Hey guys. I have this phone for almost a year now. This problem was quite a while back but now.it seems more annoying to me. When on a gray/dark gray background, such as the quick settings toggle on Lollipop. I can see TWO banding or gradients that WHITEN the place where they are. They are arranged like 1 cm from the left and right edges of the screen. I don't know why they are there.
Questions:
1. Is it because of the battery? Like if the battery got swollen, it pushed the panel. BECAUSE THE BATTERY ALIGNS PERFECTLY WITH THE GRADIENTS ARE PRESENT.
2. Is it because of a faulty LCD Panel? Since this phone had no falls whatsoever, im not sure about the LCD being faulty
I think its the battery
WHY BATTERY?
1. Because the battery might push the panel from the back.
2. The phone when i bought it new had a little *creeking* when i pressed from the side of the sim tray and the bottom. But now there aint. Its like its tightely held up. Something a swollen battery might indicate.
3. The battery life had been worse over the time.
4. I use the phone quiet alot when on charge. So.. Yeah
If anyone has more knowledge about the case. Do leave a response. I will be THANKFUL TO YOU. even a little information will be appreciated and will be THUMBS UP accordingly. Thanks!
Bro i got the same problem. The LG G2 my second phone and this line suck monkeyass. Dont take it to the repair or something it gets worser and worser. LG(Netherlands) also confirmed that this is normal and its written in their specification. I told everyone that they have to buy LG phones but now i strictly say dont buy this phone. I know 3 more people with different screen problems on the G2. Sell it! And dont touch any LG phones.
aame
Ive had this problem on three of my g2's. The first wasnt that noticeable, it was on the right wdge of thw screen. i got it replaced due to permanent lines.
The second had the EXACT same problem you describes, but i noticed it right when i got the phone. It looked like something was pressing too hard on the bottom right corner. Got it replaced.
The third one had a similiar problem. But right in the middle of the screen. When i press anywhere on the screen, rippling appears in the middle of the device. Its as if im pressing in the middle of the screen to hard.
Im currently on my seventh g2, all verizon variants. These phones are GREAT phones performance wise, but they are complete sh1t in every other aspect. Ive had every problem you can with these phone. Screen problems, headphone jack problems, speaker problems, mic problems, and camera problems. Im now saving up for a oneplus one device.
Related
Ok, so first thing's first. I've been researching this for a few days now before creating this post. The touchscreen issues I'm finding online, are similar to what I'm experiencing, but the solutions have already been done, or my phone is not responding to them. I'm making this thread to see if anyone else has experienced the same issues or has any new news before I a) return my phone to stock, b) replace the digitizer, or c) buy a new one or upgrade to the G3.
My G2 was rooted, but kept on stock ROM with only small tweaks here and there. After the latest update, I noticed my work G2 had much better reception, so I returned my phone to stock to download the update. After updating, I re-rooted the phone, this time, the only thing I changed was the keyboard which I replaced with the G3 keyboard. Everything was fine for months until about a month ago.
It started with not being able to pull down the notification shade on the right half. No biggie, but after a week or so, it got worse. While using instagram, I noticed that the confirm button was sporadically responsive. Sometimes it worked fine, other times it didn't work at all. It began to progressively get worse on an almost daily basis. I decided to see what was going on and enabled both input options in the developer options menu. I found that the entire right side, about 1/8" was not responding to touch, the area not covered by glass screen protector( i removed it later while trying to troubleshoot). The upper right area showed about a half inch block that wasn't responding (the area where the data ribbon is). I was ok with that as instagram was really the only thing I used being affected.
About a week ago, the mid left screen area started being errratic. It began to get worse and started to affect the front touch screen buttons ( the area where the other data ribbon is). I enabled the input options again and saw that I now had a good portion of my left side of the screen was unresponsive. Even though I didn't drop it, I thought maybe the data ribbons had come loose as those 2 areas are where they are. I opened and disassembled the phone and re-sat the connctions after inspecting them. I double-checked all the other connections and LDIs in case humidity was the culprit. Everything looked good. Didn't fix the problem.
I've had to set my phone to unlock by facial recognition to ensure I don't get locked out, and changed my pin to use numbers not affected. I'm going to replace the digitizer, but wanted to see if anyone else had the same issue, or knew if it was, indeed, a software issue before I spend $75 (I will be replacing the digitizer and LCD to get it working sooner rather than risk damaging the LCD while replacing the digitizer and having to wait another week). I don't want to send it in to LG because I bought it on ebay and have no proof of purchase for warranty, and I want it working sooner.
One thing I noticed that may help with diagnosing, the screen now looks different when off. Before, in direct sunlight, you could see the dotted matrix from the digitizer, and that was it. Now, I can see the retangular pattern across the entire screen. I checked my work G2 which I just received a few months ago and the rectangular pattern is only visible on the edges of the screen, the center is black with only the dotted matrix visible. Keep in mind, this is in direct sunlight. In shade, the rectangles are visible on both.
I'm hoping it's a software issue, but I'm wondering if the digitizer is starting to separate from the LCD. I don't see any acutal separation though.
Thanks for reading the book, and for any feedback. Also, because it will probably come up, I want to avoid upgrading if I can because the G3 is just a little too big.
I restored the phone to stock with the most up to date software. Still doesn't work. It appears to be a hardware issue. I really thought it was software because the dead spots word for a split second after turning on the phone. Oh well. Guess I'm going to order a new digitizer or LCD combo.
Hi all dear members. Since the first day i bought this phone i've been seeing lots of screen issues about it but i never thought i would have one. It's proved me wrong.
So here's my problem, my device has developed halo all around it when the bg color gets grey. Most of the time , it's not obvious. I can live with that. Recently, my screen starts to show me some tv-like stripes every now and then, it doesn't last long. after one second or two, it disappera and then it'll show from time to time.
I'm afraid it's just the start. It's similar to most of the issue ppl claim as screen flikering or screen jittering or shaking screen, it's a bit different though.
Has anyone encountered the same issue. More importantly, has anyone found any solutions yet? I searched google and failed to find answers. And i looked into it on Baidu,a chinese search engine, where i found some answers that claims it's not the screen issue ,instead , it's just the ribbon cable is lose. And anyone who replace a new screen for that is stupid.I'm just not sure about this.
My phone was bought on the internet and shipped to China, thus, I don't have warranty to rely on. And my phone is only 10 months old. I never dropped it and i have kept it well.(LG logo on the rear back still falls off), I just don't get why LG made this so vulnerable.
Even though i have ordered the nexus 6, my g2 running CM12 is still crazily fast and I don't want to give up on it. I'm so happy about my d802 except for all issues about the screen.
Any help would be aprreciated. Thanks again. Hi all dear members. Since the first day i bought this phone i've been seeing lots of screen issues about it but i never thought i would have one. It's proved me wrong.
So here's my problem, my device has developed halo all around it when the bg color gets grey. Most of the time , it's not obvious. I can live with that. Recently, my screen starts to show me some tv-like stripes every now and then, it doesn't last long. after one second or two, it disappera and then it'll show from time to time.
I'm afraid it's just the start. It's similar to most of the issue ppl claim as screen flikering or screen jittering or shaking screen, it's a bit different though.
Has anyone encountered the same issue. More importantly, has anyone found any solutions yet? I searched google and failed to find answers. And i looked into it on Baidu,a chinese search engine, where i found some answers that claims it's not the screen issue ,instead , it's just the ribbon cable is lose. And anyone who replace a new screen for that is stupid.I'm just not sure about this.
My phone was bought on the internet and shipped to China, thus, I don't have warranty to rely on. And my phone is only 10 months old. I never dropped it and i have kept it well.(LG logo on the rear back still falls off), I just don't get why LG made this so vulnerable.
Even though i have ordered the nexus 6, my g2 running CM12 is still crazily fast and I don't want to give up on it. I'm so happy about my d802 except for all issues about the screen.
Any help would be aprreciated. Thanks again.
Hi, I also have a problem with the screen on my lg g2, appeared to me that the white line disappears and comes back, when I do print screen and transfer the image on the computer that line is not visible, and that line is not always the same intenziteta.Try to do print screen and set an image or we send the mail to compare the problem
i'm so pissed about the screen, yes, my gnex bought 3 years ago looks yellow and ****ty. but other than that, totally fine, but for g2, ive read so many complaints about it. Guess no one has figured it out. Maybe I will open my phone and try to figure out when the screen completely goes crazy. During I type, it has happed for 4 times . so very annoying.
Sent from my LG-D802 using XDA Free mobile app
I think you should try to put in some rom, I hope it's a software problem, I found the solution for my phone cloudy g3:good:
i flash different cm12 nightlies. i don't think its a software related issue. I'm not the only one with this issue. Yesterday I opened this phone ,well with my fingernails. And coz I didn't have the right screwdriver, I wasn't able to open that black cover at the button down bellow the battery, but I cleared the places around the USB port and there's a black tape glued near the camera , I pressed it and I put the phone together and guess what, the problem was gone for one day, and I will continue to keep an eye on it.
Sent from my LG-D802 using XDA Free mobile app
Hello togehter,
i have a problem with my Samsung Galaxy S7 Edge. I used it normaly was just on the internet as a green line appiered on the screen on the right side very close to the edge. It goes all the way up and down. I also noticed that my phone overheated heavy as this happened so i tured it off. After a moment i turned it on again but the problem is still there. There is still this small green line and the phone still gets hot. Now it is also rather hot today outside is there anything i could do to try to fix it?
Not sure what your green line looks like but this may prove helpful:
https://www.s7fanclub.com/2016/06/fix-galaxy-s7-edge-pink-green-tint-amoled-screen.html
You'll have to RMA your phone. It's a hardware problem for sure. I had the same thing where the top portion of the phone heats up and eats battery like crazy whenever the screen is on. It would do this even in recovery mode.....which is the true test to see if it is your Android build or any software installed causing issues....at least with the heat anyway. The more it heated up, the more the lines appeared until the screen would either cut out for a moment or I'd get the over temp warning....even when not charging.
I agree with xmind2006, you should RMA it. I would not keep a device that heats up like that around. It could lead to most drastic device failures that you tend to read in the news.
I turned it on one more time yesterday and the screen went completly crazy directly. Going on and off, making random colors and so on. Im gonna bring it on Monday to the O2 Shop... Is this a common issue? Do you guys think i could ask them to get a fully new one directly? I dont want to wait weeks for them to repair... specially as i made my sim card smaller so it doesnt match my old phone anymore :X
Hello,
The left side of the screen shows some Missingno type glitching (I've attached some pics)
Does anyone know where this type of problem comes from?
I had the screen replaced and it worked beautifully afterwards for a couple of days...
I also installed system updates.. so I'm wondering; is this a hardware or software issue?
Thanks for your time and interest
/Shady69
Happened to my wife. Needed to be returned and fixed, hardware glitch not software. I am not sure if it was a screen issue or some other hardware.
Sent from my XT1575 using Tapatalk
Did you have the screen replaced because of the screen flashing, or did the flashes start only after you had the screen replaced?
If the problem has been consistent over the course of two different screens, it would point towards a hardware fault on the sending end of the display connector, right where the ribbons leave the motherboard.
If this problem is brand-new, it might just be that the display connector was not fully secured when the new screen was installed.
Mine is doing the exact same thing. Left side goes all grey and static looking.
I took it apart and reseated the screen ribbon connector and at first I thought it made a difference, but now it continues to glitch out. I took it apart a second time and it has the half screen right at boot up. Sometimes it goes away just setting on the desk but seems to come back regularly. Its only the visual part of the screen, the touch points are still all in the same locations. And when I took a screen shot while it was glitching, the screen shot came out normal. So I am hoping its only the screen/digitizer that is going bad.
I am going to buy a new screen and see if that fixes it. Its only $60 on eBay and its pretty simple to take apart. I will post back if it fixes the problem. That way if someone else has the issue they will know.
Moto x style display problem
I have got the similar problems with display and I will return for warranty repair. I will tell you later what happened.
Downgrade to Lollipop , It worked for me.!
...
(This is the tip for everyone)
I replaced the screen and that seems to have fixed it for now. I haven't had much chance to use it since the screen replacement though. I will update in the next week or so and let everyone know how the screen replacement holds up.
The replacement screen only lasted about a week and now the righthand side has glitched out. I am going to take it apart and put it back together but i think its time for a new phone.
These phone are getting cheap and I really like it so I may just get another. Although the lure of a dual sim version is attractive.
I have this beautiful and powerful phone LeEco Pro 3 that i`ve been using for half an year or so with AOSIP ROM. Its a wonderful phone with an amazing performance.
The thing is my display started a problem history that has become a long history i will try to resume in a few words.
It started in one day i pressed the power button in order to light the display on and check something in an APP i needed. I found out that before the display lighted on some weird colors and artifacts appeared on screen. But indeed the display worked fine.I thought it was just a temporary thing and just kept using it until In the second day that the weird colors and artifacts became permanent, so i realized i was in trouble. :crying:
Tried sending the phone to technical assistance.
The first one - Told me that they could get a new display for testing but indeed the results were the same and they were seeing oxidation in the display connector on the board, not the display flex cable but the main board connection. They said they would not go further into it and they decided to give the phone back to me. Weird thing is that when i turned the phone one it worked for one day without issues. He said the phone was in the same condition, but that is not what i saw. The problem indeed happened again one day later , but it was less worse as i could at least see the screen, but almost half the screen was horribly shaking, trembling.
The second one - Once the tech guy looked the phone he said he didnt see any sign of the phone getting opened. He said he would be seeing signs of glues or anything like that but in his opinion it was definitely not opened. But he warned me the display could physically brake once he opens it as the phone got contact with oxidation in the toilet(I used to left it in the toiled while i take bath). So i was afraid and decided to back off.
The third one - Said he could not find any display so he sent the phone back to me. Didnt open it at all as he was trying to wait for the new display to arrive in order to be safe. They said they are 90% sure its display replacement would do the job. The thing is - if i used in hot environments the issues seems to slowly disappear . If i use it in cold environments the problems seems to get worse
So here i am. I CAN buy another screen over the internet. But i am afraid if it will work or not. Have anyone there faced same issue? What do you recommend me to do? What would you do
Thanks in advance
VicPereira said:
I have this beautiful and powerful phone LeEco Pro 3 that i`ve been using for half an year or so with AOSIP ROM. Its a wonderful phone with an amazing performance.
The thing is my display started a problem history that has become a long history i will try to resume in a few words.
It started in one day i pressed the power button in order to light the display on and check something in an APP i needed. I found out that before the display lighted on some weird colors and artifacts appeared on screen. But indeed the display worked fine.I thought it was just a temporary thing and just kept using it until In the second day that the weird colors and artifacts became permanent, so i realized i was in trouble. :crying:
Tried sending the phone to technical assistance.
The first one - Told me that they could get a new display for testing but indeed the results were the same and they were seeing oxidation in the display connector on the board, not the display flex cable but the main board connection. They said they would not go further into it and they decided to give the phone back to me. Weird thing is that when i turned the phone one it worked for one day without issues. He said the phone was in the same condition, but that is not what i saw. The problem indeed happened again one day later , but it was less worse as i could at least see the screen, but almost half the screen was horribly shaking, trembling.
The second one - Once the tech guy looked the phone he said he didnt see any sign of the phone getting opened. He said he would be seeing signs of glues or anything like that but in his opinion it was definitely not opened. But he warned me the display could physically brake once he opens it as the phone got contact with oxidation in the toilet(I used to left it in the toiled while i take bath). So i was afraid and decided to back off.
The third one - Said he could not find any display so he sent the phone back to me. Didnt open it at all as he was trying to wait for the new display to arrive in order to be safe. They said they are 90% sure its display replacement would do the job. The thing is - if i used in hot environments the issues seems to slowly disappear . If i use it in cold environments the problems seems to get worse
So here i am. I CAN buy another screen over the internet. But i am afraid if it will work or not. Have anyone there faced same issue? What do you recommend me to do? What would you do
Thanks in advance
Click to expand...
Click to collapse
There are many many post on this subject, recently in fact. That has links. In fact, you can find them on Alibaba that are all black and made specifically for the Le Pro 3. Here is a link of a guy who used the cool s1 display
Yes it sounds like the display or the flex cables.
Link 1
Here you go cheap and they have the black one
tsongming said:
There are many many post on this subject, recently in fact. That has links. In fact, you can find them on Alibaba that are all black and made specifically for the Le Pro 3. Here is a link of a guy who used the cool s1 display
Yes it sounds like the display or the flex cables.
Link 1
Here you go cheap and they have the black one
Click to expand...
Click to collapse
Thank you!
So i can go on and buy another display . Would you do it without worrying?
In the country i live in the display costs 189. The phone costs 900 or 1000.