[Q] Brightness does not come back to full - Galaxy Note 3 Q&A, Help & Troubleshooting

Since I got this phone, I see this happening.
If I touch the screen immediately as the phone becomes dark after 30 secs of no interaction, the brightness increases but not to the full level.
This happens when auto and preset brightness.
Returns to full brightness if I tinker the brightness setting - eg. If I turn auto brightness on then off.
Anyone knows what's going on?

Do you have any xposed modules installed?
Sounds like 2 or more modules/apps are having a punch up

Related

screen / image burn imprint

hi , Does anyone know how resilient HD2 screens are to image burn in.
Is there a way to have the backlight go off rather than dimmed after a time on non use without disabling the auto screen brightness on normal use. I want to have the HD2 working (gps app) 24/7, and have had to untick switch off after a certain period of activity to keep it from switching off, but I cant find an option or hack to have the backlight off but the unit still operative other than to disable the auto brightness which I like and then manually turn it down. Its automatic dimming still leaves it unnecessarily bright with no one looking at it and I did think about image burn with extended periods even at 30 percent brightness. Thx folks.

Auto brightness only brightens, never dims

I noticed that the brightness only brightens but never dims back in automatic brightness display setting. I can reproduce this easy with turning the lamp on my desk on and off. It only goes back to the lower brightness if turning the screen off and on again.
Noticed this too but seems to only occur when I use a widget to toggle between Auto and 100%.
If I leave the setting in Auto from within settings then it seems to work. Brightness widgets seem to break the auto functionality.
Hmm, I don't use a brightness widget. The light of the softbuttons go on if I cover the light sensor, but the screens stays in high brightness.
Strahlenkanone said:
Hmm, I don't use a brightness widget. The light of the softbuttons go on if I cover the light sensor, but the screens stays in high brightness.
Click to expand...
Click to collapse
Must be an all around bug then. If you turn the Atrix off and back on then the auto brightness functionality is restored.
Strahlenkanone said:
I noticed that the brightness only brightens but never dims back in automatic brightness display setting. I can reproduce this easy with turning the lamp on my desk on and off. It only goes back to the lower brightness if turning the screen off and on again.
Click to expand...
Click to collapse
This must be an Android thing. My Atrix does the same thing, as did the Nexus One I had before. I've had several (high end) Nokia's that dimmed/brightened perfectly. After 5 seconds, they would brighten (or dim) accordingly. I was hoping Motorola was better at making phones than HTC (the KING of bad battery life). We ALL lose here. Our precious battery life is being drained by the poor execution of a simple function.
This is a stock android thing (problem). Custom ROMs can allow it to dim and change brightness smoothly rather than in discrete steps (Cyanogen).
That's what I thought. I found this free app called "esdimmer". It supposed to be for Galaxy phones, but it's somewhat working on my Atrix. Does this function work any better in Gingerbread?
Sent from my MB860 using XDA App
Well it's good to hear that it's a stock android problem and not the actual phone. I did find a way to get around this problem but it's very limited. You can get the screen to dim by first putting the phone into standby and then press the standby button once again (which gets you into the lock screen). You'll notice that the screen then dims (if coming from a well lit area/room to a darker one).

Alliance rom screen dimming issue

Running the Alliance rom, clean install on stock slot. No other major issues that I can think of. I've got it set to maximum brightness, not on auto dimmer. When the screen dims after 30 seconds or so, when its about to turn off due to inactivity, half the time when I tap the screen, it recovers to full brightness. The other half the time, it gets a little brighter than the dim mode, but not much. It stays way dimmer than the full brightness setting that I keep it on. I have to pull the notification bar down, slide the dimmer down, and back up to maximum, and I'm good to go until the next time it does it. Which could be in 30 seconds when it dims again.
Anybody else having this issue?
scott_65 said:
Running the Alliance rom, clean install on stock slot. No other major issues that I can think of. I've got it set to maximum brightness, not on auto dimmer. When the screen dims after 30 seconds or so, when its about to turn off due to inactivity, half the time when I tap the screen, it recovers to full brightness. The other half the time, it gets a little brighter than the dim mode, but not much. It stays way dimmer than the full brightness setting that I keep it on. I have to pull the notification bar down, slide the dimmer down, and back up to maximum, and I'm good to go until the next time it does it. Which could be in 30 seconds when it dims again.
Anybody else having this issue?
Click to expand...
Click to collapse
I have the same thing happening. Personally I have been too lazy about it to check through settings to see if I've done something. I'll check on it and see if I can find a fix.
*Update*
I've checked through all my settings and can find nothing that might cause it. I don't have Auto Brightness set, nor do I have Auto Adjust Screen Tone turned on. I saw nothing in the Alliance Settings either. I believe it is a system setting that is probably buried in code somewhere (far beyond my knowledge).
**Update** I reported the bug in the Alliance Forum.
I tend to agree. I've looked through settings, etc. just as you have, to no avail. I'm nearly certain it's done it since install, so I don't think it's something that I've changed. But I could be wrong. I've also tried it with auto adjust turned on, does the same thing. Auto adjusts to a dimmer setting sometimes

Anyway to turn off auto brightness for second screen?

It's too dark to use sometimes unless I lift it up, making it hard to see notifications quickly. (When main screen is off) When it's on auto, it gets too dark most of the time unless it has direct view of light. Any way to turn off auto brightness on it or make it brighter?

Auto-brightness still too low on 4.5.11

Hello guys, I installed 4.5.11, but auto-brightness is very agressive, many times i find it on the lowest setting. Any way to fix this? I just want it a bit higher.
Seems like Oneplus is having everything that saves battery on, from brightness to Doze. As some notifications didn't show untill i opened the app. Usually whatsapp. Personally, instead of 7h of screen on time, i prefer having "just" 6 and everything working good. Just got this phone, 6-7 hours of SOT on a 3300mah battery is insane!
This is very stupid. I have the same problem. I dont know why OnePlus don't make AutoBrightness ajustable like Samsung in Touchwiz for ex...
same with me, when autobrightness in darker room, display is always set to lowest brightness ever. really annoying.
On my side, I really love the way auto brightness behave on my OP5. Too much light is not good for the eyes.
Exactly, the user should be able to set a default level, then auto brightness goes from there.
For those who have sensitive eyes, you can always use night mode. It just block the blue light that is mostly responsible to keep is awake.
When the auto brightness is too low did you go into Settings / Display and move the Adaptive Brightness slider to your desired brightness? I am now in a very dark room and the slider isn't all the way down to the minimum. I can see my screen fine.
jhs39 said:
When the auto brightness is too low did you go into Settings / Display and move the Adaptive Brightness slider to your desired brightness? I am now in a very dark room and the slider isn't all the way down to the minimum. I can see my screen fine.
Click to expand...
Click to collapse
Yeah or i do it from the status bar. Still after a while it returns to a lower level. While i already want it on a low level, it's too agressive. I whish i could raise it by 10-20%.
Yeah, that slider doesn't adjust the adaptive brightness level like it would on a Nexus or Pixel device. It remains as a standard brightness level instead
Sent from my ONEPLUS A5000 using Tapatalk
Well, we could install xposed to fix the brightness. But then i don't know i want to install all of that just for brightness.

Categories

Resources