here is the screen of my L7 LG-P705 and it is stuck at 4%
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the LOG when I tried to use KDZ Flasher
[R&D Test Tools Log File]
11:22:49 : Launching SW update
11:22:49 : Unpacking KDZ
11:22:55 : KDZ file extraced
11:23:00 : Files were extracted.
11:23:00 : LGMobileDL Load.
11:23:00 : Port = -1
11:23:00 : Connecting to phone
11:23:10 : Check Phone mode = 1
11:23:28 : Phone type check.......
11:23:28 : LGMobileDL.DLL Loading....
11:23:28 : _SetAuthMark Ok : wAuthMark(1224)
11:23:28 : _DetachDLL Call
11:23:28 : _DetachDLL Call End
11:23:28 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\DZ_LGP705AT-00-V20c-AME-XX-DEC-15-2014+0.dz
11:23:28 : Param : moduleDir =
11:23:28 : Param : waitTime = 0
11:23:28 : Param : UsbHighSpeed = 1
11:23:28 : Param : PhoneMode = 1
11:23:28 : Param : BinVersion = V20C_00
11:23:28 : Param : AuthMark = 1224
11:23:28 : Call fn_StartUpgrade
11:23:28 : 3GQCT : wParam = 4, lParam = 0
11:23:28 : Step Complete : DLOAD Change
Click to expand...
Click to collapse
I think @Paget96 or @vaikz can help with L7
Sent from my IdeaTab A2107A-F using XDA Free mobile app
droidxx9 said:
I think @Paget96 or @vaikz can help with L7
Sent from my IdeaTab A2107A-F using XDA Free mobile app
Click to expand...
Click to collapse
Yeah I hope they can help me
@amnher.
I'm into quite similar problem dude..
Though I have successfully flashed the V10B_00 firmware for my L7 p705, it went bootloop. I have done it twice already.
Can anybody help me?
Is there anything else I can do to unbrick my L7 by not using the LG Mobile Support Tool cause it's such a hassle. I need to wait for more than an hour and it needs sufficient internet connection..
WHats weird is that after my phone goes to emergncy mode, it goes like that after about 5 seconds on screen
amnher said:
WHats weird is that after my phone goes to emergncy mode, it goes like that after about 5 seconds on screen
Click to expand...
Click to collapse
did you try to flash kdz despite the white screen?
Sent from my LG-P705
Nesh89 said:
did you try to flash kdz despite the white screen?
Sent from my LG-P705
Click to expand...
Click to collapse
Yes and KDZ does not respond even after 10min. no changes with the log
deleted
Hope someone can help
@amnher
I deleted my 1st post as i thought it was a bummer.
But bro, If kdz updater didn't give you the desired effect, then there's no other way you can revive your phone but to use the lg mobile support tool. It's an official flasher, no reason to fail you. So try it again
Install the b2cappsetup.exe
Install your device driver
Turn off phone completely. You can take out its battery to make it sure
Hold vol + and connect it to your pc
(If driver is properly installed the program will recognize your device and its current firmware)
And if it says you're already on the latest firmware click on "upgrade recovery"
Do not interrupt the process. Usually the whole process takes up to 1 hour depending on your internet speed. So you just have to be patient:thumbup:
Tool: http://lg-support-tool.en.lo4d.com/
Driver: http://singledrivers.blogspot.com/2013/11/lg-optimus-l7-p700-usb-driver-for.html?m=1
the phone is not detected on emergency mode
there is no response from the Device Manager but when I turn it on the device manager will react
I followed this
http://androidforums.com/threads/stuck-in-emergency-mode-cant-use-lg-support-tool.81055/
Click to expand...
Click to collapse
I disabled the LG Modem one and the flashing continued finally!!!
amnher said:
Hope someone can help
Click to expand...
Click to collapse
This may help you
http://forum.xda-developers.com/optimus-l3-l5-l7/help/help-soft-brick-l7-p705-t3005240
Related
My phone is stuck in download mode, need help, fast
I have tried to hard reset it, to flash it even, but KDZ gets frozen when I try tu plug in the phon, regarless of the status (with battery and mem. card or without).
Please advice ???
antimulte said:
My phone is stuck in download mode, need help, fast
I have tried to hard reset it, to flash it even, but KDZ gets frozen when I try tu plug in the phon, regarless of the status (with battery and mem. card or without).
Please advice ???
Click to expand...
Click to collapse
Send a screenshot where the KDZ get frozen.
LeoPosas said:
Send a screenshot where the KDZ get frozen.
Click to expand...
Click to collapse
mainly the entire application gets stuck, or it says phone not found, I have tried on 3 different computers, xp and W7. (sorry4my english)
After many other drivers, I get this from KDZ
23:32:56 : Launching SW update
23:32:56 : Unpacking KDZ
23:32:59 : KDZ file extraced
23:33:02 : Files were extracted.
23:33:02 : LGMobileDL Load.
23:33:02 : Port = -1
23:33:02 : Connecting to phone
23:33:13 : Check Phone mode = 1
23:33:30 : Phone type check.......
23:33:35 : LGMobileDL.DLL Loading....
23:33:35 : _SetAuthMark Fail
23:33:35 : AuthMark°ˇ Á¤Č®Č÷ Phoneżˇ Write µÇÁö ľĘľŇ˝Ŕ´Ď´Ů!
23:33:35 : _SetAuthMark Fail
23:33:35 : LoadCDMAPhoneData() Error
23:33:35 : _DetachDLL Call
23:33:35 : _DetachDLL Call End
23:33:35 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\DZ_GT540AT-00-V20a-APP-XX-OCT-05-2010+0.dz
23:33:35 : Param : moduleDir =
23:33:35 : Param : waitTime = 0
23:33:35 : Param : UsbHighSpeed = 1
23:33:35 : Param : PhoneMode = 1
23:33:35 : Param : BinVersion = V20A_00-EuropeOpen
23:33:35 : Param : AuthMark = 0
23:33:35 : Call fn_StartUpgrade
23:33:50 : Smart : wParam = 3, lParam = 0
23:33:50 : Smart : wParam = 205, lParam = 0
and then it stays like this forever.
Advices?
PLEASE HELP
Aren't any orher way to get over the DOWNLOAD MODE, except KDZ?
SOLVED
Issue solved, THANKS TO LEO POSAS. :laugh:
antimulte said:
Issue solved, THANKS TO LEO POSAS. :laugh:
Click to expand...
Click to collapse
how???
hy
rocky_ofk said:
how???
Click to expand...
Click to collapse
just send a PM to leo, he can help you.
Please Share
Hi could you please share the fix im now experiencing the same issue with my one and need to fix it
Many thanks
Hello. I ahve the same problem. My GT540 stuck at Downloiad mode. I cant enter recovery and anythink. Just after using combo buttons or power it goes to download. I used KDZ to install some rom and it passed but after reboot still download mode. Can anyone help me?
KDZ Error - LG Optimus GT540
antimulte said:
My phone is stuck in download mode, need help, fast
I have tried to hard reset it, to flash it even, but KDZ gets frozen when I try tu plug in the phon, regarless of the status (with battery and mem. card or without).
Please advice ???
Click to expand...
Click to collapse
My problem is the KDZ updater. The KDZ is not found my GT540. I'm see at:
[R&D Test Tools Log File]
12:19:49 : Launching SW update
12:19:49 : Unpacking KDZ
12:19:50 : KDZ file extraced
12:19:52 : Files were extracted.
12:19:52 : LGMobileDL Load.
12:19:52 : Port = -1
12:19:52 : Connecting to phone
12:19:52 : PHONE WAS NOT FOUND!
12:19:54 : ===FINISHED===
Please help me. What am I doing?
The phone was bricked.
Hello, i failed to flash v10k_00, rooted, unlocked bootloader and CWM ror throght KDZ.
It shows:
18:46:47 : Launching SW update
18:46:47 : Unpacking KDZ
18:48:34 : KDZ file extraced
18:49:57 : Files were extracted.
18:49:57 : LGMobileDL Load.
18:49:57 : Port = -1
18:49:57 : Connecting to phone
18:50:06 : Check Phone mode = 2
18:50:23 : Phone type check.......
18:50:29 : _DetachDLL Call
18:50:29 : _DetachDLL Call End
18:50:29 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\LGP700AT-ROOT-CWM-NewBoot-00-V10k-EUR-XX-FEB-22-2013+0.dz
18:50:29 : Param : moduleDir =
18:50:29 : Param : waitTime = 0
18:50:29 : Param : UsbHighSpeed = 1
18:50:29 : Param : PhoneMode = 2
18:50:29 : Param : BinVersion = V10K_00
18:50:29 : Param : AuthMark = 0
18:50:29 : Call fn_StartUpgrade
18:50:30 : CDMA: wParam = 206, lParam = 0
18:50:30 : Model Dll Msg Not Found(206, 0)
What should i do to flash this success ?
Sorry for bad english.
faters said:
18:50:30 : Model Dll Msg Not Found(206, 0)
Click to expand...
Click to collapse
Those errors are normal, let it finish, it will reboot the phone automatically.
Ok, ill try one more time
same problem and i wait about 10-15min and nothing happen with my phone
UNOSlv said:
same problem and i wait about 10-15min and nothing happen with my phone
Click to expand...
Click to collapse
What phone do you have? I have a L3.Did you try flashing without the battery in your phone. Also what mode are you using diag or emergency
FlowUK said:
What phone do you have? I have a L3.Did you try flashing without the battery in your phone. Also what mode are you using diag or emergency
Click to expand...
Click to collapse
I have L7 , i am using emergency mode and i try one time flash without battery
Hello!
I've spent too many hours trying to figure this out, now I'm becoming hopeless! :crying:
No matter what settings I try on the KDZ update, I always end up on this error:
Code:
10:04:34 : Launching SW update
10:04:34 : Unpacking KDZ
10:04:55 : KDZ file extraced
10:05:30 : Files were extracted.
10:05:30 : LGMobileDL Load.
10:05:30 : Port = -1
10:05:30 : Connecting to phone
10:05:44 : Check Phone mode = 1
10:06:06 : Phone type check.......
10:06:34 : BinPath is a empty!!
10:06:34 : _DetachDLL Call
10:06:39 : _DetachDLL Call End
10:06:39 : Param : Path =
10:06:39 : Param : moduleDir =
10:06:39 : Param : waitTime = 0
10:06:39 : Param : UsbHighSpeed = 1
10:06:39 : Param : PhoneMode = 1
10:06:39 : Param : BinVersion = V10D_00
10:06:39 : Param : AuthMark = 0
10:06:39 : Call fn_StartUpgrade
10:07:11 : CDMA: wParam = 100, lParam = 0
10:07:11 : Step : Upgrade Error2 - Error Code : 0
10:07:11 : ResetStartInfo() Call
10:07:11 : _DetachDLL Call
10:07:16 : _DetachDLL Call End
10:07:16 : FreeLibrary Call
10:07:16 : FreeLibrary Call End
10:07:16 : ResetStartInfo() Call End
10:07:16 : ===FINISHED===
10:07:19 : OnModelDllMsg(OnMsgFromModelDll-CDMA) delete m_pLGCyonUpdate
It is interesting that it says "CDMA: wParam = 100, lParam = 0", although for other people it says "3GQCT: wParam = 100, lParam = 0", even though I set it to 3GQCT, my error includes the word CDMA instead.
Also, I'd like you to tell me if that's right: "Check Phone mode = 1", shouldn't it be "2"? I turn off the phone and connect it to the PC with the "- volume" pressed down. Then a black screen appears with the words "Download Mode".
Thank you!
And BTW, if I run it as administrator, it won't even decrypt the KDZ:
Code:
13:26:08 : Launching SW update
13:26:08 : Unpacking KDZ
13:26:21 : kdz decrypt error.
13:26:21 : Extract file error
13:26:23 : ===FINISHED===
Have you install Install MSXML 4.0 SP3 Parser (msxml.msi) or you can see here http://forum.xda-developers.com/showthread.php?t=1060121
george brown said:
Have you install Install MSXML 4.0 SP3 Parser (msxml.msi) or you can see here http://forum.xda-developers.com/showthread.php?t=1060121
Click to expand...
Click to collapse
Ah, yes, I have tried everything from a lot of tutorials.
teresaejunior said:
Ah, yes, I have tried everything from a lot of tutorials.
Click to expand...
Click to collapse
Try another rom which is compatible with your phone. Download KDZ updater from another source. You might also try flashing KDZ from another computer.
Samsung s3 i9300 & Note2 N7100 & i9500 s4 Dead boot solution & imei null solution s3
Samsung s3 i9300 & Note2 N7100 & i9500 s4 Dead boot repair solution & imei null solution only for i9300
Procedure:
* Download samsung s3 boot card maker Here
* Extract it on desktop
* Take a card reader insert memory card into the card reader nd connect it to the pc
* From the extracted folder run Diskdump2.exe
* Select generic storage Device. pictures below follw it
* Now to write the scripts folle the below given picr
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now done yu are succesfully created Dead boot memorycard
To continue further
Requerments:
* Z3X samsung Box or SPT Box (i used z3x)
* special UART Cable (300k or 500k uartcable)
* Download teraterm-4.78 From Here
* Fully charged battery
Dead boot Reapairing procedure
* Download nd extract teraterm-4.78 on desktop
* From extracted folder run ttermpro.exe there select serial port nd change the serial port to z3x serial
port lik below givin in the picr
*After Select The Serial Port Press Ok Button den Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button lik below givn in the picr
* Now insert the created boot card to the mobile
* Connect the Uart cable via z3x box
* Now Insert the battery nd wait for 5min if the procces didnt start discnnt the mobile close ttermpro agin try it.
* if it run success yu vil the result below given lik this.
pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: battery is not detected, do not init fuelgauge
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x10
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0x2
PMIC_IRQ1 = 0x27
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=d1b0f038
microusb_get_attached_device: STATUS1:0x3c, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw 'download_error.jpg'...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: 'download_error.jpg' j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
a2, 60, 90,
Click to expand...
Click to collapse
* if yu get this error at the end [Patch Stop] This is not Rom Code. yu cant fix yur mobile yu have to change yur emmc chip
TN default
<OK>
<OK>
[DVFS] INT(1) : 0
DRAM Type : LPDDR2 8G
[DVFS] MIF(3) : 0
[EPLL][VPLL][CLK_DIV] OK
<OK>
[LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0
[DVFS] ARM(0) : 5
[DVFS] INT(1) : 0
[DVFS] G3D(2) : 0
[DVFS] MIF(3) : 0
[SD_INIT
SDMMC_HighSpeedONE]
SD_READ: 20000 20000 0x40008000 -> 668484 usec
<OK>
Inp32(uAddr) : 0xea00007e
FW Booting
[Patch Stop] This is not Rom Code.
Click to expand...
Click to collapse
* After done this yur mobile must me n download mode or white screen if white screen manually put into download mode.
* After dead boot repair mine white screen i manually put into download mode pir below
* Now update your mobile with factory firmware with PIT file lik below given n the picr.Factory firmware Download Here
* After update complete yur mobile may not have imei .imei null or yur mobile will not boot bcoz of dead boot repair. yur efs must be corrupted
* To Fix this prob first root yur mobile Download from here (flash it through odin select as odin)
* Now Download this EfS repair file nd flash it through odin select as odin yur mobile must boot
but the imei become lik this 004999010640000
I9300_Repair_efs.tar.rar
* if yur imei is null yu cant repair using this box so 1st yu have to repair the efs using above givn file. if yur imei bcome lik tis oly (004999010640000) yu can repair using z3x or othr samsung tool
* Now follw the picr to repair imei problem.
* After IMEI Repair
I hope this post wil helpful for lotz of dem :laugh::laugh::laugh::laugh::laugh::laugh: :good::good:
Thank you for your great solution.
I have revive several i9300 by your solution.
But i have facing 1 big problem, the phone which i revive by this method only have Emergency Call after upgrade the firmware to official samsung 4,3 roms. phone was okay when under 4.1.2 firmware. (XXEMA2)
Imei is good n Serial is good. (Some phones have Serial 000000000).
another issue is Phone dun have product name under download mode.
neusys said:
Thank you for your great solution.
I have revive several i9300 by your solution.
But i have facing 1 big problem, the phone which i revive by this method only have Emergency Call after upgrade the firmware to official samsung 4,3 roms. phone was okay when under 4.1.2 firmware. (XXEMA2)
Imei is good n Serial is good. (Some phones have Serial 000000000).
another issue is Phone dun have product name under download mode.
Click to expand...
Click to collapse
For Emergency Call fix run Samsung tool there repair/ run network repair
for serial nubr 000000 fix yu hav to repair baseband 1st try to write serial nubr using samsung tool or repair using asanam dongle.
Still same hardware issue may b
Well done. Thanks for your help again. All problem have been solved.
Do i need to create new memory card for note2 N7100 ?
is it the same procedure for note2 N7100 also ?
Hey Man (or more likely to be a woman )
Don't you think it is a bad idea to post your imei in public?
Bad things can happen
done all the steps but process wont start
i got dead s3 and i followed all the above steps and im using spt box for the final process but nothings happend.
i waited for 15 minuts,tried many times but same..?
any help..?
how about for N7100, is there same procedure and same SDCARD used on i9300 ?
n 7100 with no rom
i have an n7100 that looks exactly as your s3 in the two pictures. when i turn it on it shows the exact scrambled image,and when entered in boot mode,this is what i get:
ODIN MODE (red)
PRODUCT NAME: GT-N7100
CUSTOM BINARYDOWNLOAD: No
CURENT BINARY:Samsung Official
SYSTEM STATUS: Custom
KNOX WARANTY VOID: 0
AP SWREV:
THAT IS THE EXACT MESAGE,NOTHING PLUS OR MINUS
when i flash whit odin,it sais no pit partition. i need help with the files and procedure
super thx
carabus.adrian.daniel said:
i have an n7100 that looks exactly as your s3 in the two pictures. when i turn it on it shows the exact scrambled image,and when entered in boot mode,this is what i get:
ODIN MODE (red)
PRODUCT NAME: GT-N7100
CUSTOM BINARYDOWNLOAD: No
CURENT BINARY:Samsung Official
SYSTEM STATUS: Custom
KNOX WARANTY VOID: 0
AP SWREV:
THAT IS THE EXACT MESAGE,NOTHING PLUS OR MINUS
when i flash whit odin,it sais no pit partition. i need help with the files and procedure
Click to expand...
Click to collapse
yours may b a hardware issue . emmc chip problem yu hav to replace it
neusys said:
how about for N7100, is there same procedure and same SDCARD used on i9300 ?
Click to expand...
Click to collapse
yes same procedure
n7100 stuck in download mode
jamesjerss said:
yours may b a hardware issue . emmc chip problem yu hav to replace it
Click to expand...
Click to collapse
thankyou for the reply,i found someone to change it for 40 $. i hope it will work after...
carabus.adrian.daniel said:
thankyou for the reply,i found someone to change it for 40 $. i hope it will work after...
Click to expand...
Click to collapse
So if you get this no PIT file message search for android 4.3 Pit file for your phone and flash from odin with rom and pit file both.
I don't think it is a hardware problem.
i have few s3 i9300 which did not show any respond. whats the problem ?
Very useful, thanks.
how to create sd card because i cant follow the photos because they are deleted . anyone tell me how ?
prablem
hello thank you for your help I have done everything that you have wroten but is give me error different like this
[LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0
[DVFS] ARM(0) : 5
[DVFS] INT(1) : 0
[DVFS] G3D(2) : 0
[DVFS] MIF(3) : 0
[SD_INIT
SDMMC_HighSpeedONE]
SD_READ: 20000 20000 0x40008000 -> 440042 usec
<OK>
Inp32(uAddr) : 0x53525353
LINUX Bootingøq!?
---------- Post added at 10:53 AM ---------- Previous post was at 10:46 AM ----------
Hello thank you for your help I have done everything that you have wroten but is give me error different like this
[LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0
[DVFS] ARM(0) : 5
[DVFS] INT(1) : 0
[DVFS] G3D(2) : 0
[DVFS] MIF(3) : 0
[SD_INIT
SDMMC_HighSpeedONE]
SD_READ: 20000 20000 0x40008000 -> 440042 usec
<OK>
Inp32(uAddr) : 0x53525353
LINUX Bootingøq!?[/QUOTE]
please help me I have 2 samsung galaxy s3 the same problem
neusys said:
Well done. Thanks for your help again. All problem have been solved.
Do i need to create new memory card for note2 N7100 ?
is it the same procedure for note2 N7100 also ?
Click to expand...
Click to collapse
Hello I have fix samsung s3 and it show only emergency call how did u fix the emergency call please
Hi, jamesjerss, first of all thx for sharing this information, it really help! thx agn. but now im facing some issue for N7100, for I9300 there is no any problem. when i use the same method for N7100, it will shwo up this error, kindly help.
pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: fuelgauge power ok
init_fuel_gauge: POR status
fuelgauge_por: POR start: vcell(3886), vfocv(3918), soc(66)
fuelgauge_por: update SDI parameter
fuelgauge_por: RCOMP(0x87), TEMPCO(0x930)
fuelgauge_por: POR finish: vcell(3887), vfocv(3951), soc(61)
get_table_soc: vcell(3887) is caculated to t-soc(67.89)
init_fuel_gauge: start: vcell(3887), vfocv(3951), soc(61), table soc(67)
init_fuel_gauge: finish: vcell(3887), vfocv(3951), soc(61), table soc(67)
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x10
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0x2
PMIC_IRQ1 = 0xc
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=7d98e8c0
microusb_get_attached_device: STATUS1:0x3d, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw 'download_error.jpg'...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: 'download_error.jpg' j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
[ERROR:LCD] s6e8ax0_read_id : s6e8ax0_read() failed
Thnkyou
Sent from my Nexus 4 using Tapatalk
Hello. I have spent 3 hours trying to find if my phone is able to be saved after something I did last night.
Here is what happened:
I read online that KitKat was available for T-Mobile LG G2 D801 Black.
On my (rooted) phone I downloaded a 1.5G file called D80120A_00.kdz
When I clicked to open the file SuperUser popped up asking for permission.
3 options appeared, (sorry I cannot remember what they were called) and I clicked install (I think)
My phone rebooted and I feel asleep.
Now my phone is stuck in what I believe to be Fastboot mode and the following is displayed on the phone screen
Unplugged from computer:
fastboot mode started
udc_start()
Plugged in via USB cable to computer:
fastboot mode started
udc_start()
-reset-
-portcharge-
fastboot: processing commands
And that's it. It never goes further than either of these two options.
Also, when running the LG Mobile Support Tool is says "Waiting for Connection" and will not recognize my phone as being plugged in.
I tried using UpTestEX to flash the stock version of my TMobile. It says there is no USB connection and shows me this information in the box below:
11:40:10 : Restart.....
11:40:10 : Start Date : 2014-03-05 11:40:10
11:40:10 : ---------- QM Testmode ---------
11:40:10 : ***** Check Tool Version *****
11:40:10 : Tool version : 1.6.9.0
11:40:10 : UpgradeDLL version : 2.1.5.0
11:40:10 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
11:40:10 : LGE USB Driver Version :
11:40:10 : Android PDLV Version :
11:40:10 : Android NDLV Version :
11:40:10 : ******************************************
11:40:10 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
11:40:10 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
11:40:10 : SetEmerModeAT()
11:40:10 : _IsConnectedPhone Call
11:40:10 : _IsConnectedPhone(0)
11:40:10 : 0 - NotConnected.
11:40:10 : 1 - Normal connect success
11:40:10 : 2 - Emergency connect success
11:40:10 : *****CheckOS Start********
11:40:11 : Microsoft_Windows7_Home Edition_
11:40:11 : *****CheckPCSyncPrograms Start*****
11:40:11 : PCSyncPrograms Not Found - OK and ready to upgrade
11:40:11 : Verifying phone connection...
11:40:11 : dwWaitResetTime(40000 ms)
11:40:12 : _IsConnectedPhone Call
11:40:12 : _IsConnectedPhone(0)
11:40:12 : 0 - NotConnected.
11:40:12 : 1 - Normal connect success
11:40:12 : 2 - Emergency connect success
11:40:13 : _IsConnectedPhone Call
11:40:13 : _IsConnectedPhone(0)
11:40:13 : 0 - NotConnected.
11:40:13 : 1 - Normal connect success
11:40:13 : 2 - Emergency connect success
11:40:14 : _IsConnectedPhone Call
11:40:14 : _IsConnectedPhone(0)
11:40:14 : 0 - NotConnected.
11:40:14 : 1 - Normal connect success
11:40:14 : 2 - Emergency connect success
11:40:14 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
11:40:16 : Check Cancel button active..
11:40:16 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:40:16 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:40:16 : LG Mobile Phone S/W Upgrade is canceled.\nTo finish the LG Mobile Phone S/W Upgrade, press the 'Finish' button below.
11:40:16 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Anyone have any suggestions?
Thanks so much.
ReallyRick said:
Hello. I have spent 3 hours trying to find if my phone is able to be saved after something I did last night.
Here is what happened:
I read online that KitKat was available for T-Mobile LG G2 D801 Black.
On my (rooted) phone I downloaded a 1.5G file called D80120A_00.kdz
When I clicked to open the file SuperUser popped up asking for permission.
3 options appeared, (sorry I cannot remember what they were called) and I clicked install (I think)
My phone rebooted and I feel asleep.
Now my phone is stuck in what I believe to be Fastboot mode and the following is displayed on the phone screen
Unplugged from computer:
fastboot mode started
udc_start()
Plugged in via USB cable to computer:
fastboot mode started
udc_start()
-reset-
-portcharge-
fastboot: processing commands
And that's it. It never goes further than either of these two options.
Also, when running the LG Mobile Support Tool is says "Waiting for Connection" and will not recognize my phone as being plugged in.
I tried using UpTestEX to flash the stock version of my TMobile. It says there is no USB connection and shows me this information in the box below:
11:40:10 : Restart.....
11:40:10 : Start Date : 2014-03-05 11:40:10
11:40:10 : ---------- QM Testmode ---------
11:40:10 : ***** Check Tool Version *****
11:40:10 : Tool version : 1.6.9.0
11:40:10 : UpgradeDLL version : 2.1.5.0
11:40:10 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
11:40:10 : LGE USB Driver Version :
11:40:10 : Android PDLV Version :
11:40:10 : Android NDLV Version :
11:40:10 : ******************************************
11:40:10 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
11:40:10 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
11:40:10 : SetEmerModeAT()
11:40:10 : _IsConnectedPhone Call
11:40:10 : _IsConnectedPhone(0)
11:40:10 : 0 - NotConnected.
11:40:10 : 1 - Normal connect success
11:40:10 : 2 - Emergency connect success
11:40:10 : *****CheckOS Start********
11:40:11 : Microsoft_Windows7_Home Edition_
11:40:11 : *****CheckPCSyncPrograms Start*****
11:40:11 : PCSyncPrograms Not Found - OK and ready to upgrade
11:40:11 : Verifying phone connection...
11:40:11 : dwWaitResetTime(40000 ms)
11:40:12 : _IsConnectedPhone Call
11:40:12 : _IsConnectedPhone(0)
11:40:12 : 0 - NotConnected.
11:40:12 : 1 - Normal connect success
11:40:12 : 2 - Emergency connect success
11:40:13 : _IsConnectedPhone Call
11:40:13 : _IsConnectedPhone(0)
11:40:13 : 0 - NotConnected.
11:40:13 : 1 - Normal connect success
11:40:13 : 2 - Emergency connect success
11:40:14 : _IsConnectedPhone Call
11:40:14 : _IsConnectedPhone(0)
11:40:14 : 0 - NotConnected.
11:40:14 : 1 - Normal connect success
11:40:14 : 2 - Emergency connect success
11:40:14 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
11:40:16 : Check Cancel button active..
11:40:16 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:40:16 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:40:16 : LG Mobile Phone S/W Upgrade is canceled.\nTo finish the LG Mobile Phone S/W Upgrade, press the 'Finish' button below.
11:40:16 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Anyone have any suggestions?
Thanks so much.
Click to expand...
Click to collapse
well seems you are stuck in fastboot mode this(http://forum.xda-developers.com/showthread.php?t=2477595) might help but you need to find the files for your phone good luck
ReallyRick said:
Hello. I have spent 3 hours trying to find if my phone is able to be saved after something I did last night.
Here is what happened:
I read online that KitKat was available for T-Mobile LG G2 D801 Black.
On my (rooted) phone I downloaded a 1.5G file called D80120A_00.kdz
When I clicked to open the file SuperUser popped up asking for permission.
3 options appeared, (sorry I cannot remember what they were called) and I clicked install (I think)
My phone rebooted and I feel asleep.
Now my phone is stuck in what I believe to be Fastboot mode and the following is displayed on the phone screen
Unplugged from computer:
fastboot mode started
udc_start()
Plugged in via USB cable to computer:
fastboot mode started
udc_start()
-reset-
-portcharge-
fastboot: processing commands
And that's it. It never goes further than either of these two options.
Also, when running the LG Mobile Support Tool is says "Waiting for Connection" and will not recognize my phone as being plugged in.
I tried using UpTestEX to flash the stock version of my TMobile. It says there is no USB connection and shows me this information in the box below:
11:40:10 : Restart.....
11:40:10 : Start Date : 2014-03-05 11:40:10
11:40:10 : ---------- QM Testmode ---------
11:40:10 : ***** Check Tool Version *****
11:40:10 : Tool version : 1.6.9.0
11:40:10 : UpgradeDLL version : 2.1.5.0
11:40:10 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
11:40:10 : LGE USB Driver Version :
11:40:10 : Android PDLV Version :
11:40:10 : Android NDLV Version :
11:40:10 : ******************************************
11:40:10 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
11:40:10 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
11:40:10 : SetEmerModeAT()
11:40:10 : _IsConnectedPhone Call
11:40:10 : _IsConnectedPhone(0)
11:40:10 : 0 - NotConnected.
11:40:10 : 1 - Normal connect success
11:40:10 : 2 - Emergency connect success
11:40:10 : *****CheckOS Start********
11:40:11 : Microsoft_Windows7_Home Edition_
11:40:11 : *****CheckPCSyncPrograms Start*****
11:40:11 : PCSyncPrograms Not Found - OK and ready to upgrade
11:40:11 : Verifying phone connection...
11:40:11 : dwWaitResetTime(40000 ms)
11:40:12 : _IsConnectedPhone Call
11:40:12 : _IsConnectedPhone(0)
11:40:12 : 0 - NotConnected.
11:40:12 : 1 - Normal connect success
11:40:12 : 2 - Emergency connect success
11:40:13 : _IsConnectedPhone Call
11:40:13 : _IsConnectedPhone(0)
11:40:13 : 0 - NotConnected.
11:40:13 : 1 - Normal connect success
11:40:13 : 2 - Emergency connect success
11:40:14 : _IsConnectedPhone Call
11:40:14 : _IsConnectedPhone(0)
11:40:14 : 0 - NotConnected.
11:40:14 : 1 - Normal connect success
11:40:14 : 2 - Emergency connect success
11:40:14 : The USB cable is not connected with the phone.\nConnect the phone and wait until the USB port is connected. Then, press the 'Retry' button.
11:40:16 : Check Cancel button active..
11:40:16 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
11:40:16 : Page_Error ºÎºÐÀÔ´Ï´Ù
11:40:16 : LG Mobile Phone S/W Upgrade is canceled.\nTo finish the LG Mobile Phone S/W Upgrade, press the 'Finish' button below.
11:40:16 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Anyone have any suggestions?
Thanks so much.
Click to expand...
Click to collapse
try this method : http://forum.xda-developers.com/showthread.php?t=2477595....
manager77 said:
try this method : http://forum.xda-developers.com/showthread.php?t=2477595....
Click to expand...
Click to collapse
I am a bit confused at this part. Maybe I am just not understanding his English very well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS. I just noticed that I cannot seem to turn my phone off. Holding down the power button turns off the screen for a moment then turns it back on.
ReallyRick said:
I am a bit confused at this part. Maybe I have just not understanding his English very well.
Click to expand...
Click to collapse
your phone is already in fastboot mode but you need to get the original files for your d801 which you can find here http://downloads.codefi.re/autoprime/LG/LG_G2/D801BK/Stock_Firmware/10c_partitions and I guess you will have to trial and error just like he did until you recover download mode, once there you can just use lg flash tool and flash back to stock with the bin and dll from here http://downloads.codefi.re/autoprime/LG/LG_G2/D801BK/Stock_Firmware
don't forget you need the fastboot flashtool from his previous thread which is linked there
XxZombiePikachu said:
don't forget you need the fastboot flashtool from his previous thread which is linked there
Click to expand...
Click to collapse
Don't I need to address the issue of my computer not recognizing my phone is plugged in via USB first?
Ok let's start out what exactly happens when you plug the phone to your pc while it's turned on in fastboot mode/if you leave the usb cable plugged in what happens when you hold down the power and it restarts and what does you pc say about ten phone
Sent from my LG-D800 using xda app-developers app
XxZombiePikachu said:
Ok let's start out what exactly happens when you plug the phone to your pc while it's turned on in fastboot mode/if you leave the usb cable plugged in what happens when you hold down the power and it restarts and what does you pc say about ten phone
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
Right now my phone shows this:
fastboot mode started
udc_start()
When I plug my phone into my computer (I do hear the normal USB "notification" sound on my computer) and the screen shows this:
fastboot mode started
udc_start()
-reset-
-portcharge-
fastboot: processing commands
Leaving the phone plugged in I hold down the power button when phone goes dark I heard the other notification noise. Screen turns back on, I hear first notification noise and screen shows
fastboot mode started
udc_start()
-reset-
-portcharge-
fastboot: processing commands
Nothing ever pops up on my computer screen at all.
Only when I try using the LG Mobile Support Tool or UpTestEX does those applications say there is no connection to my phone.
ReallyRick said:
Right now my phone shows this:
fastboot mode started
udc_start()
When I plug my phone into my computer (I do hear the normal USB "notification" sound on my computer) and the screen shows this:
fastboot mode started
udc_start()
-reset-
-portcharge-
fastboot: processing commands
Leaving the phone plugged in I hold down the power button when phone goes dark I heard the other notification noise. Screen turns back on, I hear first notification noise and screen shows
fastboot mode started
udc_start()
-reset-
-portcharge-
fastboot: processing commands
Nothing ever pops up on my computer screen at all.
Only when I try using the LG Mobile Support Tool or UpTestEX does those applications say there is no connection to my phone.
Click to expand...
Click to collapse
Okay then well download the fastboot flash tool and then see what happens
Sent from my LG-D800 using xda app-developers app
XxZombiePikachu said:
Okay then well download the fastboot flash tool and then see what happens
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
I was finally able to find a working link to the fastboot tool and have it downloaded and in a root folder like it says.
I went to the CMD prompt and entered:
fastboot erase laf
(it showed erasing laf ...OKAY)
Then I entered:
fastboot flash laf laf.img
(it showed sending laf...OKAY
writing laf...OKAY)
Now because I cannot remove my phone battery I followed the instructions and entered
fastboot reboot
My phone rebooted I held down the power button until the phone shut off and unplugged USB.
I then Held the Volume UP button and plugged back in my USB.
Takes me to the same fastboot screen I have been seeing all along.
Reason I provided a link for all partitions of the d801 is because maybe a partition is missing/corrupted which might be necessary to boot properly even if it's just download mode but you have to be careful when doing so which is also why I said you might just have to trial and error until things get better looking for a positive side of course
Sent from my LG-D800 using xda app-developers app
DONT ASK ME HOW, but I was able to fix it. When I held VOLUME UP and plugged in the USB cord THIS TIME I was given the Firmware screen. I then flashed the stock version using the UPTestEX and my phone is working again!
It is a complete factory reset but ITS WORKING!
Thanks all! LOL
Well at least something good came from this good luck and be a little more careful with it from now on
Sent from my LG-D800 using xda app-developers app