Dears,
my device runs Lollipop and it's rooted using CF-root.
Whenever I try to encrypt it, it reboots into Samsung's logo, then reboots again without to encrypt.
Can anybody get rid of this?
Thanks!
ultradj83 said:
Dears,
my device runs Lollipop and it's rooted using CF-root.
Whenever I try to encrypt it, it reboots into Samsung's logo, then reboots again without to encrypt.
Can anybody get rid of this?
Thanks!
Click to expand...
Click to collapse
Have you tried this method to encrypt?
http://forum.xda-developers.com/showpost.php?p=56037508&postcount=21
Let me know if this works.
alphahere said:
Have you tried this method to encrypt?
http://forum.xda-developers.com/showpost.php?p=56037508&postcount=21
Let me know if this works.
Click to expand...
Click to collapse
Dear,
I can't because I encrypted in this way:
Restore stock kernel (no wipe)
Encrypt
Flash CF-root
With this procedure I did not loose any data and it perfectly works rooted and encrypted.
Bye.
Related
Hi
I'm having issues with my I9505 Galaxy S4. The phone was rooted and after trying a few ROMs (Omega) etc I returned to a NAND backup with was basically rooted stock (via TWRP). Over the weekend strange lock-ups kept happening and I keep getting - Process System isn't responding. When I try and make a call the phone either reboots and hands for a minute and returns that error. This morning I have flashed via ODIN a rooted stock rom then a standard stock ROM - both do not fix the issues, I still have the same errors which is odd.
Can anyone make any suggestions ?
Thanks, Nick
NickBeswick said:
Hi
I'm having issues with my I9505 Galaxy S4. The phone was rooted and after trying a few ROMs (Omega) etc I returned to a NAND backup with was basically rooted stock (via TWRP). Over the weekend strange lock-ups kept happening and I keep getting - Process System isn't responding. When I try and make a call the phone either reboots and hands for a minute and returns that error. This morning I have flashed via ODIN a rooted stock rom then a standard stock ROM - both do not fix the issues, I still have the same errors which is odd.
Can anyone make any suggestions ?
Thanks, Nick
Click to expand...
Click to collapse
bump
NickBeswick said:
bump
Click to expand...
Click to collapse
did you try wiping data and cache??
samersh72 said:
did you try wiping data and cache??
Click to expand...
Click to collapse
Yes many times
NickBeswick said:
Yes many times
Click to expand...
Click to collapse
if you are rooted, flash custom recovery, format system via recovery, then flash a custom rom or stock firmware.
samersh72 said:
if you are rooted, flash custom recovery, format system via recovery, then flash a custom rom or stock firmware.
Click to expand...
Click to collapse
Hi - thanks for the information but again I have already tried this a few times.
Nick
NickBeswick said:
Hi
I'm having issues with my I9505 Galaxy S4. The phone was rooted and after trying a few ROMs (Omega) etc I returned to a NAND backup with was basically rooted stock (via TWRP). Over the weekend strange lock-ups kept happening and I keep getting - Process System isn't responding. When I try and make a call the phone either reboots and hands for a minute and returns that error. This morning I have flashed via ODIN a rooted stock rom then a standard stock ROM - both do not fix the issues, I still have the same errors which is odd.
Can anyone make any suggestions ?
Thanks, Nick
Click to expand...
Click to collapse
Sorry, just saw that you did all these already.
You have to be VERY careful. It is already reported that the wipe in TWRP might screw things up.
So, I recommend you that you install a prerooted stock ROM, and the stock recovery. Then do a factory reset (from the phone!).
ROM: Cloudy G3 2.0 (already posted in his thread)
Recovery: Team Win recovery v2.7.0.0
Whenever I attempt to Full Phone Encrypt it will reboot and stay at 0%. I've tried it a few times now.
It will let me reboot back to the OS so it's not even doing anything.
Due to Recovery/rom? I'd like full encryption...
Thanks for help.
@Unoid I think its the rom, but I am not sure about recovery. Also remember that if encryption fails during encrypting then bad things happen to your data. And also if you are flashing much roms then I suggest to not to encrypt, just use an password.
What stable rom will work with encryption?
I'm in the same boat -- encrypting stays at 0% and rebooting starts up normally like nothing happened. Any luck finding a stable ROM where encryption works?
Unoid said:
What stable rom will work with encryption?
Click to expand...
Click to collapse
boffo123 said:
I'm in the same boat -- encrypting stays at 0% and rebooting starts up normally like nothing happened. Any luck finding a stable ROM where encryption works?
Click to expand...
Click to collapse
Did you guys ever find a ROM that will work with encryption?
bamachevrolet said:
Did you guys ever find a ROM that will work with encryption?
Click to expand...
Click to collapse
I went back to the stock KitKat ROM. I'd still be interested in hearing if anyone gets encryption working on a custom ROM though.
I would be very interested to know a custom AOSP ROM with Encryption as well. I know it works for other phones. Is it specific to the kernal?
Just got a little update
How to install this patch update on rooted phone? Is it possible to make a stock recovery and unroot without losing any of data?
Thanks
Hitman said:
Just got a little update
Click to expand...
Click to collapse
I did try to install it, the file downloaded and phone rebooted... then Prince's recovery screen loaded up, forgot I rooted the phone the other day using his excellent "Lenovo K3 Note Manager" tool
I might unroot my phone another day and try to install it again. The only thing bugging me about the marshmallow update is a problem I'm having with bluetooth streaming, songs aren't resuming when I disconnect/reconnect they restart. I doubt this update will fix it anyway, from what I've read it might have to wait until 6.0.1 is released..
crh66 said:
I might unroot my phone another day and try to install it again......
Click to expand...
Click to collapse
Did you unroot your phone using a fabulous Lenovo K3 Note Manager 3.0? What about replacing TWRP with stock recovery? Does Note manager replace it automaticaly?
Thanks a lot, A.
pentaxon said:
Did you unroot your phone using a fabulous Lenovo K3 Note Manager 3.0? What about replacing TWRP with stock recovery? Does Note manager replace it automaticaly?
Click to expand...
Click to collapse
I used version 3 to root the phone, but I haven't tried unrooting it yet.
After update the wifi is very stable and i am getting the full bandwidth that my ISP provide.
Any way this update can be packaged as an update.zip ??
My phone is rooted and on TWRP (s422 clean rom)... I would rather not unroot, and redo the stock recovery, just for this update, but I am getting data connection drops after power cycling.
Phat Phreddy said:
Any way this update can be packaged as an update.zip ??
My phone is rooted and on TWRP (s422 clean rom)... I would rather not unroot, and redo the stock recovery, just for this update, but I am getting data connection drops after power cycling.
Click to expand...
Click to collapse
Use this Slick S424 ROM: http://www.needrom.com/download/slick-s424-row/
Make a complete backup via TWRP and follow the instructions below, than restore only data partitions you made before. Works like a charm
Thanks... Did that (not seamlessly) and its currently just updating my apps..
Phat Phreddy said:
Thanks... Did that (not seamlessly) and its currently just updating my apps..
Click to expand...
Click to collapse
After updating, I found some issues. One of them is Ebay client - does not work anymore :crying:
Isn't there a way to replace the updater script from the original lenovo 4mb 424 update with a modified one so it works with TWRP?
But how sir give me updater scripts
I just flashed the s424 TWRP backup over my S422.. worked fine.. Kept root and TWRP.
Hitman said:
After update the wifi is very stable and i am getting the full bandwidth that my ISP provide.
Click to expand...
Click to collapse
So was your phone rooted?
Did you lose the root access after updating or was it still there? AFAIK this update shouldn't do anything to root, but you can never tell
Phat Phreddy said:
I just flashed the s424 TWRP backup over my S422.. worked fine.. Kept root and TWRP.
Click to expand...
Click to collapse
What did you use to flash over TWRP? did you modify update script inside the update file?
http://www.needrom.com/download/slick-s424-row/
shinudgr8 said:
So was your phone rooted?
Did you lose the root access after updating or was it still there? AFAIK this update shouldn't do anything to root, but you can never tell
Click to expand...
Click to collapse
I was on stock Indian ROM and not rooted.
http://en.miui.com/thread-492490-1-1.html
Has anyone installed this thing? I don't know which one should I put on my phone. Everytime I want to return to MIUI phone gets stuck on bootloop, forcing me to use cable with switch to unbrick it. I think it happens because of encryption. And since this is my first Xiaomi phone I don't know where to check if my phone is encrypted. Help me.
You have to disable DM-Verify in Advanced in TWRP before boot
toji12 said:
You have to disable DM-Verify in Advanced in TWRP before boot
Click to expand...
Click to collapse
Before booting new ROM, right ?
Yep
toji12 said:
Yep
Click to expand...
Click to collapse
But now phone wants some password.
Your phone is encrypted?
Maybe your phone is encrypted by you. There is a function to encrypt all the data on your phone using a password.
Well I have no problem flashing stock rom back, but everytime I flash TWRP it seems to just want to go in a bootloop. I have G928R4 USC on 7.0, every time I restart the phone it just bootloops. I can access TWRP but when I reboot it pulls that crap -_- Please help. Thank you
Tokumei no said:
Well I have no problem flashing stock rom back, but everytime I flash TWRP it seems to just want to go in a bootloop. I have G928R4 USC on 7.0, every time I restart the phone it just bootloops. I can access TWRP but when I reboot it pulls that crap -_- Please help. Thank you
Click to expand...
Click to collapse
You use the latest twrp??
dizio said:
You use the latest twrp??
Click to expand...
Click to collapse
Yes on the latest twrp. Idk what the issue is.
Would it be because I'm on 7.0? Idk if that's a thing but I would assume it wouldn't be the case.
https://twrp.me/devices/samsunggalaxys6edgeplus.html
Are you using the one for your device from here?
There are 2 variants of the SM-G928R4
kdogguk said:
https://twrp.me/devices/samsunggalaxys6edgeplus.html
Are you using the one for your device from here?
There are 2 variants of the SM-G928R4
Click to expand...
Click to collapse
Yes I'm sure I'm using the right one for my device. I have never had this issue before.
Went back to twrp 3.0.2.0 and it's fine, I guess it was just the latest release that was the issue.
Wu
Root
Tokumei no said:
Well I have no problem flashing stock rom back, but everytime I flash TWRP it seems to just want to go in a bootloop. I have G928R4 USC on 7.0, every time I restart the phone it just bootloops. I can access TWRP but when I reboot it pulls that crap -_- Please help. Thank you
Click to expand...
Click to collapse
Root it first
unbelievable i did a hard reset , then clear cache , before was random reboot , now it became worse and constant boot loop ,does replugging the battery solve this issue ?