Related
I have some contacts saved in my contact list, but when that person calls. It showed up unknown caller. I tried to deleted that number and save it again. But it still shows unknown caller. Some other contacts are fine. Anyone had this problem and has a solution? Is there anything to do with restore? I did a restore recently.
don't know if it helps, but try to save the numbers with the country prefix in the contact.
for example in France here, I save them as +33654321 instead of 0654321, cause I had the same problem some time ago
This doesn't have anything to do with the Wizard - if the Wizard shows "unknown caller" it means that the caller's phone doesn't send the number (the caller can change that, depending on the SIM card - and the caller can also tell the telecom provider of his home phone whether he wants his number to be sent when calling!)...
No way to change that for you, sorry!
I have tried adding the prefix, but still doesnt work!
The number from the caller is not hidden, because the number is displayed, but not the name in the contact list.
for example:
Incoming call
'Unknown Caller'
0709XXXXXX
I have tried to delete and save the contact again, but still the same!!
Oh, so I misunderstood...
Sorry, but then I don't have any idea...
Not sure if this helps. I had the same experience with my other phone (not Pocket PC type), which shows unknown caller even I'm very sure I had his number on my phone, I deleted the number and put it back again, same problem. AND, after all the stuggle, I've finally noticed the problem, which is the fact that I had his name entered twiced (e.g. two contacts, different name with same number). The phone probably got it confused and refused to display a name.
I would suggest, that you remove your problematic contact, try dialing his number on the keypad, and see if the name appears (e.g. the other possible contact that has the same number). If not, then it is not this problem, I guess.
Was about to say, I got this problem, turned out to be a duplicate contact - the phone can't decide who it is, so displays nothing. Pfff.
Be nice if it displayed a list of possible contacts, but...
Delete any duplicate contacts and it should go away.
Hello everybody,
I have a strange problem with my PDA. I'm using WM6 Black Satin ROM. My contact list contains over 400 contacts (and over 500 phone numbers). Each phone number is saved in format +xx xxxxxxxxx, cause in that format it comes from Outlook. Most phone numbers have +48 as country prefix and 9 digits with phone number (cause in Poland cellular phone numbers have 9 digits). I have set Call Id match value to 9.
Everything worked fine, but from a few days i noticed, that some (about 10% of all) contacts are not recognizedy by phone when someone calls. PDA displays only phone number (the same which is stored in my contact list), but cannot find contact name. Similar - when SMS arrives, I can see only phone number, name is not recognized. When I open SMS and tap sender's phone number, PDA asks if he should store that number in contact list (that number is already there). Storing doesn't help - I tried to create new contact, store in existing.
I tried to delete problem contacts and recreate them - it helped in 2-3 contacts, rest still is not working properly. I tried to change Call ID match value - tried values between 3 and 12, doesn't change anything. In some cases, phone recognizes phone numbers after removing '+' from phone number, but without '+' I'm unable to make calls. I can remove whole '+48' (and phone recognition still works), but I need country prefix, cause I often have to make calls using roaming.
Please HELP !!!!!!!!!
Have you tried 0048 instead of +48 for the problem numbers? I noticed when my Hermes had its original WM5 ROM, some numbers were sometimes presented by the other mobile network as "07" instead of "+447", so I had that problem. I just had to make extra entries in my contacts lists...
It's not done that though for a long time now (I've changed ROMs a couple of times too), sorry I can't help more.
Thanx for replying. I tried to replace '+' with '00', but PDA still doesn't recognize that number. I think that in some cases '+' makes, that phone number cannot be found.
Maybe there is another setting in registry, which defines length of phone number compared to number from incoming call? I found this setting in HKCU\ControlPanel\Phone\CallIDMatch. It looks like sometimes PDA doesn't use that setting, cause my numers ale longer than 9 characters (usually 12 including '+'), and adding '+' as first character makes them unrecognizable.
hello,
when someone calls my diamond II
it only shows the number of the caller, but not the name even though they are in my contacts how can i change this so it says who calles by name instead of number..
thanks for any reply
This sometimes happen if you have multiple entries of the same number....then phone shows only number and no name.....Is this happening for each incoming call..or just for few contacts...
for all contacts it happens, but most do have an mobile number and an home number..
can i change anything to fix it? or is it a fault on the diomand II .
Multiple numbers for same contact should not be a problem, but multiple contacts for the same number sometimes causes this....fr me it is working fine, so it should not be a TD2 bug..
pgu said:
Multiple numbers for same contact should not be a problem, but multiple contacts for the same number sometimes causes this....fr me it is working fine, so it should not be a TD2 bug..
Click to expand...
Click to collapse
all contacts have just one mobile number and one home number so i don't know where to search a solution
but thanks for your reply
Try to not use the prefix.
(+countrycode)
Should do the trick
this was discusserd once already (I think. I can recall the drop the prefix solution). Search a bit. alas, I will give you a link if I find one
Im having a similar problem. The caller id dosent work for some of my contacts, both when they phone me or when they send a SMS. Im sure they are saved in my phone and not on my sim and from what I can see there isn´t any difference from how they are saved in my phone book from the ones that the caller id works for. Its really strange and annoying. Hope someone has a solution for this problem.
Did you try just delete that contact and make it again. I know it's stupid question but ...
prdic said:
Did you try just delete that contact and make it again. I know it's stupid question but ...
Click to expand...
Click to collapse
yes i did. I also tested to make a new contact from the sms view with the option save contact with the actual number that shows instead of the name and it still didnt work. Thanks anyway.
Hey,
I've had the same problem since day of purchase. I did the reg edit to increase the numbers the phone looks at to identify a number but it still didn't work. I've also deleted and re-created the contacts with no success.
ALL,
I had this problem. I submitted the case to HTC Europe but I did not even get a call back after a few months had passed.
Unfortunately the only way to do this is to hard reset the phone.
You will loose all your phone data (contacts etc) but the files on your memory card will be ok.
When you reset the phone, even if you have NO contacts at all on your sim card, you still have to tell the wizard on the first boot to import your SIM contacts. This, for some silly reason, is the only way to get the phone to register the phone contacts from your phonebook, even if you are just using the non-SIM contacts.
I had no numbers on my SIM card and of course I did not select the option to import my contacts. I was going to do that myself via Outlook. Once I selected not to import the contacts, not one number was recognized.
I did a Hard Rest. If you have numbers or not on your SIM does not matter. Allow the initial start-up wizard to import from the SIM. Then continue.
This solved this VERY ANNOYING issue for me. I used SPB backup first to take a copy of my phone data before the reset.
- Geoff
i had this problem too, solution is change registry:
HKCU\ControlPanel\Phone\CallIDMatch:9(DWORD)
this means phone will identify number by 9 last digits - meaning its ignoring country code.
*if 9 not working for you try 10/11/12... one of these should fix.
bnm7bnm said:
i had this problem too, solution is change registry:
HKCU\ControlPanel\Phone\CallIDMatch:9(DWORD)
this means phone will identify number by 9 last digits - meaning its ignoring country code.
*if 9 not working for you try 10/11/12... one of these should fix.
Click to expand...
Click to collapse
hello
today I tried all the numbers, from 7 to 12
11 was the value that made me look some of my callerID. now I have the same problem, but not with everybody, but only some people
let's say a 50% of my contacts are shown on the screen when they are calling me/sending me an sms, but the other 50% doesn't show me the name but just the number.
today I tried with my mom's phone to call me. it didn't show the name. So i deleted her name from the contact, and added it again (from the missing call). now it's showing her name... Do I have to do it with all the phonebook?
is there something I can do to fix it? it's making me crazy
please help me..
I have, absolutely same problem, erasing the contact and creating it again, did not solve, very very strange. I've tried iterchange of numbers home>work, work>home, work> auto, home > auto, invane, some of contacts refuse to display name, compared the phones i have no same numbers for names ecc. First of all i have to mention that numbers have been migrated from Nokia 6230i via Outlook Express > Outlook > Phone , some of the numbers like Home, Bussiness Fax ecc, did not passed to Diamond 2
I've just noticed that a Hotfix was released a few days ago, which just might solve this problem.
Titled: Update for HTC Touch Diamond2 for Caller ID Display
I haven't tested it yet, so let us know if it works for anyone
try to make all contacts same format with TrineFix or similar app,
set numbers without country code, for example in israel i set 05XXXXXXXX instead of +9725XXXXXXXX, then i change CallIDMatch to 8.
this is how it works for me.
I had a problem with none of my contacts names coming up when they called me, it would only show their number. After x2 software resets and installing everything again I found the problem, when you do a software reset and you turn the phone on for the first time when it asks you to import from your sim card contacts DONT DO THIS if you sync your phone with Active Sync and outlook contacts as this is where the problem is.
If you import your contacts from your sim and you sync with outlook then your caller id's will not work.
This is a really strange problem and I'm hoping someone can help me with it.
For some reason on my Treo Pro, there is this one specific random phone number which, although I can add it to a new or existing contact and it will show up correctly under that person in the Contacts app, does not seem to be recognized, remembered or associated throughout the rest of the phone.
Meaning, if I get an incoming call from that number it shows up as an unknown caller, displaying the number but no associated contact name. If I check my call log the number shows up there, rather than the contact name. Also in text messages, it just shows as the number by itself, again rather than the contact name to which it belongs. If I tap on that number in the SMS dialog, it tells me "This person is not in your contact list..." and asks me if I want to add them. And whether I add that number to an existing contact or create a new one for it, nothing changes. If I tap the number again, it still tells me it is not in my contact list. Over, and over, and over again. It just will not "stick" or take, permanently.
There is nothing odd about the actual number itself. It's the exact same format as all the other numbers in my contacts (1-416-xxx-xxxx). And I've tried adding the number in every possible way, with and without area code, '+' sign, '1' in front etc.. nothing makes a difference. I've rebooted the phone after adding it, and still no effect. It just will not recognize this phone number as belonging to a contact, even though under the contact it appears correctly, and I can call or text it from the contacts app.
Is there any reason this would be happening, or any way to fix it? Any help is greatly appreciated, thanks...
I have the same frustrating problem on my Treo Pro - contact names do not display even though they are saved to phone memory. The only solution I have found is to delete the contact and create a new one e.g. from the number that appears in call log or SMS. I presume the reason is Sprite Backup doing somethig wrong with the databases when restoring contacts after hard reset.
Hello guys,
i'm facing a strange problem with my s7 edge, it just mix the contacts number randomly. Many times i'm trying to call someone and when i do i found that it's not the one i'm trying to call!! after a deep look into my contact list i found that the phone is copying another contact phone number to another contact name, i will have two numbers under the same contact name, and when i press edit i just see the original number, the other number "the one the phone copy it himself" isn't there! i tried to show only my device contacts or google account contacts but still same problem.
Any ideas! thanks
This has never happened on my edge. Are you using any third party contact apps or dialers?
No just the regular contact app