Kezedy said:
Hello xda users,
today i changed from customrom (cm12 nightly) to stock GNG2 rom on my SM-N9005, because the Official Lollipop Samsung Update release is near.
I started in TWRP with fullwipe and reinstalled GNG2 with pid-file & Nand erase all. After Stock booted up, my modem did not work as usual.
i decided to reflash the correct modem and only fixed sound etc, but not the mobile network. I tried restoring EFS partition in twrp and booted stock again, but nothing changed.
Now i flashed cm12 over twrp again, because i thinked it might be a bootloader issue caused by android 5. Also restored EFS after flashing cm12, but the simcard dont work. (yes i know how to put in a simcard correctly)
The EFS is also a correct backup from my phone. I had this issue 6 months ago and fixed it by releasing the batterie for an evening.
Anyone knows how to fix this?
Thanks, Kezedy
Click to expand...
Click to collapse
//EDIT
For all those who have the same Problem like i had, just flash this modem, which is a newer one then the GNG2 Modem.
Use CP-modem-XXUGNH1 from Androidfilehost
//CLOSE
Kezedy said:
//EDIT
For all those who have the same Problem like i had, just flash this modem, which is a newer one then the GNG2 Modem.
Use CP-modem-XXUGNH1 from Androidfilehost
//CLOSE
Click to expand...
Click to collapse
what firmware you use to flash the modem's?
Already flashed both modems and still baseband unknown... =(
iakson said:
Already flashed both modems and still baseband unknown... =(
Click to expand...
Click to collapse
Flash full stock firmware for your device.
What they said.....
Flash the latest stock rom for your region - I mistakenly flashed the wrong one supposedly for the UK and had no network/unknown baseband/no imei! Found the correct one, flashed with odin and it fixed it asap
renandstimpeygti said:
What they said.....
Flash the latest stock rom for your region - I mistakenly flashed the wrong one supposedly for the UK and had no network/unknown baseband/no imei! Found the correct one, flashed with odin and it fixed it asap
Click to expand...
Click to collapse
i dont known what region my NOTE 3 is, my box is translate in FRENCH, but already try all FRANCE firmware and still no LUCK .. before that already try more that 30 firmware's, and still no luck too..
---------- Post added at 01:09 PM ---------- Previous post was at 01:04 PM ----------
vndnguyen said:
Flash full stock firmware for your device.
Click to expand...
Click to collapse
already try FULL FLASH .. FULL STOCK firmware ... no luck
iakson said:
Already flashed both modems and still baseband unknown... =(
Click to expand...
Click to collapse
I wiped the whole phone with TWRP. DONT NAND ERASE ALL in Odin3!
Then i flashed the latest original stock firmware (GNG2) over Odin3 in Downloadmode.
You also need to hardreset after flashing! Then do your first boot. S´hutdown phone and flash the latest Modem via Odin3 in Downloadmode.
That is how it worked for me finally.
iakson said:
i dont known what region my NOTE 3 is, my box is translate in FRENCH, but already try all FRANCE firmware and still no LUCK .. before that already try more that 30 firmware's, and still no luck too..
Click to expand...
Click to collapse
Use Phone INFO ★Samsung★ app and look for the "Original CSC Code" in the CSC INFO section.
.
vndnguyen said:
Use Phone INFO ★Samsung★ app and look for the "Original CSC Code" in the CSC INFO section.
.
Click to expand...
Click to collapse
Original CSC show in RECOVERY is : TMB
its possible it is a N900T, instead a N9005 as wrote in his backside ?
iakson said:
Original CSC show in RECOVERY is : TMB
its possible it is a N900T, instead a N9005 as wrote in his backside ?
Click to expand...
Click to collapse
Can you post (or PM me) all screenshots from the Phone INFO ★Samsung★ app, and also a hi-res picture of the Back Sticker.
I will try to tell you what is your original model and CSC.
vndnguyen said:
Can you post (or PM me) all screenshots from the Phone INFO ★Samsung★ app, and also a hi-res picture of the Back Sticker.
I will try to tell you what is your original model and CSC.
Click to expand...
Click to collapse
Here.. the prints..
iakson said:
Original CSC show in RECOVERY is : TMB
its possible it is a N900T, instead a N9005 as wrote in his backside ?
Click to expand...
Click to collapse
Yes, according to the info show in Recovery and also the info in the Phone INFO ★Samsung★, your phone should be N900T, not N9005. Please also note that the Back Sticker in your phone is FAKE, not a original one.
However you have flashed it with another rom/firmware, so now it is not necessary to flash back to its original firmware.
You can flash with a TMB firmware for N900T, or also flash with a stock firmware for N9005.
But don't forget to flash with a appropriate PIT file (with Re-Partition option selected).
vndnguyen said:
Yes, according to the info show in Recovery and also the info in the Phone INFO ★Samsung★, your phone should be N900T, not N9005. Please also note that the Back Sticker in your phone is FAKE, not a original one.
However you have flashed it with another rom/firmware, so now it is not necessary to flash back to its original firmware.
You can flash with a TMB firmware for N900T, or also flash with a stock firmware for N9005.
But don't forget to flash with a appropriate PIT file (with Re-Partition option selected).
Click to expand...
Click to collapse
When i try FULL FLASH N900T firmware with pit file
show in the phone ...
Maybe try a STOCK firmware?
iakson said:
When i try FULL FLASH N900T firmware with pit file
show in the phone ...
Maybe try a STOCK firmware?
Click to expand...
Click to collapse
Your PIT file it's for N9005?
On Odin v3.09 or 3.10 you can try flash the Modem in this way
Put modem file on CP
download PERSIST file (on attachement) and put on AP
and put your PIT file on PIT
check the box RE-Repartition
It work fine for me :fingers-crossed:
Yes please make sure you are using the correct PIT file.
Your PIT file it's for N9005?
On Odin v3.09 or 3.10 you can try flash the Modem in this way
Put modem file on CP
download PERSIST file (on attachement) and put on AP
and put your PIT file on PIT
check the box RE-Repartition
It work fine for me
Click to expand...
Click to collapse
Warning!! On picture I read GT-N9005 it's not a SM-N9005 (galaxy note 3 hlte)
Your phone is a copy of galaxy note 3 :/
my method will be not work for this phone sorry for my english :3
vndnguyen said:
Yes, according to the info show in Recovery and also the info in the Phone INFO ★Samsung★, your phone should be N900T, not N9005. Please also note that the Back Sticker in your phone is FAKE, not a original one.
However you have flashed it with another rom/firmware, so now it is not necessary to flash back to its original firmware.
You can flash with a TMB firmware for N900T, or also flash with a stock firmware for N9005.
But don't forget to flash with a appropriate PIT file (with Re-Partition option selected).
Click to expand...
Click to collapse
how do you know its N900. I am also facing same issue on my N9500 and my CSC is TYG(HOng kong) and now cannot use sim and unknown imei and baseband.
Really need some help.
mrsaya said:
how do you know its N900. I am also facing same issue on my N9500 and my CSC is TYG(HOng kong) and now cannot use sim and unknown imei and baseband.
Really need some help.
Click to expand...
Click to collapse
okay I'll explain you
behind the battery there is a label that reads the version of your device
if GT-N90.... I think this is a copy of the note 3 I'm not sure
For me the official note 3 begins by SM-N90 ... (for exemple SM-N9005 or SM-N900T)
if the model of your device is not SM-N9 ... do not flashed rom Note 3 SM-N9.. you can brick your device
after you find the model of your device
seeking the appropriate modem or rom in preference for your region
and if possible the PIT file version your phone
when you have found all his said we
Bruno saa said:
okay I'll explain you
behind the battery there is a label that reads the version of your device
if GT-N90.... I think this is a copy of the note 3 I'm not sure
For me the official note 3 begins by SM-N90 ... (for exemple SM-N9005 or SM-N900T)
if the model of your device is not SM-N9 ... do not flashed rom Note 3 SM-N9.. you can brick your device
after you find the model of your device
seeking the appropriate modem or rom in preference for your region
and if possible the PIT file version your phone
when you have found all his said we
Click to expand...
Click to collapse
at the back it says SM- N9005 and i have tried flashing TGY firmware also. but still same problem. Is there possibility of the device is not N9005 and some other note model? because i have checked antutu benchmarks and harware info and all says N9005.
mrsaya said:
at the back it says SM- N9005 and i have tried flashing TGY firmware also. but still same problem. Is there possibility of the device is not N9005 and some other note model? because i have checked antutu benchmarks and harware info and all says N9005.
Click to expand...
Click to collapse
I have told you that the IMEI Sticker on your phone is a FAKE. So you cannot rely on it.
Related
hey guys,
i tried the new rom by civato, for this i flashed the NE6 bootloader. the rom didn't work as expected (no data) so i tried to restore the stock rom NB7 via odin.
odin said succes, but the phone did not boot. i flashed cwm and flashed som roms from there, but i always got a freeze/bootloop, even after factory reset.
so i tried a full new flash with nand erase all. flash succeded, but i could not boot.
then i downloaded the N9005ZHUENE6 firmware from hongkong and tried to flash it, but odin always fails. now i get the "firmware upgrade encountered an issue." message and can't do anything with the phone anymore.
Can you please help me?
thank you in advance!
edit: problem solved, the NE4 pit file from sajjjjjjad did the job!
uluf said:
hey guys,
i tried the new rom by civato, for this i flashed the NE6 bootloader. the rom didn't work as expected (no data) so i tried to restore the stock rom NB7 via odin.
odin said succes, but the phone did not boot. i flashed cwm and flashed som roms from there, but i always got a freeze/bootloop, even after factory reset.
so i tried a full new flash with nand erase all. flash succeded, but i could not boot.
then i downloaded the N9005ZHUENE6 firmware from hongkong and tried to flash it, but odin always fails. now i get the "firmware upgrade encountered an issue." message and can't do anything with the phone anymore.
Can you please help me?
thank you in advance!
Click to expand...
Click to collapse
Head over to the HK thread(s) and see how to restore back to normal with Hong Kong variants it's a little different (you do have a HK version I assume? and not just risked an HK FW flash?)--- You can flash via ODIN again even with that error on the device.
radicalisto said:
Head over to the HK thread(s) and see how to restore back to normal with Hong Kong variants it's a little different (you do have a HK version I assume? and not just risked an HK FW flash?)--- You can flash via ODIN again even with that error on the device.
Click to expand...
Click to collapse
Is there a difference between the international N9005 and the HK variant? my N9005 is from germany. i flashed the german firmware again and the error is gone, but the device is still in the bootloop..
uluf said:
Is there a difference between the international N9005 and the HK variant? my N9005 is from germany. i flashed the german firmware again and the error is gone, but the device is still in the bootloop..
Click to expand...
Click to collapse
Very slightly yes. More to do with some HK Software issues, that's the only N9005 firmware which shouldn't/can't be flashed on every device model N9005 - regarding your bootlooping.
Grab a PIT file, sort out what firmware you use and match them, then flash via Odin, there are a few guides and it's pretty straightforward, however you need to read properly or you risk a hard-brick.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
radicalisto said:
Very slightly yes. More to do with some HK Software issues, that's the only N9005 firmware which shouldn't/can't be flashed on every device model N9005 - regarding your bootlooping.
Grab a PIT file, sort out what firmware you use and match them, then flash via Odin, there are a few guides and it's pretty straightforward, however you need to read properly or you risk a hard-brick.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I flashed the latest DBT firmware a couple of times, with a PIT file and without, with full nand erase and without. Odin always says passed but i get no boot sound and the device gets stuck at the boot animation.
I think the problem could be the NE6 bootloader i flashed, but if i flash the NE6 again after i flashed the NB7 firmware it doesn't boot either. Is it possible to downgrade the bootloader to another KitKat firmware?
uluf said:
I flashed the latest DBT firmware a couple of times, with a PIT file and without, with full nand erase and without. Odin always says passed but i get no boot sound and the device gets stuck at the boot animation.
I think the problem could be the NE6 bootloader i flashed, but if i flash the NE6 again after i flashed the NB7 firmware it doesn't boot either. Is it possible to downgrade the bootloader to another KitKat firmware?
Click to expand...
Click to collapse
try flashing the latest NE5 for the phillipines, that is for your model with correct pit file and i think your phone will be alive again
alom5 said:
try flashing the latest NE5 for the phillipines, that is for your model with correct pit file and i think your phone will be alive again
Click to expand...
Click to collapse
thanks for the tip, do you have a source for the NE5? i can't find a download for this.
You can use www.sammobile.com/firmwares.
Make sure you have the correct pit file as you changed it to the hk version before
Sent from my SM-N9005 using Tapatalk
on this site i can't find a NE5 version. i flashed the ND6, device didn't boot.
so i tried to flash cwm, worked fine. then i was able to install and boot the latest cm11, but the baseband, min, prl-version, meid, imei and iccid are shown as unknown. so i tried to restore the efs backup i made via terminal emulator, it looks like it worked but when i reboot nothing changed.
any other ideas?
alom5 said:
try flashing the latest NE5 for the phillipines, that is for your model with correct pit file and i think your phone will be alive again
Click to expand...
Click to collapse
Sorry for bursting here >>> and Just to make sure
If I'm on the N9005XXUEND6 ( btw the best Firmware so far).....the new Hong Kong PDA: N9005ZHUENE6
is not 100% safe/compatible ?
My phone is the international version
:good:
hi
i have this problem too!(Downgrade baseband)
http://forum.xda-developers.com/showthread.php?p=53111058
when i downgrade to nd4 imei set to null null and ....
Hong Kong ROM is Only for 16gb N9005 !!!!!!!
you'r bootloader upgpraded to NE6 and You most downgrade to ne4
i export pit file from ne4:
https://mega.co.nz/#!T4YgnaYL!-FBDWMpBpTUWCmYDpGfBqaM26ZH9HK_u7SuRB3xoF0Q
try to flash 4 file rom ne4 with my pit file.
Hong Kong firmware is not for the international version. Hk phone is 16gb only and had different partition. So don't bother with it.
There is the NE5 firmware on sammobile site. I downloaded it from there. ..
Is pda NE4 csc NE5
Sent from my SM-N9005 using Tapatalk
sajjjjjjad said:
hi
i have this problem too!(Downgrade baseband)
http://forum.xda-developers.com/showthread.php?p=53111058
when i downgrade to nd4 imei set to null null and ....
Hong Kong ROM is Only for 16gb N9005 !!!!!!!
you'r bootloader upgpraded to NE6 and You most downgrade to ne4
i export pit file from ne4:
https://mega.co.nz/#!T4YgnaYL!-FBDWMpBpTUWCmYDpGfBqaM26ZH9HK_u7SuRB3xoF0Q
try to flash 4 file rom ne4 with my pit file.
Click to expand...
Click to collapse
thanks for the pit file, i'm downloading the NE4 right now, but as a one file version. do you know where i can get the 4 file rom? i only find the 1 file versions.
THANK YOU! with your pit file, it worked again!
http://forum.xda-developers.com/showthread.php?t=2774970
hey guys i think that i had the same problem with you . i updated my bootloader and my modem as civato said and now imei null and baseband unknown . can you help me how to fix this . thanx in advance
Ι fixed it too
Misterjunky said:
If your baseband is NB4/ND4/NE6 then you cannot downgrade however you can
upgrade if when any updates are available.
Good luck!
Click to expand...
Click to collapse
upgrade if when any updates are available.
Why can't I flash a stock rom from a different country? Odin says "FAIL! Size".
Hey guys,
Got a G900I from Taiwan. I live in Australia. I went to www.sammobile.com and downloaded the latest unbranded Australia rom. Went to flash it with Odin. Odin got about 95% through then failed saying "FAIL! Size".
Any idea what the issue is? I the successfully flashed the latest Taiwan rom with no issues. I can deal with using the Taiwan rom, I'm just more curious what the issue is from a learning stand point. I never had any problems like this with my S3 and flashing other country's roms.
Ta.
taboo_ said:
Hey guys,
Got a G900I from Taiwan. I live in Australia. I went to www.sammobile.com and downloaded the latest unbranded Australia rom. Went to flash it with Odin. Odin got about 95% through then failed saying "FAIL! Size".
Any idea what the issue is? I the successfully flashed the latest Taiwan rom with no issues. I can deal with using the Taiwan rom, I'm just more curious what the issue is from a learning stand point. I never had any problems like this with my S3 and flashing other country's roms.
Ta.
Click to expand...
Click to collapse
On Galaxy Note 3, Taiwan and Hong Kong devices are NOT compatible with other stock firmwares. It is due to they have different PIT files.
So it may also be the case with the S5.
Can you show your Original CSC and Active CSC? (using Phone INFO ★Samsung★ app)
vndnguyen said:
Can you show your Original CSC and Active CSC? (using Phone INFO ★Samsung★ app)
Click to expand...
Click to collapse
Admittedly I'm not sure what this means, but both original and active claim to be "BRI".
taboo_ said:
Admittedly I'm not sure what this means, but both original and active claim to be "BRI".
Click to expand...
Click to collapse
Ok, BRI is for Taiwan.
In order to flash unbrand firmware on your phone, you should have PIT file from that firmware, and flash this PIT file together with the firmware via Odin.
vndnguyen said:
Ok, BRI is for Taiwan.
In order to flash unbrand firmware on your phone, you should have PIT file from that firmware, and flash this PIT file together with the firmware via Odin.
Click to expand...
Click to collapse
Thanks. I can do some research from here. But seeing as you've been a great help, do you know if there is a good website for archiving PIT files?
(PS. Not sure what the guy above this comment is asking or why it's relevant to this convo =/)
taboo_ said:
Thanks. I can do some research from here. But seeing as you've been a great help, do you know if there is a good website for archiving PIT files?
(PS. Not sure what the guy above this comment is asking or why it's relevant to this convo =/)
Click to expand...
Click to collapse
You can ask someone who owns S5 in this forum for help. It needs root to extract the PIT file.
in order to extract the PIT file, install Terminal Emulator and enter the following commands:
Code:
su
dd if=/dev/block/mmcblk0 of=/sdcard/S5.pit bs=8 count=580 skip=2176
Then copy the S5.pit file on the sdcard.
BTW, can you upload your PIT file from your own Taiwan S5?
Sure. Here ya go.
https://mega.co.nz/#!lk8zgDZa!5NFh1jKSUXAMWoiuNPxzssrWI7C5On1nqYqh3IY3_7c
taboo_ said:
Sure. Here ya go.
https://mega.co.nz/#!lk8zgDZa!5NFh1jKSUXAMWoiuNPxzssrWI7C5On1nqYqh3IY3_7c
Click to expand...
Click to collapse
Thanks.
If you do have PIT file from another (international) S5, please send me so I will compare partition structures to see if any difference.
I have buy in Austria a Note 4 910F with Open Firmware. I have flash many custom roms and i will back to stock but this not work. I have download the latest ATO Firmware but i get a ext4 error in Odin and too big size error. Thene i have download a open germany firmware but with the same probleme. Is there a open Europe firmware?
Schrotty35 said:
I have buy in Austria a Note 4 910F with Open Firmware. I have flash many custom roms and i will back to stock but this not work. I have download the latest ATO Firmware but i get a ext4 error in Odin and too big size error. Thene i have download a open germany firmware but with the same probleme. Is there a open Europe firmware?
Click to expand...
Click to collapse
I had the same problem with my note 3, I just reflashed it and it worked like a charm...try downloading the latest firmware from sammobile, there is one unbranded from France which was released in January 2015 and try flashing it again...also try doing a complete wipe before flashing anything
You also have the Nordic open.
Sent by a mobile gadget...
Make a firmware repair from Kies settings and will be able to get the latest version of your phone.
Kies repair not work on root phone. Only Odin.
Start kies repair without phone on. Just enter model and serial number
mariosraptor said:
Start kies repair without phone on. Just enter model and serial number
Click to expand...
Click to collapse
Not work. I enter SM-910F / 910F but nothing found.
this is nothing but a new headache introduced by samsung, even if you have the same soc you cant flash rom from different regions. One solution to this is to use the pit file along with the regional rom which we are about to flash. Unfortunately we dont have any dedicated thread for pit file collection.
Schrotty35 said:
Not work. I enter SM-910F / 910F but nothing found.
Click to expand...
Click to collapse
I think it should be SM-N910F
schrotty35 said:
not work. I enter sm-910f / 910f but nothing found.
Click to expand...
Click to collapse
you have to write like it is written on the imei sticker.
Capitals and exactly like it is.
Sm-910f
bala_gamer said:
this is nothing but a new headache introduced by samsung, even if you have the same soc you cant flash rom from different regions. One solution to this is to use the pit file along with the regional rom which we are about to flash. Unfortunately we dont have any dedicated thread for pit file collection.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2911989
The pit file in this thread worked for me so I could flash again after that annoying size error when flashing
Skickat från min iPhone med Tapatalk
The pit file have help you? How have you install this with Odin (which settings)?
Schrotty35 said:
The pit file have help you? How have you install this with Odin (which settings)?
Click to expand...
Click to collapse
The standard Odin options and then choose the pit and check re-partition and and erase nand I think it is called. Dont have Odin befor me now but it should be named something like that. But be aware that flashing with a pit can be dangerous! Your phone can be seriously bricked so be careful!
Schrotty35 said:
I have buy in Austria a Note 4 910F with Open Firmware. I have flash many custom roms and i will back to stock but this not work. I have download the latest ATO Firmware but i get a ext4 error in Odin and too big size error. Thene i have download a open germany firmware but with the same probleme. Is there a open Europe firmware?
Click to expand...
Click to collapse
I remember i got a similar issue with my SP GS5 with KK FWs, it was partition size not matching in my case, i didn't manage to find the the proper FW, but i found a workaround by removing the not matching partition file from the FW (it was the preload/HIDDEN image), repacked the FW and flashed it through Odin.
Hi all, just updated the Samsung Galaxy Note 4 to CyanogenMod 5.1.1 ROM. Phone doesn't recognize SIM card (I live in UK) anymore, baseband is showing as "unknown" under the About Phone section. Please can someone let me know where I can download the Baseband/Modem firmware for SM-N910F?
Many thanks!
You could attempt to download the full stock firmware by either using 'Samfirm' or the website 'Sammobile'
Unbranded Note 4 CSC is BTU but it is currently still on Android 5.0.1 but the modem and bootloader will still work fine with Cyanogenmod ROMs.
Right, I did download the official Samsung firmware N910FXXU1BOC5 from a website, but when flashing with Odin 3.09 I was getting a error. So I ended up using the customized ROM which didn't seem to have the baseband/model inside. How could I extract the baseband from the official firmware in MD5 format?
kevin.jiang said:
Right, I did download the official Samsung firmware N910FXXU1BOC5 from a website, but when flashing with Odin 3.09 I was getting a error. So I ended up using the customized ROM which didn't seem to have the baseband/model inside. How could I extract the baseband from the official firmware in MD5 format?
Click to expand...
Click to collapse
Bootloader
Modem
Put your phone in download mode manually (Pull the battery out and put it back in after 10 seconds and then hold volume down + Home button and power on the device) Then connect it to your PC and run Odin as Admin and flash the bootloader and modem.
Make sure you uninstall Kies if you have it installed.
Battlehero said:
Bootloader
Modem
Put your phone in download mode manually (Pull the battery out and put it back in after 10 seconds and then hold volume down + Home button and power on the device) Then connect it to your PC and run Odin as Admin and flash the bootloader and modem.
Make sure you uninstall Kies if you have it installed.
Click to expand...
Click to collapse
Hi mate,
I have a quick question with which I hope you can help (if you have the time of course ). There is a newer firmware version for UK, which is COK3 (and O2, which is what I have), and I'd like to update to this one, but the only way I know would be to update the phone entirely and then root it again and install whatever mod rom I'm using from there. However, this would be a painful lot of work. Do you know (or mind sharing) how to extract the baseband from an official md5 release so as to update this only or as well as the bootloader? Is there any way to put the entire firmware md5 file on Odin and tell the software to update just one thing?
I saw that you did just that above and I'm having some trouble with the phone connection being lost quite often, so it would be of great help.
Many thanks in advance for your help mate!
Cheers
paieneso said:
Hi mate,
I have a quick question with which I hope you can help (if you have the time of course ). There is a newer firmware version for UK, which is COK3 (and O2, which is what I have), and I'd like to update to this one, but the only way I know would be to update the phone entirely and then root it again and install whatever mod rom I'm using from there. However, this would be a painful lot of work. Do you know (or mind sharing) how to extract the baseband from an official md5 release so as to update this only or as well as the bootloader? Is there any way to put the entire firmware md5 file on Odin and tell the software to update just one thing?
I saw that you did just that above and I'm having some trouble with the phone connection being lost quite often, so it would be of great help.
Many thanks in advance for your help mate!
Cheers
Click to expand...
Click to collapse
You can check my signature for the latest modems and bootloaders.
Tutorial:
http://forum.xda-developers.com/galaxy-s3/general/guide-extract-bootloader-make-flashable-t2864264
Battlehero said:
You can check my signature for the latest modems and bootloaders.
Tutorial:
http://forum.xda-developers.com/galaxy-s3/general/guide-extract-bootloader-make-flashable-t2864264
Click to expand...
Click to collapse
Thanks for the quick response mate! You are the man! I still have a couple of questions though. Firstly, what's the difference between the cp and bl files in the link in your signature? I take it that bl stands for bootloader, but not sure of what cp stands for then. In any case, the most important bit I need/want is the baseband, and since I'm in the UK and my network carrier is O2, I believe the XXU1COK3 (as per Sammobile) would be my best bet, is that right? Will it make much of a difference with the XXU1COJ3 that I have installed right now? In any case, is the bl-cok3.tar file in your link the same XXI1COK3 baseband?
Secondly, that other post that you included is for a galaxy s3 and within that topic they link to a galaxy s4 topic, will those files and guidelines also work for our note 4?
Finally, I have TWRP recovery and within advanced backup I can individually backup the boot (which I imagine is the bootloader) and the modem (which I suppose is the baseband as such). Do you know if I could I install a new firmware through Odin and, backup the modem and boot, and then restore everything but those two things from an different rom backup? Have you ever tried?
Thank you for your time bro! I know that these might be a little bit of a newbie's questions but for more thar I search, I can't find anything close enough to answer what I'm asking.
paieneso said:
Thanks for the quick response mate! You are the man! I still have a couple of questions though. Firstly, what's the difference between the cp and bl files in the link in your signature? I take it that bl stands for bootloader, but not sure of what cp stands for then. In any case, the most important bit I need/want is the baseband, and since I'm in the UK and my network carrier is O2, I believe the XXU1COK3 (as per Sammobile) would be my best bet, is that right? Will it make much of a difference with the XXU1COJ3 that I have installed right now? In any case, is the bl-cok3.tar file in your link the same XXI1COK3 baseband?
Secondly, that other post that you included is for a galaxy s3 and within that topic they link to a galaxy s4 topic, will those files and guidelines also work for our note 4?
Finally, I have TWRP recovery and within advanced backup I can individually backup the boot (which I imagine is the bootloader) and the modem (which I suppose is the baseband as such). Do you know if I could I install a new firmware through Odin and, backup the modem and boot, and then restore everything but those two things from an different rom backup? Have you ever tried?
Thank you for your time bro! I know that these might be a little bit of a newbie's questions but for more thar I search, I can't find anything close enough to answer what I'm asking.
Click to expand...
Click to collapse
In the bootloader and modem folders I have included the latest Odin, if you use that the 'CP' and 'BL' will make sense.
CP= Modem
BL=Bootloader
The steps should still work for the Note4.
I don't back-up and restore bootloaders or modems using TWRP.
Battlehero said:
In the bootloader and modem folders I have included the latest Odin, if you use that the 'CP' and 'BL' will make sense.
CP= Modem
BL=Bootloader
The steps should still work for the Note4.
I don't back-up and restore bootloaders or modems using TWRP.
Click to expand...
Click to collapse
Aah OK, that makes sense. But then the modem I am talking about is not in that list, is it? However, the bootloader is I think. Is there any chance you could extract the xxu1cok3 modem for the UK and O2 to add it to your list? ?? Pretty sure other people would appreciate it too, I know I would :good:
paieneso said:
Aah OK, that makes sense. But then the modem I am talking about is not in that list, is it? However, the bootloader is I think. Is there any chance you could extract the xxu1cok3 modem for the UK and O2 to add it to your list? ?? Pretty sure other people would appreciate it too, I know I would :good:
Click to expand...
Click to collapse
The modem isn't COK3, only the bootloader was.
The modem was COJ3.
Battlehero said:
The modem isn't COK3, only the bootloader was.
The modem was COJ3.
Click to expand...
Click to collapse
Yep, that's what I thought. And the coj3 is the modem I have now (not working so well ). As I said, Any chance you could extract the cok3 modem from the full firmware to add it to your list?
Thanks in any case mate!
paieneso said:
Yep, that's what I thought. And the coj3 is the modem I have now (not working so well ). As I said, Any chance you could extract the cok3 modem from the full firmware to add it to your list?
Thanks in any case mate!
Click to expand...
Click to collapse
I don't see a point in doing that, it won't make a difference. The firmware does not have a 'COK3' modem. So I can't extract it if it doesn't exist. The O2U firmware had a bootloader of COK3, CSC of COJ1 and modem of COJ3.
If the modem isn't working well then you should flash a stock firmware for your region and apply the appropriate CSC.
Battlehero said:
I don't see a point in doing that, it won't make a difference. The firmware does not have a 'COK3' modem. So I can't extract it if it doesn't exist. The O2U firmware had a bootloader of COK3, CSC of COJ1 and modem of COJ3.
If the modem isn't working well then you should flash a stock firmware for your region and apply the appropriate CSC.
Click to expand...
Click to collapse
Oooooouuuch! Sorry mate, my bad, I must ve read it wrong and only seen what i wanted to see. I was convinced I saw that that firmware release came with modem too.
In any event, thanks mate as you saved me a lot of time wasting with that last attachment
i have major problem that after installing phronesis rom 6.0.1 in boot animaion it gets struck and get heated then i immediately change to norma rom 5.1.1 v29 rom after that my carrier signal goes to noservice or emergency calls only in home also when i call or use ussd codes it says not registered on network but when i go outside it works good...can someone please help me i am very worried about my phone
note: i change it to another carrier sim but problem still remains....
Does the phone show the correct imei when you dial *#06#? Have you tried flashing a stock rom?
Yes it shows the imei number but i havent try stock rom
Please guide me how to install exact stock rom for my n9005dx and which version? first when i bought this phone it has n9005dx... something like that version installed as kitkat 4.4.2 i think i dont remember now so please guide me
Download the stock firmware for the phone from sammobile.com, unzip it, and flash it using Odin.
You flash a stock rom the same way you flash twrp with Odin.
audit13 said:
Download the stock firmware for the phone from sammobile.com, unzip it, and flash it using Odin.
You flash a stock rom the same way you flash twrp with Odin.
Click to expand...
Click to collapse
thanks for replying but how about kernel?????where can i find stock kernel to install or is it inside stock firmware???previously when i flash 5.0.1 lollipop stock rom which i downloaded from sammobile.com,wifi doesnt on or it gets blurry when i click on it..........
The kernel is inside the rom from sammobile.com.
Does the imei in the phone match the imei on the label below the battery?
Go settings/privacy&policy, untik diagostic data and reboot.....
dimitrisioak said:
Go settings/privacy&policy, untik diagostic data and reboot.....
Click to expand...
Click to collapse
I tried it but nothing happened
audit13 said:
The kernel is inside the rom from sammobile.com.
Does the imei in the phone match the imei on the label below the battery?
Click to expand...
Click to collapse
Yes imei is same
Did you flash a stock Rom and perform a factory reset from stick recovery?
audit13 said:
Did you flash a stock Rom and perform a factory reset from stick recovery?
Click to expand...
Click to collapse
No i wll do tonight i got kitkat 4.2.2 with n9005dxugune4 this firmware was installed when i bought the phone and i updated the bootloader and modem,if i install this firmware can i also change bootloader and modem to its stock one????
Flashing a stock rom from sammobile.com will update bootloader and modem.
From what carrier you have phone ?
nervous1301 said:
From what carrier you have phone ?
Click to expand...
Click to collapse
I have telenor carrier from pakistan
give me your model number (remove battery and it will be writed)
nervous1301 said:
give me your model number (remove battery and it will be writed)
Click to expand...
Click to collapse
i has SM-N9005 at the back of the phone
ok now i install KITKAT 4.4.2 stock rom and now there is no service and in ABOUT DEVICE option BASEBAND VERSION shows UNKNOWN........also when i go to mobile networks in settings is displays INSERT SIM,,,WHAT SHOULD I DO IT NOW I AM REALLY WORRIED
you will never have an signal because n9005 is not avaliable in your country... sorry... or your sim port is ****ed up
now i have nothing in imei and also serial number baseband version ..........it only shows UNKNOWN.....WHAT SHOULD I DO NOW??????
do you have back-up /efs partition ?