Database Users

[Q] Is my phone stuck forever?

Hello Xda Devs. I'm really new to android phones (I just switched from windows phone lately to try on low end android phone first). Since I heard that rooting are pretty awesome, I tried to root my phone by following these steps that I found over the net.
"This stage will be done on your phone so, switch your PC off.
1) Open Settings, go to Applications then Development and check USB Debugging.
2) Now reboot your phone and press VOL Up + Home + Power together during the booting.
3) The Recovery Mode will be opened. If you do not see the recovery mode then try the method no. 2 again.
4) In recovery mode use the Vol Up and Down buttons to navigate and the Home button to select.
5) Now select “Install Zip from SD card.”
6) Then select “Choose Zip from SD card” and find out and select the Zip previously downloaded.
7) The download process will start and will take more than 10 minutes.
8) After the completion of the update follow the next steps on recovery mode.
9) Then select “Wipe Data/Factory Reset”.
10) Now enable “Wipe Cache Partition”.
11) After that select “++++Go Back++++”
12) Reboot the phone and you shall get it rooted. "
I skipped Step 9 to 11. [Note: I didn't wipe out any data to prevent any data loss through the process). I followed the steps and managed to root my phone.
Then, I tried to download ICS for my SGY by following steps on another blog to change my phone to ICS. The steps given are :
"Process to Download Android Ice Cream Sandwich 4.0 for Galaxy Y
Download Android Ice Cream Sandwich 4.0 from here.
-Transfer this file to your Samsung Galaxy Y. It can be done by connecting device with computer via USB cable.
-If you are done with above, then next step is to boot your device to Recovery Mode. It can be done by pressing Volume Up +Volume Down + Power buttons together. Soon, an Android logo will surface on your device’s screen. This is the proof that you are in the Recovery Mode.
-Now navigate to the option that reads “install zip from SD card”. Don’t know how to navigate? Use Volume Keys!
-In the list that comes up, select the ROM file that you downloaded in the first step.
-Confirm the installation, and then wait for it to get finished.
-Go to main menu and select ‘reboot system now’.
-Your Samsung Galaxy Y will restart now. "
So far so good, then when it restart, my phone stuck on the animation mode. (Cynogenmod 9 animation).
Other than what I mention above, I did not install anything else and now I'm really confused. I'll attach a picture of the animation that I said. Please help. Thanks.

Before installing any custom rom u should always wipe data.

NewGuyArena said:
Hello Xda Devs. I'm really new to android phones (I just switched from windows phone lately to try on low end android phone first). Since I heard that rooting are pretty awesome, I tried to root my phone by following these steps that I found over the net.
"This stage will be done on your phone so, switch your PC off.
1) Open Settings, go to Applications then Development and check USB Debugging.
2) Now reboot your phone and press VOL Up + Home + Power together during the booting.
3) The Recovery Mode will be opened. If you do not see the recovery mode then try the method no. 2 again.
4) In recovery mode use the Vol Up and Down buttons to navigate and the Home button to select.
5) Now select “Install Zip from SD card.”
6) Then select “Choose Zip from SD card” and find out and select the Zip previously downloaded.
7) The download process will start and will take more than 10 minutes.
8) After the completion of the update follow the next steps on recovery mode.
9) Then select “Wipe Data/Factory Reset”.
10) Now enable “Wipe Cache Partition”.
11) After that select “++++Go Back++++”
12) Reboot the phone and you shall get it rooted. "
I skipped Step 9 to 11. [Note: I didn't wipe out any data to prevent any data loss through the process). I followed the steps and managed to root my phone.
Then, I tried to download ICS for my SGY by following steps on another blog to change my phone to ICS. The steps given are :
"Process to Download Android Ice Cream Sandwich 4.0 for Galaxy Y
Download Android Ice Cream Sandwich 4.0 from here.
-Transfer this file to your Samsung Galaxy Y. It can be done by connecting device with computer via USB cable.
-If you are done with above, then next step is to boot your device to Recovery Mode. It can be done by pressing Volume Up +Volume Down + Power buttons together. Soon, an Android logo will surface on your device’s screen. This is the proof that you are in the Recovery Mode.
-Now navigate to the option that reads “install zip from SD card”. Don’t know how to navigate? Use Volume Keys!
-In the list that comes up, select the ROM file that you downloaded in the first step.
-Confirm the installation, and then wait for it to get finished.
-Go to main menu and select ‘reboot system now’.
-Your Samsung Galaxy Y will restart now. "
So far so good, then when it restart, my phone stuck on the animation mode. (Cynogenmod 9 animation).
Other than what I mention above, I did not install anything else and now I'm really confused. I'll attach a picture of the animation that I said. Please help. Thanks.
Click to expand...
Click to collapse
go to recovery mode and wipe cache and data

MuSaddiq1410 said:
Before installing any custom rom u should always wipe data.
Click to expand...
Click to collapse
I didn't known that. So, what should I do now? My phone have been stuck on the animations for hours.

sangalaxy said:
go to recovery mode and wipe cache and data
Click to expand...
Click to collapse
Just done it. Should I reboot now ?

NewGuyArena said:
I didn't known that. So, what should I do now? My phone have been stuck on the animations for hours.
Click to expand...
Click to collapse
do as I said
switch off the phone take out the battery then put it on
press vol up+hom+power button you will go into recovery mode
wipe data and cache then reboot

NewGuyArena said:
I didn't known that. So, what should I do now? My phone have been stuck on the animations for hours.
Click to expand...
Click to collapse
Use odin to flash stock rom. Get odin and stock rom of ur region from this thread.

NewGuyArena said:
I didn't known that. So, what should I do now? My phone have been stuck on the animations for hours.
Click to expand...
Click to collapse
download any c.rom. . Wipe data and cache dn instal rom. . Also u can flash back to stock using odin.

To start off with we have no official ics for our device
there is cm9 but nothing works on it other than it boots
next to install any custom rom
go into cwm
wipe data wipe cache wipe system
Mount data mount cache mount system
flash rom zip
some roms for example cm7 require a specific kernel like percy#2 and extra steps
follow any instructions on the op of rom thread

NewGuyArena said:
I didn't known that. So, what should I do now? My phone have been stuck on the animations for hours.
Click to expand...
Click to collapse
Nothing wrong with the installation steps
U did everyhtng rite......but the thing is u didn't installed the suitable CM9 kernel
That is why it is said be sure that u did everything rite
Things u can do now
1-Flash Stock rom via odin,it will make ur phone as a fresh newly bought phone (browse for odin flash guide and stock firmware for galaxy y)
2-the easiest thing-Flash CM9 kernel I.e white kernel via odin.....and then ics will surely boot on ur sgy
^ is of no use bcoz ics cm9 has got many bugs its yet to be stable
Phew! That was a long explaination........
I need cookies now....I am hungry.....

Thanks everyone for the superb fast reply. Since ICS is not working so, I decided to use Odin to flashback to my normal version firmware. So, is there steps on how to use Odin ? (I've just installed a zip file of the firmware and also Odin)

sangalaxy said:
go to recovery mode and wipe cache and data
Click to expand...
Click to collapse
Like @-calibian666- said u've been a thanks collector all around.....don't guide people wrongly just. For thanks and increase ur post count....thanks really doesn't matter

D4rkSh4dow said:
Like @-calibian666- said u've been a thanks collector all around.....don't guide people wrongly just. For thanks and increase ur post count....thanks really doesn't matter
Click to expand...
Click to collapse
mm ok sir but I didn't posted it for thanks
as per the question he didn't wipe the data or cache before and after flashing cm9
so I just asked him to do that AFAIK it is not a wrong guide

sangalaxy said:
go to recovery mode and wipe cache and data
Click to expand...
Click to collapse
Like @-calibian666- said u've been a thanks collector all around.....don't guide people wrongly just. For thanks and increase ur post count....thanks really doesn't matter

Now, is there any link to guide me on how to use Odion and so on ? And also, does USB debugging works on my current 'unstable-ICS' ? I need to connect to my laptop.

NewGuyArena said:
Now, is there any link to guide me on how to use Odion and so on ? And also, does USB debugging works on my current 'unstable-ICS' ? I need to connect to my laptop.
Click to expand...
Click to collapse
use this guide LINK

NewGuyArena said:
Thanks everyone for the superb fast reply. Since ICS is not working so, I decided to use Odin to flashback to my normal version firmware. So, is there steps on how to use Odin ? (I've just installed a zip file of the firmware and also Odin)
Click to expand...
Click to collapse
Steps to unbrick device via odin
-Install samsung USB drivers
-Turn off ur phone into download mode(voldown+power+home)
-Plug in ur device via usb cable
-u will see a yellow box says about ur com port....
-if that appers go ahead,if not....the drivers isn't installed(uninstall and reinstall again)
-select PDA browse for ur firmware package the folder in which it is extracted
-put the files according...CSC,MODEM,PDA
-Click Start
-wait till its done
-Sucess
Sorry for late reply....I was studying...
I need more cookies

D4rkSh4dow said:
Steps to unbrick device via odin
-Install samsung USB drivers
-Turn off ur phone into download mode(voldown+power+home)
-Plug in ur device via usb cable
-u will see a yellow box says about ur com port....
-if that appers go ahead,if not....the drivers isn't installed(uninstall and reinstall again)
-select PDA browse for ur firmware package the folder in which it is extracted
-put the files according...CSC,MODEM,PDA
-Click Start
-wait till its done
-Sucess
Sorry for late reply....I was studying...
I need more cookies
Click to expand...
Click to collapse
Well, your instructions are much more easier to understand rather the original post. I was a bit confused there... Hahaha... but everything back to normal now. Now, I've load of updating and downloads to does back.

Thanks everyone for the great help.

NewGuyArena said:
Well, your instructions are much more easier to understand rather the original post. I was a bit confused there... Hahaha... but everything back to normal now. Now, I've load of updating and downloads to does back.
Click to expand...
Click to collapse
I am always there to help you.......next guide on its way

[Q] How to use the Custom ROM on N9005 LP 5.0

Hi ALL,
Good day!
I'm new in an Android Phone and just Rooted my device yesterday using the KingRoot.
I just wondering how to use a custom ROM available here in XDA in my Samsung Note III.
If there's a link on where I can review or follow the procedure, could you please redirect me.
I've already looked/searched for it but unfortunately, I can't get the answers on my own.
thanks in advance!
Mark

http://forum.xda-developers.com/showthread.php?t=2439633
You choose a custom rom you read and understand the rom and its instructions then flash .
Many roms have how to videos .
Basics
Download the Rom
Enter Recovery Mode
Do a Full Wipe
Install The Rom
Reboot - The first boot can take up to 10 min

JJEgan said:
http://forum.xda-developers.com/showthread.php?t=2439633
You choose a custom rom you read and understand the rom and its instructions then flash .
Many roms have how to videos .
Basics
Download the Rom
Enter Recovery Mode
Do a Full Wipe
Install The Rom
Reboot - The first boot can take up to 10 min
Click to expand...
Click to collapse
thanks for your kindness.. :good:
Is there any link also in doing the flash.. (apology for spoon feeding)
I just don't know how or where to start.. lol
TIA!

First step should be install a custom recovery. For example TWRP. You can't install with stock recovery.
Google : twrp for note 3 xda
Then read, read and install it.
Here is the link, you can see video.
forum.xda-developers.com/showthread.php?t=2494245
Find a rom i development forums here and look for instructions there.

Steps....
-1. I am not responsible for any damage caused. This is how I learned and what I taught my friends using Sammy.
0. Backup all your data to SD card or PC.
1. go to https://twrp.me/Devices/ and search your device model and download the latest .tar file (something like 4.4.tar)
2. search download and install Kies in your PC, this is for getting all Samsung drivers.
3. search download and extract "odin 3.0.9" in a folder in your pc.
4. press Volume Down + Home + Power and get into Download mode (you'll have to press Volume Up if it asks to continue)
5. Now phone will show "Downloading", Run "Odin.exe" from odin folder and Connect your phone to PC via USB cable.
6. Odin will detect your phone in blue color in first slot, select the downloaded .tar file in Odin and click start
7. do not disconnect the phone as it will restart.
8. after restarting, remove phone. then shutdown.. press Volume Up + Home + power and get into recovery. (TWRP) (click Reboot System and use as normal)
9. Download your favorite (flashable zip of) ROM, click Wipe (select all in TWRP, will erase all data)
10. After successful wipe, click install, select ROM zip from SD card and follow onscreen instructions.
11. After install, go to Wipe or Advanced Wipe and "Clear Dalvik Cache"
12. Reboot System. Enjoy

[help]cm13 6.0.1 on e500h

i flashed a cy rom from lollipop 5.1.1. but brfore flashing the cm13 marshmallow 6.0.1. i backed up thru twrp. now i'm using cm13. what if i restore my lollipop thru twrp? is it possible and may not cause any problem nor deadboot? i've been in technicians in malls. they say that there's a possibilities to be be deadboot and may not use anymore unless need to replace mother board. i want to get back on lollipop not cm lollipop. just the stock firmware. what should i do? ?

e5 user said:
i flashed a cy rom from lollipop 5.1.1. but brfore flashing the cm13 marshmallow 6.0.1. i backed up thru twrp. now i'm using cm13. what if i restore my lollipop thru twrp? is it possible and may not cause any problem nor deadboot? i've been in technicians in malls. they say that there's a possibilities to be be deadboot and may not use anymore unless need to replace mother board. i want to get back on lollipop not cm lollipop. just the stock firmware. what should i do?
Click to expand...
Click to collapse
Don't do these all things you may miss your device,
Just do these step
1. Download stock official ROM
2. Backup all your data to sd and Trunoff device
3. Go to TWRP (power+home+vol up)
4. Wipe "factory format"
5. Wipe "data" by typing 'yes'
6. Wipe "advance wipe" by check all
without sdcard or external drive
7. Do not power off device
8. Direct go to download mode from TWRP
Press and hold (power+home+vol down)
9. Flash official ROM with ODIN
10. After all complete again go to recovery mode
and wipe "partition cache" and "factory format"
11. Reboot device it's done.
12. If you want to restore your backup
13. Root- flash TWRP-Restore
14. Done
If it helpful for you please press thanks

pkdubai20 said:
Don't do these all things you may miss your device,
Just do these step
1. Download stock official ROM
2. Backup all your data to sd and Trunoff device
3. Go to TWRP (power+home+vol up)
4. Wipe "factory format"
5. Wipe "data" by typing 'yes'
6. Wipe "advance wipe" by check all
without sdcard or external drive
7. Do not power off device
8. Direct go to download mode from TWRP
Press and hold (power+home+vol down)
9. Flash official ROM with ODIN
10. After all complete again go to recovery mode
and wipe "partition cache" and "factory format"
11. Reboot device it's done.
12. If you want to restore your backup
13. Root- flash TWRP-Restore
14. Done
If it helpful for you please press thanks
Click to expand...
Click to collapse
after flashung stock rom from odin.. it will automatic restart right? how could it be done from step 10 onwards? should i wait to reboot then turn off again?

e5 user said:
after flashung stock rom from odin.. it will automatic restart right? how could it be done from step 10 onwards? should i wait to reboot then turn off again?
Click to expand...
Click to collapse
Yes, "after all complete"
I mean - flash finished - device auto Reboot -
after boot complete - Trunoff device -
go to recovery mode
Thanks

pkdubai20 said:
Yes, "after all complete"
I mean - flash finished - device auto Reboot -
after boot complete - Trunoff device -
go to recovery mode
Thanks
Click to expand...
Click to collapse
thanks. will do this by next week. hope i will not get on a deadboot.. should i use the firmware on samfirmware/sammobile?

pkdubai20 said:
Yes, "after all complete"
I mean - flash finished - device auto Reboot -
after boot complete - Trunoff device -
go to recovery mode
Thanks
Click to expand...
Click to collapse
and.. what if i choose to get back on kitkat instead of lollipop? would it be work?

e5 user said:
and.. what if i choose to get back on kitkat instead of lollipop? would it be work?
Click to expand...
Click to collapse
Yes offcurse

pkdubai20 said:
Yes offcurse
Click to expand...
Click to collapse
Hipe by next week. It will work.. do you have any linka where to dowbload frimware aside frim sammobile?

[TUTORIAL] How to flash ROM's on Galaxy Tab 2's with dead USB cables.

It happened to me a lot, but yea let's start.
You might have noticed that the Tab 2 cables die quickly, even tho they should be "high quality".
They start only charging the device slowly as never, and the computer can't even recognize the tablet.
So what do you need to reflash the OS?
1. FlashFire from Chainfire (requires root, on Play Store)
2. Any file manager
[STOCK ROMS]
1. Download the rom you want and move it to your SD card using a file manager. I use FX File Manager, it's good luls
2. In FlashFire, add Wipe and select Cache and leave the other on options turned on.
3. Select the ROM. Voila, should work.
[CUSTOM ROMS]
1. Install the TWRP app
2. Make sure your tab is rooted
3. Install TWRP.
4. Get any rom. I used the 7.1.x one from unlegacy-android.
5. Flash it, clear dalvik, cache and data.
6. Voila, done!

Nice guide, I already did that before

Fajormein said:
It happened to me a lot, but yea let's start.
You might have noticed that the Tab 2 cables die quickly, even tho they should be "high quality".
They start only charging the device slowly as never, and the computer can't even recognize the tablet.
So what do you need to reflash the OS?
1. FlashFire from Chainfire (requires root, on Play Store)
2. Any file manager
[STOCK ROMS]
1. Download the rom you want and move it to your SD card using a file manager. I use FX File Manager, it's good luls
2. In FlashFire, add Wipe and select Cache and leave the other on options turned on.
3. Select the ROM. Voila, should work.
[CUSTOM ROMS]
1. Install the TWRP app
2. Make sure your tab is rooted
3. Install TWRP.
4. Get any rom. I used the 7.1.x one from unlegacy-android.
5. Flash it, clear dalvik, cache and data.
6. Voila, done!
Click to expand...
Click to collapse
on firmware option for stock rom flash did u tick modem firmware or u leave it as it is ?

What do you do if you find that the cable is broken when you wiped wverything(system too) in recovery and you go in download mode and the cable doesn't work???? :'(

lukigno95 said:
What do you do if you find that the cable is broken when you wiped wverything(system too) in recovery and you go in download mode and the cable doesn't work???? :'(
Click to expand...
Click to collapse
Since you still have the recovery just place a rom in a sdcard and install it with the recovery.

john99ap said:
Since you still have the recovery just place a rom in a sdcard and install it with the recovery.
Click to expand...
Click to collapse
In the cyanogenmod recovery there isn't the "install" button to flash a .zip file...
I have only " apply update" that looks only in /data/media path with no way to go into the sd card, and apply update from ADB but usb connection doesn't work
Please help me I need too unbrick this tablet :crying::crying:
I don't understand why USB connection doesn't work with pc and just work for charging... I tryed with every driver versions , computers and odin version but is invisible to computers....

The only problem now is that in stuck with stock recovery, stuck on bootlogo and without an USB.
The only way to fix now certainly is sending to repair.

g900p root problem

good evening*
i have rooted my s5 sprint from the cf website for freezing some apps like whatsapp
but after rooting i tried to freeze whatsapp
the icon dissapeared but it still received the messeges and showed notifications which means i cant freeze although i tried alot of apps*
how i can solve the problem?
please help me

Why did you use that app any way.. Just Odin back to full stock. Odin TWRP, and flash SuperSu in recovery and your done.

doubledragon5 said:
Why did you use that app any way.. Just Odin back to full stock. Odin TWRP, and flash SuperSu in recovery and your done.
Click to expand...
Click to collapse
please bro could u tell me more about this way

First, go to the link provided https://samsungodin.com/ I would download V310.6 personally.. It must be run in a Windows Enviorment IE. Win 7, Win 10 etc. Put you phone into download mode Volume down, home button, the power button all at the same time. Plug your USB cable into a USB port on your computer, and plug in your phone. Unzip Odin, then open and right click Icon, and run as administrator.. Put TWRP. zip in the AP slot. Under options in Odin uncheck reboot and reset, hit the start. When it says pass, unplug your phone, pull battery. But battery back in. Then hold Volume up, home, and the power button, and your phone will start in TWRP recovery.

doubledragon5 said:
First, go to the link provided https://samsungodin.com/ I would download V310.6 personally.. It must be run in a Windows Enviorment IE. Win 7, Win 10 etc. Put you phone into download mode Volume down, home button, the power button all at the same time. Plug your USB cable into a USB port on your computer, and plug in your phone. Unzip Odin, then open and right click Icon, and run as administrator.. Put TWRP. zip in the AP slot. Under options in Odin uncheck reboot and reset, hit the start. When it says pass, unplug your phone, pull battery. But battery back in. Then hold Volume up, home, and the power button, and your phone will start in TWRP recovery.
Click to expand...
Click to collapse
thanks bro i know about the root but could u tell me what is TWRP
and thank u again

oloay said:
thanks bro i know about the root but could u tell me what is TWRP
and thank u again
Click to expand...
Click to collapse
TWRP is the custom recovery you flash in Odin, to replace stock recovery. You need that to install custom roms and mods.
Go to this link https://dl.twrp.me/klte/ I would download 3.0.2-1-ktle.img.tar. to your desktop. Open up Odin uncheck reset, and reboot. Place phone in download mode Volume down+home+power. Open up Odin choose AP find your file and insert, then hit start. When done pull battery, but battery back in then Volume up+Home+Power and you will boot into recovery.

doubledragon5 said:
TWRP is the custom recovery you flash in Odin, to replace stock recovery. You need that to install custom roms and mods.
Go to this link https://dl.twrp.me/klte/ I would download 3.0.2-1-ktle.img.tar. to your desktop. Open up Odin uncheck reset, and reboot. Place phone in download mode Volume down+home+power. Open up Odin choose AP find your file and insert, then hit start. When done pull battery, but battery back in then Volume up+Home+Power and you will boot into recovery.
Click to expand...
Click to collapse
u mean i will flash TWRP exactly as i flash the rom and root and thats it right bro

oloay said:
u mean i will flash TWRP exactly as i flash the rom and root and thats it right bro
Click to expand...
Click to collapse
Flash TWRP first in Odin.. Then what ever Rom you use, will already have root (some dev's might require you to install root as well separate from the ROM you use).. Put the ROM of your choice on your External SD card. Go to recovery wipe cache dalvik/cache, system, data, internal storage. This is why you but the ROM of your choice on a External sd card, because you will wipe the internal storage. Flash ROM and reboot.. Now of course follow the dev's install instructions, as you might have to do something different. But that is usually the normal process to flash a custom ROM.

doubledragon5 said:
Flash TWRP first in Odin.. Then what ever Rom you use, will already have root (some dev's might require you to install root as well separate from the ROM you use).. Put the ROM of your choice on your External SD card. Go to recovery wipe cache dalvik/cache, system, data, internal storage. This is why you but the ROM of your choice on a External sd card, because you will wipe the internal storage. Flash ROM and reboot.. Now of course follow the dev's install instructions, as you might have to do something different. But that is usually the normal process to flash a custom ROM.
Click to expand...
Click to collapse
thanks alot i will try now

doubledragon5 said:
Flash TWRP first in Odin.. Then what ever Rom you use, will already have root (some dev's might require you to install root as well separate from the ROM you use).. Put the ROM of your choice on your External SD card. Go to recovery wipe cache dalvik/cache, system, data, internal storage. This is why you but the ROM of your choice on a External sd card, because you will wipe the internal storage. Flash ROM and reboot.. Now of course follow the dev's install instructions, as you might have to do something different. But that is usually the normal process to flash a custom ROM.
Click to expand...
Click to collapse
I flashed TWRP then wiped what u said after that i flashed the ROM and because it was not rooted i rooted it
But unfortunately the same problem appears again

oloay said:
I flashed TWRP then wiped what u said after that i flashed the ROM and because it was not rooted i rooted it
But unfortunately the same problem appears again
Click to expand...
Click to collapse
Which ROM are you using. What was the initial problem you first had

oloay said:
I flashed TWRP then wiped what u said after that i flashed the ROM and because it was not rooted i rooted it
But unfortunately the same problem appears again
Click to expand...
Click to collapse
Try Titanium back up and root from the play store.. Uninstall Whatsapp.

doubledragon5 said:
Flash TWRP first in Odin.. Then what ever Rom you use, will already have root (some dev's might require you to install root as well separate from the ROM you use).. Put the ROM of your choice on your External SD card. Go to recovery wipe cache dalvik/cache, system, data, internal storage. This is why you but the ROMi of your choice on a External sd card, because you will wipe the internal storage. Flash ROM and reboot.. Now of course follow the dev's install instructions, as you might have to do something different. But that is usually the normal process to flash a custom ROM.
Click to expand...
Click to collapse
doubledragon5 said:
Which ROM are you using. What was the initial problem you first had
Click to expand...
Click to collapse
downloaded the ROM from sammobile
the problem not only in whatsapp its also in telegram and facebook messenger when i freeze them the icon disappear but it still recieves the messeges ???
and i dont want anybody to know that i recieve them

oloay said:
downloaded the ROM from sammobile
the problem not only in whatsapp its also in telegram and facebook messenger when i freeze them the icon disappear but it still recieves the messeges
and i dont want anybody to know that i recieve them
Click to expand...
Click to collapse
If you do not use those app, I just uninstall them period, through Titanium Back Up and Root.. Better yet you really should try flashing a custom rom, you won't have all that garbage.. I'm using this one
https://forum.xda-developers.com/galaxy-s5/unified-development/rom-crdroid-t2860894
It runs great.. Give me a minute, I going to upload the files you need, so you do not have to go through the trouble of downloading them..
https://drive.google.com/file/d/1hngaYFM61jXI8WYc1WbfoXaSYgYnXIBp/view?usp=sharing
https://drive.google.com/file/d/1ahc6IH1cdtW5W_xXveC0nf4DEqkHuBG1/view?usp=sharing
https://drive.google.com/file/d/1ofmVfO5pBu7r3tq_qD620WiUSwdIMAVG/view?usp=sharing
Put all three files on your external sd card.. Do a full wipe, data, system, cache, delvik/cache
1) Install the rom first (do not reboot yet)
2) Install gapps (do not reboot yet)
3) Then install SuperSu- reboot, and set up normal.
Be sure to give proper credit to the crdroid team..