Hi, Great community.
I'm here with an issue I was trying to install Lg G3 Cloudy Rom for Lg G2 on my G2 D802. But My bad I'm in trouble now.! My phone stuck on very start. Getting message Flash Mode Started and Udc Start. Seems like I have flashed it wrongly .. very confused
I have connected it to usb Data cable got some other notifications on cell screen and nothing else.
I am unable to get in for download or recovery mode tried power + up and down buttons already.
Please help Experts.
I really want help. I don't have extra cell at the moment. Please any one ?
Uhm.. i dont understand what happened. You flashed CloudyG3 using custom recovery and failed? And your phone is booting but not properly?
Please read my thread named with "fastboot.." . Then report back. Did you select d802 in cloudy? Is your phone refurbished from eBay?
bender_007 said:
Please read my thread named with "fastboot.." . Then report back. Did you select d802 in cloudy? Is your phone refurbished from eBay?
Click to expand...
Click to collapse
Yes I did select D802. But seems like its not D802
Bought this device 2nd hand from a person that import sets from abroad. D802 was mentioned in About phone and back.
Please help..
I have set only. Don't have IMEI matched box even
bender_007 said:
Please read my thread named with "fastboot.." . Then report back. Did you select d802 in cloudy? Is your phone refurbished from eBay?
Click to expand...
Click to collapse
This is very common. The phone you buy off ebay might not be what it seems. Seeing as the build prop's modded do you know what the best way is to identify the model rather than taking off the cover?
Unfortunately no. Did autorec d802 work for you or not? Try entering download mode or recovery, it should work since the ROM flashes only the kernel.
bender_007 said:
Unfortunately no. Did autorec d802 work for you or not? Try entering download mode or recovery, it should work since the ROM flashes only the kernel.
Click to expand...
Click to collapse
To inspect the actual model number I have removed the back some how. And see what I got.. I don't see D802 mention there or IMEI number.
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, I was following these steps:
1) Root by downloading and unpacking ioroot10
http://downloads.codefi.re/thecubed/lg_g2/root/ioroot10.zip
2) Perform Nandroid Backup
3) Download TWRP apk (install on phone)
http://www.droidviews.com/install-twrp-recovery-on-lg-g2-running-android-4-4-2-kitkat/
4) download and flash lg g2 kitkat baseband
https://www.androidfilehost.com/?w=files&flid=12880
5) download and flash CloudyG3 1.2 rom
http://forum.xda-developers.com/showthread.php?t=2783192
Click to expand...
Click to collapse
I was watching some videos about G2 and found that My handset does not look like G2 D802. The D802 Does not have those two yellow strips aside of battery. Please correct me if I am wrong. I'm struggling because it seems like Its not D802.
Ioroot10 is the wrong one if you were on KitKat.
bender_007 said:
Ioroot10 is the wrong one if you were on KitKat.
Click to expand...
Click to collapse
Right. So, what should I do now
Now you flash your original aboot, boot, laf and pray it works.
bender_007 said:
Now you flash your original aboot, boot, laf and pray it works.
Click to expand...
Click to collapse
I have pressed 3 back buttons on back of the phone and Got the IMEI number. But I'm unable to get KDZ for this IMEI number.
Suggestion needed.
Abdul Basit King said:
I was watching some videos about G2 and found that My handset does not look like G2 D802. The D802 Does not have those two yellow strips aside of battery. Please correct me if I am wrong. I'm struggling because it seems like Its not D802.
Click to expand...
Click to collapse
Definitely its not D802. Peel of the sticker at Bottom Left and tell the model.
For Exact Model, You have to open the Upper plate of motherboard and check the back so de of motherboard for 100% confirmation
I have resolved the issue.
It wasn't D802. After removing back cover I found that It's D800. So I applied the D800 files and now its working fine.
Let me know if any one need help while having same issue.
Thanks.
--AB
Abdul Basit King said:
I have resolved the issue.
It wasn't D802. After removing back cover I found that It's D800. So I applied the D800 files and now its working fine.
Let me know if any one need help while having same issue.
Thanks.
--AB
Click to expand...
Click to collapse
Mine is D801, But baseband Unknown and IMEI Issue isn't solving
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Related
Hi all,
http://forum.xda-developers.com/showthread.php?t=2722008&page=3
when use csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW774595432109876543213/D80220B_00.kdz flah and go back to another firmware it lost knock on function.anybody can help ?
iall5tar said:
DIdnt fix it.
i try the following steps just to try to fix it but everything failed:
Flash another .kdz via PC.
Flash via CWM another ROM.
Do a restore nandroid.
Downgrading to JB.
Flashed another kernel (SImple v4, savoca, Dorimanx)
Flased baseband.
dunno what el se to do! xD
btw everything works good but i lost the feature Knock on.
Click to expand...
Click to collapse
I try to flash TOT file ,doedn't work too. :crying:
Solution
* 3845#*802# > setting > update touch firmware
Same here, i dont find any solution...
somboons said:
Hi all,
http://forum.xda-developers.com/showthread.php?t=2722008&page=3
when use csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW774595432109876543213/D80220B_00.kdz flah and go back to another firmware it lost knock on function.anybody can help ?
I try to flash TOT file ,doedn't work too. :crying:
Click to expand...
Click to collapse
I get the impression that LG are trying to use some sly little tricks since introducing the kitkat rom to make modding or flashing the device in non-recommended ways more awkward.
bobsie41 said:
I get the impression that LG are trying to use some sly little tricks since introducing the kitkat rom to make modding or flashing the device in non-recommended ways more awkward.
Click to expand...
Click to collapse
however, kdz flashing is the "correct" LG way...
somboons said:
Hi all,
http://forum.xda-developers.com/showthread.php?t=2722008&page=3
when use csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW774595432109876543213/D80220B_00.kdz flah and go back to another firmware it lost knock on function.anybody can help ?
I try to flash TOT file ,doedn't work too. :crying:
Click to expand...
Click to collapse
Do you test dori kitkat kernel ?
http://www.dorimanx.com/LG/beta-test/
LenAsh said:
however, kdz flashing is the "correct" LG way...
Click to expand...
Click to collapse
Not for flashing firmware/software intended for a different d802 iteration. ie/ Vodafone on unbranded etc.
somboons said:
Hi all,
http://forum.xda-developers.com/showthread.php?t=2722008&page=3
when use csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW774595432109876543213/D80220B_00.kdz flah and go back to another firmware it lost knock on function.anybody can help ?
I try to flash TOT file ,doedn't work too. :crying:
Click to expand...
Click to collapse
But Knock code works well mate?
Go to the service menu (3845#*80x#) and look for "Update Touch Firmware", it will fix it the issue.
somboons said:
Hi all,
http://forum.xda-developers.com/showthread.php?t=2722008&page=3
when use csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW774595432109876543213/D80220B_00.kdz flah and go back to another firmware it lost knock on function.anybody can help ?
I try to flash TOT file ,doedn't work too. :crying:
Click to expand...
Click to collapse
Oke
Solution
* 3845#*802# > setting > update touch firmware
* The device will freeze ( Wait until the process )
Re Test
kennguy said:
But Knock code works well mate?
Click to expand...
Click to collapse
work on 20b but when go to other fw knock on lost
pendroz said:
Oke
Solution
* 3845#*802# > setting > update touch firmware
* The device will freeze ( Wait until the process )
Re Test
Click to expand...
Click to collapse
very thank
somboons said:
work on 20b but when go to other fw knock on lost
Click to expand...
Click to collapse
I heard someone said that LG has changed something in new FW so knock on will lost even you downgrade or flash another FW.
kennguy said:
I heard someone said that LG has changed something in new FW so knock on will lost even you downgrade or flash another FW.
Click to expand...
Click to collapse
Solution
* 3845#*802# > setting > update touch firmware
work very well
somboons said:
Solution
* 3845#*802# > setting > update touch firmware
work very well
Click to expand...
Click to collapse
A 1,000 thanks!, I updated to the most recent Kit Kat from Rogers on my D803 and Knock On was not working when I downgraded to an older release. Dialing 3845#*803# solved the problem .
Hid3rs said:
Go to the service menu (3845#*80x#) and look for "Update Touch Firmware", it will fix it the issue.
Click to expand...
Click to collapse
Hi, when I use knock code, can I use knock on too mate?
kennguy said:
Hi, when I use knock code, can I use knock on too mate?
Click to expand...
Click to collapse
Had you run the wizard for the Knock Code, you would've noticed that you can not use Knock On when Knock Code is enabled.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have also lost knock on/code but as you suggested I made this toch firmware update and after that knock on works but... all the time, even if I'm using knock code.. I tried wipe and differnet kernel's but nothing seems to help..
after the kit kat update my tmobile d801 unlocked isnt able to connec to telus network anymore, it just says no network. I have tried a rogers sim card in it and it works fine, I dont understand what could have changed, phone is still unlocked, my sim works in my other phones. I tried downgrading back to jellybean, even tried a custom rom, nothing worked.
Hi,
I have knock code working on both CloudyG3 and CloudyFlex, but Knock On is lost in VS980 stock 24A firmware.
My G2 variant is Verizon VS980, no hidden menu can be brought up by dialing "*3845#*980*", how can I fix my issue?
Thanks.
zeroxia said:
Hi,
I have knock code working on both CloudyG3 and CloudyFlex, but Knock On is lost in VS980 stock 24A firmware.
My G2 variant is Verizon VS980, no hidden menu can be brought up by dialing "*3845#*980*", how can I fix my issue?
Thanks.
Click to expand...
Click to collapse
its 3845#*980#
Here you find my new hosting space, where you'll find any Original Stuff needed to restore, for any variant...(wait if you still not find yours )
FOLLOW this guide and Steps http://forum.xda-developers.com/showthread.php?t=2475045 but using G3 files, sure
p.s. Disconnect usb cable only when you see TEST 3 image on G3 (it could be 4/5 minutes before you see it) - remove battery, and restart G3.
Flashtool (last Version)
Driver
if you rehost this job in other places (for viet guys) write real source
Donate a Beer if you want to support always updated repository FW
Awesome, hoping you find the UK images too!
Sent from my LG-D855 using Tapatalk
Lennyuk said:
Awesome, hoping you find the UK images too!
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW893006432109876543213/D85510A_00.kdz
This was taken from another thread which is the link to the factory UK images.
daleski75 said:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW893006432109876543213/D85510A_00.kdz
Click to expand...
Click to collapse
Thanks, but I have trouble with KDZ files on windows 8 - need the TOT.
I am sure they will turn up soon.
Lennyuk said:
Awesome, hoping you find the UK images too!
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Hello
Have u tried ? can you post a screen of the "TEST 3 image" pls
Anyone know why the d855 doesnt show the LTE bands in the service menu like the Korean variant?
Lostatsea23 said:
Anyone know why the d855 doesnt show the LTE bands in the service menu like the Korean variant?
Click to expand...
Click to collapse
What bands are you after?
The D855 will juts connect to any of the following - LTE 700 / 800 / 900 / 1800 / 2100 / 2300 / 2600, its not been built to allow you to switch between them.
May i ask if the tut posted is the same as this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-D855 using Tapatalk
i did it...
is normal to have apps from orange, like antivirus? and more... and other companys, and amazon.....
thx really nice
Can I follow this guide for using LG_Flash_Tool and UK 16GB .kdz to return my G3 to stock, or are there any settings that need changing for it to work?
http://forum.xda-developers.com/showthread.php?t=2432476
557953 said:
Can I follow this guide for using LG_Flash_Tool and UK 16GB .kdz to return my G3 to stock, or are there any settings that need changing for it to work?
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Im good got it sorted very easy just the .kdz & LG FT 2014
557953 said:
Im good got it sorted very easy just the .kdz & LG FT 2014
Click to expand...
Click to collapse
Did you use "LG FT 2014" from LG G2 thread, by quangnhut123 ?? And flashed your LG G3 ? Super ... :good:
Yes indeed
Dowloaded the .kdz file put G3 in DL mode, plugged into PC, used device manager to change port from whatever it was to 41, loaded the .kdz into LG Flash Tool 2014, used "CSE flash" left all other settings as they were and started it going..... took about 5mins and badabadabing brand new G3 again
557953 said:
Yes indeed
Dowloaded the .kdz file put G3 in DL mode, plugged into PC, used device manager to change port from whatever it was to 41, loaded the .kdz into LG Flash Tool 2014, used "CSE flash" left all other settings as they were and started it going..... took about 5mins and badabadabing brand new G3 again
Click to expand...
Click to collapse
Hiii, thats extreme GOOOOD News
Sent from my LG-D855 using XDA Premium 4 mobile app
Glad I could help you but yeah worked like a charm. Seems the dev on this phone is coming along steadily as the cwm style recovery from the Chinese forum worked fine on d855 also. Just wanting, twrp cyanogen/aosp and a oc kernel now
Hey guys,
I am new to LG devices.
Does this also work on branded devices (G3 16GB vodafone branding)?
Thanks in advance.
should do, you might loose Vodafone boot-screen or any Vodafone bloat.... neither of which are bad
as long as you have a D855 16GB UK G3 you should be fine
That's my goal
My G3 will be a DE version I think. Shipping mid July. Should be fine too?
tHoMaS-1 said:
That's my goal
My G3 will be a DE version I think. Shipping mid July. Should be fine too?
Click to expand...
Click to collapse
Sure just make sure you use the right firmware for you device, if its DE version i'm guessing will be 32GB Euro D855 FW
like me.
this is what i used to upgrade my D855 v10a to australia 10c.
since i'm going to update to v10e, was looking for this thread but found the two threads here in G3 might confuse those new to LG.
looking for something simple to follow, credits to OP of this thread:
http://forum.xda-developers.com/showthread.php?t=2797190
quangnhut123 said:
You can donate me a beer via paypal : [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Version:
+ Build 25/06/2014 : Initial Version
+ Build 27/06/2014 : Fix not working with windows XP
+ Build 03/07/2014 : Fix not working with some machine run windows 8/8.1 64bit
2. What's news:
+ This is a modified version of UpTestEX v1.2.3.1 and working with all LG Smartphone Models
+ Re-design GUI simpler.
+ Working without LG Mobile Support Tool installed !
+ Working with lastest version of LG Mobile Support Tool.
+ Dont need to use hosts file or run http server to bypass anymore !
+ Default language is set to English. Don't need to choose language any more !
3. Tutorial:
+ Download and setup LG Driver : http://www.mediafire.com/download/g...leDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe
+ Download LG Flash Tool 2014 tool and extract :
http://www.mediafire.com/download/fwrcd3pdj0svjtb/LG_Flash_Tool_2014.zip
+ Enter to Download Mode and plug USB into your PC
+ WARNING : Remember copy KDZ file into LG Flash Tool 2014 folder
+ Run LGFlashTool2014.exe and do as following pictures :
+ If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library : https://googledrive.com/host/0B9l4QOCXUmxXV19jN1ZrTnBwdTQ/VC_RedistInstaller.exe[/SIZE]
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
No need to choose desired language, it automatically change to English as a default setting.
​+ Wait until 100% to complete !
Click to expand...
Click to collapse
how to enter download mode:
http://www.android.gs/enter-download-mode-lg-g2/
that is for LG G2 but also works for LG G3
radeonxt said:
how to enter download mode:
http://www.android.gs/enter-download-mode-lg-g2/
that is for LG G2 but also works for LG G3
Click to expand...
Click to collapse
I sent the original OP yesterday a message he should please post his thread also here. You were quicker. Good job.
I have an european phone model D855. Do I live mode on CDMA or choose something else?
Thanks!
J.
Joao Oliveira said:
I have an european phone model D855. Do I live mode on CDMA or choose something else?
Thanks!
J.
Click to expand...
Click to collapse
I left it always to CDMA and worked well with EUR firmware.
May i ask. What does this TOOL ?
saigon66 said:
May i ask. What does this TOOL ?
Click to expand...
Click to collapse
It is a flashtool, to flash KDZ files (New or other stock roms) , also when you have messing your phone up, and want to do a total cleanup .....
A must have tool.
Fauert said:
It is a flashtool, to flash KDZ files (New or other stock roms) , also when you have messing your phone up, and want to do a total cleanup .....
A must have tool.
Click to expand...
Click to collapse
It tells me that my phone is not connected
olafsand said:
It tells me that my phone is not connected
Click to expand...
Click to collapse
Have you installed G3 driver on PC? Go in download mode and try again ...
Sent from my LG-D855 using XDA Premium 4 mobile app
Fauert said:
Have you installed G3 driver on PC? Go in download mode and try again ...
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes i have. Now after pc restart it works. But it does`nt fix my screen rotation not working issue
Anything for us Mac users?
Moostafa29 said:
Anything for us Mac users?
Click to expand...
Click to collapse
http://windows.microsoft.com/en-gb/windows/buy
codified said:
http://windows.microsoft.com/en-gb/windows/buy
Click to expand...
Click to collapse
Lol, thx
Does it work with phones locked to a operator.
Can I flash any other ROM for unlocked phones?
I've flashed kdz files twice now but it strikes me that I'm relying on the files being the correct one. How can I tell if I have the 16gb or 32gb version ?
Maybe I didn't explained me the right way.
Is there any problem to flash, this way, a ROM for SIM unlocked G3 on a SIM locked G3?
[Q] D855 firmwares compatible with D855P?
Can I flash a stock firmware from a D855 to a D855P?
Mine LG G3 is D855P and come with the bloatware from the Carrier.
Moostafa29 said:
Anything for us Mac users?
Click to expand...
Click to collapse
I use a W7 VM with VMware Fusion on my Mac and it works.
Using Parallels instead of VMware Fusion should work too I read in another thread.
I've never owned an LG phone before. How can I know which firmware kdz files are right for me?
Sent from my LG-D855 using XDA Free mobile app
ariedam said:
Can I flash a stock firmware from a D855 to a D855P?
Mine LG G3 is D855P and come with the bloatware from the Carrier.
Click to expand...
Click to collapse
I'm on the same boat! Answers, please?
Questions & Answers/Troubleshooting​[SIZE=+2]Specific to[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click link here>> to go to ROM thread <<Click link here
Please feel free to share issues, questions and offer help
It is always best to thank a ROM OP, in lieu of simply posting "Thank you".
Please keep discussion focused, on the topic described in the OP
Benxter said:
I don't know which Stock ROM you are using but mine has this. Drag down the status bar and tap the button next to the volume slider twice. No more notifications, vibration etc - just total silence.
Click to expand...
Click to collapse
That's the no interruptions mode, which is not silent mode. Alarms will not work.
sandys1 said:
did you try the new CloudyG2 3.1 with D803 ? if your patch works... it would be awesome!
Click to expand...
Click to collapse
I ran it on the D803. Works.
Guys! Come on! Why are there so many children around here. Keep the thread dev related so @Cloudyfa can keep track of what is important.
This is what happened during startup wizard for me. Navbar disappeared but locking and unlocking the phone brought them back.
About xposed installer, should i delete lg cover, and lg weather to make xposed works on this rom?
does it support xcam and its drivers?
Help
To Go from Cloudyg2 2.2 kit Kat to Cloudyg2 3.1 Lollipop do I need to flash a stock lollipop Rom or can i flash straight away.
Apologies if question is amateur.
Thank you Cloudy for your work.
tiagoSequeira said:
+1 please help
Click to expand...
Click to collapse
I have D802, also got bootlooped. I was using stock KitKat. I tryed clean flash multiple times, the same result.
I collected the details about installation:
Model: LG-D802
Name: cm_d802
Manufacturer: lge
CPU: armeabi-v7a
LCD Density: 480
Storage Size: 2728 MB
Free: 2677 MB
SDCard Size: -1 MB
Free: -1 MB
Google apps:
All
Miscellaneous:
None
Install log: pastebin[dot]com/AbShu8gB
If you have unlocked vs980 and having data issues with TMO network...
When i flashed the Rom for the first-time,
Setup wizard On the wifi network scaning page i entered my network details..and setup the phone..when turned the wifi off..there was no data.also the fast.tmobile.com apn was not installed . then i tried few things like flashing different radio,apn to get the data work but no luck.got bootloops(my fault)
Next time i flashed the rom again and did not enter wifi details on the setup screen and just let the phone force data settings ..data worked flawlessly.
I modified below build.prop entries as well..
ro.carrier=TMO
ro.build.target_operator=TMO
persist.service.crash.enable=1
Sent from my VS980 4G using XDA Free mobile app
Nussi29 said:
Read the OP !!
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
i read the op but should i go to stock lolipop 5.02 and then flash rom?
@lolo1313165
Yes And Install Autorec..
chandidas said:
i'm or resurrection remix, I installed this ROM after clean wipe.
Everything installed succesfully, Now the screen is going blank and if power button pressed LG logo is re-appearing.
Ne idea how to go to recovery mode? help please
Click to expand...
Click to collapse
Do the factory reset
1)Switch off the phone by holding power button for 10 to 15 seconds.
2) while holding the vol down button, press power button and release it when you see lg logo hold the power button..
3)follow the instructions to factory reset.
Sent from my VS980 4G using XDA Free mobile app
@g0xi
Are You Installing The Right One LP And The Correct device model from play store.
Then click on loliipop within the app and it will install,it will show the pop up that it is insatlled
I see some users got this working on d803 after installing the simple ROM patch. Which variant did you choose in Aroma when flashing the ROM?
Is ringtone id present? (google "ringtone id lg g4")
Thanks
I saw couple of posts with bootloop issue and yes you can fix it easily. Download package from this thread http://forum.xda-developers.com/lg-g2/general/d802-bootloader-changer-1-1-jb-kk-lp-t3104380 and install lollipop bootloader (This is offficial one and the partions scheme that Cloudyfa mentioned in point 1 of intruction set is addressed) and then try to install the rom post factory reset. You should be all set then.
How to solve slow charging?
Sent from my LG-D802 using Tapatalk
Jervisd said:
Did you get it to work on the D800 and if so, what did you do to get rid of the bootloop? I'm on Cloudyg2 3.0 with the patch which allows D800 to function.
Click to expand...
Click to collapse
No, I just restored my previous backup to get out of bootloop on my D800. Not sure what to do now... I don't want to go back to stock and take that painful route ;(
I tried KK bootloader, LP bootloader and nothing seems to work.
Azharkanorwala said:
@tung1984322
see this
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
my phone cant connect my pc
pc cant detect my use
Unfortunately mine was d802 Intl and didn't get hands on any other devices. The other workaround would be trying http://blastagator.ddns.net/bootloader.php the D80030F section.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://yadi.sk/d/rDIKJ-XKmHrrh
The KDZ file that I pulled when I update my H815-TWN device
Thanks, can't help but feel like this is a little redundant though. Can easily update via LG Bridge without the need to connect to a unknown (to me) Russian file share site.
Stevles said:
Thanks, can't help but feel like this is a little redundant though. Can easily update via LG Bridge without the need to connect to a unknown (to me) Russian file share site.
Click to expand...
Click to collapse
nop not redundant just that you dont like Russian thats all and thats totally fine, cant force people to like each other.
from South Africa and other parts of the world this is very useful as LG Bridge does not have it. also this is a community so anyone can do whatever within rules they want and the rest can ignore or thank but it is never redundant. its a backup of some file at mega or gdrive or devhost etc etc
thanks dude, this is what i need
Thanks for this.. Lg pulled the update from lg bridge so its always good someone is sharing it.. Ive upgraded to MM using the file and absolutely love it.. Dont really have a big problem with battery life
Sent from my LG-H815 using Tapatalk
How to retrieve or pull the kdz file from lg bridge.
Sent from my LG-H818 using XDA Free mobile app
When lg drive is installing upgrade you can go into this directory C:\Users\shina\AppData\Local\LG Electronics\LG Bridge and find the update, after the installation it will be deleted. So be swift
is this version stable?
i tried updating my phone throug lg bridge but it always says i got the latest os
i got v10e-twn-xx
pipeysh said:
is this version stable?
i tried updating my phone throug lg bridge but it always says i got the latest os
i got v10e-twn-xx
Click to expand...
Click to collapse
Have you tried LGUP instead?
hey guys i wanna ask something , i just new in LG phones , just bought my G4 last week, i live in SEA , i bought imported twn version. Can I flash MM SEA version without any harm?
muhammadnajmi96 said:
hey guys i wanna ask something , i just new in LG phones , just bought my G4 last week, i live in SEA , i bought imported twn version. Can I flash MM SEA version without any harm?
Click to expand...
Click to collapse
Yes you can. There will be no difference to TWN version though
TonyStark said:
Have you tried LGUP instead?
Click to expand...
Click to collapse
haven't tried it yet
will give it a shot
ANy mirrors for this? That download site is truly awful. it's going to take 24 hours to download
pipeysh said:
haven't tried it yet
will give it a shot
Click to expand...
Click to collapse
LGUP is only for flashing files that you already downloaded, it won't help.
I suggest you download the kdz from the OP and flash that. The MM update for the TWN device was pulled by LG soon after it was released, so it won't show up in LG Bridge.
the_scotsman said:
ANy mirrors for this? That download site is truly awful. it's going to take 24 hours to download
Click to expand...
Click to collapse
Only took me 1.5hrs ONLY! pff
File is ginornous 1,626KB
Here is a mirror H81520a_00_1202.zip
TonyStark said:
Only took me 1.5hrs ONLY! pff
Here you go H81520a_00_1202.zip
Click to expand...
Click to collapse
Excellent, thanks! :good:
This one is only taking 15 minutes
the_scotsman said:
Excellent, thanks! :good:
This one is only taking 15 minutes
Click to expand...
Click to collapse
Haven't tried it, as you know I'm on the 20B. Let me know how it goes:good:
when do you guys think we could have root on mm 6.0 twn?
aslo how's the battery life? is it that horrible?!
It won't happen without unlocked bootloader. Which won't happen.
julien32 said:
when do you guys think we could have root on mm 6.0 twn?
aslo how's the battery life? is it that horrible?!
Click to expand...
Click to collapse
I find battery to be excellent. Of course each users individual determining factor will be in how they use their device.
The best you can do is try and find out for yourself:good:
ok so if I setup 6.0 and I don't like it, can I go back to 5.1 with a 5.1 kdz file a 5.1 rootedsystem.img ?