Deep clean s5 - Galaxy S 5 Q&A, Help & Troubleshooting

Hello. I am new here and sorry if i didn't post in a correct section maybe.
I need the "pit file" to do a deep clean of my s5 to restore original firmware that now is impossible to do with odin.
thx, really thx who ll help me.
at the moment i have lollipop made in Spain but i need it because i have some problems with my camera that is not possible to make it ok by using a normal hard reset.

82ispanico said:
Hello. I am new here and sorry if i didn't post in a correct section maybe.
I need the "pit file" to do a deep clean of my s5 to restore original firmware that now is impossible to do with odin.
thx, really thx who ll help me.
at the moment i have lollipop made in Spain but i need it because i have some problems with my camera that is not possible to make it ok by using a normal hard reset.
Click to expand...
Click to collapse
Here you go.
This is where I found it.

Related

[help]!!! Help the newbie here!!

Hi everyone, i encounter a problem earlier. Basically i rooted my phone days ago and i m still using stock rom without flashing custom roms. So i eager to try out the mod from Omega thread and install the Omega file from google play. After downloaded the mod (for omega rom) of scrolling wallpaper for TW and i flashed it. Booting up my phone with TW not responding, force close. Try again and again still cant boot into menu. I know i m stupid that didn't do a NAND backup before flashing it, and now i m stuck at this force close thing. So i found out out there there is a stock official rom XXUBMEA, i was previously from XXUAME2, can i flash this rom with odin?What is the complete process i need to do to flash this stock rom? Appreciate that you can help me so i can get back my phone!!
snoopy5 said:
Hi everyone, i encounter a problem earlier. Basically i rooted my phone days ago and i m still using stock rom without flashing custom roms. So i eager to try out the mod from Omega thread and install the Omega file from google play. After downloaded the mod (for omega rom) of scrolling wallpaper for TW and i flashed it. Booting up my phone with TW not responding, force close. Try again and again still cant boot into menu. I know i m stupid that didn't do a NAND backup before flashing it, and now i m stuck at this force close thing. So i found out out there there is a stock official rom XXUBMEA, i was previously from XXUAME2, can i flash this rom with odin?What is the complete process i need to do to flash this stock rom? Appreciate that you can help me so i can get back my phone!!
Click to expand...
Click to collapse
Yes u can flash the firmware if its for the same version u are having using ODIN
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware\
use the above link incase u wanna find more details abt stock firmware etc
Download the stock firmware u wanna install ope ODIN select the firmware thru PDA connect ur device in download mode make sure u have all drivers install once in download mode if the device is detected press start and let it do its work
Do unzip the firmware if its a Zip file and the file will be .tar
omiemer fed
123hiten said:
Yes u can flash the firmware if its for the same version u are having using ODIN
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware\
use the above link incase u wanna find more details abt stock firmware etc
Download the stock firmware u wanna install ope ODIN select the firmware thru PDA connect ur device in download mode make sure u have all drivers install once in download mode if the device is detected press start and let it do its work
Do unzip the firmware if its a Zip file and the file will be .tar
Click to expand...
Click to collapse
Thanks bro, anyway I'm from Singapore, and i would like to try out the latest firmware(GERMANY DBT I9505XXUBMEA), am i good to go for this 1? is there any problem if i flash this stock rom? Appreciate your help!! :good:
snoopy5 said:
Thanks bro, anyway I'm from Singapore, and i would like to try out the latest firmware(GERMANY DBT I9505XXUBMEA), am i good to go for this 1? is there any problem if i flash this stock rom? Appreciate your help!! :good:
Click to expand...
Click to collapse
No problem u can use that also it will work remember every time u flash it increases counter incase u visit a Samsung service centre u need to reset that using a tool Triangle away which works with root but this is later part incase u need for now u go ahead and flash it
Sent from my GT-I9500 using xda premium
123hiten said:
No problem u can use that also it will work remember every time u flash it increases counter incase u visit a Samsung service centre u need to reset that using a tool Triangle away which works with root but this is later part incase u need for now u go ahead and flash it
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Thousand thanks bro. Last question, will the flashing of this stock rom reset all my setting including the message, contact number and etc and finally roll back to unroot?
snoopy5 said:
Thousand thanks bro. Last question, will the flashing of this stock rom reset all my setting including the message, contact number and etc and finally roll back to unroot?
Click to expand...
Click to collapse
It will not delete the setting apps data etc since u are flashing with odin
However after flashing u make whatever data backup u need and reset the device completely so that the csc will match the new firmware and will work with kies
Sent from my GT-I9500 using xda premium
123hiten said:
It will not delete the setting apps data etc since u are flashing with odin
However after flashing u make whatever data backup u need and reset the device completely so that the csc will match the new firmware and will work with kies
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Hi bro, i have a doubt, first of all i must say thank you for your guide and finally i can successfully flash the latest fw. My doubt is that, is that necessary to do a full reset? and what actually csc will related to my fw? lastly, really thanks for your help to guide through a newbie!!
snoopy5 said:
Hi bro, i have a doubt, first of all i must say thank you for your guide and finally i can successfully flash the latest fw. My doubt is that, is that necessary to do a full reset? and what actually csc will related to my fw? lastly, really thanks for your help to guide through a newbie!!
Click to expand...
Click to collapse
its not exactly req to do a full reset but good if u do any issue u were facing b4 will be vanished
and full reset and start will make all changes in CSC etc
snoopy5 said:
Hi bro, i have a doubt, first of all i must say thank you for your guide and finally i can successfully flash the latest fw. My doubt is that, is that necessary to do a full reset? and what actually csc will related to my fw? lastly, really thanks for your help to guide through a newbie!!
Click to expand...
Click to collapse
You can extract csc from the stock firmwares. What carrier are you on?
lzk123 said:
You can extract csc from the stock firmwares. What carrier are you on?
Click to expand...
Click to collapse
how can i extract from stock firmwares? i just flash with I9505XXUBMEA so you mean i need to extract from this firmwares? anyway i'm from singapore and i believe my phone is not locked to any carrier.
snoopy5 said:
how can i extract from stock firmwares? i just flash with I9505XXUBMEA so you mean i need to extract from this firmwares? anyway i'm from singapore and i believe my phone is not locked to any carrier.
Click to expand...
Click to collapse
I believe you must flash the Singapore or near region Stock ROM.
Disturbed™ said:
I believe you must flash the Singapore or near region Stock ROM.
Click to expand...
Click to collapse
My stock rom suppose is I9505XXUAMEA2 if not mistaken and i rooted it last time, while i was flashing some mod just find out my TW launcher force stop and i need to use easy home mode. i mess up with it. saw the post said latest firmwares release which my country will not get it soon and i decided to flash GERMANY I9505XXUBMEA firmwares. surprisingly i din face with any problem like wifi not working, 4g lte non working and etc. everything just fine. i guess is my luck not to gone through factory reset to make CSC work?
snoopy5 said:
My stock rom suppose is I9505XXUAMEA2 if not mistaken and i rooted it last time, while i was flashing some mod just find out my TW launcher force stop and i need to use easy home mode. i mess up with it. saw the post said latest firmwares release which my country will not get it soon and i decided to flash GERMANY I9505XXUBMEA firmwares. surprisingly i din face with any problem like wifi not working, 4g lte non working and etc. everything just fine. i guess is my luck not to gone through factory reset to make CSC work?
Click to expand...
Click to collapse
Singapore I9505XXUBMEA firmware is out today. I'm also using the Germany version currently.

[Q] note 3 keeps restarting 10 times a day !

Hi All,
i,m Kriszty ( netherlands ) , my problem is that after a firmware update , my note 3 keeps restarting around 10 time,s a day, can i restore my old firmware, or install a new rom for resolving this problem ?, i bought it second hand, so i can,t return it to the shop
what to do ?
Baseband= N9005XXUBMJ2
Buildnr=JSS15J.N9005XXUBMJ3
kriszty said:
Hi All,
i,m Kriszty ( netherlands ) , my problem is that after a firmware update , my note 3 keeps restarting around 10 time,s a day, can i restore my old firmware, or install a new rom for resolving this problem ?, i bought it second hand, so i can,t return it to the shop
what to do ?
Baseband= N9005XXUBMJ2
Buildnr=JSS15J.N9005XXUBMJ3
Click to expand...
Click to collapse
yeah go sammobile should be able to find it there and your going to need odin to flash it
Hi,
thanks for your answer, but what do you mean with go sammobile ?
kriszty said:
Hi,
thanks for your answer, but what do you mean with go sammobile ?
Click to expand...
Click to collapse
http://www.sammobile.com/ all firmwares is on the website
ok, but i already have the newest N9005XXUBMJ3 firmware, but this gives me now a lot of problems, it tried yesterday the N9005XXUBMJ1 firmware for downgrading with ODIN3 , but that gives me only errors. so it looks i,m stock with this !
I would go into the android system recovery by holding volume up+home button+power button at the same time.
From there go to "wipe data/factory reset" and select yes.
After that select "reboot system now."
Once it's in go to settings/general/backup and reset. Choose to factory data reset.
That's assuming you are using a factory firmware and have backed up your important stuff. If that fails it could be a hardware problem which in that case, contact your local Samsung.
i already tried, but still the same.
the wierd thing is, that before the firmware update i had no trouble at all, so it has to be the new firmware !
i,m now downloading the MJ1 firmware, i will try to downgrade again ( hope it works )
if you are on N9005XXUBMJ3 you cannot backflash to N9005XXUBMJ1 because N9005XXUBMJ3 has a new bootloader with it and is not compatible with N9005XXUBMJ1
SquirtingCherry said:
if you are on N9005XXUBMJ3 you cannot backflash to N9005XXUBMJ1 because N9005XXUBMJ3 has a new bootloader with it and is not compatible with N9005XXUBMJ1
Click to expand...
Click to collapse
clear, thanks for the answer, so the solution will be waiting for a new firmware update, or will a custom rom solve my problem
kriszty said:
clear, thanks for the answer, so the solution will be waiting for a new firmware update, or will a custom rom solve my problem
Click to expand...
Click to collapse
I don't know for sure, but im on MJ3 also and have no problems at all, i have rooted with de_la_vega and installed Wanam framework and used TiBackup to remove a sh*tload of crapware samsung provided and still running strong. so maybe there went something wrong with your flash that causes the reboots, or maybe a faulty app.
Can't you just wipe back to factory settings in stock recovery? :L
nicholaschum said:
Can't you just wipe back to factory settings in stock recovery? :L
Click to expand...
Click to collapse
i can wipe back, but the firmware will be the same new one ?
kriszty said:
i can wipe back, but the firmware will be the same new one ?
Click to expand...
Click to collapse
Yes, but no one here seems to have the same problem, it is probably some problem app you have, or some settings that the system did not like.
You probably could have gotten a malware causing memory overloads, forcing a reboot, you never know. Wiping to factory is Step 1 at any time your phone is at a time like this.
nicholaschum said:
Yes, but no one here seems to have the same problem, it is probably some problem app you have, or some settings that the system did not like.
You probably could have gotten a malware causing memory overloads, forcing a reboot, you never know. Wiping to factory is Step 1 at any time your phone is at a time like this.
Click to expand...
Click to collapse
true,
just did, i will let you know what will happen the next hours.:good:

Soft brick !!!!!! plz help

hello everyone
i had an s4 running on 4.3 , so i tried to install KitKat which but i end up with a fail from Odin .
Now , i can access to download mode but not the recovery ( i guess it's a soft brick ), the problem is that i'm new in samsung ( my first one )
and i have no idear what to do
how do i know which stock firmware is the good one ?
a friend of mine told me that the boot is damaged , and i have no idear what that mean !!!!
please i realy need help
thanks
bernaw said:
hello everyone
i had an s4 running on 4.3 , so i tried to install KitKat which but i end up with a fail from Odin .
Now , i can access to download mode but not the recovery ( i guess it's a soft brick ), the problem is that i'm new in samsung ( my first one )
and i have no idear what to do
how do i know which stock firmware is the good one ?
a friend of mine told me that the boot is damaged , and i have no idear what that mean !!!!
please i realy need help
thanks
Click to expand...
Click to collapse
Search for the 4.4 (NAE) full .tar - it's here in the forums.
Flash that via PC Odin and you'll have a working 4.4 phone. If you want root you can use CF-Autoroot (make sure to grab the latest!) Thread is here too.
Then do some reading, searching and more reading. All your answers are here, really.
You're 'boot' is NOT damaged.
Just search read and you'll be fine.
leaderbuilder said:
Search for the 4.4 (NAE) full .tar - it's here in the forums.
Flash that via PC Odin and you'll have a working 4.4 phone. If you want root you can use CF-Autoroot (make sure to grab the latest!) Thread is here too.
Then do some reading, searching and more reading. All your answers are here, really.
You're 'boot' is NOT damaged.
Just search read and you'll be fine.
Click to expand...
Click to collapse
thanks for replying
can i flash it using a firmware downloaded from sammobile , cause i couldnt find in this forum or i didnt know where to find .
sorry
bernaw said:
thanks for replying
can i flash it using a firmware downloaded from sammobile , cause i couldnt find in this forum or i didnt know where to find .
sorry
Click to expand...
Click to collapse
Should be fine.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
Should be fine.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
thanks
okay i will try to flash it and let u know about about result
if any things happen ,now i know where to go and whom to ask
bernaw said:
thanks for replying
can i flash it using a firmware downloaded from sammobile , cause i couldnt find in this forum or i didnt know where to find .
sorry
Click to expand...
Click to collapse
Use the one from Sammobile as Daniel suggested.
But really, searching for the .tar - it's got it's on thread in the development sections http://forum.xda-developers.com/showthread.php?t=2663619
If you couldn't find it I'd suggest practice doing some more searching.
You should be good to go.
Good luck.

Want to make sure I'm alright before flashing up a version.

Hello,
I'm running KitKat 4.4.4 AOKP with a different kernel with CWM recovery and I want to return to stock touchwiz. I'm using a SM-N9005 (hlte)
Only problem is I cannot find a 4.4.4 stock touchwiz rom for my phone. So I headed to Sam Mobile and found some stock ROMS however they are Android Lollipop I think. So I downloaded this ROM:
http ://bit .ly/1Pkq933 and my question is can I just wipe and flash it, or will that screw my phone seeing as i'm going straight to Lollipop from KitKat??
Thanks in advance.
I don't know how to attach pictures so heres an imgur link to my "About Phone" screenshot, because I probably made a mistake somewhere: i.imgur .com/DzQCDpE. png
Sorry if working around the link filter is against a rule but I'm pretty bad at explaining things so a picture would hopefully eliminate the possibility of screwing up because of my own stupidity.
patrick3483 said:
Hello,
I'm running KitKat 4.4.4 AOKP with a different kernel with CWM recovery and I want to return to stock touchwiz. I'm using a SM-N9005 (hlte)
Only problem is I cannot find a 4.4.4 stock touchwiz rom for my phone. So I headed to Sam Mobile and found some stock ROMS however they are Android Lollipop I think. So I downloaded this ROM:
http ://bit .ly/1Pkq933 and my question is can I just wipe and flash it, or will that screw my phone seeing as i'm going straight to Lollipop from KitKat??
Thanks in advance.
I don't know how to attach pictures so heres an imgur link to my "About Phone" screenshot, because I probably made a mistake somewhere: i.imgur .com/DzQCDpE. png
Sorry if working around the link filter is against a rule but I'm pretty bad at explaining things so a picture would hopefully eliminate the possibility of screwing up because of my own stupidity.
Click to expand...
Click to collapse
1. Stock Touchwiz Rom doesn't have android 4.4.4.
2. Try to install first this APP and take a look you CSC. Coment it here.
Joku1981 said:
1. Stock Touchwiz Rom doesn't have android 4.4.4.
2. Try to install first this and take a look you CSC. Coment it here.
Click to expand...
Click to collapse
Thanks for helping Joku1981, it really means a lot. My CSC is OPS, if this has something to do with optus I dont know, as I use an Amaysim SIM card and it works
Thanks so much.
patrick3483 said:
Thanks for helping Joku1981, it really means a lot. My CSC is OPS, if this has something to do with optus I dont know, as I use an Amaysim SIM card and it works
Thanks so much.
Click to expand...
Click to collapse
I will help ya better if you add some screenshots coz OPS only have till android 4.4.2. Did you unlocked it by IMEI?
Joku1981 said:
I will help ya better if you add some screenshots coz OPS only have till android 4.4.2. Did you unlocked it by IMEI?
Click to expand...
Click to collapse
Thanks again. My phone is unlocked presumably as I can use another SIM.
About Phone screenshots in OP.
CSC page screenshots here: http ://i.imgur .com/nK7GNKq .png
Thanks so much for the help.
patrick3483 said:
Thanks again. My phone is unlocked presumably as I can use another SIM.
About Phone screenshots in OP.
CSC page screenshots here: http ://i.imgur .com/nK7GNKq .png
Thanks so much for the help.
Click to expand...
Click to collapse
1. Backup all your internal data to your pc (pics, folders, etc).
2. I recommend you use TWRP than CWM.
3. Wipe all (system, data, cache and dalvik).
4. Download, unzip and flash this firmware via ODIN in DOWNLOAD MODE then.

galaxy s3 neo no service

I have a gaalxy s3 neo (gt-i9301i) with a stock rom and rooted, i've tried to flash stock firmware with odin like 3-4 times but the problem is still here.
the problem is that i can't get service, with wind italy.
firmware I9301IXUAPG1.
I hope is the modem corrupted, can someone help me?
thank's.
Evasi0n3r said:
I have a gaalxy s3 neo (gt-i9301i) with a stock rom and rooted, i've tried to flash stock firmware with odin like 3-4 times but the problem is still here.
the problem is that i can't get service, with wind italy.
firmware I9301IXUAPG1.
I hope is the modem corrupted, can someone help me?
thank's.
Click to expand...
Click to collapse
See for Italy I found this:
https://www.sammobile.com/firmwares/galaxy-s--neo/GT-I9301I/ITV/download/I9301IXCUAPH1/94320/
Product code:ITV
PDA:I9301IXCUAPH1
CSC:I9301IITVAOL1
This is for Sony Sensors
Here is another one for Italy:
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2
Obviously it is for Samsung sensors because of NI/NJ.
Donyou have Sony or Samsung?
If you have a working stock with Modem. You can make a Backup only of the modem and flash it over working camera stock (I think that must work).
spirit_of_the_ocean said:
See for Italy I found this:
https://www.sammobile.com/firmwares/galaxy-s--neo/GT-I9301I/ITV/download/I9301IXCUAPH1/94320/
Product code:ITV
PDA:I9301IXCUAPH1
CSC:I9301IITVAOL1
This is for Sony Sensors
Here is another one for Italy:
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2
Obviously it is for Samsung sensors because of NI/NJ.
Donyou have Sony or Samsung?
If you have a working stock with Modem. You can make a Backup only of the modem and flash it over working camera stock (I think that must work).
Click to expand...
Click to collapse
Thank's, how i can say what sensor i have? i've tried to restore a working modem backup from another motherboard with charger broken but the result is the same
Evasi0n3r said:
Thank's, how i can say what sensor i have? i've tried to restore a working modem backup from another motherboard with charger broken but the result is the same
Click to expand...
Click to collapse
First of all relax.
I would try the updato link. Flash the firmware.
1. Check if provider service works.
If it works then
2. Check if your camera works.
If yes modem and camera works it is a good stock for you.
Maybe you can try and post the results. Don't worry. There are lots of people who want to help.
spirit_of_the_ocean said:
First of all relax.
I would try the updato link. Flash the firmware.
1. Check if provider service works.
If it works then
2. Check if your camera works.
If yes modem and camera works it is a good stock for you.
Maybe you can try and post the results. Don't worry. There are lots of people who want to help.
Click to expand...
Click to collapse
I'm relaxed, sorry if i seems hurt hahaha.
If this could help i can post Samsung info screen.
I have to try both firmware?
Evasi0n3r said:
I'm relaxed, sorry if i seems hurt hahaha.
If this could help i cani post Samsung info screen.
I have to try both firmware?
Click to expand...
Click to collapse
Try this at first:
https://updato.com/firmware-archive-select-model?record=3C31E6DACA1511E69215FA163EE8F90B
It is I9301IXUAPG1
A good Italian guy on homies wrote:
Alessandro ?, [29.03.18 21:29]
Because if it has sony sensor same to me, it needs to flash old stock and update via ota
Alessandro ?, [29.03.18 21:31]
This is the old stock for sony sensor
Alessandro ?, [29.03.18 21:32]
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2
Click to expand...
Click to collapse
Hey
Evasi0n3r said:
I have a gaalxy s3 neo (gt-i9301i) with a stock rom and rooted, i've tried to flash stock firmware with odin like 3-4 times but the problem is still here.
the problem is that i can't get service, with wind italy.
firmware I9301IXUAPG1.
I hope is the modem corrupted, can someone help me?
thank's.
Click to expand...
Click to collapse
HEY, i'm an Italian Boy
I have sony sensor and I think you have the same to me,
https://updato.com/firmware-archive-select-model?record=4AE87DBE1EF311E6949E0CC47A44B7B2 use this firmware and tell me, if you need help, text me on telegram @vespino_21
I have to wipe all or i can dirty flash those firmwares?
Thank's
Evasi0n3r said:
I have to wipe all or i can dirty flash those firmwares?
Thank's
Click to expand...
Click to collapse
I would make a clean flash.
News:
I've flashed all two firmwares, but no one show me benefits, i have another s3 neo motherboard with charger defect (all chargers make the phone lag and reboot sometimes) and all firmwares work well with reception.
I've followed these steps:
1) boot intwrp and wipe all
2) boot in download
3) flash (I9301IXXUANI1_I9301IITVANJ1_I9301IXXUANI2_HOME.tar.md5)
4) reboot
5) same very bad signal
other firmware:
1) boot in stock recovery and wipe
2) boot in download mode
3) flash (I9301IXCUAPH1_I9301IITVAOL1_I9301IXXUAPG1_HOME.tar.md5)
4) reboot
5) same very bad singal
I'm starting to think that this could be an hardware problem
Edit:
checked if my imei was bad for some reason, but is clean.

Categories

Resources