Guys , I m trying to dual boot my hd2.....but whenever I try to run android kitkat it says kernal fail to open........so plz help me
it wouldn't have hurt to give a little more information
Evilmegadroid, I have done all the process correctly to dual boot my hd2.....wp7 works good but whenever trying to boot android kitkat in maglder it says kernal fail to open....i m using mac4a by macs18max rom.....plz , help me....
Make sure you've set the SD dir to NativeSD.
10.Services => 3. AD SD Dir => select NativeSD
HypoTurtle said:
Make sure you've set the SD dir to NativeSD.
10.Services => 3. AD SD Dir => select NativeSD
Click to expand...
Click to collapse
Then 2. boot ad sd
....but there is no native sd option....i have selected 10.services then 1.boot setting then 3.ad sd dir then it shows my kitkat rom name 'mac4a' then 2. Boot ad sd......this is the process i hv done....plz tell me what should i do?
What's inside the mac4a folder? Also check file sizes
mac4a foldler contain extracted rom files i.e 5 flies boot , meta inf, mods, sdcard and system.......
mac4a folder size is 347mb.....m i doing it wrong?
plz reply fast. I m waiting for ur reply.
It sounds like you have extracted the zip and put it on your sd card, instead of installing the zip from recovery.
Have you created an ext4 partition on your sdcard?
finally u got my problem....yes, i have extracted zip file and put all the 5 folders on sd card...but not done ext4 .....plz help me.....explain the solution in detail.
plz, reply fast......
please, reply....still waiting
how to install zip from recovery? Plz help.
it is best to use minitool partition wizard http://www.partitionwizard.com/free-partition-manager.html which you might have already. Be careful to identify which is your sdcard and which is your pc and/or hard drive, you do not want to delete your hard drive
Assuming you have FAT32 on the left and an "unformatted" partition on the right (which holds your WP7), you need to create a new ext4 partition from the fat32 partition in the middle, without touching the wp7 partition.
So delete the fat32 partition, then create a 2gb smaller fat32 (primary, default clusters) using the slider on the right
Then create the 2gb ext4 partition (primary, default clusters) in the middle.
Press the tick to actually start the process, or undo if you made a mistake.
You should then have 1st fat32, 2nd ext4, 3rd "unformatted" (it may say "other" for filesystem=wp7) all primary.
You then need to put an sd recovery on the fat32, such as https://goo.im/devs/Xylograph/Various/Recoveries/SD/
unzip it and put the folder with the files in it on your sd card.
put the rom.zip also on the sdcard do not unzip it.
put card in phone
magldr 10 services > 1. bootsettings > ad sd dir and select the recovery folder with the files in it
magldr 2 boot ad sd
install the rom nativeSD
after reboot, magldr 10 services > 1. bootsettings > ad sd dir and select NativeSD
magldr 2 boot ad sd
profit?
Please do not post your questions in the development section any more, people will tend to either ignore you or flame you.
thanks for reply....r u sure there r 3 partitions..? Bec from the video tutorial by dxdy there r only 2 partitions(unallocated and fat32)...and there is no recovery folder or files.....in that video he only copy extracted rom files to sd card.....is ext4 really important?
i have also done the way you said it except ext4 partion.... downloaded the recovery twrp 2.2.2.0 leo sd.zip extracted it and put that folder in sd card with rom.zip ...then selected ad sd dir but there is no native sd option....after selecting boot ad sd still getting same error. It says 'sd kernel open failed'....plz guide me
kalpeshchavan said:
thanks for reply....r u sure there r 3 partitions..? Bec from the video tutorial by dxdy there r only 2 partitions(unallocated and fat32)...and there is no recovery folder or files.....in that video he only copy extracted rom files to sd card.....is ext4 really important?
Click to expand...
Click to collapse
Yes, for mac4a rom that you want to install, it must have an ext4 partition to install NativeSD.
The roms that dxdy was talking about are sd builds, which are now superceded by NativeSD.
You could just chose an [SD] build from http://forum.xda-developers.com/hd2-android/sd-dev if you don't want to run the risk of re-partitioning and losing your wp7, laptop or hard drive.
thanks alot for reply....as u said i have created fat32 of 1.69gb but dont show ext4 option it shows ext2 and ext3 so i selected ext3 of 1.45gb....will it make any difference? Can i continue with ext3?
Related
Hi,
I've just installed the imilka's RAM Desire HD v1.0 [A2SD][K:rafpigna 1.7
The problem is now that i made an ext4 partition of 1024 mb but not all my apps are going to my ext4 sd partition.
It seems that after he installed the apps they by half and a half to get the NAND memory and a half to the ext4 partition
also takes after installing an app my internal memory.
This is the manual i followed for installing my rom and make my partition.
From what I read you missed the step about creating a ext3 or ext 4 partition on your sd.
Download gparted live cd and burn it to a cd.
With sd card detected in Windows put in cd and reboot from cd.
Select sd card from top right and check carefully that you have chosen the correct sd!
Delete all partitions and then create fat32 with 1024 mb of free space after.
Then create ext4 partition (both primary)
Click apply.
Reboot normal.
Format Fat32 partition in Windows with 64k clusters.
Copy install files to sd.
Plug in SD and boot phone into magldr, select usb flasher.
Run daf.exe from downloaded zip.
Upon reboot hold power button and select ad recovery.
Choose install zip from sd and navigate to stockhdram1.zip.
If i follow this check on the following link i get a2sd: not found
nickescobedo.com/15/how-to-verify-a2sd-is-working-properly-the-easy-way
which version of the hd2 are you using? eu or tmous?
I'm using the eu version...
also if i go to root explorer and then to the folder:
"/sd-ext/app"
I can see there are a .apk files saved.
If i go to the next path i see the same apk files saved.
/data/app
sd-ext/app-privat is empty btw
Is it possible that he installed the apk files on both partitions?
Mine system memoy increased also after installing root explorer
Hello everyone,
I've an issue and I am looking for your advise & support. I've bought HTC HD2 512 EU with the following NAND specification:
Android ver: 2.2.1
Baseband ver: 15.42.50.11U_2.15.50.14
Kernel ver: 2.6.32.15-saint.J_Rev.005-g009fade-dirty [email protected] #8
Build no: Desire HD Rev.10.XU
Software no: 1.72.405.3
aMAGLDR V1.13
The Issue: I wanted to install App2SD to be able to install apps in SD Card.. I followed this thread => http://forum.xda-developers.com/showthread.php?t=926015 & followed Darktremor instructions here.. However, When I entered the MAGLDR menu /AD Recovery I found no CWM recovery mode "no boot source".. So what should I do next as Darktremor approach assumed that there is a CWM recovery mode to be able to format, partition and flash the App2SD, while I haven't!.. What should I do to make it work?
Thank you,
unzip attached file.put the folder you get to your sd card.in mgldr menu: services-boot settings-ad sd dir-find the folder and choose it. now you'll go to mgldr menu automatically now take the second choice:ad sd. so you'll go to ad recovery.(by this method you have to do all these steps each time in order to go ad recovery.so it is recommended to flash a recovery using daf and usb flasher.but this will erase your installed android rom.) and in ad recovery menu backup your current rom.because darktremors method doesn't go well with som roms.and know that it leads 2 extra reboots after you flash it.
mutil, thanks for the reply. I did as you mentioned.. got into the CWM successfully but failed to partition the SD correctly. After it said=> "Done..! partition SD successfully!" I got the screen full of errors like=>
E: Can't mount /cache/recovery/log
E: Falid to find "cache" partition to mount at "/cache".
E: Can't open /cache/recovery/last_log
E: Can't find misc
P.S: I choose partition size of 1024mb & swap of 256mb..
Update: I ignored those errors & installed the App2SD & rebooted but didn't notice any change! The available space on the internal storage still 201mb!.. SD card now reads 14gb, previously 15gb..
download a2sdgui from market. move dalvik cache to sd.this gives you some more space.i think a2sd will work for applications you install from now on.therefore i install it just after i installed a new rom.btw 256mb swap is high. you must know that it may harm your sd (but i also use 128mb swap in spite of its risk)
mutil said:
download a2sdgui from market. move dalvik cache to sd.this gives you some more space.i think a2sd will work for applications you install from now on.therefore i install it just after i installed a new rom.btw 256mb swap is high. you must know that it may harm your sd (but i also use 128mb swap in spite of its risk)
Click to expand...
Click to collapse
Done!..
Thank you mutil...
About the swap, do you suggest me to redo the whole process again and limit the swap to maybe 128mb?.. I remember that swap partition is always double the mem size..
What is the max recommended ext partition size for the App2SD? because on the CWM you can make the partition up to 2048mb..
no just for that, it doesn't worth to redo everything.next time when you change rom you arrange it.i dont have much knowledge but the swap is said to harm sd-card.but as my experience it also improves speed.
Ext
If u want to install apps on EXT partition don't use App2SD,or A2ext use Data2ext.
Similar to a2ext, where data/app were stored inside your ext partition of the SD card, data2ext stores the whole /data inside your ext partition.
That means your internal storage will barely be used, and because nowadays some SD cards runs faster than your internal memory.
Instructions:
*This is a CyannogenMod version!Not tested on DHD Roms!
1.Make a Ext3 Partition via CWR
2. Flash data2ext_for_CM via CWR (attached) (DON'T FLASH IT ON THE FIRST BOOT OF ANY ROM!)
3. Go to your terminal emulator/adb shell to type data2ext --enable
4. Reboot
5. Go check your Ext storage via Titanium Backup(Your internal storage [220 mb~] will not be increased you must check the ext space from the Overview page of your Titanium Backup [SD card(a2sd):....mb(...mb free)])!
antonymilo said:
If u want to install apps on EXT partition don't use App2SD,or A2ext use Data2ext.
Similar to a2ext, where data/app were stored inside your ext partition of the SD card, data2ext stores the whole /data inside your ext partition.
That means your internal storage will barely be used, and because nowadays some SD cards runs faster than your internal memory.
Instructions:
*This is a CyannogenMod version!Not tested on DHD Roms!
1.Make a Ext3 Partition via CWR
2. Flash data2ext_for_CM via CWR (attached) (DON'T FLASH IT ON THE FIRST BOOT OF ANY ROM!)
3. Go to your terminal emulator/adb shell to type data2ext --enable
4. Reboot
5. Go check your Ext storage via Titanium Backup(Your internal storage [220 mb~] will not be increased you must check the ext space from the Overview page of your Titanium Backup [SD card(a2sd):....mb(...mb free)])!
Click to expand...
Click to collapse
mmmm, will give it a try
Does it has a GUI?
Hallo friends,
I've read the threads and I could not find anything that may serve my problem. My htc hd2 says that there is not enought memorry all the time because of my "Internal memory". It is law than 14 mb and this causes me a lot of troubles. I've tried menu/settings/applications/manage applicantions BUT the problem is that my "move to SD card" is grayed and it could not be pressed. What shell I do?
Thank you in advance
Best wishes
Use a2sd do u know how to? Pm me if u don't know
Which rom r u using?
Sent from my HTC HD2 using xda premium
space
Thank you very much for your response. I PMed you and I hope that maybe I'll manage to fix my problem
sgftg said:
Hallo friends,
I've read the threads and I could not find anything that may serve my problem. My htc hd2 says that there is not enought memorry all the time because of my "Internal memory". It is law than 14 mb and this causes me a lot of troubles. I've tried menu/settings/applications/manage applicantions BUT the problem is that my "move to SD card" is grayed and it could not be pressed. What shell I do?
Thank you in advance
Best wishes
Click to expand...
Click to collapse
Have you got an EXT Partition on your SD card?
Nigeldg said:
Have you got an EXT Partition on your SD card?
Click to expand...
Click to collapse
No I don't. Will it help me?
sgftg said:
No I don't. Will it help me?
Click to expand...
Click to collapse
yes it does after you create it you can enable a2sd by the scripts then move all apps to sd
walidhazem said:
yes it does after you create it you can enable a2sd by the scripts then move all apps to sd
Click to expand...
Click to collapse
Thanks but how should I do that?
sgftg said:
Thanks but how should I do that?
Click to expand...
Click to collapse
you can partition your sd card within clockworkmod
TwanntasticSV said:
you can partition your sd card within clockworkmod
Click to expand...
Click to collapse
If Interested, I found there are guides on how to do this, i am not allowed to post links yet but search google for "partition clockworkmod" (without the quotes) and for me the guide i found was the first result (admittedly, google results vary by user).
sgftg said:
Thanks but how should I do that?
Click to expand...
Click to collapse
first partition your sd using this guide: http://www.youtube.com/watch?v=Cygl0qZnbaM
or in words:
1. Insert the memory card in card reader (don't use phone for partition making)
2. Open the "Partition Wizard"
3.Move/Resize Right-click on SDCard and choose Move / Resize
4.Select the partition size ((Don't have to format complete card just resize)
5.Confirm your choice to "OK"
6.Right-click on the unpartitioned space
7.Click "Create"
8. A warning message appears, click "Yes"
9.Choose "Create as Primary"
10.Patrition type Ext2
11.Cluster size 4Kb Cluster size 4Kb
12.click "Ok"
13.click "Apply"
14.Finish
15.Now you can insert the card into the phone
THEN
copy the a2sd scripts onto sd card and flash it through cwm
heres the thread:http://forum.xda-developers.com/showthread.php?t=926015 (a2sd thread)
THEN
enable a2sd using this: http://forum.xda-developers.com/showpost.php?p=16979976&postcount=552
pm me if u have problems
I have installed ICS 4.02 on SD and is working great. HTC HD2. Win 7.5 in NAND.
I have also done the EXT partition as suggested in this thread. However, when I open up file explorer it reports an error that Sd not found or installed or not mounted. Kindly help.
Thank you for all the guides here, it has been a fantastic job.
I ve installed data2sd V5 with clk and it works great!
1. greate data partition on sd
2. Flash Rom
3. Flash Kernel
4. Boot the Rom up, but don't login to any account (google, ...) - reboot to CWM
5. flash Data2SDInstaller
6. Boot the Rom up
Update the Rom version:
1. flash rom
2. flash kernel
3. flash data2sd-Reinstall
4. boot up the rom
walidhazem said:
first partition your sd using this guide: http://www.youtube.com/watch?v=Cygl0qZnbaM
or in words:
1. Insert the memory card in card reader (don't use phone for partition making)
2. Open the "Partition Wizard"
3.Move/Resize Right-click on SDCard and choose Move / Resize
4.Select the partition size ((Don't have to format complete card just resize)
5.Confirm your choice to "OK"
6.Right-click on the unpartitioned space
7.Click "Create"
8. A warning message appears, click "Yes"
9.Choose "Create as Primary"
10.Patrition type Ext2
11.Cluster size 4Kb Cluster size 4Kb
12.click "Ok"
13.click "Apply"
14.Finish
15.Now you can insert the card into the phone
THEN
copy the a2sd scripts onto sd card and flash it through cwm
heres the thread:http://forum.xda-developers.com/showthread.php?t=926015 (a2sd thread)
THEN
enable a2sd using this: http://forum.xda-developers.com/showpost.php?p=16979976&postcount=552
pm me if u have problems
Click to expand...
Click to collapse
Thank you very much but I will need help with step 2 and 3
-THEN
copy the copy the a2sd scripts onto sd card and flash it through cwm
heres the thread:http://forum.xda-developers.com/showthread.php?t=926015 (a2sd thread))
-THEN
enable a2sd using this: http://forum.xda-developers.com/showpost.php?p=16979976&postcount=552
Ok first download this zip(the script): http://attachments.xda-developers.com/attachment.php?attachmentid=763776&d=1319771608
now copy the zip onto your sd then put it back in your phone and hold the endcall button until you see magldr options and then go down to ad recovery and when it opens go to install zip from sd using volume up + down and call button for select, now choose the zip and install it, its gonna do stuff leave it till its done, once its done go back and reboot. now go to market and install terminal emulator and open and type the following:
su
cd sdcard
sh a2sd_enabler.sh
then reboot
and you can move almost all apps to sd
if this doesnt work please follow this after copying the zip onto sd card: http://forum.xda-developers.com/showpost.php?p=16979976&postcount=552
hope it works, tell me what happens with you
Sent from my HTC HD2 using xda premium
walidhazem said:
first partition your sd using this guide: http://www.youtube.com/watch?v=Cygl0qZnbaM
or in words:
1. Insert the memory card in card reader (don't use phone for partition making)
2. Open the "Partition Wizard"
3.Move/Resize Right-click on SDCard and choose Move / Resize
4.Select the partition size ((Don't have to format complete card just resize)
5.Confirm your choice to "OK"
6.Right-click on the unpartitioned space
7.Click "Create"
8. A warning message appears, click "Yes"
9.Choose "Create as Primary"
10.Patrition type Ext2
11.Cluster size 4Kb Cluster size 4Kb
12.click "Ok"
13.click "Apply"
14.Finish
15.Now you can insert the card into the phone
THEN
copy the a2sd scripts onto sd card and flash it through cwm
heres the thread:http://forum.xda-developers.com/showthread.php?t=926015 (a2sd thread)
THEN
enable a2sd using this: http://forum.xda-developers.com/showpost.php?p=16979976&postcount=552
pm me if u have problems
Click to expand...
Click to collapse
I did everything but there is a problem???I put the a2sd file on the card, card in the phone and opened the a2sd.rar file, than rebooted but NOW the phone loads only to the android wallpaper and nothing more?? what shell I do???
people who does not understand the installation method of native sd please follow these steps
create ext 4 partition of minimum 512mb
1.unzip the recovery zip file from this link (http://goo.im/devs/Xylograph/Various/Recoveries) copy zimage & intrid file from recovery and paste these files on root of your sd card
2.go to magldr menu and 2 nd option (ad sd) then press call button
3.then it will take you to recovery mode
4.flash the rom(paranoid 1.99 or 2)
5.after that your sd card will have folder called nativesd click on folder inside there will be one more folder pa
6.copy zimage & intrid files
7. before that delete the zimage & intrid files of recovery from root of your sd card
8.paste the zimage & intrid files of pa
9.reboot
THANKS TO SECURECRT,XYLOGRAPH,PHO3NIX,COTULLA,TYTUNG
Can I make a ext4 partition on my sdcard w/o PC as I've currently a company laptop only which doesn't allow to install any partition tool??
Cheers.....LinChina
LinChina said:
Can I make a ext4 partition on my sdcard w/o PC as I've currently a company laptop only which doesn't allow to install any partition tool??
Cheers.....LinChina
Click to expand...
Click to collapse
you can use PartitionWizard to make ext4 partition on sd card
anhnq said:
you can use PartitionWizard to make ext4 partition on sd card
Click to expand...
Click to collapse
he can't install that warez in his PC/ NB.
@LinChina
i think recovery(CWM) only makes EXT3 but i'm not really sure about that, your best bet is use a pc that can have those warez on it
or this, if you can place & unzip the file in your NB
3a Use the provided 4EXT recovery (NAND or SD version) to create the partitions and format them.
Click to expand...
Click to collapse
NativeSD Dual Installer v2
http://forum.xda-developers.com/showpost.php?p=31110719&postcount=2
Now I know ..but the first post is for people who don't have magldr or android on nand....SD recovery is not needed when you have cwm recovery inbuilt in magldr
Easy steps
1. Use minitool partition manager on PC to make sdext4 partition (cwm makes only ext3 ..so is not useful)
2. Copy your favorite native SD rom zip folder to SD card
3. In magldr ..go to ad recovery..install zip from SD...then follow instructions ..default path install is SD ext
4. Reboot
Enjoy
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Hi everyone, it only looks that I'm a new user, it's because i've never posted anything before. I have Hd2 for almost 2 years from now and like 1,5 year being passive user on XDA. Anyway I do have problems that i can't manage myself. OP asked a dumb question, only if he has Android Nand or Windows Mobile, however... nobody ever tried making it work with WP7? I've been working on it few hours and don't have a clue how to do it. I've deleted my FAT32 partition and split it into Fat32+Ext4. If EXT is logical, WPH boots and show "Storage Card not working", but if it's primary it doesn't even boot. Is there anyway to solve this thing? Any help much appreciated, thanks.
maykel. said:
Hi everyone, it only looks that I'm a new user, it's because i've never posted anything before. I have Hd2 for almost 2 years from now and like 1,5 year being passive user on XDA. Anyway I do have problems that i can't manage myself. OP asked a dumb question, only if he has Android Nand or Windows Mobile, however... nobody ever tried making it work with WP7? I've been working on it few hours and don't have a clue how to do it. I've deleted my FAT32 partition and split it into Fat32+Ext4. If EXT is logical, WPH boots and show "Storage Card not working", but if it's primary it doesn't even boot. Is there anyway to solve this thing? Any help much appreciated, thanks.
Click to expand...
Click to collapse
You can use the same link as 2 post before yours and check the section about "NativeSD Installation for Magldr NAND Android & WP7 users".
http://forum.xda-developers.com/showpost.php?p=31110719&postcount=2
@mengfei.....just downloaded and will try and feedback if succeded.......hopefully :laugh:
Edit1: Thanks a lot mengfei.....EXT4 created....now will try one of the natives sd
Edit2: "Aokp Nightly 04-09-2012" run sooooooooooo fast!!!!!
Cheers.....LinChina
^ Glad to know you got it working :highfive:
I like to try nativeSD Android roms, but with MAGLdr it runs into a deadlock as MAGLdr does not support WinMo 6.5.
Is there a way to use NativeSD? even better with multiboot?
Hi at all,
today I installed ACA NativeSD on partition EXT4 into my sd card. I copy and paste the 2, zImage, intrid file which I fund in NativeSD/ACA folder, into root of my sd card. I rebooted and when I choose Boot AS SD in MAGLDR the ROM do not boot.
What I do wrong?
eclyptos said:
Hi at all,
today I installed ACA NativeSD on partition EXT4 into my sd card. I copy and paste the 2, zImage, intrid file which I fund in NativeSD/ACA folder, into root of my sd card. I rebooted and when I choose Boot AS SD in MAGLDR the ROM do not boot.
What I do wrong?
Click to expand...
Click to collapse
you must copy the 2 files from "<SDCARD>/NativeSD/ACA" to "<SDCARD>/NativeSD" (and not to "<SDCARD>/" )
Sent from my HTC HD2 using xda app-developers app
o82239 said:
you must copy the 2 files from "<SDCARD>/NativeSD/ACA" to "<SDCARD>/NativeSD" (and not to "<SDCARD>/" )
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
but I got already 2 file in there (zImage & intrid), do I have to relace them? Anyway if I try to set up the AD SD Dir from Magldr I do not see the NativeSD folder so will not boot anyway. I think I have problems with 4EXT but I am not sure.
eclyptos said:
but I got already 2 file in there (zImage & intrid), do I have to relace them? Anyway if I try to set up the AD SD Dir from Magldr I do not see the NativeSD folder so will not boot anyway. I think I have problems with 4EXT but I am not sure.
Click to expand...
Click to collapse
yes, you must replace the 2 files...
why you can't see the folder: check on a PC, if the folder has hidden attribute... or try to create a new folder, copy all files from the old to the new, delete old and rename new folder...
Sent from my HTC HD2 using xda app-developers app
o82239 said:
yes, you must replace the 2 files...
why you can't see the folder: check on a PC, if the folder has hidden attribute... or try to create a new folder, copy all files from the old to the new, delete old and rename new folder...
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
ok, I will replace them.
Why I do not see the folder? I ask my self the same question and I don't know why, anyway my card is recognized and the folder is there, if will be hidden I will not see the folders, I also put different card into my hd2 with different folders and still the same. I think the 4EXT recovery make something wrong with partitions or I do.
LinChina said:
Can I make a ext4 partition on my sdcard w/o PC as I've currently a company laptop only which doesn't allow to install any partition tool??
Cheers.....LinChina
Click to expand...
Click to collapse
you may partition your sd card by this way
backup your data first, reboot into recovery, choose option 8. ad recovery => advance => partition sd card, choose your own option and wait
dxdy, i hv followed ur video tutorial for dual boot....wp7 works gud but whenever trying to boot android kitkat, i got error kernal fail to open...i m using mac4a rom by maxs....wil u plz help me?
kalpeshchavan said:
dxdy, i hv followed ur video tutorial for dual boot....wp7 works gud but whenever trying to boot android kitkat, i got error kernal fail to open...i m using mac4a rom by maxs....wil u plz help me?
Click to expand...
Click to collapse
I think you will need to create an Ext4 partition of at least 1Gb on your Fat32 partition, either with minitool partition wizard or use Extended TWRP as your recovery.
my tut is too old from times when android run from FAT32 sdcard...
for nand version procedure is different and i not make tut for that
i sold my HD2 two years ago and since then i cant test this options....
THIS IS ONLY FROM MY MEMORY (maybe i write something wrong or forgot some steps)
for NAND ROM installation you need 4EXTRecovery for SDcard... not sure for complete procedure but first make WP7 partition (look my old tut) and rest left for android...
put 4EXTRecovery on SDcard (for example in A folder)
boot to magldr
10.Services, 1.BootSettings, 3.AD SD Dir, select "A"
10.Services, 1.BootSettings, 1.Boot source, 1. Android from SD
2.Boot AD SD
wait to load 4EXTRecovery
advanced - Partition SD card
select minimum 512 mb, this is EXT4 partition for system, rest of memory if you want is FAT32
2nd sd-ext skip
swap skip
Yes - I'm sure
EXT4
wait format to complete
red button to back to main menu when format complete...
now is ready to install ROM...
togle usb storage (in 4EXTRecovery)
copy ROM in zip file to SDcard
Next, Next, Agree, Next - Install on NativeSD/semi NativSD - Format (yes)
RMNET Connection
select options you want, after restart when boot to magldr just select which system you want boot
10.Services, 1.BootSettings,
thanks for this....dual boot hd2 finaly succeded
ur video tut is still useful....thanks alot