I've found a workaround for the WiFi!!!
The workaround is:
1- Flash the Philz recovery ver 6.0.4.7 (thanks to @Cloudyfa and @parkjh0821) from here: http://mirror.nindi.kr.pe/rom/?loc=Recovery/LG_G2/
2- Flash CM12 ROM (build 24-12) by @parkjh0821 (http://mirror.nindi.kr.pe/rom/Android_L/LG_G2/cm-12-20141224-UNOFFICIAL-f320.zip) + Gapps
3- Clear Dalvik cache
4- Flash Supersu BETA v2.38 in recovery from here: http://www.tusfiles.net/vyrt44bcailf
5-Boot UP! Then WiFi will be working (if not try re-flashing SuperSu again)
6- Everytime the phone powers off you need to re-flash SuperSu BETA v2.38 in order for WiFi to work again
I Don't know why it works or how. It just gets the WiFi working on my device that's all I know
Press Thanks Button if this helped you
To Fix Hot Reboots: by @parkjh0821
1- Open play store. and download "Wake Lock - PowerManager"
2- open "Wake Lock -PowerManager", set "PARTIAL_WAKE_LOCK"
For Future posts
r03ter said:
To Fix Hot Reboots: by @parkjh0821
1- Open play store. and download "Wake Lock - PowerManager"
2- open "Wake Lock -PowerManager", set "PARTIAL_WAKE_LOCK"
Click to expand...
Click to collapse
i do this solution but not work on my device F320L
linema56 said:
i do this solution but not work on my device F320L
Click to expand...
Click to collapse
Can you show me a screenshot of the app you installed?
soft reboot not fixed
"Wake Lock -PowerManager", set "PARTIAL_WAKE_LOCK" but when screen off or press lock button then soft reboot. Any solution for soft reboot? My device lg g2 f320s
Dashkaa said:
"Wake Lock -PowerManager", set "PARTIAL_WAKE_LOCK" but when screen off or press lock button then soft reboot. Any solution for soft reboot? My device lg g2 f320s
Click to expand...
Click to collapse
Try disable lift to wake from (settings-> display)
Secondly... Did you flash Supersu 2.38 from the link above?
This is my wake lock interface?
linema56 said:
This is my wake lock interface?
Click to expand...
Click to collapse
Chose option 5.. Partial Wake Lock
Make sure you have SuperSu also
r03ter said:
Chose option 5.. Partial Wake Lock
Make sure you have SuperSu also
Click to expand...
Click to collapse
Of cause that's what i did hot reboot never stop
linema56 said:
Of cause that's what i did hot reboot never stop
Click to expand...
Click to collapse
Try turn off the Wi-Fi first...then turn off the screen
and make sure that you have the same setting as this
What ROM and kernel are you using?
I hate my F320K because of this.
I want a good Lollipop rom so bad
balanik said:
I hate my F320K because of this.
I want a good Lollipop rom so bad
Click to expand...
Click to collapse
If you look on the bright side... Our variant will be supported when lollipop is Bug-free and stable.... So we are paying some patient and more time for a better rom and quality
r03ter said:
If you look on the bright side... Our variant will be supported when lollipop is Bug-free and stable.... So we are paying some patient and more time for a better rom and quality
Click to expand...
Click to collapse
Try to test with F320L (downgrade to JB 4.2 First), please.
Related
Hi, i decided to root my phone and all is fine, its running
My first question is regarding adding patched, i wish to add the stock fonts patch but have no idea how to do this
the next is the press track ball to unlock phone, when in a call, is there a way of setting it so the key pad expands automatically?
thanks for your time
You flash a patch like you flash a ROM, except you don't wipe the data when you do so.
Sent from my HTC Legend using XDA App
Asovse1 said:
You flash a patch like you flash a ROM, except you don't wipe the data when you do so.
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
Hi, when i get into the custom recovery and select 'flash zip from sdcard' its gets to 'Verifying update package' and then gives a no signature error
so i need to add something to the zip i downloaded?
OK i have done the patch now just the screen wake ? remains
NRGman said:
OK i have done the patch now just the screen wake ? remains
Click to expand...
Click to collapse
What do you mean "screen wake"?
What is it you are trying to achieve?
mkhattab said:
What do you mean "screen wake"?
What is it you are trying to achieve?
Click to expand...
Click to collapse
Well, when your in a call and you move the phone away from your ear, the proximity sensor pics up this action and turns the back-lit display, my question its would it be possible to set it to automatically open the virtual keypad at the same time?
thanks
Has anyone seen a power button mod for our tablets? I know the transformer has one. Just so that when I long press power button I can reboot or get into recovery instead of only being able to shut off the device.
Sent from my GT-I9100 using xda premium
root and install cwm... gives the option of shutdown, reboot, recovery, (and this is possibly just in thor's rom, but) statusbar toggler.
smhism said:
root and install cwm... gives the option of shutdown, reboot, recovery, (and this is possibly just in thor's rom, but) statusbar toggler.
Click to expand...
Click to collapse
Yea, check out THOR's ROM. With his ROM, you press and hold the power button and are given the options to shut down, reboot, reboot into recovery, or open his special status bar mod.
Yeah but auto brightness and rotation lock don't work on Thor ROM correct?
Sent from my A500 using xda premium
comnam90 said:
Has anyone seen a power button mod for our tablets? I know the transformer has one. Just so that when I long press power button I can reboot or get into recovery instead of only being able to shut off the device.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
There's an app called RomToolbox. It's designed for phones, but, it has the boot options in the app. So far, I've ran several of the options on my 501 and haven't had but 1 fc on the animation viewer.
But the boot menu seems to work.
So it seems to function, HOWEVER, some of the options I wouldn't advise using on your tab, because it's a phone app.
Moscow Desire said:
There's an app called RomToolbox. It's designed for phones, but, it has the boot options in the app. So far, I've ran several of the options on my 501 and haven't had but 1 fc on the animation viewer.
But the boot menu seems to work.
So it seems to function, HOWEVER, some of the options I wouldn't advise using on your tab, because it's a phone app.
Click to expand...
Click to collapse
Quick Boot is another app specifically for reboot options. Thor's ROM is the only one I've tried that has reboot options when long pressing the power button.
Bloodflame said:
Quick Boot is another app specifically for reboot options. Thor's ROM is the only one I've tried that has reboot options when long pressing the power button.
Click to expand...
Click to collapse
Thors Revolver Rom, was originally ported from an Asus Transformer, which has those boot options. There's one other Transformer port that has it.
Bloodflame said:
Quick Boot is another app specifically for reboot options.
Click to expand...
Click to collapse
Quickboot works great. And Free!
Moscow Desire said:
Quickboot works great. And Free!
Click to expand...
Click to collapse
Ok thanks Will give quickboot a go
comnam90 said:
Ok thanks Will give quickboot a go
Click to expand...
Click to collapse
Just remember, there is no Fastboot with the Iconia.
It will just do a normal reboot.
Moscow Desire said:
Just remember, there is no Fastboot with the Iconia.
It will just do a normal reboot.
Click to expand...
Click to collapse
There's also a paid version which allows you to hide the options you don't/can't use But yeah, the free version is good enough
I gave in, flashed thors ROM lol
Now how do I fix it so it doesn't say it's an epad?
Sent from my EPAD using xda premium
comnam90 said:
Yeah but auto brightness and rotation lock don't work on Thor ROM correct?
Sent from my A500 using xda premium
Click to expand...
Click to collapse
Correct, but there is a rotation lock soft key when you click on the notification tab in the bottom right. You can also manually adjust the screen brightness here too, which is what I always did even with stock ROM.
In terms of changing the model name from EPAD, I'm not sure........ I never saw a need to change that.
hot reboot
Moscow Desire said:
Just remember, there is no Fastboot with the Iconia.
It will just do a normal reboot.
Click to expand...
Click to collapse
Widgetsoid seems to have a hot reboot option in which it skips the Acer boot screen and starts immediately with the bootanimation. SAVES A FEW SECONDS. HAVENT NOTICED ANY ILL EFFECTS WHEN IVE TRIED IT.
It has
Power off
Normal reboot
Hot reboot
Recovery
Bootloader
comnam90 said:
I gave in, flashed thors ROM lol
Now how do I fix it so it doesn't say it's an epad?
Sent from my EPAD using xda premium
Click to expand...
Click to collapse
check the themes and apps forum for a thread with a modified build.prop for thor's rom.
you could also manually change the build.prop yourself
Rotation lock key? I dont see it?
hardslog said:
Correct, but there is a rotation lock soft key when you click on the notification tab in the bottom right. You can also manually adjust the screen brightness here too, which is what I always did even with stock ROM.
In terms of changing the model name from EPAD, I'm not sure........ I never saw a need to change that.
Click to expand...
Click to collapse
I dont see the lock soft key?
Enable Quick Controls in Settings - Thor Rom Parts
bytemehard said:
Widgetsoid seems to have a hot reboot option in which it skips the Acer boot screen and starts immediately with the bootanimation. SAVES A FEW SECONDS. HAVENT NOTICED ANY ILL EFFECTS WHEN IVE TRIED IT.
It has
Power off
Normal reboot
Hot reboot
Recovery
Bootloader
Click to expand...
Click to collapse
yeah, I believe what it does is some sort of cache dump and restarts the android system only. as far as I understand. but yeah, it should save a touch of time off a full boot. I think the most used option, or at least that,s important to me, is the boot to recovery option. a real lifesaver!!!!
Just installed the latest nightly 4.4.2 - 20140104 on my S4 - I9505 all done automatically.. Fantastic! However message popped up before the install saying.. Cant install from flash after update folder in OpenDelta cause SECURE MODE IS ENABLED! Help!
zormij said:
Just installed the latest nightly 4.4.2 - 20140104 on my S4 - I9505 all done automatically.. Fantastic! However message popped up before the install saying.. Cant install from flash after update folder in OpenDelta cause SECURE MODE IS ENABLED! Help!
Click to expand...
Click to collapse
That's pretty self-explanatory...
Entropy512 said:
That's pretty self-explanatory...
Click to expand...
Click to collapse
Thanks for you reply... I assume that I can only manually flash these files after an update?
zormij said:
Thanks for you reply... I assume that I can only manually flash these files after an update?
Click to expand...
Click to collapse
Have you tried turning it off, and leaving it off? I haven't used the delta system yet, but on my ROM/TWRP/phone, if I turn it off in recovery, then back into ROM and flash something that's not signed, the verification is still off and the flash succeeds.
... OR turn secure mode OFF.
Sent from my Find 5 using XDA Premium 4 mobile app
zormij, do you know how to turn secure mode off? (I'm thinking you don't).
In System Updates hit the menu button.
lynnux said:
zormij, do you know how to turn secure mode off? (I'm thinking you don't).
In System Updates hit the menu button.
Click to expand...
Click to collapse
Thank you... I have turned it off as you advised... and no I had no idea how to turn it off... I will advise if it works after next update
zormij said:
Thank you... I have turned it off as you advised... and no I had no idea how to turn it off... I will advise if it works after next update
Click to expand...
Click to collapse
Success! OTA Update all working automatically, including the flash after update folder contents... All I had to do was press the flash now button and presto.... All updated... Fantastic good work Omni people.. :good:
Today,actually everything was fine but,I tried to restart my Nexus cause of some issues(nvm),right after that I tried to start it and it won't start.
I mean it keep doing the startup animation for hours nonstop.
please help me!!!
:crying:
Re-flash rom
thx
Mashed_Potatoes said:
Re-flash rom
Click to expand...
Click to collapse
what is that?
can you give me a tutorial or something?
thx
talkChrisTucker said:
Today,actually everything was fine but,I tried to restart my Nexus cause of some issues(nvm),right after that I tried to start it and it won't start.
I mean it keep doing the startup animation for hours nonstop.
please help me!!!
:crying:
Click to expand...
Click to collapse
Are you rooted? Are you on Stock Rooted ROM? OR Non Rooted? If you don't know these words and reading them first time..type no.
Is your N4 rooted ?
sidnoit22 said:
Are you rooted? Are you on Stock Rooted ROM? OR Non Rooted? If you don't know these words and reading them first time..type no.
Click to expand...
Click to collapse
no root
blusydays said:
Is your N4 rooted ?
Click to expand...
Click to collapse
no root!
With no root, the only way to get rid of this bootloop is to factory reset, you can do it in recovery by pressing volume down + power at the same time, then you choose Recovery with the volume button. BUT you will loose everything ( pics, apps, etc. ).
But I hope that someone can give you another solution less "destructive".
blusydays said:
With no root, the only way to get rid of this bootloop is to factory reset, you can do it in recovery by pressing volume down + power at the same time, then you choose Recovery with the volume button. BUT you will loose everything ( pics, apps, etc. ).
But I hope that someone can give you another solution less "destructive".
Click to expand...
Click to collapse
Can he do a back up using ADB and then do a partial restoration after a factory reset?
Will adb backup work if the phone's not booting? .. I know that adb works when in a bootloop, but in the guide it shows a prompt to enter some encryption password ... I summon android wizards to answer this ...
Marvlesz said:
Can he do a back up using ADB and then do a partial restoration after a factory reset?
Will adb backup work if the phone's not booting? .. I know that adb works when in a bootloop, but in the guide it shows a prompt to enter some encryption password ... I summon android wizards to answer this ...
Click to expand...
Click to collapse
adb works with no os. that's how CM installer installs CM11 through usb (ADB) even when the phone can only enter recovery
talkChrisTucker said:
Today,actually everything was fine but,I tried to restart my Nexus cause of some issues(nvm),right after that I tried to start it and it won't start.
I mean it keep doing the startup animation for hours nonstop.
please help me!!!
:crying:
Click to expand...
Click to collapse
nothing can be done now you have to live with this guilt for the rest of your life
fahadsul3man said:
nothing can be done now you have to live with this guilt for the rest of your life
Click to expand...
Click to collapse
lol
google factory image flashing
talkChrisTucker said:
Today,actually everything was fine but,I tried to restart my Nexus cause of some issues(nvm),right after that I tried to start it and it won't start.
I mean it keep doing the startup animation for hours nonstop.
please help me!!!
:crying:
Click to expand...
Click to collapse
go and download google factory image from google developer site and install xda google nexus tool kit also then simple flash it every nexus problems solved ..i try and solve every problems
Within the power menu there used to be an option to reboot to recovery. Have these been removed in the Oreo beta? I don't see them anymore
You need to enable the power menu in developer settings.
iboyperson said:
Within the power menu there used to be an option to reboot to recovery. Have these been removed in the Oreo beta? I don't see them anymore
Click to expand...
Click to collapse
The option is called Advanced Reboot and has to be enabled in Developer Options first.
Solved thank you for the help!
Hi, I'm on nougat (xperia Z5) and i don't have the power menu in developer menu.
I'm on a custom Rom but based on stock firmware. I use the recovery very often and it's quite bothering to reboot manually in recovery.
Do you have any idea ??
Thanks
Tickle. said:
Hi, I'm on nougat (xperia Z5) and i don't have the power menu in developer menu.
I'm on a custom Rom but based on stock firmware. I use the recovery very often and it's quite bothering to reboot manually in recovery.
Do you have any idea ??
Thanks
Click to expand...
Click to collapse
If the rom your using does not include it ... There are 3rd party apps that can do the job. I have used "simple reboot for rooted users" (available in the playstore) before and found it works very well.
foomanjackel said:
If the rom your using does not include it ... There are 3rd party apps that can do the job. I have used "simple reboot for rooted users" (available in the playstore) before and found it works very well.
Click to expand...
Click to collapse
Thanks,
I had seen that kind of app on the play store but it didn't suit me a lot.
However, I found this app "nougat/oreo quick setting" which able to add a lot of toggles in the quick setting panel.
The reboot one as every reboot possible and it's perfectly integrated in the system since it's a quick setting.
jhs39 said:
You need to enable the power menu in developer settings.
Click to expand...
Click to collapse
ulxerker said:
The option is called Advanced Reboot and has to be enabled in Developer Options first.
Click to expand...
Click to collapse
no, it isn`t there with the latest beta
foreman31 said:
no, it isn`t there with the latest beta
Click to expand...
Click to collapse
Please make sure to look at the post date, it was last year... And last year there was this option, it's only gone since ob13 which is released since 2 days, 2018...
You can do it like I described here https://forum.xda-developers.com/on...nos-beta-1-android-oreo-t3710003/post76985727 or with any other 3rd party app if you don't want to hold both buttons for some seconds.