Camera not working. - Galaxy S3 Neo Q&A, Help & Troubleshooting

Hi!
I have this camera problem.. When I open up the camera app on the stock rom I get this "Warning": MediaServer failed. Camera needs restart. I also attached the screenshot. I tried clearing camera app cache and gallery app cache aswell. After some googling and messing with it I got so pissed that I cleared the data, cleared cache and factory resetted the phone. When this didn't work, I flashed the stock rom again with odin, and still having this issue. Please help! Thanks for any help.
EDIT: I got it fixed by flashing the I9301IXXUANH1 version.

Maybe it is hardware problem... Open your phone and check connectors. Also send me logcat when that happens

Rox said:
Maybe it is hardware problem... Open your phone and check connectors. Also send me logcat when that happens
Click to expand...
Click to collapse
What do you mean connectors? The camera was working before, I tried some roms, didnt like it, went back to stock now having these issues. (I kinda don't believe it's a hardware issue because the device is pretty new.)By the way, I typed in *#0*# in the dialler and got to that testing area idk what it's called, anyways, I tried Front cam there, and it was working, tried Mega cam and boom: Warning: "camera failed". Can you explain what a logcat is? XP, I am no expert in these things, i'm sorry, and my english isn't the best too.

Ehh, when I first rooted the phone, I made a backup using TWRP, now I flashed the backup and camera works. So firmware downloaded from sammobile.com wasn't good. I had a issue with battery life aswell with the firmware downloaded from that page. I am not blaming anyone just it didn't work for me. Thank you for trying to help @Rox

Samsung used 2 different camera sensors in Productions of phones. Imx175 and s5k4h5yb . some firmwares work for one and some for other sensors. NI* and NJ* firmwares are working for s5k4... And other firmwares are working for imx175 sensors .. There i no firmware that works for both sensors... I sent message to samsung to release firmware that is working for both sensors...

camera not working
Hey, I got the same problem...
I tried CM12 on my S3 neo I9301I and used some camera fix for it (idk why or was it necessary..) and then reverted back to the official ROM (from sam mobile).... Since that my cam has given that error... I'd love if you tell me which rom worked for you...
Also the cam works with custom ROMs, it's not a hardware problem for sure...

Im using stock ( 4.4.2) on my i9301 and i have got camera problem also. When i enter camera i get message" Camera failed" ,sometimes get "Mediaserver failed" . I bought this phone a month ago,and didnt root it. When i restart phone camera works. This error appears once a day.
Rox,imas li pretpostavki sta moze uzrokovati greske u kameri?

Galaxy S3 Neo
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
---------- Post added at 02:41 AM ---------- Previous post was at 02:36 AM ----------
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
---------- Post added at 02:43 AM ---------- Previous post was at 02:41 AM ----------
Dzonny05 said:
Im using stock ( 4.4.2) on my i9301 and i have got camera problem also. When i enter camera i get message" Camera failed" ,sometimes get "Mediaserver failed" . I bought this phone a month ago,and didnt root it. When i restart phone camera works. This error appears once a day.
Rox,imas li pretpostavki sta moze uzrokovati greske u kameri?
Click to expand...
Click to collapse
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works

@morzafigas I confirm that it really works.

Can i install 4.4.4 kit kat(i9300) on my i9301?

Dzonny05 said:
Can i install 4.4.4 kit kat(i9300) on my i9301?
Click to expand...
Click to collapse
no it will break your smartphone
maybe 9301 will get 5.0.2
i hope

@morzafigas Yep, works for me too.

Just want to confirm that flashing I9301IXXUANH1 fixed the "MediaServer failed" errors. Thanks!

Nop
morzafigas said:
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
---------- Post added at 02:41 AM ---------- Previous post was at 02:36 AM ----------
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
---------- Post added at 02:43 AM ---------- Previous post was at 02:41 AM ----------
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
Click to expand...
Click to collapse
Didnt work in mine case still camera failed

Formingus said:
Didnt work in mine case still camera failed
Click to expand...
Click to collapse
mine too

Skype or Viber problem....
some people say if you remove skype or viber it will work fine???
But,if you need them,than what to do?
I9301IXCUANJ6,I9301IXDUANK1 and I9301IXCUAOA1 not working for me...
Will try I9301IXXUANE1 tommorow and report

I had a same problem, try to use XCUANL1... (from sammobile, Serbia download) an flash via Odin 3.09
Now works perfect

Hi all. If i install I9301IXXUANH1 from Sammobile will i have problem with warranty from samsung?

morzafigas said:
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
---------- Post added at 02:41 AM ---------- Previous post was at 02:36 AM ----------
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
---------- Post added at 02:43 AM ---------- Previous post was at 02:41 AM ----------
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
Click to expand...
Click to collapse
But that was the stock rom I used and I have the same problem with my front cam. I downloaded it two days ago.

morzafigas said:
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
---------- Post added at 02:41 AM ---------- Previous post was at 02:36 AM ----------
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
---------- Post added at 02:43 AM ---------- Previous post was at 02:41 AM ----------
Hello people
Great news, to fix S3 Neo camera server error you need to install stock rom I9301IXXUANH1 from Sammobile.
It really works
Click to expand...
Click to collapse
this rom I9301IXCUANJ4_I9301IBTUANJ1_I9301IXXUANF2 for United Kingdom worked for me

Related

[Q] Galaxy s4 knox BTL locked issue PLEASE HELP

Hello ... i have an i9505..that i recently unlocked using an old firmware...the problem is...once i flashed that firmware my phone has no sound...can't call...wifi problems... i have tried over 15 other firmwares...stock and operator FW ... pit or no pit...can't find a solution...on many of them i get abott /// (failed "auth" ) ...and FW that are compatible with the new bootloader from samsung wont fix my sound/call/wifi problems... anyone can help me with this please ... thanks
did the corresponding wipes?
---------- Post added at 02:11 PM ---------- Previous post was at 01:43 PM ----------
BladERaJJJ said:
Hello ... i have an i9505..that i recently unlocked using an old firmware...the problem is...once i flashed that firmware my phone has no sound...can't call...wifi problems... i have tried over 15 other firmwares...stock and operator FW ... pit or no pit...can't find a solution...on many of them i get abott /// (failed "auth" ) ...and FW that are compatible with the new bootloader from samsung wont fix my sound/call/wifi problems... anyone can help me with this please ... thanks
Click to expand...
Click to collapse
something similar happened to me .. was 4.2 and I had to upgrade to 4.3
---------- Post added at 02:38 PM ---------- Previous post was at 02:11 PM ----------
BladERaJJJ said:
Hello ... i have an i9505..that i recently unlocked using an old firmware...the problem is...once i flashed that firmware my phone has no sound...can't call...wifi problems... i have tried over 15 other firmwares...stock and operator FW ... pit or no pit...can't find a solution...on many of them i get abott /// (failed "auth" ) ...and FW that are compatible with the new bootloader from samsung wont fix my sound/call/wifi problems... anyone can help me with this please ... thanks
Click to expand...
Click to collapse
something similar happened to me .. was 4.2 and I had to upgrade to 4.3
D!3G0 #1 said:
did the corresponding wipes?
Click to expand...
Click to collapse
each and every time
D!3G0 #1 said:
did the corresponding wipes?
---------- Post added at 02:11 PM ---------- Previous post was at 01:43 PM ----------
something similar happened to me .. was 4.2 and I had to upgrade to 4.3
---------- Post added at 02:38 PM ---------- Previous post was at 02:11 PM ----------
something similar happened to me .. was 4.2 and I had to upgrade to 4.3
Click to expand...
Click to collapse
right now i have i9505XXEUMK8 ... no sound..wifi works...black screen when calling..no sound in call speaker or headset
BladERaJJJ said:
right now i have i9505XXEUMK8 ... no sound..wifi works...black screen when calling..no sound in call speaker or headset
Click to expand...
Click to collapse
Guys, what's the problem?
when I was on 4.2.2 I successfully flashed (from here, 9505 with pit. Just wipe data, cache, dalvik cache...)
Germany DBT (October 2013) (firmware with Enforcing SELinux. SECURED BOOTLOADER WILL BE FLASHED, NO DOWNGRADE)
PDA: I9505XXUEMJ5
CSC: I9505OXAEMJ5
MODEM: I9505XXUEMJ5
Version 4.3
firmware and am happy using it right now. 2 yellow text lines on every boot doesn't change anything...
Now am running the same firmware with thisROM (Very complicated to install, but its very very very fast and smooth
P.S. If you have issues with ROOT and CWM/recovery menu - reply (this) my comment and explain what's wrong
erikasnoske said:
Guys, what's the problem?
when I was on 4.2.2 I successfully flashed (from here, 9505 with pit. Just wipe data, cache, dalvik cache...)
Germany DBT (October 2013) (firmware with Enforcing SELinux. SECURED BOOTLOADER WILL BE FLASHED, NO DOWNGRADE)
PDA: I9505XXUEMJ5
CSC: I9505OXAEMJ5
MODEM: I9505XXUEMJ5
Version 4.3
firmware and am happy using it right now. 2 yellow text lines on every boot doesn't change anything...
Now am running the same firmware with thisROM (Very complicated to install, but its very very very fast and smooth
P.S. If you have issues with ROOT and CWM/recovery menu - reply (this) my comment and explain what's wrong
Click to expand...
Click to collapse
i've tried I9505XXUEMJ5 too....still same problem
BladERaJJJ said:
i've tried I9505XXUEMJ5 too....still same problem
Click to expand...
Click to collapse
Well... First read everything
Try to install CWM or philz touch recovery meniu. Then when you there, format everything including data, system etc... But don't format SD card, becouse it doesn't change anything.... than try to flash your phone via odin using 3.09 version (I used it - I succeed) using pit file also from HERE (at the bottom pit files, odin, everything you need to download...)
Talking about format data, system etc... am not sure if it not brick your phone, becouse I never tryed, but therefore Odin installs everything for you, so... Need experienced XDAers to appear in this thread and confirm if it's ok...
BladERaJJJ said:
i've tried I9505XXUEMJ5 too....still same problem
Click to expand...
Click to collapse
I am in the same situation, could you fix your problem? if yes, how?

[please help!] Flashed wrong CWM now touch is out of sync

Hello guys,
Just yesterday I was trying to install CWM on my N910G (Singapore ver. i believe), and after installing the custom ROM (Dr.Ketan) i realised touch would work but out of place. (when I touch the middle, the phone thinks I'm touching the right hand side). Then today I looked at the CWM file I downloaded, the name is N915G (note edge)... so now I think I know what the problem is. Probably due to the resolution difference, touch works as on the note edge even though I have the note 4.
I tried flashing stock ROM, everything works fine but the touch issue didn't go away....
Do you guys have any suggestions for this problem? thanks a lot!
I have found the fix though this thread: http://forum.xda-developers.com/note-4/help/huge-problem-help-t3071738/post59906604#post59906604
Basically just enter *#2663# into the dialer and then click TSP FW Update.
search somewhere here. There people who had this problem before... spen works fone right? So use the spen to go service mode where you can update/calibrate your screen... forgot the dial code but it's not the *#0*#
---------- Post added at 12:15 PM ---------- Previous post was at 12:14 PM ----------
oops..! ? you found it already.

I'm from Philippines. Is it fine to install India's Lollipop Firmware for Galaxy E5?

The Philippines haven't got any Android 5.1.1 (Lollipop) update for Galaxy E5 (SM-E500H) yet (click), but India (click) has already. I'd like to know if it is fine to install theirs for my device. And, what are the implications if I do?
Device Status
- unlocked
- rooted
- using stock recovery
Thanks XDA peeps!
Hi
Hey Buddy,
I used the ROM in the link you provided & flashed it on my E5 purchased in UAE & its working great. Go give it a try
what is your model number?
It's fine to do so, please post a feedback for after update performance, As I'm hesistating to update or not, and If you have any games like Asphalt 8, does it still performa good on Android Lollipop?
Thanks in advance
Great Performance
Hassan 4 said:
It's fine to do so, please post a feedback for after update performance, As I'm hesistating to update or not, and If you have any games like Asphalt 8, does it still performa good on Android Lollipop?
Thanks in advance
Click to expand...
Click to collapse
Everything works fine. It is a smooth ROM with good battery life.
Guys need help . I updated to lollipop too . But now I want to go back to kitkat so that I can root .
how can I downgrade back to kitkat . Help please
Now that we got lollipop on e5, anybody has come up with a way to root it?
None I believe .. it's requirement is to be running on kitkat.
I still tried to root mine , to try it out
result: stuck on Samsung logo then screen turns green.
after this I just flashed my lollipop rom . Then I'm back to lollipop .not rooted
Did the same thing, updated it to Lollipop. It works well. But the thing is there's not yet any way to root a Lollipop updated E5. However I did try to root it, following its Kitkat's rooting procedure which caused it to froze up on Samsung logo (bootloop) plus followed by the screen turning green.
So now, it's back to Kitkat as I'm so used to using phones with xposed modules. But I'll update it once there's a Lollipop root available.
Cheers!
Sent from my GT-I8552 using XDA Free mobile app
Wait ... you're running on kitkat now Bro ? Or lollipop ?
Galaxy e5 ? Did you root your e5 when it was running on lollipop ?
Am on lollipop waiting for lollipop root,
Yeah same here ... hope they make procedures on how to root e5 running on lollipop 5.1.1
---------- Post added at 08:23 AM ---------- Previous post was at 08:15 AM ----------
Oh yeah Endroyed I also flashed India lollipop . For me battery life of kitkat is much better than lollipop .
I find lollipop has better battery life than kitkat. The only thing I miss is root
Hey mtadao can you send me some screens hots of your e5 lollipop what version are you using 5.1.1 ?
I flashed the Indian version from Sammobile. Actually the phone appearance changed very little if any and no bloatware was added
Yeah ... we have the same . Firmware .. .
---------- Post added at 07:25 AM ---------- Previous post was at 07:23 AM ----------
I wish I could root my E5 running on lollipop
New update for 5.1.1 has been released 244MB. i have downloaded it but i don't see anything new although they say it's fixing bugs, security etc. Check it out
yeah ... i also heard about it the update .. they say it fixed palm selfie
I am trying to root it with kingroot app, but no use so far.
The available strategy doesn't work for me,but give it a try, it might work for you.
Sent from my SM-E500H using XDA Free mobile app
Yeah .me too.. I try using odin ... but no luck ... screen turns green ... then I flash the lollipop firmware again .
---------- Post added at 06:02 AM ---------- Previous post was at 06:00 AM ----------
Please update me .. if you find a way to root e5 running on lollipop . Okay bro thank you
---------- Post added at 06:03 AM ---------- Previous post was at 06:02 AM ----------
Please update me bro if you find a way to root e5 running on lollipop
..or downgrade to kitkat ..thank you

a500w stock recovery/firmware

Hi all, this is my first post on XDA. I was wondering if anyone had the stock recovery/firmware of the galaxy a5 a500w model (it kinda just came out in canada). I need this asap to flash it back to the og firmware.
Kind regards, benz.
 a500w stock recovery/firmware
I cant find any info or help on this subject anywhere on the net. . My a5 sm-a500w is stuck in odin mode. I would usually just use keis or odin. But, there is no firmware, custom roms, or even info on what other firmware might work to unbrick this stupid Canadian phone.
The phone is screwed with out some sort compatable rom..
PLEASE HELP!!!!! ITS NOT LIKE ITS A SUPER NEW PHONE ANYMORE.
THANK YOU. PLEASE MESSAGE ME IF U HAVE ANY IDEAS OR BREAKS
Try Samsung Smart Switch software. I couldnt find any info on that model
---------- Post added at 09:01 AM ---------- Previous post was at 08:57 AM ----------
http://forum.gsmhosting.com/vbb/f77...shing-updating-amp-manage-user-datas-1986895/
jnvdh06 said:
Try Samsung Smart Switch software. I couldnt find any info on that model
---------- Post added at 09:01 AM ---------- Previous post was at 08:57 AM ----------
http://forum.gsmhosting.com/vbb/f77...shing-updating-amp-manage-user-datas-1986895/
Click to expand...
Click to collapse
Not supported. Any other way to recover this device?

Camera don't focus on any rom, Galaxy s5 G900F

HI all... I' m almost new in xda and i want to see if someone can help me... since months i can' t get my galaxy s5 camera to focus... I have tried a lot of roms, done lots of wipe but nothing changed... my camera focus but done it, unfocus automatically... if someone can help I would be grateful.
Sorry for my bad english but i'm italian
s3forever said:
HI all... I' m almost new in xda and i want to see if someone can help me... since months i can' t get my galaxy s5 camera to focus... I have tried a lot of roms, done lots of wipe but nothing changed... my camera focus but done it, unfocus automatically... if someone can help I would be grateful.
Sorry for my bad english but i'm italian
Click to expand...
Click to collapse
are you running AOSP or TouchWiz ROMs?
Now I' m running cyanogemod 13... But happened the same when i reflashed stock rom
grab the tar.md5 from sammobile.com, wipe the internal in twrp, delete the android folder from your sd card and flash the tarball in Odin. Ive been having nothing but issues with the aosp environment and the camera... its annoying
youdoofus said:
grab the tar.md5 from sammobile.com, wipe the internal in twrp, delete the android folder from your sd card and flash the tarball in Odin. Ive been having nothing but issues with the aosp environment and the camera... its annoying
Click to expand...
Click to collapse
Which tar i have to download ? The entire firmware from sammobile?
Yeah, the whole 1.5 GB. Sammobile is the most secure and trustworthy place, but sometimes you can find them on android file host
---------- Post added at 12:35 AM ---------- Previous post was at 12:05 AM ----------
http://www.sammobile.com/firmwares/database/SM-G900F/
Here's the link you'll want. You'll just have to look for the one for your carrier. I recall seeing something that if you flash a 6.0 tar.md5 you might not be able to get root back, but if I had to choose between root and a working camera, I'd choose the camera
Vodafone Italy
http://www.sammobile.com/firmwares/database/SM-G900F/OMN/
From there you can use the drop down above the firmware links to choose your carrier. I'd stick with a 5.0 based firmware to avoid potential issues that could arise. For instance, on the g900p (American sprint model) if you flash a 6.0 tar.md5, you can't install custom lollipop or kitkat ROMs, only marshmallow ones
youdoofus said:
Yeah, the whole 1.5 GB. Sammobile is the most secure and trustworthy place, but sometimes you can find them on android file host
---------- Post added at 12:35 AM ---------- Previous post was at 12:05 AM ----------
http://www.sammobile.com/firmwares/database/SM-G900F/
Here's the link you'll want. You'll just have to look for the one for your carrier. I recall seeing something that if you flash a 6.0 tar.md5 you might not be able to get root back, but if I had to choose between root and a working camera, I'd choose the camera
Vodafone Italy
http://www.sammobile.com/firmwares/database/SM-G900F/OMN/
From there you can use the drop down above the firmware links to choose your carrier. I'd stick with a 5.0 based firmware to avoid potential issues that could arise. For instance, on the g900p (American sprint model) if you flash a 6.0 tar.md5, you can't install custom lollipop or kitkat ROMs, only marshmallow ones
Click to expand...
Click to collapse
Yeah it' s okay but you mean to reset the phone and flash the stock 6.9 firmware?? Because i' ve already done it a lot of times but the camera problem is always there
You've done Odin flashes?

Categories

Resources