to the network without a simcard
gee2012 said:
That would be impossible as you cannot connect to the network without a simcard
Click to expand...
Click to collapse
and i cant go to networks too
rmn3432 said:
and i cant go to networks too
Click to expand...
Click to collapse
I`am starting to think that the G900FD supports different LTE bands then the G900F because it is build for a different region. Its mainly sold in the far east as i can see so far. Better Google to find the specs and the phones supported LTE bands. You may not be able to get LTE with your device i`am afraid. Good luck mate.
gee2012 said:
I`am starting to think that the G900FD supports different LTE bands then the G900F because it is build for a different region. Its mainly sold in the far east as i can see so far. Better Google to find the specs and the phones supported LTE bands. You may not be able to get LTE with your device i`am afraid. Good luck mate.
Click to expand...
Click to collapse
you are right
i have to check frequency bands in my phone becuse i buy this phone from UAE and i dont know that LTE bands are the same as my operators lte frequency bands
You should see LTE on sim2 only. Not Sim 1 .
rmn3432 said:
you are right
i have to check frequency bands in my phone becuse i buy this phone from UAE and i dont know that LTE bands are the same as my operators lte frequency bands
Click to expand...
Click to collapse
i am planning to buy this phone, can anybody share the supported LTE bands or networks where LTE has been used successfully
Similar problem with me, could anybody share some insight
Hi guys
I also had the issue of LTE not being selectable on my S5 Duos - here's my experiences.
Firstly I tried putting another carriers SIM into the phone, and noticed that LTE -was- selectable, but upon putting my own SIM back in, it again wasn't. HOWEVER - after putting my own SIM back in after using LTE on the other SIM, the phone automatically connected to LTE/4G even though WCDMA (auto) was selected! Very odd.
To permanently fix this here was my method -
My phone was shipped with ANF7 firmware, which was patched to overcome the kernel vulnerability Towelroot uses to gain root. I flashed my phone with ODIN back to ANF6 firmware, applied towelroot V3, then installed root browser and edited the system file data >property>persist.radio.lteon and changed the value from false to true, and rebooted the phone. LTE is now selectable!
:EDIT: Upgrading again to ANF7 broke the selection, but it still connected to LTE automatically... So odd.
rmn3432 said:
I cant see LTE in my mobile networks mode in G900FD
it has only:
WCDMA/GSM (auto connect)
WCDMA only
GSM only
can anybody help me to turn my LTE on ?
Click to expand...
Click to collapse
Hi,
I had the same issue as yours. You can either fix it by a method explained here at XDA and it involves rooting the device. However I fixed my issue by flashing the latest firmware "G900FDXXU1ANJ2" for the month of November via Odin and now I can see the LTE/WCDMA/GSM option on sim 1. Hope this helps
At work the 4g LTE signal for ATT is very poor in the building, but we have 4g repeaters for ATT to fix this issue. Unfortunately, phones are stubborn and like to stay on 4g LTE despite having 1 bar of signal vs full signal with 4g. I had this same issue on my iphone 5 but was able to easily force off LTE while i was at work and have a steady, reliable data connection. My Note 4 seems to have the same affinity to wanting to be on 1 bar of LTE, but I cannot figure out a way to toggle / force LTE off and just use 4g. Anyone have any ideas? Anyone know of an application I can use to resolve this issue?
Thanks
try settings...more networks...mobile networks....network mode....It should be in there..I have the sprint model so I don't know for sure...but that is where mine is....hope this helps
djboo4you said:
try settings...more networks...mobile networks....network mode....It should be in there..I have the sprint model so I don't know for sure...but that is where mine is....hope this helps
Click to expand...
Click to collapse
Unfortunately, there is no option for Network mode on the ATT version. I wonder if this has to do with voLTE....
I did find a backway to the network mode via *#*#4636#*#* but I am unsure of what I should be setting to "disable" lte while I'm in the building at work.
I think I've sorted this out now. If I change LTE/GSM AUTO to WCDMA preferred it seems to immediately switch and hold onto 4G. I do have to change it back. Maybe I will write something so I can quick toggle this since nothing on the app store seems to work.
hi,
If you are rooted ? You can use an xpose module called Intelli3G
I use it on my phone ,works 100% and switches smoothly/fast between eg 4G..3G automatic
eg if my data is of its on 3G as soon as i switch data on /wifi it changes to 4 G
For interest sake ,here is a link to market ,you can read desciption what it does ?
https://play.google.com/store/apps/details?id=com.voidvapps.intelli3g&hl=en
good luck
Hello,
I am trying to check how i can have the phone force all bands and not just LTE only. My phone after i unlocked it works great on t-mobile, However, i have to always go back
and change the radio to TDSCDMA/GSM/WCDMA etc so i can get LTE and voice. It defaults to LTE only. Anyone know how to clear this or force on one band ?
Thanks
saadkhan07 said:
Hello,
I am trying to check how i can have the phone force all bands and not just LTE only. My phone after i unlocked it works great on t-mobile, However, i have to always go back
and change the radio to TDSCDMA/GSM/WCDMA etc so i can get LTE and voice. It defaults to LTE only. Anyone know how to clear this or force on one band ?
Thanks
Click to expand...
Click to collapse
if you are rooted download http injector and select radios option from dropdown menu select auto/ all bands option
Verizon variant is not rootable.